#!/bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd="$cpprog"
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd="$stripprog"
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
true
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d $dst ]; then
instcmd=:
chmodcmd=""
else
instcmd=mkdir
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f $src -o -d $src ]
then
true
else
echo "install: $src does not exist"
exit 1
fi
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
true
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
true
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
true
fi
pathcomp="${pathcomp}/"
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
true
fi
# Make a temp file name in the proper directory.
dsttmp=$dstdir/#inst.$$#
# Move or copy the file name to the temp name
$doit $instcmd $src $dsttmp &&
trap "rm -f ${dsttmp}" 0 &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
# Now rename the file to the real destination.
$doit $rmcmd -f $dstdir/$dstfile &&
$doit $mvcmd $dsttmp $dstdir/$dstfile
fi &&
exit 0
5-12 14:55:47 by reinelt]| reinelt | 2 | -6/+114 |
|
plugins for serdisplib driver
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@551 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
serdisplib GET_VERSION_MAJOR macro
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@550 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
small serdisplib bugs fixed
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@549 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added serdisplib driver
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@548 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
CodingStyle added and applied
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@547 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
python2.4 added to python.m4
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@546 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
hollow bar patch from geronet
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@545 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
remove documentation pass#2
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@544 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
removed documentation again :-(
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@543 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
changed SELECT to SLCTIN
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@542 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
Driver modified according to Michels's recommendations :
- Suppressed linux/parport.h depandancy. It was not needed anyway.
- Compile-time disable the wait_busy polling function, replaced with a time wait.
- Replaced the hardwire_* calls by their wire_* equivalent, to adapt other wirings.
- Created a "Models" structure, containing parameters for the display.
- Other cleanups, to remove compile-time warnings.
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@541 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
parport_wire_status() added
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@540 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
Noritake driver added
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@539 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
* replaced fprintf(stderr,... with error()
* corrected a "dangling reference" memory problem
* removed some PyErr_Print() spam
* fixed a segmentation fault that occured when python module was not
found
* improved error messages
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@538 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
rearranged autoconf a bit,
libX11 will be linked only if really needed (i.e. when the X11 driver has been selected)
plugin_python filled with life
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@537 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
preparations for python bindings and python plugin
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@536 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
make busy-flag checking configurable for LCD-Linux driver
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@535 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
LCD-Linux display size set up from lcd4linux.conf
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@534 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
Trefon Backlight added
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@533 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
Changelog updated
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@532 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
driver for TREFON USB LCD's added
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@531 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
Changed the code to add some VT100-compatible control sequences (see the comments above).
A configfile boolean option 'VT100_Support' (default to 1) indicate if the display in
used support these control-sequences or not.
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@530 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
updated LCD-Linux driver to version 0.8.8
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@529 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
AC_CHECK_HEADERS corrected
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@528 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
i2c patch from Paul (still does not work here :-(
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@527 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
ceil/floor patch from Maxime
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@526 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
to be compatible with gcc 2.95
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@525 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added statfs plugin
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@524 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
fixed gcc4 warnings about signed/unsigned mismatches
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@523 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
moved plugin init stuff to a seperate function called on first use
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@522 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
Evaluator speedup: use bsearch for finding functions and variables
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@521 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
HD44780 multiple displays patch from geronet
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@520 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
HD44780/I2C patch from Luis merged (still does not work for me)
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@519 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
HD44780 Backlight fixed (thanks to geronet)
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@518 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
fixed some signed/unsigned char mismatches in the Crystalfontz driver (ticket #12)
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@517 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
ChangeLog
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@516 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
SimpleLCD driver added
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@515 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
LCD-Linux driver GOTO_COST corrected
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@514 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
driver for LCD-Linux finished
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@513 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
minor HD44780 cleanups
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@512 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
LCD-Linux driver added
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@511 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
MatrixOrbital backlight micro-fix
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@510 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added (C) to all copyright statements
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@509 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
info about backlight and brightness
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@508 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|
|
added software-controlled backlight support to HD44780
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@507 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
|