#!/bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd="$cpprog"
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd="$stripprog"
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
true
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d $dst ]; then
instcmd=:
chmodcmd=""
else
instcmd=mkdir
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f $src -o -d $src ]
then
true
else
echo "install: $src does not exist"
exit 1
fi
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
true
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
true
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
true
fi
pathcomp="${pathcomp}/"
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
true
fi
# Make a temp file name in the proper directory.
dsttmp=$dstdir/#inst.$$#
# Move or copy the file name to the temp name
$doit $instcmd $src $dsttmp &&
trap "rm -f ${dsttmp}" 0 &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
# Now rename the file to the real destination.
$doit $rmcmd -f $dstdir/$dstfile &&
$doit $mvcmd $dsttmp $dstdir/$dstfile
fi &&
exit 0
7 06:56:55 +0000'>2004-06-07| [lcd4linux @ 2004-06-07 06:56:55 by reinelt] | reinelt | 5 | -7/+149 |
|
added test plugin from Andy Baxter
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@467 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
do not display end splash screen if quiet=1
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@466 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
Cwlinux splash screen fixed
USBLCD splash screen fixed
plugin_i2c qprintf("%f") replaced with snprintf()
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@465 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
chancged splash screen again
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@464 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
splash screen for all text-based display drivers
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@463 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
splash screen for HD44780
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@462 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
prepared support for startup splash screen
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@461 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
extended contrast range for Crystalfontz
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@460 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added i2c_sensors example to lcd4linux.conf.sample
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@459 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added documentation tree
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@458 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
fixed models listing for Beckmann+Egle driver
some cosmetic changes
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@457 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
some Fixme's processed
documented some code
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@456 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
made README.Plugins and plugin_sample up to date.
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@455 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
some cleanups in the MatrixOrbital driver
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@454 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
fixed lots of bugs in the Cwlinux driver
do not emit EAGAIN error on the first retry
made plugin_i2c_sensors a bit less 'chatty'
moved init and exit functions to the bottom of plugin_pop3
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@453 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added NULL display driver (for debugging/profiling purposes)
added backlight/contrast initialisation for matrixOrbital
added Backlight initialisation for Cwlinux
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@452 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
ChangeLog update
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@451 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
fixed symlink security issue with the image driver
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@450 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
fixed possible bugs with user-defined chars (clear high bits)
thanks to Andy Baxter for debugging the MilfordInstruments driver!
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@449 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
fixed bug in Milford Instruments driver which drew extra graphics chars in
odd places when drawing double bars. (the display doesn't like it if you put
the escape character 0xfe inside a define char sequence).
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@448 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
Crystalfontz 631 driver finished
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@447 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
fixed a compiler issue with drv_Image.c (thanks to Frank Stratmann)
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@446 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
M50530: reset parport signals on exit
plugin_ppp: ppp() has two parameters, not three
lcd4linux.conf.sample: diskstats() corrected
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@445 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
bug in plugin_diskstats fixed
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@444 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added plugin_diskstats.c
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@443 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
Status and Changelog Update
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@442 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|