aboutsummaryrefslogtreecommitdiffstats
path: root/README.MatrixOrbital
diff options
context:
space:
mode:
authorreinelt <reinelt@3ae390bd-cb1e-0410-b409-cd5a39f66f1f>2000-03-19 08:41:28 +0000
committerreinelt <reinelt@3ae390bd-cb1e-0410-b409-cd5a39f66f1f>2000-03-19 08:41:28 +0000
commit0774e24faa2ff2d78109f7614536746226dcaa91 (patch)
tree2232190c5c22f00a5491d272119daae75ad8c83d /README.MatrixOrbital
parent74dc0b10c7ab905c8fb7b4098774155a9b2828fd (diff)
downloadlcd4linux-0774e24faa2ff2d78109f7614536746226dcaa91.tar.gz
[lcd4linux @ 2000-03-19 08:41:28 by reinelt]
documentation available! README, README.MatrixOrbital, README.Drivers added Skeleton.c as a starting point for new drivers git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@14 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
Diffstat (limited to '')
-rw-r--r--README.MatrixOrbital40
1 files changed, 40 insertions, 0 deletions
diff --git a/README.MatrixOrbital b/README.MatrixOrbital
new file mode 100644
index 0000000..1138b49
--- /dev/null
+++ b/README.MatrixOrbital
@@ -0,0 +1,40 @@
+#
+# $Id: README.MatrixOrbital,v 1.1 2000/03/19 08:41:28 reinelt Exp $
+#
+
+This is the README file for the MatrixOrbital display driver for lcd4linux
+
+This driver supports the serial interface alphanumeric display modules by
+Matrix Orbital Corporation (http://www.matrixorbital.com).
+
+I could only test it with the LCD2041 model, but I think every other (LCD) model
+should work. These displays are supported:
+
+ LCD0821: 2 lines by 8 characters
+ LCD1621: 2 lines by 16 characters
+ LCD2021: 2 lines by 20 characters
+ LCD2041: 4 lines by 20 characters (tested)
+ LCD4021: 2 lines by 40 characters
+
+I could not test the vacuum fluorescent display models, but I think they should work, too.
+There are no entries for this models in the driver table (at the bottom of MatrixOrbital.c),
+but they could be easily added.
+
+The displays come with an RS-232 and an I2C interface. The driver supports the RS-232 interface
+only (because I have no idea how to find the I2C bus on my motherboard).
+
+Power can be applied either via an external DC power supply, a modified floppy power connector
+(be aware that you can destroy your display if you get the pins wrong!) or via the RI (ring)
+signal of the RS-232 port. I choosed the latter, and modified a serial card so that it supplies
++5V from the ISA bus to this pin (again, be aware that this is dangerous if you connect any other
+serial device to this modified port).
+
+The driver supports vertical, horizontal and split bars (two independent bars in one line),
+all bar types can be used simultanously. As the displays only have 8 user-defined characters,
+the needed characters to display all the bars must be reduced to 8. This is done by replacing
+characters with similar ones. To reduce flicker, a character which is displayed at the moment,
+will not be redefined, even if it's not used in this run. Only if the character compaction
+fails, this characters will be redefined, too.
+
+The displays have a GPO (general purpose output), where you can connect a LED or something.
+The driver supports controlling this GPO, but this function is unused by now.