aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drv_HD44780.c79
-rw-r--r--drv_generic_parport.c34
2 files changed, 89 insertions, 24 deletions
diff --git a/drv_HD44780.c b/drv_HD44780.c
index 5b8a4ad..9550f8d 100644
--- a/drv_HD44780.c
+++ b/drv_HD44780.c
@@ -111,6 +111,7 @@ static unsigned char SIGNAL_ENABLE3;
static unsigned char SIGNAL_ENABLE4;
static unsigned char SIGNAL_GPO;
+static unsigned char SIGNAL_GPI;
#ifdef WITH_PARPORT
static unsigned char SIGNAL_BACKLIGHT;
static unsigned char SIGNAL_POWER;
@@ -127,7 +128,10 @@ static unsigned char SIGNAL_POWER;
static int UseBusy = 0;
#endif
-/* buffer holding the GPO state */
+/* which data bits should have their logic inverted */
+static int invert_data_bits = 0;
+
+/* buffer holding the GPIO state */
#ifdef WITH_PARPORT
static unsigned char GPO = 0;
#endif
@@ -146,13 +150,14 @@ typedef struct {
#define CAP_BUSY4BIT (1<<5)
#define CAP_HD66712 (1<<6)
#define CAP_LCM162 (1<<7)
+#define CAP_GPI (1<<8)
#define BUS_PP CAP_PARPORT
#define BUS_I2C CAP_I2C
static MODEL Models[] = {
- {0x01, "generic", CAP_PARPORT | CAP_I2C | CAP_GPO | CAP_BACKLIGHT},
+ {0x01, "generic", CAP_PARPORT | CAP_I2C | CAP_GPO | CAP_GPI | CAP_BACKLIGHT},
{0x02, "Noritake", CAP_PARPORT | CAP_I2C | CAP_GPO | CAP_BRIGHTNESS},
{0x03, "Soekris", CAP_PARPORT | CAP_BUSY4BIT},
{0x04, "HD66712", CAP_PARPORT | CAP_I2C | CAP_GPO | CAP_BACKLIGHT | CAP_HD66712},
@@ -221,7 +226,7 @@ static void drv_HD_PP_busy(const int controller)
/* Set RW, clear RS */
drv_generic_parport_control(SIGNAL_RW | SIGNAL_RS, SIGNAL_RW);
} else {
- drv_generic_parport_data(SIGNAL_RW);
+ drv_generic_parport_data(SIGNAL_RW ^ invert_data_bits);
}
/* Address set-up time */
@@ -231,7 +236,7 @@ static void drv_HD_PP_busy(const int controller)
if (Bits == 8) {
drv_generic_parport_control(enable, enable);
} else {
- drv_generic_parport_data(SIGNAL_RW | enable);
+ drv_generic_parport_data((SIGNAL_RW | enable) ^ invert_data_bits);
}
counter = 0;
@@ -287,9 +292,9 @@ static void drv_HD_PP_busy(const int controller)
drv_generic_parport_control(SIGNAL_RW | SIGNAL_RS, 0);
} else {
/* Lower EN */
- drv_generic_parport_data(SIGNAL_RW);
+ drv_generic_parport_data(SIGNAL_RW ^ invert_data_bits);
ndelay(T_AH);
- drv_generic_parport_data(0);
+ drv_generic_parport_data(0 ^ invert_data_bits);
}
/* set data-lines to output */
@@ -320,19 +325,19 @@ static void drv_HD_PP_nibble(const unsigned char controller, const unsigned char
/* clear ENABLE */
/* put data on DB1..DB4 */
/* nibble already contains RS bit! */
- drv_generic_parport_data(nibble);
+ drv_generic_parport_data(nibble ^ invert_data_bits);
/* Address set-up time */
ndelay(T_AS);
/* rise ENABLE */
- drv_generic_parport_data(nibble | enable);
+ drv_generic_parport_data((nibble | enable) ^ invert_data_bits);
/* Enable pulse width */
ndelay(T_PW);
/* lower ENABLE */
- drv_generic_parport_data(nibble);
+ drv_generic_parport_data(nibble ^ invert_data_bits);
}
@@ -372,7 +377,7 @@ static void drv_HD_PP_command(const unsigned char controller, const unsigned cha
enable |= SIGNAL_ENABLE4;
/* put data on DB1..DB8 */
- drv_generic_parport_data(cmd);
+ drv_generic_parport_data(cmd ^ invert_data_bits);
/* clear RW and RS */
drv_generic_parport_control(SIGNAL_RW | SIGNAL_RS, 0);
@@ -438,7 +443,7 @@ static void drv_HD_PP_data(const unsigned char controller, const char *string, c
}
/* put data on DB1..DB8 */
- drv_generic_parport_data(*(string++));
+ drv_generic_parport_data((*(string++)) ^ invert_data_bits);
/* send command */
drv_generic_parport_toggle(enable, 1, T_PW);
@@ -541,6 +546,8 @@ static int drv_HD_PP_load(const char *section)
return -1;
if ((SIGNAL_GPO = drv_generic_parport_wire_ctrl("GPO", "GND")) == 0xff)
return -1;
+ if ((SIGNAL_GPI = drv_generic_parport_wire_ctrl("GPI", "GND")) == 0xff)
+ return -1;
if ((SIGNAL_POWER = drv_generic_parport_wire_ctrl("POWER", "GND")) == 0xff)
return -1;
}
@@ -552,6 +559,9 @@ static int drv_HD_PP_load(const char *section)
if (SIGNAL_GPO == 0) {
Capabilities &= ~CAP_GPO;
}
+ if (SIGNAL_GPI == 0) {
+ Capabilities &= ~CAP_GPI;
+ }
/* Timings */
@@ -601,7 +611,7 @@ static int drv_HD_PP_load(const char *section)
SIGNAL_BACKLIGHT | SIGNAL_GPO | SIGNAL_POWER, 0);
} else {
drv_generic_parport_control(SIGNAL_BACKLIGHT | SIGNAL_GPO | SIGNAL_POWER, 0);
- drv_generic_parport_data(0);
+ drv_generic_parport_data(0 ^ invert_data_bits);
}
/* set direction: write */
@@ -667,7 +677,7 @@ static void drv_HD_PP_stop(void)
SIGNAL_RW | SIGNAL_ENABLE | SIGNAL_ENABLE2 | SIGNAL_ENABLE3 | SIGNAL_ENABLE4 |
SIGNAL_BACKLIGHT | SIGNAL_GPO, 0);
} else {
- drv_generic_parport_data(0);
+ drv_generic_parport_data(0 ^ invert_data_bits);
drv_generic_parport_control(SIGNAL_BACKLIGHT | SIGNAL_GPO | SIGNAL_POWER, 0);
}
@@ -965,7 +975,7 @@ static int drv_HD_GPO(const int num, const int val)
}
/* put data on DB1..DB8 */
- drv_generic_parport_data(GPO);
+ drv_generic_parport_data(GPO ^ invert_data_bits);
/* 74HCT573 set-up time */
ndelay(T_GPO_ST);
@@ -977,6 +987,27 @@ static int drv_HD_GPO(const int num, const int val)
return v;
}
+static int drv_HD_GPI(const int num)
+{
+ int v;
+
+ /* switch to read mode */
+ drv_generic_parport_direction(1);
+ drv_generic_parport_control(SIGNAL_GPI, SIGNAL_GPI);
+
+ /* 74HCT573 set-up time + enable pulse width */
+ ndelay(T_GPO_ST + T_GPO_PW);
+
+ /* read data from DB1..DB8 */
+ v = drv_generic_parport_read() ^ invert_data_bits;
+
+ /* switch back to write mode */
+ drv_generic_parport_control(SIGNAL_GPI, 0);
+ drv_generic_parport_direction(0);
+
+ return (v >> num) & 1;
+}
+
#endif
@@ -1042,7 +1073,7 @@ static void drv_HD_LCM162_timer(void __attribute__ ((unused)) * notused)
static int drv_HD_start(const char *section, const int quiet)
{
char *model, *size, *bus;
- int rows = -1, cols = -1, gpos = -1, i;
+ int rows = -1, cols = -1, gpos = -1, gpis = -1, i;
int size_defined = 0;
int size_missing = 0;
@@ -1199,6 +1230,23 @@ static int drv_HD_start(const char *section, const int quiet)
info("%s: using %d GPO's", Name, GPOS);
}
+ if (cfg_number(section, "GPIs", 0, 0, 8, &gpis) < 0)
+ return -1;
+ if (gpis > 0 && !(Capabilities & CAP_GPI)) {
+ error("%s: Model '%s' does not support GPI's!", Name, Models[Model].name);
+ gpis = 0;
+ }
+ GPIS = gpis;
+ if (GPIS > 0) {
+ info("%s: using %d GPI's", Name, GPIS);
+ }
+
+ if (cfg_number(section, "InvertDataBits", 0, 0, 256, &invert_data_bits) < 0)
+ return -1;
+ if (invert_data_bits) {
+ info("%s: inverting data bits (mask %02X)", Name, invert_data_bits);
+ }
+
if (drv_HD_load(section) < 0) {
error("%s: start display failed!", Name);
return -1;
@@ -1331,6 +1379,7 @@ int drv_HD_init(const char *section, const int quiet)
drv_generic_text_real_defchar = drv_HD_defchar;
#ifdef WITH_PARPORT
drv_generic_gpio_real_set = drv_HD_GPO;
+ drv_generic_gpio_real_get = drv_HD_GPI;
#endif
/* start display */
diff --git a/drv_generic_parport.c b/drv_generic_parport.c
index e501ef0..457a6bd 100644
--- a/drv_generic_parport.c
+++ b/drv_generic_parport.c
@@ -65,6 +65,9 @@
#define PARPORT_STATUS_BUSY 0x80
#endif
+/* these signals are inverted by hardware on the parallel port */
+#define PARPORT_CONTROL_INVERTED (PARPORT_CONTROL_STROBE | PARPORT_CONTROL_SELECT | PARPORT_CONTROL_AUTOFD)
+
#if !defined(WITH_OUTB) && !defined(WITH_PPDEV)
#error neither outb() nor ppdev() possible
#error cannot compile parallel port driver
@@ -82,6 +85,9 @@ static char *Section = "";
static unsigned short Port = 0;
static char *PPdev = NULL;
+/* Any bits set here will have their logic inverted at the parallel port */
+static unsigned char inverted_control_bits = 0;
+
/* initial value taken from linux/parport_pc.c */
static unsigned char ctr = 0xc;
@@ -205,23 +211,30 @@ int drv_generic_parport_close(void)
static unsigned char drv_generic_parport_signal_ctrl(const char *name, const char *signal)
{
unsigned char wire;
+ int invert = 0;
+
+ /* Prefixing a signal name with '-' inverts the logic */
+ if (signal[0] == '-') {
+ invert = 1;
+ signal++;
+ }
if (strcasecmp(signal, "STROBE") == 0) {
wire = PARPORT_CONTROL_STROBE;
- info("%s: wiring: DISPLAY:%-9s - PARPORT:STROBE (Pin 1)", Driver, name);
+ info("%s: wiring: DISPLAY:%-9s - PARPORT:STROBE (Pin 1)%s", Driver, name, invert ? " [inverted]" : "");
} else if (strcasecmp(signal, "AUTOFD") == 0) {
wire = PARPORT_CONTROL_AUTOFD;
- info("%s: wiring: DISPLAY:%-9s - PARPORT:AUTOFD (Pin 14)", Driver, name);
+ info("%s: wiring: DISPLAY:%-9s - PARPORT:AUTOFD (Pin 14)%s", Driver, name, invert ? " [inverted]" : "");
} else if (strcasecmp(signal, "INIT") == 0) {
wire = PARPORT_CONTROL_INIT;
- info("%s: wiring: DISPLAY:%-9s - PARPORT:INIT (Pin 16)", Driver, name);
+ info("%s: wiring: DISPLAY:%-9s - PARPORT:INIT (Pin 16)%s", Driver, name, invert ? " [inverted]" : "");
} else if (strcasecmp(signal, "SLCTIN") == 0) {
wire = PARPORT_CONTROL_SELECT;
- info("%s: wiring: DISPLAY:%-9s - PARPORT:SLCTIN (Pin 17)", Driver, name);
+ info("%s: wiring: DISPLAY:%-9s - PARPORT:SLCTIN (Pin 17)%s", Driver, name, invert ? " [inverted]" : "");
} else if (strcasecmp(signal, "SELECT") == 0) {
wire = PARPORT_CONTROL_SELECT;
error("%s: SELECT is deprecated. Please use SLCTIN instead!", Driver);
- info("%s: wiring: DISPLAY:%-9s - PARPORT:SLCTIN (Pin 17)", Driver, name);
+ info("%s: wiring: DISPLAY:%-9s - PARPORT:SLCTIN (Pin 17)%s", Driver, name, invert ? " [inverted]" : "");
} else if (strcasecmp(signal, "GND") == 0) {
wire = 0;
info("%s: wiring: DISPLAY:%-9s - PARPORT:GND", Driver, name);
@@ -231,6 +244,10 @@ static unsigned char drv_generic_parport_signal_ctrl(const char *name, const cha
return 0xff;
}
+ if (invert) {
+ inverted_control_bits |= wire;
+ }
+
return wire;
}
@@ -401,7 +418,7 @@ void drv_generic_parport_control(const unsigned char mask, const unsigned char v
return;
/* Strobe, Select and AutoFeed are inverted! */
- val = mask & (value ^ (PARPORT_CONTROL_STROBE | PARPORT_CONTROL_SELECT | PARPORT_CONTROL_AUTOFD));
+ val = mask & (value ^ PARPORT_CONTROL_INVERTED ^ inverted_control_bits);
#ifdef WITH_PPDEV
if (PPdev) {
@@ -433,9 +450,8 @@ void drv_generic_parport_toggle(const unsigned char bits, const int level, const
value2 = level ? 0 : bits;
/* Strobe, Select and AutoFeed are inverted! */
- value1 = bits & (value1 ^ (PARPORT_CONTROL_STROBE | PARPORT_CONTROL_SELECT | PARPORT_CONTROL_AUTOFD));
- value2 = bits & (value2 ^ (PARPORT_CONTROL_STROBE | PARPORT_CONTROL_SELECT | PARPORT_CONTROL_AUTOFD));
-
+ value1 = bits & (value1 ^ PARPORT_CONTROL_INVERTED ^ inverted_control_bits);
+ value2 = bits & (value2 ^ PARPORT_CONTROL_INVERTED ^ inverted_control_bits);
#ifdef WITH_PPDEV
if (PPdev) {