aboutsummaryrefslogtreecommitdiffstats
path: root/drv_HD44780.c
blob: 026160a9bd8da75285fdc723b3492f12b951c918 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
/* $Id: drv_HD44780.c,v 1.24 2004/06/01 06:45:29 reinelt Exp $
 *
 * new style driver for HD44780-based displays
 *
 * Copyright 1999-2004 Michael Reinelt <reinelt@eunet.at>
 * Copyright 2004 The LCD4Linux Team <lcd4linux-devel@users.sourceforge.net>
 *
 * Modification for 4-Bit mode
 * Copyright 2003 Martin Hejl (martin@hejl.de)
 *
 * Modification for 2nd controller support
 * Copyright 2003 Jesse Brook Kovach <jkovach@wam.umd.edu>
 *
 * This file is part of LCD4Linux.
 *
 * LCD4Linux is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * LCD4Linux is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *
 * $Log: drv_HD44780.c,v $
 * Revision 1.24  2004/06/01 06:45:29  reinelt
 *
 * some Fixme's processed
 * documented some code
 *
 * Revision 1.23  2004/05/31 05:38:02  reinelt
 *
 * fixed possible bugs with user-defined chars (clear high bits)
 * thanks to Andy Baxter for debugging the MilfordInstruments driver!
 *
 * Revision 1.22  2004/05/27 03:39:47  reinelt
 *
 * changed function naming scheme to plugin::function
 *
 * Revision 1.21  2004/05/26 11:37:36  reinelt
 *
 * Curses driver ported.
 *
 * Revision 1.20  2004/05/22 04:23:49  reinelt
 *
 * removed 16*x fix again (next time think before commit :-)
 *
 * Revision 1.19  2004/05/22 04:21:02  reinelt
 *
 * fix for display RAM layout on 16x4 displays (thanks to toxicated101)
 *
 * Revision 1.18  2004/03/20 07:31:32  reinelt
 * support for HD66712 (which has a different RAM layout)
 * further threading development
 *
 * Revision 1.17  2004/03/19 09:17:46  reinelt
 *
 * removed the extra 'goto' function, row and col are additional parameters
 * of the write() function now.
 *
 * Revision 1.16  2004/03/11 06:39:58  reinelt
 * big patch from Martin:
 * - reuse filehandles
 * - memory leaks fixed
 * - earlier busy-flag checking with HD44780
 * - reuse memory for strings in RESULT and hash
 * - netdev_fast to wavid time-consuming regex
 *
 * Revision 1.15  2004/03/03 03:47:04  reinelt
 * big patch from Martin Hejl:
 * - use qprintf() where appropriate
 * - save CPU cycles on gettimeofday()
 * - add quit() functions to free allocated memory
 * - fixed lots of memory leaks
 *
 * Revision 1.14  2004/03/01 04:29:51  reinelt
 * cfg_number() returns -1 on error, 0 if value not found (but default val used),
 *  and 1 if value was used from the configuration.
 * HD44780 driver adopted to new cfg_number()
 * Crystalfontz 631 driver nearly finished
 *
 * Revision 1.13  2004/02/15 21:43:43  reinelt
 * T6963 driver nearly finished
 * framework for graphic displays done
 * i2c_sensors patch from Xavier
 * some more old generation files removed
 *
 * Revision 1.12  2004/02/14 11:56:17  reinelt
 * M50530 driver ported
 * changed lots of 'char' to 'unsigned char'
 *
 * Revision 1.11  2004/02/04 19:10:51  reinelt
 * Crystalfontz driver nearly finished
 *
 * Revision 1.10  2004/02/02 05:22:16  reinelt
 * Brightness fpr Noritake Displays avaliable as a plugin
 *
 * Revision 1.9  2004/02/01 11:51:22  hejl
 * Fixes for busy flag
 *
 * Revision 1.8  2004/02/01 08:05:12  reinelt
 * Crystalfontz 633 extensions (CRC checking and stuff)
 * Models table for HD44780
 * Noritake VFD BVrightness patch from Bill Paxton
 *
 * Revision 1.7  2004/01/30 07:12:35  reinelt
 * HD44780 busy-flag support from Martin Hejl
 * loadavg() uClibc replacement from Martin Heyl
 * round() uClibc replacement from Martin Hejl
 * warning in i2c_sensors fixed
 * [
 *
 * Revision 1.6  2004/01/29 04:40:02  reinelt
 * every .c file includes "config.h" now
 *
 * Revision 1.5  2004/01/23 07:04:17  reinelt
 * icons finished!
 *
 * Revision 1.4  2004/01/23 04:53:48  reinelt
 * icon widget added (not finished yet!)
 *
 * Revision 1.3  2004/01/22 07:57:45  reinelt
 * several bugs fixed where segfaulting on layout>display
 * Crystalfontz driver optimized, 632 display already works
 *
 * Revision 1.2  2004/01/21 06:39:27  reinelt
 * HD44780 missed the "clear display' sequence
 * asc255bug handling added
 * HD44780 tested, works here!
 *
 * Revision 1.1  2004/01/20 15:32:49  reinelt
 * first version of Next Generation HD44780 (untested! but it compiles...)
 * some cleanup in the other drivers
 *
 */

/* 
 *
 * exported fuctions:
 *
 * struct DRIVER drv_HD44780
 *
 */

#include "config.h"

#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <unistd.h>
#include <termios.h>
#include <fcntl.h>
#include <sys/time.h>

#include "debug.h"
#include "cfg.h"
#include "udelay.h"
#include "plugin.h"
#include "widget.h"
#include "widget_text.h"
#include "widget_icon.h"
#include "widget_bar.h"
#include "drv.h"
#include "drv_generic_text.h"
#include "drv_generic_parport.h"

static char Name[]="HD44780";

static int Model;
static int Capabilities;

/* low level communication timings [nanoseconds]
 * as these values differ from spec to spec,
 * we use the worst-case values.
 */

#define T_CYCLE 1000 // Enable cycle time
#define T_PW     450 // Enable pulse width
#define T_AS      60 // Address setup time
#define T_H       40 // Data hold time
#define T_AH      20 // Address hold time


/* HD44780 execution timings [microseconds]
 * as these values differ from spec to spec,
 * we use the worst-case values.
 */

#define T_INIT1 4100 // first init sequence:  4.1 msec
#define T_INIT2  100 // second init sequence: 100 usec
#define T_EXEC    80 // normal execution time
#define T_WRCG   120 // CG RAM Write
#define T_CLEAR 1680 // Clear Display


static int Bits=0;
static int numControllers = 0;
static int allControllers = 0;
static int currController = 0;

static unsigned char SIGNAL_RW;
static unsigned char SIGNAL_RS;
static unsigned char SIGNAL_ENABLE;
static unsigned char SIGNAL_ENABLE2;
static unsigned char SIGNAL_GPO;

/* maximum time to wait for the busy-flag (in usec) */
#define MAX_BUSYFLAG_WAIT 100000
static int UseBusy = 0;


// Fixme: GPO's not yet implemented
static int GPOS;
// static int GPO=0;


typedef struct {
  int type;
  char *name;
  int capabilities;
} MODEL;

#define CAP_BRIGHTNESS (1<<0)
#define CAP_BUSY4BIT   (1<<1)
#define CAP_HD66712    (1<<2)

static MODEL Models[] = {
  { 0x01, "generic",  0 },
  { 0x02, "Noritake", CAP_BRIGHTNESS },
  { 0x03, "Soekris",  CAP_BUSY4BIT },
  { 0x04, "HD66712",  CAP_HD66712 },
  { 0xff, "Unknown",  0 }
};


// ****************************************
// ***  hardware dependant functions    ***
// ****************************************

static void wait_for_busy_flag(int controller)
{
  unsigned char enable;
  unsigned int counter;
  unsigned char data=0xFF;
  unsigned char busymask=0;

  if (Bits==8) {
    busymask = 0x80;
  } else {
    /* Since in 4-Bit mode DB0 on the parport is mapped to DB4 on the LCD
    (and consequently, DB3 on the partport is mapped to DB7 on the LCD)
    we need to listen for DB3 on the parport to go low
    */
    busymask = 0x8;
  }

  enable=SIGNAL_ENABLE;

  while (controller > 0) {
    if (controller&0x01 && enable!=0) {
      /* set data-lines to input*/
      drv_generic_parport_direction(1);
      
      if (Bits==8) {
        // Set RW, clear RS
        drv_generic_parport_control(SIGNAL_RW|SIGNAL_RS,SIGNAL_RW);
      } else {
        drv_generic_parport_data(SIGNAL_RW);
      }
      
      // Address set-up time
      ndelay(T_AS);
      
      // rise ENABLE
      if (Bits==8) {
        drv_generic_parport_control(enable,enable);
      } else {
        drv_generic_parport_data(SIGNAL_RW|enable);
      }

      counter=0;
      while (1) {
        /* read the busy flag */
        data = drv_generic_parport_read();
        if ((data&busymask)==0) break;

        /* make sure we don't wait forever
        - but only check after 5 iterations
        that way, we won't slow down normal mode
        (where we don't need the timeout anyway) */
        counter++;

        if (counter >= 5) {
          struct timeval now, end;

          if (counter == 5) {
            // determine the time when the timeout has expired
            gettimeofday (&end, NULL);
            end.tv_usec+=MAX_BUSYFLAG_WAIT;
            while (end.tv_usec>1000000) {
              end.tv_usec-=1000000;
              end.tv_sec++;
            }
          }

          // get the current time
          gettimeofday(&now, NULL);
          if (now.tv_sec==end.tv_sec?now.tv_usec>=end.tv_usec:now.tv_sec>=end.tv_sec) {
            error ("%s: timeout waiting for busy flag on controller %x (%x)", Name, controller, data);
            break;

          }
        }
      }

      // RS=low, RW=low, EN=low
      if (Bits==8) {
        // Lower EN
        drv_generic_parport_control(enable,0);

        // Address hold time
        ndelay(T_AH);

        drv_generic_parport_control(SIGNAL_RW|SIGNAL_RS,0);
      } else {
        // Lower EN
        drv_generic_parport_data(SIGNAL_RW);
        ndelay(T_AH);
        drv_generic_parport_data(0);
      }

      /* set data-lines to output*/
      drv_generic_parport_direction(0);
    }
    enable=SIGNAL_ENABLE2;
    controller=controller >> 1;
  }
}


static void drv_HD_nibble(unsigned char controller, unsigned char nibble)
{
  unsigned char enable;

  // enable signal: 'controller' is a bitmask
  // bit 0 .. send to controller #0
  // bit 1 .. send to controller #1
  // so we can send a byte to both controllers at the same time!
  enable=0;
  if (controller&0x01) enable|=SIGNAL_ENABLE;
  if (controller&0x02) enable|=SIGNAL_ENABLE2;
  
  // clear ENABLE
  // put data on DB1..DB4
  // nibble already contains RS bit!
  drv_generic_parport_data(nibble);

  // Address set-up time
  ndelay(T_AS);
  
  // rise ENABLE
  drv_generic_parport_data(nibble | enable);
  
  // Enable pulse width
  ndelay(T_PW);

  // lower ENABLE
  drv_generic_parport_data(nibble);
}


static void drv_HD_byte (unsigned char controller, unsigned char data, unsigned char RS)
{
  // send high nibble of the data
  drv_HD_nibble (controller, ((data>>4)&0x0f)|RS);

  // Make sure we honour T_CYCLE
  ndelay(T_CYCLE-T_AS-T_PW);

  // send low nibble of the data
  drv_HD_nibble(controller, (data&0x0f)|RS);
}


static void drv_HD_command (unsigned char controller, unsigned char cmd, int delay)
{
  unsigned char enable;

  if (UseBusy) wait_for_busy_flag(controller);

  if (Bits==8) {
    
    // enable signal: 'controller' is a bitmask
    // bit 0 .. send to controller #0
    // bit 1 .. send to controller #1
    // so we can send a byte to both controllers at the same time!
    enable=0;
    if (controller&0x01) enable|=SIGNAL_ENABLE;
    if (controller&0x02) enable|=SIGNAL_ENABLE2;
    
    // put data on DB1..DB8
    drv_generic_parport_data (cmd);
  
    // clear RW and RS
    drv_generic_parport_control (SIGNAL_RW | SIGNAL_RS, 0);
    
    // Address set-up time
    ndelay(T_AS);

    // send command
    drv_generic_parport_toggle (enable, 1, T_PW);
    
  } else {

    drv_HD_byte (controller, cmd, 0);

  }
  
  // wait for command completion
  if (!UseBusy) udelay(delay);
  
}


static void drv_HD_data (unsigned char controller, char *string, int len, int delay)
{
  unsigned char enable;

  // sanity check
  if (len<=0) return;

  if (Bits==8) {

    // enable signal: 'controller' is a bitmask
    // bit 0 .. send to controller #0
    // bit 1 .. send to controller #1
    // so we can send a byte to both controllers at the same time!
    enable=0;
    if (controller&0x01) enable|=SIGNAL_ENABLE;
    if (controller&0x02) enable|=SIGNAL_ENABLE2;
    
    if (!UseBusy) {
      // clear RW, set RS
      drv_generic_parport_control (SIGNAL_RW | SIGNAL_RS, SIGNAL_RS);
      // Address set-up time
      ndelay(T_AS);
    }
    
    while (len--) {

      if (UseBusy) {
	wait_for_busy_flag(controller);
	// clear RW, set RS
	drv_generic_parport_control (SIGNAL_RW | SIGNAL_RS, SIGNAL_RS);
	// Address set-up time
	ndelay(T_AS);
      }
      
      // put data on DB1..DB8
      drv_generic_parport_data (*(string++));
      
      // send command
      drv_generic_parport_toggle (enable, 1, T_PW);
      
      // wait for command completion
      if (!UseBusy) udelay(delay);
    }
    
  } else { // 4 bit mode
    
    while (len--) {
      if (UseBusy) wait_for_busy_flag(controller);

      // send data with RS enabled
      drv_HD_byte (controller, *(string++), SIGNAL_RS);
      
      // wait for command completion
      if (!UseBusy) udelay(delay);
    }
  }
}


static void drv_HD_goto (int row, int col)
{
  int pos;

  // handle multiple displays/controllers
  if (numControllers>1 && row>=DROWS/2) {
    row -= DROWS/2;
    currController = 2;
  } else {
    currController = 1;
  }
   
  // 16x1 Displays are organized as 8x2 :-(
  if (DCOLS==16 && DROWS==1 && col>7) {
    row++;
    col-=8;
  }
  
  if (Capabilities & CAP_HD66712) {
    // the HD66712 doesn't have a braindamadged RAM layout
    pos = row*32 + col;
  } else {
    // 16x4 Displays use a slightly different layout
    if (DCOLS==16 && DROWS==4) {
      pos = (row%2)*64+(row/2)*16+col;
    } else {  
      pos = (row%2)*64+(row/2)*20+col;
    }
  }
  drv_HD_command (currController, (0x80|pos), T_EXEC);
}


static void drv_HD_write (int row, int col, unsigned char *data, int len)
{
  drv_HD_goto (row, col);
  drv_HD_data (currController, data, len, T_EXEC);
}


static void drv_HD_defchar (int ascii, unsigned char *matrix)
{
  int i;
  unsigned char buffer[8];

  for (i = 0; i < 8; i++) {
    buffer[i] = matrix[i] & 0x1f;
  }
  
  // define chars on *both* controllers!
  drv_HD_command (allControllers, 0x40|8*ascii, T_EXEC);
  drv_HD_data (allControllers, buffer, 8, T_WRCG);
}


static int drv_HD_brightness (int brightness)
{
  char cmd;
  
  if (!(Capabilities & CAP_BRIGHTNESS)) return -1;

  if (brightness<0) brightness=0;
  if (brightness>3) brightness=3;

  cmd='0'+brightness;
  
  drv_HD_command (allControllers, 0x38, T_EXEC); // enable function
  drv_HD_data (allControllers, &cmd, 1, T_WRCG); // set brightness

  return brightness;
}

  
// Fixme: GPO's
#if 0
static void drv_HD_setGPO (int bits)
{
  if (Lcd.gpos>0) {
    
    // put data on DB1..DB8
    drv_generic_parport_data (bits);
    
    // 74HCT573 set-up time
    ndelay(20);
    
    // send data
    // 74HCT573 enable pulse width = 24ns
    drv_generic_parport_toggle (SIGNAL_GPO, 1, 230);
  }
}
#endif


static int drv_HD_start (char *section)
{
  char *model, *strsize;
  int rows=-1, cols=-1, gpos=-1;
  
  model=cfg_get(section, "Model", "generic");
  if (model!=NULL && *model!='\0') {
    int i;
    for (i=0; Models[i].type!=0xff; i++) {
      if (strcasecmp(Models[i].name, model)==0) break;
    }
    if (Models[i].type==0xff) {
      error ("%s: %s.Model '%s' is unknown from %s", Name, section, model, cfg_source());
      return -1;
    }
    Model=i;
    Capabilities=Models[Model].capabilities;
    info ("%s: using model '%s'", Name, Models[Model].name);
  } else {
    error ("%s: empty '%s.Model' entry from %s", Name, section, cfg_source());
    return -1;
  }
  free(model);

  strsize=cfg_get(section, "Size", NULL);
  if (strsize==NULL || *strsize=='\0') {
    error ("%s: no '%s.Size' entry from %s", Name, section, cfg_source());
    free(strsize);
    return -1;
  }
  if (sscanf(strsize,"%dx%d",&cols,&rows)!=2 || rows<1 || cols<1) {
    error ("%s: bad %s.Size '%s' from %s", Name, section, strsize, cfg_source());
    free(strsize);
    return -1;
  }
    
  if (cfg_number(section, "GPOs", 0, 0, 8, &gpos)<0) return -1;
  info ("%s: controlling %d GPO's", Name, gpos);

  if (cfg_number(section, "Controllers", 1, 1, 2, &numControllers)<0) return -1;
  info ("%s: using display with %d controllers", Name, numControllers);
  
  // current controller
  currController=1;
  
  // Bitmask for *all* Controllers
  allControllers = numControllers==2 ? 3 : 1;
  
  DROWS = rows;
  DCOLS = cols;
  GPOS  = gpos;
  
  if (cfg_number(section, "Bits", 8, 4, 8, &Bits)<0) return -1;
  if (Bits!=4 && Bits!=8) {
    error ("%s: bad %s.Bits '%s' from %s, should be '4' or '8'", Name, section, strsize, cfg_source());
    return -1;
  }    
  info ("%s: using %d bit mode", Name, Bits);
  
  if (drv_generic_parport_open(section, Name) != 0) {
    error ("%s: could not initialize parallel port!", Name);
    return -1;
  }

  if (Bits==8) {
    if ((SIGNAL_RS      = drv_generic_parport_wire_ctrl ("RS",      "AUTOFD"))==0xff) return -1;
    if ((SIGNAL_RW      = drv_generic_parport_wire_ctrl ("RW",      "GND"   ))==0xff) return -1;
    if ((SIGNAL_ENABLE  = drv_generic_parport_wire_ctrl ("ENABLE",  "STROBE"))==0xff) return -1;
    if ((SIGNAL_ENABLE2 = drv_generic_parport_wire_ctrl ("ENABLE2", "GND"   ))==0xff) return -1;
    if ((SIGNAL_GPO     = drv_generic_parport_wire_ctrl ("GPO",     "GND"   ))==0xff) return -1;
  } else {
    if ((SIGNAL_RS      = drv_generic_parport_wire_data ("RS",      "DB4"))==0xff) return -1;
    if ((SIGNAL_RW      = drv_generic_parport_wire_data ("RW",      "DB5"))==0xff) return -1;
    if ((SIGNAL_ENABLE  = drv_generic_parport_wire_data ("ENABLE",  "DB6"))==0xff) return -1;
    if ((SIGNAL_ENABLE2 = drv_generic_parport_wire_data ("ENABLE2", "GND"))==0xff) return -1;
    if ((SIGNAL_GPO     = drv_generic_parport_wire_data ("GPO",     "GND"))==0xff) return -1;
  }
  
  // clear all signals
  if (Bits==8) {
    drv_generic_parport_control (SIGNAL_RS|SIGNAL_RW|SIGNAL_ENABLE|SIGNAL_ENABLE2|SIGNAL_GPO, 0);
  } else {
    drv_generic_parport_data (0);
  }
  
  // set direction: write
  drv_generic_parport_direction (0);
  
  // initialize *both* displays
  if (Bits==8) {
    drv_HD_command (allControllers, 0x30, T_INIT1); // 8 Bit mode, wait 4.1 ms
    drv_HD_command (allControllers, 0x30, T_INIT2); // 8 Bit mode, wait 100 us
    drv_HD_command (allControllers, 0x38, T_EXEC);  // 8 Bit mode, 1/16 duty cycle, 5x8 font
  } else {
    drv_HD_nibble  (allControllers, 0x03); udelay(T_INIT1); // 4 Bit mode, wait 4.1 ms
    drv_HD_nibble  (allControllers, 0x03); udelay(T_INIT2); // 4 Bit mode, wait 100 us
    drv_HD_nibble  (allControllers, 0x03); udelay(T_INIT1); // 4 Bit mode, wait 4.1 ms
    drv_HD_nibble  (allControllers, 0x02); udelay(T_INIT2); // 4 Bit mode, wait 100 us
    drv_HD_command (allControllers, 0x28, T_EXEC);	    // 4 Bit mode, 1/16 duty cycle, 5x8 font
  }

  // maybe use busy-flag from now on 
  // (we can't use the busy flag during the init sequence)
  cfg_number(section, "UseBusy", 0, 0, 1, &UseBusy);
  
  // make sure we don't use the busy flag with RW wired to GND
  if (UseBusy && !SIGNAL_RW)   {
    error("%s: Busyflag is to be used, but RW is wired to GND", Name);
    UseBusy=0;
  }

  // make sure the display supports busy-flag checking in 4-Bit-Mode
  // at the moment this is inly possible with Martin Hejl's gpio driver,
  // which allows to use 4 bits as input and 4 bits as output
  if (UseBusy && Bits==4 && !(Capabilities&CAP_BUSY4BIT)) {
    error("%s: Model '%s' does not support busy-flag checking in 4-bit-mode", Name, Models[Model].name);
    UseBusy=0;
  }
  
  info("%s: %susing busy-flag checking", Name, UseBusy?"":"not ");
  free(strsize);

  drv_HD_command (allControllers, 0x08, T_EXEC);  // Display off, cursor off, blink off
  drv_HD_command (allControllers, 0x0c, T_CLEAR); // Display on, cursor off, blink off, wait 1.64 ms
  drv_HD_command (allControllers, 0x06, T_EXEC);  // curser moves to right, no shift

  if ((Capabilities & CAP_HD66712) && DROWS > 2) {
    drv_HD_command (allControllers, Bits==8?0x3c:0x2c, T_EXEC); // set extended register enable bit
    drv_HD_command (allControllers, 0x09,              T_EXEC); // set 4-line mode
    drv_HD_command (allControllers, Bits==8?0x38:0x28, T_EXEC); // clear extended register enable bit
  }

  drv_HD_command (allControllers, 0x01, T_CLEAR); // clear *both* displays
  drv_HD_command (allControllers, 0x03, T_CLEAR); // return home
  
  // maybe set brightness
  if (Capabilities & CAP_BRIGHTNESS) {
    int brightness;
    if (cfg_number(section, "Brightness", 0, 0, 3, &brightness)>0) {
      drv_HD_brightness(brightness);
    }
  }

  return 0;
}


// ****************************************
// ***            plugins               ***
// ****************************************


static void plugin_brightness (RESULT *result, RESULT *arg1)
{
  double brightness;
  
  brightness=drv_HD_brightness(R2N(arg1));
  SetResult(&result, R_NUMBER, &brightness); 
}


// ****************************************
// ***        widget callbacks          ***
// ****************************************


// using drv_generic_text_draw(W)
// using drv_generic_text_icon_draw(W)
// using drv_generic_text_bar_draw(W)


// ****************************************
// ***        exported functions        ***
// ****************************************


// list models
int drv_HD_list (void)
{
  int i;
  
  for (i=0; Models[i].type!=0xff; i++) {
    printf ("%s ", Models[i].name);
  }
  return 0;
}


// initialize driver & display
int drv_HD_init (char *section)
{
  WIDGET_CLASS wc;
  int asc255bug;
  int ret;  
  
  // display preferences
  XRES  = 5;      // pixel width of one char 
  YRES  = 8;      // pixel height of one char 
  CHARS = 8;      // number of user-defineable characters
  CHAR0 = 0;      // ASCII of first user-defineable char
  GOTO_COST = 2;  // number of bytes a goto command requires
  
  // real worker functions
  drv_generic_text_real_write   = drv_HD_write;
  drv_generic_text_real_defchar = drv_HD_defchar;


  // start display
  if ((ret=drv_HD_start (section))!=0)
    return ret;
  
  // initialize generic text driver
  if ((ret=drv_generic_text_init(section, Name))!=0)
    return ret;

  // initialize generic icon driver
  if ((ret=drv_generic_text_icon_init())!=0)
    return ret;
  
  // initialize generic bar driver
  if ((ret=drv_generic_text_bar_init(0))!=0)
    return ret;
  
  // add fixed chars to the bar driver
  // most displays have a full block on ascii 255, but some have kind of 
  // an 'inverted P'. If you specify 'asc255bug 1 in the config, this
  // char will not be used, but rendered by the bar driver
  cfg_number(section, "asc255bug", 0, 0, 1, &asc255bug);
  drv_generic_text_bar_add_segment (  0,  0,255, 32); // ASCII  32 = blank
  if (!asc255bug) 
    drv_generic_text_bar_add_segment (255,255,255,255); // ASCII 255 = block
  
  // register text widget
  wc=Widget_Text;
  wc.draw=drv_generic_text_draw;
  widget_register(&wc);
  
  // register icon widget
  wc=Widget_Icon;
  wc.draw=drv_generic_text_icon_draw;
  widget_register(&wc);
  
  // register bar widget
  wc=Widget_Bar;
  wc.draw=drv_generic_text_bar_draw;
  widget_register(&wc);
  
  // register plugins
  if (Capabilities & CAP_BRIGHTNESS)
    AddFunction ("LCD::brightness", 1, plugin_brightness);
  
  return 0;
}


// close driver & display
int drv_HD_quit (void) {

  info("%s: shutting down.", Name);
  drv_generic_parport_close();
  drv_generic_text_quit();
  
  return (0);
}


DRIVER drv_HD44780 = {
  name: Name,
  list: drv_HD_list,
  init: drv_HD_init,
  quit: drv_HD_quit, 
};