From ab959d7b4194715870128e616b8e29d4a101e488 Mon Sep 17 00:00:00 2001 From: etobi Date: Tue, 3 Sep 2013 09:48:41 +0200 Subject: Imported Upstream version 1.1.1+rev1207 --- util/szap/README | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'util/szap/README') diff --git a/util/szap/README b/util/szap/README index 5c83c67..a990357 100644 --- a/util/szap/README +++ b/util/szap/README @@ -5,23 +5,29 @@ and demux API. They are also pretty useful to test your hardware. For DVB-S, Astra Channel config file: -$ ./szap -c channels.conf-dvbs-astra n24 +$ ./szap -c channels-conf/dvb-s/Astra-19.2E n24 will tune to N24. For DVB-C, Berlin Cable channel config: -$ ./czap -c channels.conf-dvbc-berlin Arte +$ ./czap -c channels-conf/dvb-c/de-Berlin Arte For DVB-T, Berlin Config: -$ ./czap -c channels.conf-dvbt-berlin phoenix +$ ./tzap -c channels-conf/dvb-t/de-Berlin phoenix -By default the MPEG stream is routed to a hardware decoder. If you want to -record the stream to disk you will route it to the DVR device by using the +For ATSC, Raleigh Durham Config: + +$ ./azap -c channels-conf/atsc/us-Raleigh-Durham WRAL + +will tune to WRAL's Digital Channel 5-1. + +By default the MPEG stream is routed to a hardware decoder. If you want to +record the stream to disk you will route it to the DVR device by using the '-r' option: -$ ./czap -c channels.conf-dvbt-berlin phoenix -r +$ ./tzap -c channels-conf/dvb-t/de-Berlin phoenix -r [keep it running in one console] -$ cat /dev/dvr/adapter0/dvr0 > /tmp/recording.ts +$ cat /dev/dvb/adapter0/dvr0 > /tmp/recording.ts [in a second console, will dump the MPEG transport stream to /tmp/recording.ts] The status messages have the following meaning: @@ -38,10 +44,9 @@ ber [0...0xffffffff] --- Bit Error Rate. The less the better. unc [0...0xffffffff] --- Number of Uncorrectable Blocks. Small numbers are Preferable. -If everything is alright and all frontend circuits are working stable +If everything is alright and all frontend circuits are working stable (are locked) you should see a FE_HAS_LOCK in the rightmost line. Good luck, Holger - -- cgit v1.2.3