diff options
Diffstat (limited to '')
| -rw-r--r-- | README | 97 |
1 files changed, 50 insertions, 47 deletions
@@ -1,5 +1,5 @@ # -# $Id: README,v 1.20 2001/03/16 16:40:17 ltoetsch Exp $ +# $Id: README,v 1.21 2001/05/27 17:32:35 reinelt Exp $ # This is the README file for lcd4linux @@ -138,7 +138,6 @@ Data-specific options: displays a '!' instead of a blank if the current load average exceeds this value. load bars are scaled by this value (load=overload gives 100%) - fifo: path to fifo for communication with isdnlog (not yet implemented) sensor1: path to the 1st temperature file (e.g. /proc/sys/dev/sensors/w83781d-isa-0290/temp1) it is important that you use the isa sensors, because the i2c @@ -179,6 +178,8 @@ Data-specific options: Note: user and pass may not contain a '/' with above syntax, I hope that's ok. + SetiDir: directory where seti@home stores its data files + Driver-specific options: @@ -215,51 +216,53 @@ Display options: Tokens: - 'o', operating system name ('Linux') - 'v', operating system release ('2.0.38') - 'p', processor ('i686') - 'r', total amount of memory installed (MB) - 'mt', total memory from /proc/meminfo (kB) - 'mu', used memory (kB) - 'mf', free memory (kB) - 'ms', shared memory (kB) - 'mb', buffers (kB) - 'mc', page cache (kB) - 'ma', application memory (kB) = used - buffer - cache - 'l1', load average for the past 1 minute - 'l2', load average for the past 5 minutes - 'l3', load average for the past 15 minutes - 'L', '!' if load > overload (from config) - 'cu', percentage of CPU in user mode - 'cn', percentage of CPU in niced tasks - 'cs', percentage of CPU in system mode - 'cb', percentage of CPU busy (=100-idle) - 'ci', percentage of CPU idle - 'dr', disk blocks read - 'dw', disk blocks written - 'dt', disk blocks total (read+write) - 'dm', disk blocks max (read, write) - 'nr', network bytes received - 'nw', network bytes transmitted - 'nt', network bytes total (receive+transmit) - 'nm', network bytes max (receive, transmit) - 'ii', ISDN bytes received - 'io', ISDN bytes sent - 'it', ISDN bytes total (received+send) - 'im', ISDN bytes max (received, send) - 'ic', ISDN connected (0=offline, 1=online) - 'ti', PPP bytes received - 'to', PPP bytes sent - 'tt', PPP bytes total (received+send) - 'tm', PPP bytes max (received, send) - 's1', temperature of sensor 1 - 's2', temperature of sensor 2 (up to s9) - 'bp', battery percentage (APM by now) - 'bs', battery status ('=' = online, '+' = charging, '-' discharging) - 'bd', battery duration in s{econds}, m{ins}, h{ours} or d{ays} - 'e*', mails in mailbox 1-9, total mail - 'u*', mails in mailbox 1-9, unseen mail - 'x*', output of command 1-9 + 'o' operating system name ('Linux') + 'v' operating system release ('2.0.38') + 'p' processor ('i686') + 'r' total amount of memory installed (MB) + 'mt' total memory from /proc/meminfo (kB) + 'mu' used memory (kB) + 'mf' free memory (kB) + 'ms' shared memory (kB) + 'mb' buffers (kB) + 'mc' page cache (kB) + 'ma' application memory (kB) = used - buffer - cache + 'l1' load average for the past 1 minute + 'l2' load average for the past 5 minutes + 'l3' load average for the past 15 minutes + 'L' '!' if load > overload (from config) + 'cu' percentage of CPU in user mode + 'cn' percentage of CPU in niced tasks + 'cs' percentage of CPU in system mode + 'cb' percentage of CPU busy (=100-idle) + 'ci' percentage of CPU idle + 'dr' disk blocks read + 'dw' disk blocks written + 'dt' disk blocks total (read+write) + 'dm' disk blocks max (read, write) + 'nr' network bytes received + 'nw' network bytes transmitted + 'nt' network bytes total (receive+transmit) + 'nm' network bytes max (receive, transmit) + 'ii' ISDN bytes received + 'io' ISDN bytes sent + 'it' ISDN bytes total (received+send) + 'im' ISDN bytes max (received, send) + 'ic' ISDN connected (0=offline, 1=online) + 'ti' PPP bytes received + 'to' PPP bytes sent + 'tt' PPP bytes total (received+send) + 'tm' PPP bytes max (received, send) + 's1' temperature of sensor 1 + 's2' temperature of sensor 2 (up to s9) + 'bp' battery percentage (APM by now) + 'bs' battery status ('=' = online, '+' = charging, '-' discharging) + 'bd' battery duration in s{econds}, m{ins}, h{ours} or d{ays} + 'hc' seti@home % completed + 'ht' seti@home time spent on workunit + 'e*' mails in mailbox 1-9, total mail + 'u*' mails in mailbox 1-9, unseen mail + 'x*' output of command 1-9 Please have a look at lcd4linux.conf.sample, where you can find examples of all options and there usage. |