Imported Upstream version 1.1.1+rev1207upstream/1.1.1+rev1207

1 files changed, 14 insertions, 9 deletions

diff --git a/util/szap/README b/util/szap/README
index 5c83c67..a990357 100644
--- a/util/szap/README
+++ b/util/szap/README
@@ -5,23 +5,29 @@ and demux API. They are also pretty useful to test your hardware.
 
 For DVB-S, Astra Channel config file:
 
-$ ./szap -c channels.conf-dvbs-astra n24
+$ ./szap -c channels-conf/dvb-s/Astra-19.2E n24
 
 will tune to N24. For DVB-C, Berlin Cable channel config:
 
-$ ./czap -c channels.conf-dvbc-berlin Arte
+$ ./czap -c channels-conf/dvb-c/de-Berlin Arte
 
 For DVB-T, Berlin Config:
 
-$ ./czap -c channels.conf-dvbt-berlin phoenix
+$ ./tzap -c channels-conf/dvb-t/de-Berlin phoenix
 
-By default the MPEG stream is routed to a hardware decoder. If you want to 
-record the stream to disk you will route it to the DVR device by using the 
+For ATSC, Raleigh Durham Config:
+
+$ ./azap -c channels-conf/atsc/us-Raleigh-Durham WRAL
+
+will tune to WRAL's Digital Channel 5-1.
+
+By default the MPEG stream is routed to a hardware decoder. If you want to
+record the stream to disk you will route it to the DVR device by using the
 '-r' option:
 
-$ ./czap -c channels.conf-dvbt-berlin phoenix -r
+$ ./tzap -c channels-conf/dvb-t/de-Berlin phoenix -r
 [keep it running in one console]
-$ cat /dev/dvr/adapter0/dvr0 > /tmp/recording.ts
+$ cat /dev/dvb/adapter0/dvr0 > /tmp/recording.ts
 [in a second console, will dump the MPEG transport stream to /tmp/recording.ts]
 
 The status messages have the following meaning:
@@ -38,10 +44,9 @@ ber [0...0xffffffff]     --- Bit Error Rate. The less the better.
 unc [0...0xffffffff]     --- Number of Uncorrectable Blocks.
 			     Small numbers are Preferable.
 
-If everything is alright and all frontend circuits are working stable 
+If everything is alright and all frontend circuits are working stable
 (are locked) you should see a FE_HAS_LOCK in the rightmost line.
 
 Good luck,
 
 Holger
-