#!/bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd="$cpprog"
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd="$stripprog"
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
true
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d $dst ]; then
instcmd=:
chmodcmd=""
else
instcmd=mkdir
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f $src -o -d $src ]
then
true
else
echo "install: $src does not exist"
exit 1
fi
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
true
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
true
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
true
fi
pathcomp="${pathcomp}/"
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
true
fi
# Make a temp file name in the proper directory.
dsttmp=$dstdir/#inst.$$#
# Move or copy the file name to the temp name
$doit $instcmd $src $dsttmp &&
trap "rm -f ${dsttmp}" 0 &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
# Now rename the file to the real destination.
$doit $rmcmd -f $dstdir/$dstfile &&
$doit $mvcmd $dsttmp $dstdir/$dstfile
fi &&
exit 0
00-08-10| [lcd4linux @ 2000-08-10 09:44:09 by reinelt] | reinelt | 21 | -1068/+1162 |
|
new debugging scheme: error(), info(), debug()
uses syslog if in daemon mode
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@64 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
new switch -F (do not fork)
added automatic forking if -F not specified
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@63 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
fixed a bug in system.c where the format of /proc/net/dev was not correctly
detected and parsed with different kernels
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@62 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
opened 0.98 development
removed driver-specific signal-handlers
added 'quit'-function to driver structure
added global signal-handler
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@61 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
some changes to support kernel-2.4 (different layout of various files in /proc)
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@60 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
eliminated some compiler warnings with glibc
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@59 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
minor bugfix (zero length)
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@58 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added ppp throughput
token is '%t[iomt]' at the moment, but this will change in the near future
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@57 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@56 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@55 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
Crystalfontz initial coding
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@54 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
driver for 3Com Palm Pilot added
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@53 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
bars for Beckmann+Egle driver
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@52 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
first release of the Beckmann+Egle driver
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@51 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added documentation to EXTRA_DIST so that they go into the tarball
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@50 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
README for HD44780 driver
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@49 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added README.44780
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@48 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
moved delay loops to udelay.c
renamed -d (debugging) switch to -v (verbose)
new switch -d to calibrate delay loop
'Delay' entry for HD44780 back again
delay loops will not calibrate automatically, because this will fail with hich CPU load
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@47 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
more debug messages
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@46 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added '-d' (debugging) switch
added several debugging messages
removed config entry 'Delay' for HD44780 driver
delay loop for HD44780 will be calibrated automatically
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@45 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added BogoMips() to system.c (not used by now, maybe sometimes we can
calibrate our delay loop with this value)
added delay loop to HD44780 driver. It seems to be quite fast now. Hopefully
no compiler will optimize away the delay loop!
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@44 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
first version of the HD44780 driver
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@43 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
minor changes and cleanups
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@42 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
UUCP style lockfiles for the serial port
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@41 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
fixed bug in XWindow.c: union semun isn't defined with glibc-2.1
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@40 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|