Installation Instructions
*************************
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
2006, 2007 Free Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
documentation.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
6. Often, you can also type `make uninstall' to remove the installed
files again.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that the
`configure' script does not know about. Run `./configure --help' for
details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' cannot figure out automatically,
but needs to determine by the type of machine the package will run on.
Usually, assuming the package is built to be run on the _same_
architectures, `configure' can figure that out, but if it prints a
message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share, you
can create a site shell script called `config.site' that gives default
values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf bug. Until the bug is fixed you can use this workaround:
CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
`configure' recognizes the following options to control how it operates.
`--help'
`-h'
Print a summary of the options to `configure', and exit.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
# Channel table for Franco da Rocha - SP - Brazil
# Source: http://www.portalbsd.com.br/terrestres_channels.php?channels=2937
# Physical channel 18
[Globo SP]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 497142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 20
[Rede Record]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 509142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 22
[Rede 21]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 521142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 23
[Band]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 527142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 24
[TV Cultura, Univesp, Multicultura Educação]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 533142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 25
[TVCI]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 539142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 26
[CNT Americana]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 545142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 28
[SBT SP]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 557142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 29
[Rede TV!]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 563142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 30
[RIT]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 569142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 31
[Ideal TV]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 575142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 33
[Top TV, Kiss TV, Top TV Rádios]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 587142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 39
[Rede Vida]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 623142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 47
[NGT]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 671142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 61
[TV Câmara, TV Assembleia SP, TV Senado, TV Câmara Municipal SP]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 755142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
# Physical channel 63
[TV Brasil, NBR, TV Escola, Canal Saúde]
DELIVERY_SYSTEM = ISDBT
BANDWIDTH_HZ = 6000000
FREQUENCY = 767142857
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
INVERSION = AUTO
GUARD_INTERVAL = AUTO
TRANSMISSION_MODE = AUTO
ISDBT_LAYER_ENABLED = 7
ISDBT_SOUND_BROADCASTING = 0
ISDBT_SB_SUBCHANNEL_ID = 0
ISDBT_SB_SEGMENT_IDX = 0
ISDBT_SB_SEGMENT_COUNT = 0
ISDBT_LAYERA_FEC = AUTO
ISDBT_LAYERA_MODULATION = QAM/AUTO
ISDBT_LAYERA_SEGMENT_COUNT = 0
ISDBT_LAYERA_TIME_INTERLEAVING = 0
ISDBT_LAYERB_FEC = AUTO
ISDBT_LAYERB_MODULATION = QAM/AUTO
ISDBT_LAYERB_SEGMENT_COUNT = 0
ISDBT_LAYERB_TIME_INTERLEAVING = 0
ISDBT_LAYERC_FEC = AUTO
ISDBT_LAYERC_MODULATION = QAM/AUTO
ISDBT_LAYERC_SEGMENT_COUNT = 0
ISDBT_LAYERC_TIME_INTERLEAVING = 0
|