diff options
Diffstat (limited to '')
| -rw-r--r-- | T6963.c | 464 |
1 files changed, 464 insertions, 0 deletions
@@ -0,0 +1,464 @@ +/* $Id: T6963.c,v 1.1 2002/04/29 11:00:26 reinelt Exp $ + * + * driver for display modules based on the Toshiba T6963 chip + * + * Copyright 1999, 2000 by Michael Reinelt (reinelt@eunet.at) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * $Log: T6963.c,v $ + * Revision 1.1 2002/04/29 11:00:26 reinelt + * + * added Toshiba T6963 driver + * added ndelay() with nanosecond resolution + * + * + */ + +/* + * + * exported fuctions: + * + * struct LCD T6963[] + * + */ + +#include "config.h" + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <unistd.h> +#include <fcntl.h> +#include <time.h> +#include <errno.h> +#include <sys/ioctl.h> + +#if defined (HAVE_LINUX_PARPORT_H) && defined (HAVE_LINUX_PPDEV_H) +#define WITH_PPDEV +#include <linux/parport.h> +#include <linux/ppdev.h> +#else +#error The T6963 driver needs ppdev +#error cannot compile T6963 driver +#endif + +#include "debug.h" +#include "cfg.h" +#include "display.h" +#include "udelay.h" +#include "pixmap.h" + + +/* + * /CE (Chip Enable) <==> /Strobe + * C/D (Command/Data) <==> /Select + * /RD (Read) <==> /AutoFeed + * /WR (Write) <==> Init + * + */ + +#define CE_L PARPORT_CONTROL_STROBE +#define CE_H 0 + +#define CD_L PARPORT_CONTROL_SELECT +#define CD_H 0 + +#define RD_L PARPORT_CONTROL_AUTOFD +#define RD_H 0 + +#define WR_L 0 +#define WR_H PARPORT_CONTROL_INIT + + +#define XRES 6 +#define YRES 8 +#define BARS ( BAR_L | BAR_R | BAR_U | BAR_D | BAR_H2 | BAR_V2 | BAR_T) + +static LCD Lcd; + +static char *PPdev=NULL; +static int PPfd=-1; + +unsigned char *Buffer1, *Buffer2; + +// perform normal status check +void T6_status1 (void) +{ + int direction; + int n; + unsigned char ctrl, data; + + // turn off data line drivers + direction=1; + ioctl (PPfd, PPDATADIR, &direction); + + // lower RD and CE + ctrl = RD_L | WR_H | CE_L | CD_H; + ioctl (PPfd, PPWCONTROL, &ctrl); + + ndelay(150); // Access Time: 150 ns + + // wait for STA0=1 and STA1=1 + n=0; + do { + rep_nop(); + if (++n>1000) { + debug("hang in status1"); + break; + } + ioctl (PPfd, PPRDATA, &data); + } while ((data & 0x03) != 0x03); + + // rise RD and CE + ctrl = RD_H | WR_H | CE_H | CD_H; + ioctl (PPfd, PPWCONTROL, &ctrl); + + // turn on data line drivers + direction=0; + ioctl (PPfd, PPDATADIR, &direction); + +} + +// perform status check in "auto mode" +void T6_status2 (void) +{ + int direction; + int n; + unsigned char ctrl, data; + + // turn off data line drivers + direction=1; + ioctl (PPfd, PPDATADIR, &direction); + + // lower RD and CE + ctrl = RD_L | WR_H | CE_L | CD_H; + ioctl (PPfd, PPWCONTROL, &ctrl); + + ndelay(150); // Access Time: 150 ns + + // wait for STA3=1 + n=0; + do { + rep_nop(); + if (++n>1000) { + debug("hang in status2"); + break; + } + ioctl (PPfd, PPRDATA, &data); + } while ((data & 0x08) == 0); + + // rise RD and CE + ctrl = RD_H | WR_H | CE_H | CD_H; + ioctl (PPfd, PPWCONTROL, &ctrl); + + // turn on data line drivers + direction=0; + ioctl (PPfd, PPDATADIR, &direction); +} + + +static void T6_write_cmd (unsigned char cmd) +{ + unsigned char ctrl; + + // wait until the T6963 is idle + T6_status1(); + + // put data on DB1..DB8 + ioctl(PPfd, PPWDATA, &cmd); + + // lower WR and CE + ctrl = RD_H | WR_L | CE_L | CD_H; + ioctl (PPfd, PPWCONTROL, &ctrl); + + ndelay(80); // Pulse width + + // rise WR and CE + ctrl = RD_H | WR_H | CE_H | CD_H; + ioctl (PPfd, PPWCONTROL, &ctrl); +} + +static void T6_write_data (unsigned char data) +{ + unsigned char ctrl; + + // wait until the T6963 is idle + T6_status1(); + + // put data on DB1..DB8 + ioctl(PPfd, PPWDATA, &data); + + // lower C/D + ctrl = RD_H | WR_H | CE_H | CD_L; + ioctl (PPfd, PPWCONTROL, &ctrl); + + ndelay(20); // C/D Setup Time + + // lower WR and CE + ctrl = RD_H | WR_L | CE_L | CD_L; + ioctl (PPfd, PPWCONTROL, &ctrl); + + ndelay(80); // Pulse Width + + // rise WR and CE + ctrl = RD_H | WR_H | CE_H | CD_L; + ioctl (PPfd, PPWCONTROL, &ctrl); + + ndelay(10); // C/D Hold Time + + // rise CD + ctrl = RD_H | WR_H | CE_H | CD_H; + ioctl (PPfd, PPWCONTROL, &ctrl); + +} + +static void T6_write_auto (unsigned char data) +{ + unsigned char ctrl; + + // wait until the T6963 is idle + T6_status2(); + + // put data on DB1..DB8 + ioctl(PPfd, PPWDATA, &data); + + // lower C/D + ctrl = RD_H | WR_H | CE_H | CD_L; + ioctl (PPfd, PPWCONTROL, &ctrl); + + ndelay(20); // C/D Setup Time + + // lower WR and CE + ctrl = RD_H | WR_L | CE_L | CD_L; + ioctl (PPfd, PPWCONTROL, &ctrl); + + ndelay(80); // Pulse Width + + // rise WR and CE + ctrl = RD_H | WR_H | CE_H | CD_L; + ioctl (PPfd, PPWCONTROL, &ctrl); + + ndelay(10); // C/D Hold Time + + // rise CD + ctrl = RD_H | WR_H | CE_H | CD_H; + ioctl (PPfd, PPWCONTROL, &ctrl); + +} + +static void T6_send_byte (unsigned char cmd, unsigned char data) +{ + T6_write_data(data); + T6_write_cmd(cmd); +} + +static void T6_send_word (unsigned char cmd, unsigned short data) +{ + T6_write_data(data&0xff); + T6_write_data(data>>8); + T6_write_cmd(cmd); +} + +static void T6_memset(unsigned short addr, unsigned char data, int len) +{ + int i; + + T6_send_word (0x24, addr); // Set Adress Pointer + T6_write_cmd(0xb0); // Set Data Auto Write + for (i=0; i<len; i++) { + T6_write_auto(data); + } + T6_status2(); + T6_write_cmd(0xb2); // Auto Reset +} + + +static void T6_memcpy(unsigned short addr, unsigned char *data, int len) +{ + int i; + + T6_send_word (0x24, 0x0200+addr); // Set Adress Pointer + T6_write_cmd(0xb0); // Set Data Auto Write + for (i=0; i<len; i++) { + T6_write_auto(*(data++)); + } + T6_status2(); + T6_write_cmd(0xb2); // Auto Reset +} + + +static int T6_open (void) +{ + debug ("using ppdev %s", PPdev); + PPfd=open(PPdev, O_RDWR); + if (PPfd==-1) { + error ("open(%s) failed: %s", PPdev, strerror(errno)); + return -1; + } + +#if 0 + if (ioctl(PPfd, PPEXCL)) { + debug ("ioctl(%s, PPEXCL) failed: %s", PPdev, strerror(errno)); + } else { + debug ("ioctl(%s, PPEXCL) succeded."); + } +#endif + + if (ioctl(PPfd, PPCLAIM)) { + error ("ioctl(%s, PPCLAIM) failed: %d %s", PPdev, errno, strerror(errno)); + return -1; + } + + return 0; +} + +int T6_clear (void) +{ + int rows; + + rows=(Lcd.rows>8 ? 8 : Lcd.rows); + + T6_memset(0x0000, 0, Lcd.cols*rows); // clear text area + T6_memset(0x0200, 0, Lcd.cols*rows*8); // clear graphic area + + if (Lcd.rows>8) { + T6_memset(0x8000, 0, Lcd.cols*(Lcd.rows-rows)); // clear text area #2 + T6_memset(0x8200, 0, Lcd.cols*(Lcd.rows-rows)*8); // clear graphic area #2 + } + + memset(Buffer1,0,Lcd.cols*Lcd.rows*Lcd.yres*sizeof(*Buffer1)); + memset(Buffer2,0,Lcd.cols*Lcd.rows*Lcd.yres*sizeof(*Buffer2)); + + return pix_clear(); +} + +int T6_init (LCD *Self) +{ + char *port; + + Lcd=*Self; + + if (PPdev) { + free (PPdev); + PPdev=NULL; + } + + port=cfg_get ("Port"); + if (port==NULL || *port=='\0') { + error ("T6963: no 'Port' entry in %s", cfg_file()); + return -1; + } + PPdev=strdup(port); + + if (pix_init (Lcd.rows, Lcd.cols, Lcd.xres, Lcd.yres)!=0) { + error ("T6963: pix_init(%d, %d, %d, %d) failed", Lcd.rows, Lcd.cols, Lcd.xres, Lcd.yres); + return -1; + } + + Buffer1=malloc(Lcd.cols*Lcd.rows*Lcd.yres); + if (Buffer1==NULL) { + error ("T6963: malloc(%d) failed: %s", Lcd.cols*Lcd.rows*Lcd.yres, strerror(errno)); + return -1; + } + + Buffer2=malloc(Lcd.cols*Lcd.rows*Lcd.yres); + if (Buffer2==NULL) { + error ("T6963: malloc(%d) failed: %s", Lcd.cols*Lcd.rows*Lcd.yres, strerror(errno)); + return -1; + } + + udelay_init(); + + if (T6_open()!=0) + return -1; + + debug ("setting %d columns", Lcd.cols); + + T6_send_word (0x40, 0x0000); // Set Text Home Address + T6_send_word (0x41, 40); // Set Text Area + + T6_send_word (0x42, 0x0200); // Set Graphic Home Address + T6_send_word (0x43, 40); // Set Graphic Area + + T6_write_cmd (0x80); // Mode Set: OR mode, Internal CG RAM mode + T6_send_word (0x22, 0x0002); // Set Offset Register + T6_write_cmd (0x98); // Set Display Mode: Curser off, Text off, Graphics on + T6_write_cmd (0xa0); // Set Cursor Pattern: 1 line cursor + T6_send_word (0x21, 0x0000); // Set Cursor Pointer to (0,0) + + T6_clear(); + + return 0; +} + +int T6_put (int row, int col, char *text) +{ + return pix_put(row,col,text); +} + +int T6_bar (int type, int row, int col, int max, int len1, int len2) +{ + return pix_bar(type,row,col,max,len1,len2); +} + +int T6_flush (void) +{ + int i, j, e; + + memset(Buffer1,0,Lcd.cols*Lcd.rows*Lcd.yres*sizeof(*Buffer1)); + + for (i=0; i<Lcd.cols*Lcd.rows*Lcd.yres; i++) { + for (j=0; j<Lcd.xres; j++) { + Buffer1[i]<<=1; + if (LCDpixmap[i*Lcd.xres+j]) Buffer1[i]|=1; + } + } + + for (i=0; i<Lcd.cols*Lcd.rows*Lcd.yres; i++) { + if (Buffer1[i]==Buffer2[i]) continue; + for (j=i, e=0; i<Lcd.cols*Lcd.rows*Lcd.yres; i++) { + if (Buffer1[i]==Buffer2[i]) { + if (++e>4) break; + } else { + e=0; + } + } + T6_memcpy (j, Buffer1+j, i-j-e+1); + } + + memcpy(Buffer2,Buffer1,Lcd.cols*Lcd.rows*Lcd.yres*sizeof(*Buffer1)); + + return 0; +} + +int T6_quit (void) +{ + debug ("closing ppdev %s", PPdev); + if (ioctl(PPfd, PPRELEASE)) { + error ("ioctl(%s, PPRELEASE) failed: %s", PPdev, strerror(errno)); + } + if (close(PPfd)==-1) { + error ("close(%s) failed: %s", PPdev, strerror(errno)); + return -1; + } + return 0; +} + +LCD T6963[] = { + { "TLC1091",16,40,XRES,YRES,BARS,0,T6_init,T6_clear,T6_put,T6_bar,NULL,T6_flush,T6_quit }, + { NULL } +}; |