diff options
Diffstat (limited to 'configure')
-rwxr-xr-x | configure | 5221 |
1 files changed, 344 insertions, 4877 deletions
@@ -242,165 +242,6 @@ IFS=" $as_nl" $as_unset CDPATH -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF - -EOF - exit 0 -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. @@ -469,7 +310,7 @@ ac_includes_default="\ # include <unistd.h> #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CXX CXXFLAGS ac_ct_CXX AWK build build_cpu build_vendor build_os host host_cpu host_vendor host_os LN_S ECHO RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CPP EGREP LIBTOOL CURSES_LIBS CURSES_INCLUDEDIR X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS DRIVERS DRVLIBS LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CXX CXXFLAGS ac_ct_CXX AWK RANLIB ac_ct_RANLIB CURSES_LIBS CURSES_INCLUDEDIR CPP EGREP X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS DRIVERS DRVLIBS LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1007,10 +848,6 @@ Program names: X features: --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi @@ -1020,19 +857,9 @@ if test -n "$ac_init_help"; then esac cat <<\_ACEOF -Optional Features: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-shared=PKGS build shared libraries default=yes - --enable-static=PKGS build static libraries default=yes - --enable-fast-install=PKGS optimize for fast installation default=yes - --disable-libtool-lock avoid locking (might break parallel builds) - Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld default=no - --with-pic try to use only PIC/non-PIC objects default=use both --with-sco Use this to turn on SCO-specific code --with-sunos-curses Used to force SunOS 4.x curses --with-osf1-curses Used to force OSF/1 curses @@ -3002,775 +2829,180 @@ done # Using `AC_PROG_RANLIB' is rendered # obsolete by `AC_PROG_LIBTOOL' :-( -#AC_PROG_RANLIB -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_shared=yes -fi; -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_static=yes -fi; -# Check whether --enable-fast-install or --disable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval="$enable_fast_install" - p=${PACKAGE-default} -case $enableval in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_fast_install=yes -fi; -# Make sure we can run config.sub. -$ac_config_sub sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 -echo "$as_me: error: cannot run $ac_config_sub" >&2;} - { (exit 1); exit 1; }; } - -echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6 -if test "${ac_cv_build+set}" = set; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_cv_build_alias=$build_alias -test -z "$ac_cv_build_alias" && - ac_cv_build_alias=`$ac_config_guess` -test -z "$ac_cv_build_alias" && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6 -build=$ac_cv_build -build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - -echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6 -if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else - ac_cv_host_alias=$host_alias -test -z "$ac_cv_host_alias" && - ac_cv_host_alias=$ac_cv_build_alias -ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} - { (exit 1); exit 1; }; } +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done fi -echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6 -host=$ac_cv_host -host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator fi - - -# Check whether --with-gnu-ld or --without-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi; -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by GCC" >&5 -echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 -else - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 -fi -if test "${lt_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6 +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi -test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 -if test "${lt_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 -with_gnu_ld=$lt_cv_prog_gnu_ld - -echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 -if test "${lt_cv_ld_reload_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_ld_reload_flag='-r' fi -echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 -reload_flag=$lt_cv_ld_reload_flag -test -n "$reload_flag" && reload_flag=" $reload_flag" - -echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 -echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 -if test "${lt_cv_path_NM+set}" = set; then +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/${ac_tool_prefix}nm - if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi -fi - -NM="$lt_cv_path_NM" -echo "$as_me:$LINENO: result: $NM" >&5 -echo "${ECHO_T}$NM" >&6 - -echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 -if test "${lt_cv_path_SED+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else - # Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_executable_p="test -f" as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext" - fi - done - done + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done - # Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. -: ${TMPDIR=/tmp} -{ - tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=$TMPDIR/sed$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 - { (exit 1); exit 1; } -} - _max=0 - _count=0 - # Add /usr/xpg4/bin/sed as it is typically found on Solaris - # along with /bin/sed that truncates output. - for _sed in $_sed_list /usr/xpg4/bin/sed; do - test ! -f ${_sed} && break - cat /dev/null > "$tmp/sed.in" - _count=0 - echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in" - # Check for GNU sed and select it if it is found. - if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then - lt_cv_path_SED=${_sed} - break - fi - while true; do - cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp" - mv "$tmp/sed.tmp" "$tmp/sed.in" - cp "$tmp/sed.in" "$tmp/sed.nl" - echo >>"$tmp/sed.nl" - ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break - cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break - # 40000 chars as input seems more than enough - test $_count -gt 10 && break - _count=`expr $_count + 1` - if test $_count -gt $_max; then - _max=$_count - lt_cv_path_SED=$_sed - fi - done - done - rm -rf "$tmp" - + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi - -if test "X$SED" != "X"; then - lt_cv_path_SED=$SED +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 else - SED=$lt_cv_path_SED + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -echo "$as_me:$LINENO: result: $SED" >&5 -echo "${ECHO_T}$SED" >&6 -echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + RANLIB=$ac_ct_RANLIB else - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6 + RANLIB="$ac_cv_prog_RANLIB" fi -echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 -echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 -if test "${lt_cv_deplibs_check_method+set}" = set; then +# Deactivating libtool for the moment until +# we find a way this beast works cleanly... +#AC_PROG_LIBTOOL +#AM_PROG_LIBTOOL + +# Checks for libraries. + + +echo "$as_me:$LINENO: checking for log in -lm" >&5 +echo $ECHO_N "checking for log in -lm... $ECHO_C" >&6 +if test "${ac_cv_lib_m_log+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[012]) - lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20*|hpux11*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux-gnu*) - case $host_cpu in - alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* | arm* | m68k) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv5uw[78]* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; -esac +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char log (); +int +main () +{ +log (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_m_log=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_lib_m_log=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method +echo "$as_me:$LINENO: result: $ac_cv_lib_m_log" >&5 +echo "${ECHO_T}$ac_cv_lib_m_log" >&6 +if test $ac_cv_lib_m_log = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + LIBS="-lm $LIBS" +fi + + +# curses -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo "$as_me:$LINENO: checking command to parse $NM output" >&5 -echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6 -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris* | sysv5*) - symcode='[BDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[ABCDGISTW]' -fi -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - # Write the raw and C identifiers. -lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - # Check to see that the pipe works correctly. - pipe_works=no - rm -f conftest* - cat > conftest.$ac_ext <<EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat <<EOF > conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif -EOF - # Now generate the symbol file. - eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' - cat <<EOF >> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr) 0} -}; -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest$ac_exeext; then - pipe_works=yes - fi - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -fi -global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" -if test -z "$lt_cv_sys_global_symbol_pipe"; then - global_symbol_to_cdecl= - global_symbol_to_c_name_address= -else - global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" - global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" -fi -if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; -then - echo "$as_me:$LINENO: result: failed" >&5 -echo "${ECHO_T}failed" >&6 -else - echo "$as_me:$LINENO: result: ok" >&5 -echo "${ECHO_T}ok" >&6 -fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -4022,3981 +3254,6 @@ echo "${ECHO_T}$ac_cv_prog_egrep" >&6 EGREP=$ac_cv_prog_egrep -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <stdlib.h> -#include <stdarg.h> -#include <string.h> -#include <float.h> - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_stdc=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <string.h> - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <stdlib.h> - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ctype.h> -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_Header=no" -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - -for ac_header in dlfcn.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - - - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <<EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <<EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - RANLIB=$ac_ct_RANLIB -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" -fi - - -enable_dlopen=no -enable_win32_dll=no - -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" - -fi; -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 4710 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 -if test "${lt_cv_cc_needs_belf+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - lt_cv_cc_needs_belf=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -lt_cv_cc_needs_belf=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - - -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -need_locks="$enable_libtool_lock" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -if test x"$host" != x"$build"; then - ac_tool_prefix=${host_alias}- -else - ac_tool_prefix= -fi - -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case $host_os in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - -echo "$as_me:$LINENO: checking for objdir" >&5 -echo $ECHO_N "checking for objdir... $ECHO_C" >&6 -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -echo "$as_me:$LINENO: result: $objdir" >&5 -echo "${ECHO_T}$objdir" >&6 - - - -# Check whether --with-pic or --without-pic was given. -if test "${with_pic+set}" = set; then - withval="$with_pic" - pic_mode="$withval" -else - pic_mode=default -fi; -test -z "$pic_mode" && pic_mode=default - -# We assume here that the value for lt_cv_prog_cc_pic will not be cached -# in isolation, and that seeing it set (from the cache) indicates that -# the associated values are set (in the cache) correctly too. -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 -if test "${lt_cv_prog_cc_pic+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_cc_pic= - lt_cv_prog_cc_shlib= - lt_cv_prog_cc_wl= - lt_cv_prog_cc_static= - lt_cv_prog_cc_no_builtin= - lt_cv_prog_cc_can_build_shared=$can_build_shared - - if test "$GCC" = yes; then - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-static' - - case $host_os in - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # not sure about C++ programs. - lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_cv_prog_cc_pic='-fno-common' - ;; - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_cv_prog_cc_pic=-Kconform_pic - fi - ;; - *) - lt_cv_prog_cc_pic='-fPIC' - ;; - esac - else - # PORTME Check for PIC flags for the system compiler. - case $host_os in - aix3* | aix4* | aix5*) - lt_cv_prog_cc_wl='-Wl,' - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_cv_prog_cc_static='-Bstatic' - else - lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - hpux9* | hpux10* | hpux11*) - # Is there a better lt_cv_prog_cc_static that works with the bundled CC? - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" - lt_cv_prog_cc_pic='+Z' - ;; - - irix5* | irix6* | nonstopux*) - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - # PIC (with -KPIC) is the default. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - - newsos6) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - ;; - - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - ;; - - sco3.2v5*) - lt_cv_prog_cc_pic='-Kpic' - lt_cv_prog_cc_static='-dn' - lt_cv_prog_cc_shlib='-belf' - ;; - - solaris*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; - - sunos4*) - lt_cv_prog_cc_pic='-PIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Qoption ld ' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; - - uts4*) - lt_cv_prog_cc_pic='-pic' - lt_cv_prog_cc_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_cv_prog_cc_pic='-Kconform_pic' - lt_cv_prog_cc_static='-Bstatic' - fi - ;; - - *) - lt_cv_prog_cc_can_build_shared=no - ;; - esac - fi - -fi - -if test -z "$lt_cv_prog_cc_pic"; then - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 -else - echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6 - - # Check to make sure the pic_flag actually works. - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6 - if test "${lt_cv_prog_cc_pic_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - case $host_os in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then - # they create non-PIC objects. So, if there were any warnings, we - # assume that PIC is not supported. - if test -s conftest.err; then - lt_cv_prog_cc_pic_works=no - else - lt_cv_prog_cc_pic_works=yes - fi - ;; - *) - lt_cv_prog_cc_pic_works=yes - ;; - esac - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - lt_cv_prog_cc_pic_works=no - -fi -rm -f conftest.$ac_objext conftest.$ac_ext - CFLAGS="$save_CFLAGS" - -fi - - - if test "X$lt_cv_prog_cc_pic_works" = Xno; then - lt_cv_prog_cc_pic= - lt_cv_prog_cc_can_build_shared=no - else - lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" - fi - - echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6 -fi - -# Check for any special shared library compilation flags. -if test -n "$lt_cv_prog_cc_shlib"; then - { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5 -echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;} - if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : - else - { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 -echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} - lt_cv_prog_cc_can_build_shared=no - fi -fi - -echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6 -if test "${lt_cv_prog_cc_static_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_cc_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - lt_cv_prog_cc_static_works=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - -fi - - -# Belt *and* braces to stop my trousers falling down: -test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= -echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6 - -pic_flag="$lt_cv_prog_cc_pic" -special_shlib_compile_flags="$lt_cv_prog_cc_shlib" -wl="$lt_cv_prog_cc_wl" -link_static_flag="$lt_cv_prog_cc_static" -no_builtin_flag="$lt_cv_prog_cc_no_builtin" -can_build_shared="$lt_cv_prog_cc_can_build_shared" - - -# Check to see if options -o and -c are simultaneously supported by compiler -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -echo "int some_variable = 0;" > conftest.$ac_ext -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" -compiler_c_o=no -if { (eval echo configure:5239: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - lt_cv_compiler_c_o=no - else - lt_cv_compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&5 - lt_cv_compiler_c_o=no -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null - -fi - -compiler_c_o=$lt_cv_compiler_c_o -echo "$as_me:$LINENO: result: $compiler_c_o" >&5 -echo "${ECHO_T}$compiler_c_o" >&6 - -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6 - if test "${lt_cv_compiler_o_lo+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - lt_cv_compiler_o_lo=no - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - save_objext="$ac_objext" - ac_objext=lo - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -int some_variable = 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - lt_cv_compiler_o_lo=no - else - lt_cv_compiler_o_lo=yes - fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext - ac_objext="$save_objext" - CFLAGS="$save_CFLAGS" - -fi - - compiler_o_lo=$lt_cv_compiler_o_lo - echo "$as_me:$LINENO: result: $compiler_o_lo" >&5 -echo "${ECHO_T}$compiler_o_lo" >&6 -else - compiler_o_lo=no -fi - -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - -if test "$GCC" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 - echo "int some_variable = 0;" > conftest.$ac_ext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - compiler_rtti_exceptions=no - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -int some_variable = 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - compiler_rtti_exceptions=no - else - compiler_rtti_exceptions=yes - fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext - CFLAGS="$save_CFLAGS" - echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$compiler_rtti_exceptions" >&6 - - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' - fi -fi - -# See if the linker supports building shared libraries. -echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6 - -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -old_archive_from_expsyms_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_into_libs=no -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -link_all_deplibs=unknown -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. -extract_expsyms_cmds= - -case $host_os in -cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; -openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX, the GNU linker is very broken - # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. - ld_shlibs=no - cat <<EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left be newer dlltools. - export_symbols_cmds="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \$# in - 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - 4) echo " \$2 \$3 \$4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;; - *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - hardcode_direct=yes - archive_cmds='' - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - esac - - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - shared_flag='${wl}-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall can do strange things, so it is better to - # generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='${wl}-berok' - # This is a bit strange, but is similar to how AIX traditionally builds - # it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag='-undefined suppress' - ;; - *) # Darwin 1.3 on - allow_undefined_flag='-flat_namespace -undefined suppress' - ;; - esac - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. Also zsh mangles - # `"' quotes if we put them in here... so don't! - archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)' - # We need to add '_' to the symbols in $export_symbols first - #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' - hardcode_direct=yes - hardcode_shlibpath_var=no - whole_archive_flag_spec='-all_load $convenience' - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9* | hpux10* | hpux11*) - case $host_os in - hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - #Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - export_dynamic_flag_spec='${wl}-Bexport' - ;; - - solaris*) - # gcc --version < 3.0 without binutils cannot create self contained - # shared libraries reliably, requiring libgcc.a to resolve some of - # the object symbols generated in some cases. Libraries that use - # assert need libgcc.a to resolve __eprintf, for example. Linking - # a copy of libgcc.a into every shared library to guarantee resolving - # such symbols causes other problems: According to Tim Van Holder - # <tim.van.holder@pandora.be>, C++ libraries end up with a separate - # (to the application) exception stack for one thing. - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - case `$CC --version 2>/dev/null` in - [12].*) - cat <<EOF 1>&2 - -*** Warning: Releases of GCC earlier than version 3.0 cannot reliably -*** create self contained shared libraries on Solaris systems, without -*** introducing a dependency on libgcc.a. Therefore, libtool is disabling -*** -no-undefined support, which will at least allow you to build shared -*** libraries. However, you may find that when you link such libraries -*** into an application without using GCC, you have to manually add -*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to -*** upgrade to a newer version of GCC. Another option is to rebuild your -*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. - -EOF - no_undefined_flag= - ;; - esac - fi - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5uw7* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac -fi -echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -echo "${ECHO_T}$ld_shlibs" >&6 -test "$ld_shlibs" = no && can_build_shared=no - -# Check hardcoding attributes. -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action" >&5 -echo "${ECHO_T}$hardcode_action" >&6 - -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -reload_cmds='$LD$reload_flag -o $output$reload_objs' -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -# PORTME Fill in your ld.so characteristics -echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can - # not hardcode correct soname into executable. Probably we can - # add versioning support to collect2, so additional links can - # be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib<name>.so - # instead of lib<name>.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - hardcode_into_libs=yes - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"` - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU/FreeBSD ld.so' - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - *) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) version_type=irix ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case "$host_os" in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_version=no - need_lib_prefix=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - hardcode_into_libs=yes - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 -test "$dynamic_linker" = no && can_build_shared=no - -# Report the final consequences. -echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6 - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != shl_load; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_shl_load=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != dlopen; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_svld_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); -int -main () -{ -dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_dld_link=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<EOF -#line 7084 "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<EOF -#line 7182 "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - if test "${lt_cv_archive_cmds_need_lc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - $rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_cv_prog_cc_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi -fi - - echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 -echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6 - ;; - esac -fi -need_lc=${lt_cv_archive_cmds_need_lc-yes} - -# The second clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - : -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - -if test -f "$ltmain"; then - trap "$rm \"${ofile}T\"; exit 1" 1 2 15 - $rm -f "${ofile}T" - - echo creating $ofile - - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS SED \ - AR AR_FLAGS CC LD LN_S NM SHELL \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ - postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ - old_striplib striplib file_magic_cmd export_symbols_cmds \ - deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - global_symbol_to_c_name_address \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do - - case $var in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - cat <<__EOF__ > "${ofile}T" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996-2000 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="${SED} -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$need_lc - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# The default C compiler. -CC=$lt_CC - -# Is the compiler the GNU C compiler? -with_gcc=$GCC - -# The linker used to build libraries. -LD=$lt_LD - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_wl - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_pic_flag -pic_mode=$pic_mode - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_compiler_c_o - -# Can we write directly to a .lo ? -compiler_o_lo=$lt_compiler_o_lo - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_link_static_flag - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# ### END LIBTOOL CONFIG - -__EOF__ - - case $host_os in - aix3*) - cat <<\EOF >> "${ofile}T" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - case $host_os in - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "${ofile}T" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include <windows.h> -# #undef WIN32_LEAN_AND_MEAN -# #include <stdio.h> -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include <cygwin/cygwin_dll.h> -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include <stdio.h> /* for printf() */ -# #include <unistd.h> /* for open(), lseek(), read() */ -# #include <fcntl.h> /* for O_RDONLY, O_BINARY */ -# #include <string.h> /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i<nexp; i++) -# { -# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4); -# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i); -# } -# -# return 0; -# } -# /* impgen.c ends here */ - -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1) - - mv -f "${ofile}T" "$ofile" || \ - (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") - chmod +x "$ofile" -fi - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - -# Prevent multiple expansion - - - - -# Checks for libraries. - -echo "$as_me:$LINENO: checking for log in -lm" >&5 -echo $ECHO_N "checking for log in -lm... $ECHO_C" >&6 -if test "${ac_cv_lib_m_log+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char log (); -int -main () -{ -log (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_m_log=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_m_log=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_m_log" >&5 -echo "${ECHO_T}$ac_cv_lib_m_log" >&6 -if test $ac_cv_lib_m_log = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBM 1 -_ACEOF - - LIBS="-lm $LIBS" - -fi - - -# curses - - - - - - - - - - - - - - - - - - - - - - search_ncurses=true screen_manager="" @@ -8425,7 +3682,7 @@ echo "${ECHO_T}Please note that some screen refreshs may fail" >&6 echo $ECHO_N "checking for ncurses version... $ECHO_C" >&6 ncurses_version=unknown cat > conftest.$ac_ext <<EOF -#line 8428 "configure" +#line 3685 "configure" #include "confdefs.h" #ifdef RENAMED_NCURSES #include <curses.h> @@ -9671,6 +4928,229 @@ fi # check for gd.h +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <string.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ctype.h> +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + for ac_header in gd/gd.h gd.h @@ -13366,25 +8846,12 @@ s,@CXX@,$CXX,;t t s,@CXXFLAGS@,$CXXFLAGS,;t t s,@ac_ct_CXX@,$ac_ct_CXX,;t t s,@AWK@,$AWK,;t t -s,@build@,$build,;t t -s,@build_cpu@,$build_cpu,;t t -s,@build_vendor@,$build_vendor,;t t -s,@build_os@,$build_os,;t t -s,@host@,$host,;t t -s,@host_cpu@,$host_cpu,;t t -s,@host_vendor@,$host_vendor,;t t -s,@host_os@,$host_os,;t t -s,@LN_S@,$LN_S,;t t -s,@ECHO@,$ECHO,;t t s,@RANLIB@,$RANLIB,;t t s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@CPP@,$CPP,;t t -s,@EGREP@,$EGREP,;t t -s,@LIBTOOL@,$LIBTOOL,;t t s,@CURSES_LIBS@,$CURSES_LIBS,;t t s,@CURSES_INCLUDEDIR@,$CURSES_INCLUDEDIR,;t t +s,@CPP@,$CPP,;t t +s,@EGREP@,$EGREP,;t t s,@X_CFLAGS@,$X_CFLAGS,;t t s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t s,@X_LIBS@,$X_LIBS,;t t |