All tables are now using DVBv5 format. That allows suporting all standards available on a standard way. GENERATING FILES TO THE LEGACY DVBV3 FORMAT =========================================== A Makefile target is provided to convert to the legacy channel format. For it to work, you need to have v4l-utils installed (specifically, the v4l-utils package that contains the dvbv5 utils). Be sure that you have at least version 1.4.0 installed, or, if you're compiling v4l-utils from its source. Versions below may work too, but some DVB files won't be properly parsed with earlier versions. This is the minimal changeset of v4l-utils required for it to work: commit 64751eb98a15b9c0077d8c2e4409b9b69ac80448 Date: Fri Sep 5 15:50:43 2014 -0300 Subject: libdvbv5: make sure that all needed properties are filled You can download and install v4l-utils from: http://git.linuxtv.org/cgit.cgi/v4l-utils.git/ Once having it installed, generating all the tables usind DVBv3 channel format is as easy as running: $ make clean $ make dvbv3 The files can also be individually converted from DVBv5 to DVBv3 with: $ dvb-format-convert -I dvbv5 -O channel dvb-c/ch-Rega-Sense legacy-format-ch-Rega-Sense And converting back into DVBv5 format with: $ dvb-format-convert -I channel -O dvbv5 legacy-format-ch-Rega-Sense dvb-c/ch-Rega-Sense Plese notice that comments are not preserved when doing the conversions. PS.: If you're willing to submit new entries and/or corrections, please be sure to send them at the DVBv5 format and sending them via e-mail to linux-media@vger.kernel.org. INSTALL ======= In order to install the files, use: $ make install By default, it will install the files at /usr/local/share/dvbv5. In order to install the legacy v3 formatted files, use: $ make install_v3 Don't forget to run "make dvbv3" before running the above command, in order to convert the files to the legacy format. By default, it will install the files at /usr/local/share/dvbv3. There are a few extra parameters that could be used to define where the files will be stored: PREFIX= (default: /usr/local) DATADIR= (default: $(PREFIX/share) DVBV5DIR= (default: dvbv3) DVBV3DIR= (default: dvbv5) So, if it is desired to install both v3 and v5 files at a tmp file, under the current dir, the install command would be: $ make install install_v3 PREFIX=`pwd`/tmp Installing dvbv5-formatted files at /home/myuser/dtv-scan-tables/tmp/share/dvbv5...done. Installing dvbv3-formatted files at /home/myuser/dtv-scan-tables/tmp/share/dvbv3...done. Please also note that install takes some time, as there are lots of files to be copied. AgeCommit message (Expand)AuthorFilesLines 2003-09-10[lcd4linux @ 2003-09-10 14:01:52 by reinelt]reinelt6-21/+110 2003-09-10[lcd4linux @ 2003-09-10 08:37:09 by reinelt]reinelt2-50/+73 2003-09-10[lcd4linux @ 2003-09-10 03:48:22 by reinelt]reinelt7-47/+130 2003-09-09[lcd4linux @ 2003-09-09 11:47:47 by reinelt]reinelt3-14/+37 2003-09-09[lcd4linux @ 2003-09-09 06:54:43 by reinelt]reinelt15-135/+177 2003-09-09[lcd4linux @ 2003-09-09 05:30:33 by reinelt]reinelt11-90/+243 2003-09-01[lcd4linux @ 2003-09-01 07:07:03 by reinelt]reinelt8-402/+13825 2003-09-01[lcd4linux @ 2003-09-01 04:09:34 by reinelt]reinelt9-28/+127 2003-08-24[lcd4linux @ 2003-08-24 05:28:31 by reinelt]reinelt1-119/+156 2003-08-24[lcd4linux @ 2003-08-24 05:17:58 by reinelt]reinelt25-131/+217 2003-08-24[lcd4linux @ 2003-08-24 04:31:56 by reinelt]reinelt6-11/+154 2003-08-22[lcd4linux @ 2003-08-22 03:45:08 by reinelt]reinelt3-8/+25 2003-08-20[lcd4linux @ 2003-08-20 05:26:43 by reinelt]reinelt1-9/+11 2003-08-19[lcd4linux @ 2003-08-19 05:23:55 by reinelt]reinelt2-62/+123 2003-08-19[lcd4linux @ 2003-08-19 04:28:41 by reinelt]reinelt4-19/+42 2003-08-17[lcd4linux @ 2003-08-17 16:37:39 by reinelt]reinelt5-23/+77 2003-08-17[lcd4linux @ 2003-08-17 12:11:58 by reinelt]reinelt6-27/+118 2003-08-17[lcd4linux @ 2003-08-17 08:25:30 by reinelt]reinelt6-46/+185 2003-08-17[lcd4linux @ 2003-08-17 06:57:04 by reinelt]reinelt5-544/+325