[lcd4linux @ 2005-12-12 09:08:08 by reinelt]

finally removed old udelay code path; read timing values from config

git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@600 3ae390bd-cb1e-0410-b409-cd5a39f66f1f

4 files changed, 90 insertions, 107 deletions

diff --git a/drv_HD44780.c b/drv_HD44780.c
index 52b03dd..6d66903 100644
--- a/drv_HD44780.c
+++ b/drv_HD44780.c
@@ -1,4 +1,4 @@
-/* $Id: drv_HD44780.c,v 1.56 2005/12/12 05:52:03 reinelt Exp $
+/* $Id: drv_HD44780.c,v 1.57 2005/12/12 09:08:08 reinelt Exp $
  *
  * new style driver for HD44780-based displays
  *
@@ -32,6 +32,9 @@
  *
  *
  * $Log: drv_HD44780.c,v $
+ * Revision 1.57  2005/12/12 09:08:08  reinelt
+ * finally removed old udelay code path; read timing values from config
+ *
  * Revision 1.56  2005/12/12 05:52:03  reinelt
  * type of delays is 'unsigned long'
  *
@@ -298,28 +301,9 @@ static int Model;
 static int Capabilities;
 
 
-/* low level communication timings [nanoseconds]
- * as these values differ from spec to spec,
- * we use the worst-case values.
- */
-
-#define T_CYCLE 1000		/* Enable cycle time */
-#define T_PW     450		/* Enable pulse width */
-#define T_AS     140		/* Address setup time */
-#define T_H       40		/* Data hold time */
-#define T_AH      20		/* Address hold time */
-
-
-/* HD44780 execution timings [microseconds]
- * as these values differ from spec to spec,
- * we use the worst-case values.
- */
-
-#define T_INIT1 4100		/* first init sequence:  4.1 msec */
-#define T_INIT2  100		/* second init sequence: 100 usec */
-#define T_EXEC    80		/* normal execution time */
-#define T_WRCG   120		/* CG RAM Write */
-#define T_CLEAR 2250		/* Clear Display */
+/* Timings */
+static int T_CY, T_PW, T_AS, T_AH;
+static int T_INIT1, T_INIT2, T_EXEC, T_WRCG, T_CLEAR, T_HOME, T_ONOFF;
 
 
 static int Bits = 0;
@@ -561,8 +545,8 @@ static void drv_HD_PP_byte(const unsigned char controller, const unsigned char d
     /* send high nibble of the data */
     drv_HD_PP_nibble(controller, ((data >> 4) & 0x0f) | RS);
 
-    /* Make sure we honour T_CYCLE */
-    ndelay(T_CYCLE - T_AS - T_PW);
+    /* Make sure we honour T_CY */
+    ndelay(T_CY - T_AS - T_PW);
 
     /* send low nibble of the data */
     drv_HD_PP_nibble(controller, (data & 0x0f) | RS);
@@ -769,6 +753,30 @@ static int drv_HD_PP_load(const char *section)
 	Capabilities &= ~CAP_GPO;
     }
 
+    /* Timings */
+
+    /* low level communication timings [nanoseconds]
+     * as these values differ from spec to spec,
+     * we use the worst-case default values, but allow
+     * modification from the config file.
+     */
+    T_CY = timing(Name, section, "CY", 1000, "ns");	/* Enable cycle time */
+    T_PW = timing(Name, section, "PW", 450, "ns");	/* Enable pulse width */
+    T_AS = timing(Name, section, "AS", 140, "ns");	/* Address setup time */
+    T_AH = timing(Name, section, "AH", 20, "ns");	/* Address hold time */
+
+    /* HD44780 execution timings [microseconds]
+     * as these values differ from spec to spec,
+     * we use the worst-case default values, but allow
+     * modification from the config file.
+     */
+    T_INIT1 = timing(Name, section, "INIT1", 4100, "us");	/* first init sequence: 4.1 msec */
+    T_INIT2 = timing(Name, section, "INIT2", 100, "us");	/* second init sequence: 100 usec */
+    T_EXEC = timing(Name, section, "EXEC", 80, "us");	/* normal execution time */
+    T_WRCG = timing(Name, section, "WRCG", 120, "us");	/* CG RAM Write */
+    T_CLEAR = timing(Name, section, "CLEAR", 2250, "us");	/* Clear Display */
+    T_HOME = timing(Name, section, "HOME", 2250, "us");	/* Return Cursor Home */
+    T_ONOFF = timing(Name, section, "ONOFF", 2250, "us");	/* Display On/Off Control */
 
     /* clear all signals */
     if (Bits == 8) {
@@ -1313,7 +1321,7 @@ static int drv_HD_start(const char *section, const int quiet)
     }
 
     drv_HD_command(allControllers, 0x08, T_EXEC);	/* Controller off, cursor off, blink off */
-    drv_HD_command(allControllers, 0x0c, T_CLEAR);	/* Display on, cursor off, blink off, wait 1.64 ms */
+    drv_HD_command(allControllers, 0x0c, T_ONOFF);	/* Display on, cursor off, blink off, wait 1.64 ms */
     drv_HD_command(allControllers, 0x06, T_EXEC);	/* curser moves to right, no shift */
 
     if ((Capabilities & CAP_HD66712) && DROWS > 2) {
@@ -1323,7 +1331,7 @@ static int drv_HD_start(const char *section, const int quiet)
     }
 
     drv_HD_clear();		/* clear *all* displays */
-    drv_HD_command(allControllers, 0x03, T_CLEAR);	/* return home */
+    drv_HD_command(allControllers, 0x03, T_HOME);	/* return home */
 
     /* maybe set backlight */
     if (Capabilities & CAP_BACKLIGHT) {
diff --git a/lcd4linux.conf.sample b/lcd4linux.conf.sample
index da346fb..d75acbf 100644
--- a/lcd4linux.conf.sample
+++ b/lcd4linux.conf.sample
@@ -119,6 +119,21 @@ Display HD44780-winamp {
 	ENABLE2 'GND'
 	GPO     'GND'
     }
+    Timing {
+	# low-level communication [ns]
+	CY 1000  # Enable cycle time
+	PW  450  # Enable pulse width
+	AS  140  # Address setup time
+	AH   20  # Address hold time
+	# HD44780 execution timings [us]
+	INIT1 4100  # first init sequence: 4.1 msec
+	INIT2  100  # second init sequence: 100 usec
+	EXEC    80  # normal execution time
+	WRCG   120  # CG RAM Write
+	CLEAR 2250  # Clear Display
+	HOME  2250  # Return Cursor Home
+	ONOFF 2250  # Display On/Off Control
+    }
 }
 
 # Dual-HD44780 display from Pollin
@@ -828,7 +843,7 @@ Layout testMySQL {
 #Display 'MI240'
 #Display 'CW12232'
 #Display 'HD44780-generic'
-#Display 'HD44780-WinAmp'
+Display 'HD44780-WinAmp'
 #Display 'WDC2704M'
 #Display 'SC1602D'
 #Display 'LCM-162'
@@ -839,7 +854,7 @@ Layout testMySQL {
 #Display 'M50530-24x8'
 #Display 'LCDTerm'
 #Display 'SimpleLCD'
-Display 'BA63'
+#Display 'BA63'
 #Display 'CT20x4'
 #Display 'T6963-240x64'
 #Display 'XWindow'
diff --git a/udelay.c b/udelay.c
index e26bc08..82011db 100644
--- a/udelay.c
+++ b/udelay.c
@@ -1,4 +1,4 @@
-/* $Id: udelay.c,v 1.20 2005/05/08 04:32:45 reinelt Exp $
+/* $Id: udelay.c,v 1.21 2005/12/12 09:08:08 reinelt Exp $
  *
  * short delays
  *
@@ -23,6 +23,9 @@
  *
  *
  * $Log: udelay.c,v $
+ * Revision 1.21  2005/12/12 09:08:08  reinelt
+ * finally removed old udelay code path; read timing values from config
+ *
  * Revision 1.20  2005/05/08 04:32:45  reinelt
  * CodingStyle added and applied
  *
@@ -112,21 +115,19 @@
  *
  * exported fuctions:
  *
- * void udelay (unsigned long usec)
- *  delays program execution for usec microseconds
- *  uses global variable 'loops_per_usec', which has to be set before.
- *  This function does busy-waiting! so use only for delays smaller
- *  than 10 msec
- *
- * void udelay_calibrate (void) (if USE_OLD_UDELAY is defined)
- *   does a binary approximation for 'loops_per_usec'
- *   should be called several times on an otherwise idle machine
- *   the maximum value should be used
- *
  * void udelay_init (void)
  *   selects delay method (gettimeofday() ord rdtsc() according
  *   to processor features
  *
+ * unsigned long timing (const char *driver, const char *section, const char *name, const int defval, const char *unit);
+ *   returns a timing value from config or the default value
+ *
+ * void udelay (unsigned long usec)
+ *   delays program execution for usec microseconds
+ *   uses global variable 'loops_per_usec', which has to be set before.
+ *   This function does busy-waiting! so use only for delays smaller
+ *   than 10 msec
+ *
  */
 
 #include "config.h"
@@ -134,12 +135,6 @@
 #include <stdio.h>
 
 
-#ifdef USE_OLD_UDELAY
-
-#include <time.h>
-
-#else
-
 #include <math.h>
 #include <unistd.h>
 #include <fcntl.h>
@@ -151,58 +146,16 @@
 #include <asm/msr.h>
 #endif
 
-#endif
-
 
 #include "debug.h"
+#include "cfg.h"
+#include "qprintf.h"
 #include "udelay.h"
 
-#ifdef USE_OLD_UDELAY
-
-unsigned long loops_per_usec;
-
-void ndelay(const unsigned long nsec)
-{
-    unsigned long loop = (nsec * loops_per_usec + 999) / 1000;
-
-  __asm__(".align 16\n" "1:\tdecl %0\n" "\tjne 1b":	/* no result */
-  :"a"(loop));
-}
-
-/* adopted from /usr/src/linux/init/main.c */
-
-void udelay_calibrate(void)
-{
-    clock_t tick;
-    unsigned long bit;
-
-    loops_per_usec = 1;
-    while (loops_per_usec <<= 1) {
-	tick = clock();
-	while (clock() == tick);
-	tick = clock();
-	ndelay(1000000000 / CLOCKS_PER_SEC);
-	if (clock() > tick)
-	    break;
-    }
-
-    loops_per_usec >>= 1;
-    bit = loops_per_usec;
-    while (bit >>= 1) {
-	loops_per_usec |= bit;
-	tick = clock();
-	while (clock() == tick);
-	tick = clock();
-	ndelay(1000000000 / CLOCKS_PER_SEC);
-	if (clock() > tick)
-	    loops_per_usec &= ~bit;
-    }
-}
-
-#else
 
 static unsigned int ticks_per_usec = 0;
 
+
 static void getCPUinfo(int *hasTSC, double *MHz)
 {
     int fd;
@@ -269,7 +222,6 @@ void udelay_init(void)
     error("udelay: Even if your CPU supports TSC, it will not be used!");
     error("udelay: You *really* should install msr.h and recompile LCD4linux!");
 #endif
-
     {
 	ticks_per_usec = 0;
 	info("udelay: using gettimeofday() delay loop");
@@ -277,6 +229,23 @@ void udelay_init(void)
 }
 
 
+unsigned long timing(const char *driver, const char *section, const char *name, const int defval, const char *unit)
+{
+    char sec[256];
+    int ret, val;
+
+    qprintf(sec, sizeof(sec), "%s.Timing", section);
+
+    ret = cfg_number(sec, name, defval, 0, -1, &val);
+    if (val != defval) {
+	info("%s: timing: %6s = %5d %s (default %d %s)", driver, name, val, unit, defval, unit);
+    } else {
+	info("%s: timing: %6s = %5d %s (default)", driver, name, defval, unit);
+    }
+    return val;
+}
+
+
 void ndelay(const unsigned long nsec)
 {
 
@@ -314,5 +283,3 @@ void ndelay(const unsigned long nsec)
 	} while (now.tv_sec == end.tv_sec ? now.tv_usec < end.tv_usec : now.tv_sec < end.tv_sec);
     }
 }
-
-#endif
diff --git a/udelay.h b/udelay.h
index 3271c7f..aa26950 100644
--- a/udelay.h
+++ b/udelay.h
@@ -1,4 +1,4 @@
-/* $Id: udelay.h,v 1.10 2005/05/08 04:32:45 reinelt Exp $
+/* $Id: udelay.h,v 1.11 2005/12/12 09:08:08 reinelt Exp $
  *
  * short delays 
  *
@@ -23,6 +23,9 @@
  *
  *
  * $Log: udelay.h,v $
+ * Revision 1.11  2005/12/12 09:08:08  reinelt
+ * finally removed old udelay code path; read timing values from config
+ *
  * Revision 1.10  2005/05/08 04:32:45  reinelt
  * CodingStyle added and applied
  *
@@ -79,18 +82,8 @@ static inline void rep_nop(void)
     __asm__ __volatile__("rep; nop");
 }
 
-
-#ifdef USE_OLD_UDELAY
-
-extern unsigned long loops_per_usec;
-void udelay_calibrate(void);
-
-#else
-
 void udelay_init(void);
-
-#endif
-
+unsigned long timing(const char *driver, const char *section, const char *name, const int defval, const char *unit);
 void ndelay(const unsigned long nsec);
 
 #define udelay(usec) ndelay(usec*1000)