diff options
Diffstat (limited to 'drv_Noritake.c')
-rw-r--r-- | drv_Noritake.c | 120 |
1 files changed, 84 insertions, 36 deletions
diff --git a/drv_Noritake.c b/drv_Noritake.c index 5cd19ae..65a9d72 100644 --- a/drv_Noritake.c +++ b/drv_Noritake.c @@ -1,4 +1,4 @@ -/* $Id: drv_Noritake.c,v 1.1 2005/05/04 05:42:38 reinelt Exp $ +/* $Id: drv_Noritake.c,v 1.2 2005/05/04 07:18:44 obconseil Exp $ * * Driver for a Noritake GU128x32-311 graphical display. * @@ -22,6 +22,15 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * $Log: drv_Noritake.c,v $ + * Revision 1.2 2005/05/04 07:18:44 obconseil + * Driver modified according to Michels's recommendations : + * + * - Suppressed linux/parport.h depandancy. It was not needed anyway. + * - Compile-time disable the wait_busy polling function, replaced with a time wait. + * - Replaced the hardwire_* calls by their wire_* equivalent, to adapt other wirings. + * - Created a "Models" structure, containing parameters for the display. + * - Other cleanups, to remove compile-time warnings. + * * Revision 1.1 2005/05/04 05:42:38 reinelt * Noritake driver added * @@ -80,17 +89,34 @@ #include "udelay.h" #include "drv_generic_text.h" #include "drv_generic_parport.h" -#include <linux/parport.h> - static char Name[]="Noritake"; + +typedef struct { + int type; + char *name; + int rows; + int cols; + int xres; + int yrex; + int goto_cost; + int protocol; +} MODEL; + +static int Model,Protocol; +static MODEL Models[] = { + { 0x01, "GU311", 4, 21, 6, 8, 5, 1 }, + { 0x02, "GU311_Graphic", 4, 21, 6, 8, 6, 1 }, + { 0xff, "Unknown", -1, -1, -1, -1, -1, -1 } +}; + static unsigned char SIGNAL_CS; /* Chip select, OUTPUT, negative logic, pport AUTOFEED */ static unsigned char SIGNAL_WR; /* Write OUTPUT, negative logic, pport STOBE */ static unsigned char SIGNAL_RESET; /* Reset, OUTPUT, negative logic, pport INIT */ static unsigned char SIGNAL_BLANK; /* Blank, OUTPUT , negative logic, pport SELECT-IN */ -static unsigned char SIGNAL_BUSY; /* Busy, INPUT , positive logic, pport BUSY,*/ -static unsigned char SIGNAL_FRP; /* Frame Pulse, INPUT , positive logic, pport ACK, not used */ +/* static unsigned char SIGNAL_BUSY;*/ /* Busy, INPUT , positive logic, pport BUSY, not used */ +/* static unsigned char SIGNAL_FRP;*/ /* Frame Pulse, INPUT , positive logic, pport ACK, not used */ void (*drv_Noritake_clear) (void) ; /* Data port is positive logic */ @@ -102,6 +128,10 @@ void (*drv_Noritake_clear) (void) ; /* Low-level parport driving functions */ +/* This function was used to pool the BUSY line on the parallel port, which +can be linked to the BUSY line on the display. But since it works +with a timed wait, this function is not necessary, and is kept just in case.*/ +#if 0 static void drv_GU311_wait_busy(void) { char c; @@ -114,6 +144,8 @@ static void drv_GU311_wait_busy(void) c = drv_generic_parport_status(); } } +#endif + static void drv_GU311_send_char(char c) { @@ -181,23 +213,18 @@ static void drv_GU311_reset (void) } -static int drv_GU311_start(const char *section, const int quiet) +static int drv_GU311_start(const char *section) { char cmd[3] = { 0x01, 'O' }; - DROWS = 4; - DCOLS = 21; - /* real worker functions */ - drv_generic_text_real_write = drv_GU311_write; - drv_Noritake_clear = drv_GU311_clear; /* Parallel port opening and association */ if (drv_generic_parport_open(section, Name) < 0) return -1; - if ((SIGNAL_CS=drv_generic_parport_hardwire_ctrl ("CS", "AUTOFD"))==0xff) return -1; - if ((SIGNAL_WR=drv_generic_parport_hardwire_ctrl ("WR", "STROBE"))==0xff) return -1; - if ((SIGNAL_RESET=drv_generic_parport_hardwire_ctrl ("RESET", "INIT"))==0xff) return -1; - if ((SIGNAL_BLANK=drv_generic_parport_hardwire_ctrl ("BLANK", "SELECT") )==0xff) return -1; - SIGNAL_BUSY=PARPORT_STATUS_BUSY; - SIGNAL_FRP=PARPORT_STATUS_ACK; + if ((SIGNAL_CS=drv_generic_parport_wire_ctrl ("CS", "AUTOFD"))==0xff) return -1; + if ((SIGNAL_WR=drv_generic_parport_wire_ctrl ("WR", "STROBE"))==0xff) return -1; + if ((SIGNAL_RESET=drv_generic_parport_wire_ctrl ("RESET", "INIT"))==0xff) return -1; + if ((SIGNAL_BLANK=drv_generic_parport_wire_ctrl ("BLANK", "SELECT") )==0xff) return -1; + /* SIGNAL_BUSY=PARPORT_STATUS_BUSY; */ /* Not currently needed */ + /* SIGNAL_FRP=PARPORT_STATUS_ACK; */ /* Not currently needed */ /* Signals configuration */ drv_generic_parport_direction(0); /* parallel port in output mode */ @@ -220,18 +247,47 @@ static int drv_GU311_start(const char *section, const int quiet) -static int drv_Noritake_start (const char *section, const int quiet) +static int drv_Noritake_start (const char *section) { char * model=0; - - - model = cfg_get(section,"Model","GU311"); - - if ( model && (strcasecmp("GU311",model) == 0) ) - return drv_GU311_start(section,quiet); + int i; + model=cfg_get(section, "Model", NULL); + if (model!=NULL && *model!='\0') { + for (i=0; Models[i].type!=0xff; i++) { + if (strcasecmp(Models[i].name, model)==0) break; + } + if (Models[i].type==0xff) { + error ("%s: %s.Model '%s' is unknown from %s", Name, section, model, cfg_source()); + return -1; + } + Model=i; + info ("%s: using model '%s'", Name, Models[Model].name); + } else { + error ("%s: no '%s.Model' entry from %s", Name, section, cfg_source()); + return -1; + } - error("%s : Unsupported display. Currently supported are : GU311.",Name); - return -1; + DROWS = Models[Model].rows; + DCOLS = Models[Model].cols; + XRES = Models[Model].xres; + YRES = Models[Model].xres; + GOTO_COST = Models[Model].goto_cost; + Protocol = Models[Model].protocol; + /* display preferences */ + CHARS = 0; /* number of user-defineable characters */ + CHAR0 = 0; /* ASCII of first user-defineable char */ + + + + /* real worker functions */ + drv_Noritake_clear = drv_GU311_clear; + if ( Models[Model].type == 0x01 ) { + drv_generic_text_real_write = drv_GU311_write; + } else { + error("%s: Unsupported display. Currently supported are : GU311.",Name); + return -1; + } + return drv_GU311_start(section); } @@ -269,18 +325,10 @@ int drv_Noritake_init (const char *section, const int quiet) WIDGET_CLASS wc; int ret; - /* display preferences */ - XRES = 6; /* pixel width of one char */ - YRES = 8; /* pixel height of one char */ - CHARS = 0; /* number of user-defineable characters */ - CHAR0 = 0; /* ASCII of first user-defineable char */ - - GOTO_COST = 6; /* number of bytes a goto command requires */ - /* start display */ - if ((ret=drv_Noritake_start (section, quiet))!=0) + if ((ret=drv_Noritake_start (section))!=0) return ret; - + /* initialize generic text driver */ if ((ret=drv_generic_text_init(section, Name))!=0) return ret; |