From 375f6357d29718fdf9ccadfbb21d1488308295b4 Mon Sep 17 00:00:00 2001 From: harbaum Date: Thu, 9 Feb 2006 20:32:49 +0000 Subject: [lcd4linux @ 2006-02-09 20:32:49 by harbaum] LCD2USB bus testing, version verification ... git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@636 3ae390bd-cb1e-0410-b409-cd5a39f66f1f --- drv_LCD2USB.c | 148 +++++++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 131 insertions(+), 17 deletions(-) (limited to 'drv_LCD2USB.c') diff --git a/drv_LCD2USB.c b/drv_LCD2USB.c index 5dd8de4..fba1aa7 100644 --- a/drv_LCD2USB.c +++ b/drv_LCD2USB.c @@ -1,4 +1,4 @@ -/* $Id: drv_LCD2USB.c,v 1.4 2006/01/30 20:21:51 harbaum Exp $ +/* $Id: drv_LCD2USB.c,v 1.5 2006/02/09 20:32:49 harbaum Exp $ * * driver for USB2LCD display interface * see http://www.harbaum.org/till/lcd2usb for schematics @@ -24,6 +24,9 @@ * * * $Log: drv_LCD2USB.c,v $ + * Revision 1.5 2006/02/09 20:32:49 harbaum + * LCD2USB bus testing, version verification ... + * * Revision 1.4 2006/01/30 20:21:51 harbaum * LCD2USB: Added support for displays with two controllers * @@ -95,13 +98,14 @@ /* target is value to get */ #define LCD_GET_FWVER (LCD_GET | (0<<3)) -#define LCD_GET_KEYS (LCD_GET | (1<<3)) -#define LCD_GET_RESERVED0 (LCD_GET | (2<<3)) +#define LCD_GET_BUTTONS (LCD_GET | (1<<3)) +#define LCD_GET_CTRL (LCD_GET | (2<<3)) #define LCD_GET_RESERVED1 (LCD_GET | (3<<3)) static char Name[] = "LCD2USB"; static usb_dev_handle *lcd; +static int controllers = 0; extern int usb_debug; extern int got_signal; @@ -172,6 +176,110 @@ static int drv_L2U_send(int request, int value, int index) return 0; } +/* send a number of 16 bit words to the lcd2usb interface */ +/* and verify that they are correctly returned by the echo */ +/* command. This may be used to check the reliability of */ +/* the usb interfacing */ +#define ECHO_NUM 100 + +int drv_L2U_echo(void) +{ + int i, nBytes, errors = 0; + unsigned short val, ret; + + for (i = 0; i < ECHO_NUM; i++) { + val = rand() & 0xffff; + + nBytes = usb_control_msg(lcd, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_IN, + LCD_ECHO, val, 0, (char *) &ret, sizeof(ret), 1000); + + if (nBytes < 0) { + error("%s: USB request failed!", Name); + return -1; + } + + if (val != ret) + errors++; + } + + if (errors) { + error("%s: ERROR, %d out of %d echo transfers failed!", Name, errors, ECHO_NUM); + return -1; + } else + info("%s: echo test successful", Name); + + return 0; +} + +/* get a value from the lcd2usb interface */ +static int drv_L2U_get(unsigned char cmd) +{ + unsigned char buffer[2]; + int nBytes; + + /* send control request and accept return value */ + nBytes = usb_control_msg(lcd, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_IN, + cmd, 0, 0, (char *) buffer, sizeof(buffer), 1000); + + if (nBytes < 0) { + error("%s: USB request failed!", Name); + return -1; + } + + return buffer[0] + 256 * buffer[1]; +} + +/* get lcd2usb interface firmware version */ +static void drv_L2U_get_version(void) +{ + int ver = drv_L2U_get(LCD_GET_FWVER); + + if (ver != -1) + info("%s: firmware version %d.%d", Name, ver & 0xff, ver >> 8); + else + error("%s: unable to read firmware version", Name); +} + +/* get the bit mask of installed LCD controllers (0 = no */ +/* lcd found, 1 = single controller display, 3 = dual */ +/* controller display */ +static void drv_L2U_get_controllers(void) +{ + controllers = drv_L2U_get(LCD_GET_CTRL); + + if (controllers != -1) { + if (controllers) + info("%s: installed controllers: %s%s", Name, + (controllers & 1) ? "CTRL0" : "", (controllers & 2) ? " CTRL1" : ""); + else + error("%s: no controllers found", Name); + } else { + error("%s: unable to read installed controllers", Name); + controllers = 0; // don't access any controllers + } + + // convert into controller map matching our protocol + controllers = ((controllers & 1) ? LCD_CTRL_0 : 0) | ((controllers & 2) ? LCD_CTRL_1 : 0); +} + +/* get state of the two optional buttons */ +static unsigned long drv_L2U_get_buttons(void) +{ + int buttons = drv_L2U_get(LCD_GET_BUTTONS); + + if (buttons != -1) + info("%s: button state 0:%s 1:%s", Name, (buttons & 1) ? "on" : "off", (buttons & 2) ? "on" : "off"); + else { + error("%s: unable to read button state", Name); + buttons = 0; + } + + return buttons; +} + + /* to increase performance, a little buffer is being used to */ /* collect command bytes of the same type before transmitting them */ #define BUFFER_MAX_CMD 4 /* current protocol supports up to 4 bytes */ @@ -206,8 +314,10 @@ static void drv_L2U_flush(void) value = buffer[0] | (buffer[1] << 8); index = buffer[2] | (buffer[3] << 8); - /* send current buffer contents */ - drv_L2U_send(request, value, index); + if (controllers) { + /* send current buffer contents */ + drv_L2U_send(request, value, index); + } /* buffer is now free again */ buffer_current_type = -1; @@ -231,7 +341,7 @@ static void drv_L2U_enqueue(int command_type, int value) static void drv_L2U_command(const unsigned char ctrl, const unsigned char cmd) { - drv_L2U_enqueue(LCD_CMD | ctrl, cmd); + drv_L2U_enqueue(LCD_CMD | (ctrl & controllers), cmd); } @@ -263,7 +373,7 @@ static void drv_L2U_write(int row, const int col, const char *data, int len) drv_L2U_command(ctrl, 0x80 | pos); while (len--) { - drv_L2U_enqueue(LCD_DATA | ctrl, *data++); + drv_L2U_enqueue(LCD_DATA | (ctrl & controllers), *data++); } drv_L2U_flush(); @@ -276,7 +386,7 @@ static void drv_L2U_defchar(const int ascii, const unsigned char *matrix) drv_L2U_command(LCD_BOTH, 0x40 | 8 * ascii); for (i = 0; i < 8; i++) { - drv_L2U_enqueue(LCD_DATA | LCD_BOTH, *matrix++ & 0x1f); + drv_L2U_enqueue(LCD_DATA | (LCD_BOTH & controllers), *matrix++ & 0x1f); } drv_L2U_flush(); @@ -331,13 +441,18 @@ static int drv_L2U_start(const char *section, const int quiet) error("%s: could not find a LCD2USB USB LCD", Name); return -1; } -#if 0 // already done by driver - /* initialize display */ - drv_L2U_command(LCD_BOTH, 0x29); /* 8 Bit mode, 1/16 duty cycle, 5x8 fnt */ - drv_L2U_command(LCD_BOTH, 0x08); /* Display off, cursor off, blink off */ - drv_L2U_command(LCD_BOTH, 0x0c); /* Display on, cursor off, blink off */ - drv_L2U_command(LCD_BOTH, 0x06); /* curser moves to right, no shift */ -#endif + + /* test interface reliability */ + drv_L2U_echo(); + + /* get some infos from the interface */ + drv_L2U_get_version(); + drv_L2U_get_controllers(); + if (!controllers) + return -1; + + /* call get_buttons to make compiler happy ... */ + drv_L2U_get_buttons(); if (cfg_number(section, "Contrast", 0, 0, 255, &contrast) > 0) { drv_L2U_contrast(contrast); @@ -414,7 +529,7 @@ int drv_L2U_init(const char *section, const int quiet) int asc255bug; int ret; - info("%s: %s", Name, "$Revision: 1.4 $"); + info("%s: %s", Name, "$Revision: 1.5 $"); /* display preferences */ XRES = 5; /* pixel width of one char */ @@ -427,7 +542,6 @@ int drv_L2U_init(const char *section, const int quiet) drv_generic_text_real_write = drv_L2U_write; drv_generic_text_real_defchar = drv_L2U_defchar; - /* start display */ if ((ret = drv_L2U_start(section, quiet)) != 0) return ret; -- cgit v1.2.3