# # $Id: README.MatrixOrbital,v 1.2 2000/03/22 07:33:50 reinelt Exp $ # This is the README file for the MatrixOrbital display driver for lcd4linux This driver supports the serial interface alphanumeric display modules by Matrix Orbital Corporation (http://www.matrixorbital.com). I could only test it with the LCD2041 model, but I think every other (LCD) model should work. These displays are supported: LCD0821: 2 lines by 8 characters LCD1621: 2 lines by 16 characters LCD2021: 2 lines by 20 characters LCD2041: 4 lines by 20 characters (tested) LCD4021: 2 lines by 40 characters I could not test the vacuum fluorescent display models, but I think they should work, too. There are no entries for this models in the driver table (at the bottom of MatrixOrbital.c), but they could be easily added. The displays come with an RS-232 and an I2C interface. The driver supports the RS-232 interface only (because I have no idea how to find the I2C bus on my motherboard). Power can be applied either via an external DC power supply, a modified floppy power connector (be aware that you can destroy your display if you get the pins wrong!) or via the RI (ring) signal of the RS-232 port. I choosed the latter, and modified a serial card so that it supplies +5V from the ISA bus to this pin (again, be aware that this is dangerous if you connect any other serial device to this modified port). The driver supports vertical, horizontal and split bars (two independent bars in one line), all bar types can be used simultanously. As the displays only have 8 user-defined characters, the needed characters to display all the bars must be reduced to 8. This is done by replacing characters with similar ones. To reduce flicker, a character which is displayed at the moment, will not be redefined, even if it's not used in this run. Only if the character compaction fails, this characters will be redefined, too. The displays have a GPO (general purpose output), where you can connect a LED or something. The driver supports controlling this GPO, but this function is unused by now. Configuration: The driver needs/supports the following entries in lcd4linux.conf: Display: a valid Matrix Orbital Display name (e.g. "LCD2041") Port: serial device the display is attached to (e.g. /dev/ttyS2) Speed: the baud rate from the display (configured via jumpers) must match this value. Possible values are 1200, 2400, 9600 and 19200 Contrast: sets the LCD display contrast to a level between 0 (light) and 256 (dark). Default value: 160 cd4linux.git/log/plugin_proc_stat.c?h=master&id=fdf19a1a522ce857a7ef1f12c8628e087d424b93&showmsg=1&follow=1'>plugin_proc_stat.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2007-06-20maximum value for brightness is 8volker1-2/+2
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@808 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-06-17buttons for X11 driver (thanks to Volker Gering)michael1-8/+49
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@807 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-06-17Apple has no utsbuf.domainname (thanks to Volker Gering)michael1-1/+1
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@806 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-06-17strndup() replacementmichael1-0/+24
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@805 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-06-17better usage output by Volker Geringmichael1-4/+20
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@804 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-06-08Image driver libgd dependancy fixmichael5-6/+31
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@803 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-06-04big MPD patch from Robert Buchholzmichael1-79/+86
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@802 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-05-19gps plugin, code by michu / www.neophob.commichael7-0/+580
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@801 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-05-17compile error on m68k fixed (debian bug 405898)michael3-10/+170
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@799 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-05-04typo in LUIse driver fixedmichael1-1/+1
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@798 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-05-02some compiler warnings fixedmichael6-8/+14
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@797 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-04-30LCD4Linux-0.10.1-RC2michael1-1/+1
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@796 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-04-30ChangeLog updatedmichael1-1782/+3099
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@795 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
2007-04-30svn2cl moved and optimizedmichael1-6/+0
git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@794 3ae390bd-cb1e-0410-b409-cd5a39f66f1f