diff options
Diffstat (limited to '')
| -rw-r--r-- | CREDITS | 6 | ||||
| -rw-r--r-- | HD44780.c | 87 | ||||
| -rw-r--r-- | TODO | 7 |
3 files changed, 59 insertions, 41 deletions
@@ -3,6 +3,12 @@ Herbert Rosmanith <herp@wildsau.idv-edu.uni-linz.ac.at> CrystalFontz driver lots of ideas and bugfixes +Leopold Tötsch <lt@toetsch.at> + PNG driver + POP & IMAP client + simple web interface + lots of (well, sometimes too much :-) ideas + Michael Mueller <m.mueller@netsystec.de> support for Beckmann & Egle driver @@ -1,4 +1,4 @@ -/* $Id: HD44780.c,v 1.16 2001/03/14 15:30:53 reinelt Exp $ +/* $Id: HD44780.c,v 1.17 2001/03/14 16:47:41 reinelt Exp $ * * driver for display modules based on the HD44780 chip * @@ -20,6 +20,9 @@ * * * $Log: HD44780.c,v $ + * Revision 1.17 2001/03/14 16:47:41 reinelt + * minor cleanups + * * Revision 1.16 2001/03/14 15:30:53 reinelt * * make ppdev compatible to earlier kernels @@ -219,19 +222,18 @@ static void HD_command (unsigned char cmd, int delay) // wait udelay(delay); - } else { + } else #endif - outb (cmd, Port); // put data on DB1..DB8 - outb (0x02, Port+2); // set Enable = bit 0 invertet - udelay (1); - outb (0x03, Port+2); // clear Enable - udelay (delay); + { + outb (cmd, Port); // put data on DB1..DB8 + outb (0x02, Port+2); // set Enable = bit 0 invertet + udelay (1); + outb (0x03, Port+2); // clear Enable + udelay (delay); -#ifdef WITH_PPDEV - } -#endif + } } static void HD_write (char *string, int len, int delay) @@ -259,26 +261,27 @@ static void HD_write (char *string, int len, int delay) udelay(delay); } - } else { + } else #endif - while (len--) { - outb (*string++, Port); // put data on DB1..DB8 - outb (0x00, Port+2); // set Enable = bit 0 invertet - udelay (1); - outb (0x01, Port+2); // clear Enable - udelay (delay); + { + while (len--) { + outb (*string++, Port); // put data on DB1..DB8 + outb (0x00, Port+2); // set Enable = bit 0 invertet + udelay (1); + outb (0x01, Port+2); // clear Enable + udelay (delay); + } } -#ifdef WITH_PPDEV - } -#endif } + static void HD_setGPO (int bits) { if (Lcd.gpos>0) { #ifdef WITH_PPDEV + if (PPdev) { // put data on DB1..DB8 @@ -287,25 +290,24 @@ static void HD_setGPO (int bits) // toggle INIT HD_toggle(PARPORT_CONTROL_INIT); - } else { -#endif - - outb (bits, Port); // put data on DB1..DB8 - outb (0x05, Port+2); // set INIT = bit 2 invertet - udelay (1); - outb (0x03, Port+2); // clear INIT - udelay (1); - -#ifdef WITH_PPDEV - } + } else + #endif + + { + outb (bits, Port); // put data on DB1..DB8 + outb (0x05, Port+2); // set INIT = bit 2 invertet + udelay (1); + outb (0x03, Port+2); // clear INIT + udelay (1); + } } } static int HD_open (void) { - #ifdef WITH_PPDEV + if (PPdev) { debug ("using ppdev %s", PPdev); PPfd=open(PPdev, O_RDWR); @@ -313,7 +315,9 @@ static int HD_open (void) error ("open(%s) failed: %s", PPdev, strerror(errno)); return -1; } + #if 0 + // FIXME: This doesn't work for some reason... if (ioctl(PPfd, PPEXCL)) { error ("ioctl(%s, PPEXCL) failed: %s", PPdev, strerror(errno)); return -1; @@ -323,17 +327,18 @@ static int HD_open (void) error ("ioctl(%s, PPCLAIM) failed: %s", PPdev, strerror(errno)); return -1; } - } else { -#endif - debug ("using raw port 0x%x", Port); - if (ioperm(Port, 3, 1)!=0) { - error ("HD44780: ioperm(0x%x) failed: %s", Port, strerror(errno)); - return -1; - } -#ifdef WITH_PPDEV - } + } else + #endif + { + debug ("using raw port 0x%x", Port); + if (ioperm(Port, 3, 1)!=0) { + error ("HD44780: ioperm(0x%x) failed: %s", Port, strerror(errno)); + return -1; + } + } + HD_command (0x30, 4100); // 8 Bit mode, wait 4.1 ms HD_command (0x30, 100); // 8 Bit mode, wait 100 us HD_command (0x30, 4100); // 8 Bit mode, wait 4.1 ms @@ -70,3 +70,10 @@ remove USE_OLD_UDELAY after wide testing of new udelay code 2001-03-14 Leopold Toetsch <lt@toetsch.at> improve unseen for mbox (check Status:) + +2001-03-14 Michael Reinelt <reinelt@eunet.at> +add a new Token 'nc' for 'network collisions' + +2001-03-14 Michael Reinelt <reinelt@eunet.at> +add translation tables ('german umlauts' don't +follow any scheme on most displays) |