aboutsummaryrefslogtreecommitdiffstats
path: root/dvb-t (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-09-05Convert existing tables to DVBv5 formatMauro Carvalho Chehab733-3612/+43016
All comments were preserved on this conversion, thanks to a temporary patch for libdvbv5. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-04fix dvb-t/ug-All DVB-T2 formatMauro Carvalho Chehab1-8/+3
On all other DVB-T2 files, the PLP ID is at the end of the file. Move it to the end, to be equal to the other files. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-04Fix FEC on dvb-t/sk-BratislavaMauro Carvalho Chehab1-1/+1
FEC=2/1 doesn't exist. It should be, instead 1/2. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-04The ca-AB-Calgary file has an invalid line. Fix it.Mauro Carvalho Chehab1-2/+1
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-31Updated scan file for es-Cadiz (Andalusia)Guillermo Gutiérrez1-7/+30
2014-08-28Updated dvb-t/au-Melbourne scan tablePaul Freeman1-12/+23
Attached is a diff patch file to update dvb-t/au-Melbourne for the new transmission frequency for SBS which came into effect in early 2014 as well as adding channel 31, a community channel. Could this please be considered for patching the existing file? Regards Paul Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2014-06-12Add Estonian muxesIndrek Ardel1-0/+37
2014-06-12Added new mux (H) for FinlandOlli Salonen6-11/+23
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2014-05-12fr-All incorrectly uses MHZ instead of MHz and K instead of kOlliver Schinagl1-40/+40
This was forwarded from the debian bug tracker known as Bug #746404 find that the caseing in fr-All has been corrected. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2014-05-12update DVB-T Finland Digita networkAntti Palosaari192-199/+210
Signed-off-by: Antti Palosaari <crope@iki.fi>
2014-05-12Updated scan table for ch-CitycableAntonio Cunei1-0/+11
2014-05-12Change Sydney FEC settings to AUTO.Peter Urbanec1-6/+6
The FEC settings are not stipulated by the government as part of the license and a number of broadcasters claim that the transmission parameters are subject to change. Additionally, the old settings were fec_lo=NONE, which is not completely accurate, since the observed values are never NONE. The code in scan will substitute FEC_AUTO for FEC_NONE, but we might as well be explicit.
2014-05-12Update comments to reflect the technical information provided by ↵Peter Urbanec1-7/+8
http://myswitch.digitalready.gov.au/
2014-05-12Rename Sydney tables as part of the digital restack.Peter Urbanec1-0/+0
ACMA.gov.au now considers the Sydney metropolitan area as one TLAP (television license area plan) and has allocated new frequencies which cover all the transmitters that were previously split between au-Sydney_North_Shore (main transmitters) and au-Sydney_Kings_Cross (in-fill transmitters). The Sydney digital restack was completed on 18 Mar 2014.
2014-03-26Updated scan table for au-Sydney_North_Shoreamak791-4/+4
Hi, Please find attached an updated scan table for au-Sydney_North_Shore. The main change is that the frequency for channel SBS is now 184500000[1]. The comment for channel D44 has been changed to "TVS UHF29". D44 is the name of the trial data casting service that ended in 2010[2]. The community channel TVS now broadcasts on this service[3]. [1] http://www20.sbs.com.au/transmissions/index.php?pid=2&id=902 [2] http://en.wikipedia.org/wiki/Digital_Forty_Four [3] http://www.tvs.org.au/info/tune-in Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2014-03-26UK Update for COM 7, BBC B, and Local MuxesSimon Liddicott81-647/+676
Auto scan came from digitaluk rather than Ofcom as they have taken too long to update. They now only have single spaces between columns. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2014-03-09DTV scantables for FIOlli Salonen34-0/+170
Hello Oliver, Seeing as you're the owner of the dtv-scan-tables GIT repository, I thought I'd contact you regarding this. In Finland we've had a second DVB-T provider for about the last 1 year. Instead of the former state owned broadcaster Digita, there's another provider called DNA now. I extracted the frequency data from their website and create scanfiles based on that. I named them fi-DNA-<cityname>. Maybe you can include them in the GIT repository as I don't have access? Thanks! Cheers, -olli Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2014-02-14Update es-AlfabiaJesus Jimenez1-5/+8
Updated muxes
2014-01-25Initial tuning data for ca-AB-CalgaryDark Shadow1-0/+19
Updated initial tuning data for ca-AB-Calgary with more channels for the repository. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2014-01-14Initial scan table for au-Melbourne-SelbyPhilip Yarra1-0/+13
Hi, please find attached a scan table for au-Melbourne-Selby. This file is very similar to the scan table file for au-Melbourne-Upwey (which I was able to use until quite recently). However the fec_hi value of "2/3" for SBS no longer works for me, and I need to use "AUTO" instead. I don't know if this change also affects the Upwey repeater. Details on the geographic locations of these repeaters can be found here: Upwey: http://www20.sbs.com.au/transmissions/index.php?pid=2&id=795 Selby: http://www20.sbs.com.au/transmissions/index.php?pid=2&id=792 Note that the Selby repeater actually covers the parts of Upwey which are not able to get signal from the Upwey repeater, due to hilly terrain. Although they use identical frequencies, the polarisation is different. I assume AUTO allows the DVB tuner to choose one of the FEC types dynamically, though I don't know if this is supported by all tuners. If there's a way I can find out which actual fec_hi is in use, please let me know and I will supply it. I have provided a brief write-up at http://pyarra.blogspot.com.au/2014/01/mythtv-and-sbs-in-dandenong-ranges.html - please let me know if there is further information I can provide. Regards, Philip. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2013-11-04Initial Tuning Data for UgandaJoseph Zik1-0/+16
Hello all, I wanted to contribute to dvb-apps package with initial DVB-T tuning data for Uganda, Africa Attached is the scan file. Please let me know, if there's any other info I can provide. Thank you -- Joseph Zik
2013-09-30Initial scan files for PTNuno Gonçalves2-3/+9
Here goes the initial scan files for Portugal DVB-T. Please commit them. Portugal is schedule to migrate from a SFN to a MFN, but for now this is how it is. Files in attach and also the hg diff: Regards, Nuno Goncalves Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
2013-09-20Merge pull request #6 from silid/masterOliver Schinagl84-854/+1210
Update UK DVB-T settings
2013-09-20Table /usr/share/dvb/dvb-t/cz-All outdatedJonathan McCrohan1-51/+43
reassign 720879 dtv-scan-tables forwarded 720879 oliver@schinagl.nl thanks Hi Pavel, On 25/08/13 22:32, Pavel Mendl wrote: > Package: dvb-apps > Version: 1.1.1+rev1483-1 > > When I did run scan command using /usr/share/dvb/dvb-t/cz-All table, some > channels that my "ordinary" TV did tune did not tune (even attempt to tune) on > the PC TV adapter. I traced issue to > the aforementioned table, which is (by commented header inside the table) > taken from public sources not directly under the CZ TV regulator's control. I > found the official broadcast spectrum > regulation (as of August 2012 - currently valid) here > http://www.ctu.cz/cs/download/plan-vyuziti-radioveho-spektra/rok_2012/pv- > p_10-08_2012-11.pdf > > It states on pages 9, 15-16 that all the channels 21-60 are allocated for > various DVB-T networks in the country. The aforementioned table cz-All did > include just some of them, what lead to > "missing" of some newly installed channels from the scanning. (Understandable, > DVB-T is still in the development phase in Czech republic and many spectrum > allocations are still designated as > testing or not-definitive.) > > Attached is the new table I created, ensuring scan of all the channels > theoretically allocatable in Czech republic. Tested on my own comp it really > found channels consistent with the TV box scan, > with no bugging. > > The only part I am not sure about is the guard-interval where 1/4 and 1/8 > values were irregularly mixed in the original table and no regulatory > guidelines are released. Based on the theoretical > assumption, that 1/8 should tune (i.e. not exclude) more channels than 1/4, I > entered 1/8 for all the channels. Should you have better experience or > regulatory resources on the topic, please, > correct these values as appropriate. > > I suggest to replace the cz-All table with my updated one in the next release. Thanks for your mail. The scan files have been split out into a separate package called dtv-scan-tables. Therefore I am reassigning it to d-s-t. Oliver Schinagl (CC'd) is the upstream dtv-scan-tables maintainer. I have reattached your cz-All-actual-2013 for his consideration. Thanks, Jon Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
2013-09-18Removal of excess white spacesilid81-565/+565
2013-09-18Update UK DVB-T settingssilid84-854/+1210
Update includes national muxes from <http://www.ofcom.org.uk/static/broadcasting/National-Muxes.csv> Renames three files to match Ofcom names.
2013-07-15New DVB-T2 muxes for Russia, Ukraine.CrazyCat7-3/+27
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
2013-07-15Some multistream transponders.CrazyCat3-0/+18
Some DVB-T2 muxes for RU and UA. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
2013-07-15Add initial DVB-T frequencies for BulgariaVladimir Lalov1-0/+16
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
2013-07-15Add the latest tuning & channel config data of Taiwan.Huei-Horng Yo3-13/+11
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
2013-07-03fr-Bordeaux and fr-Cherbourg are allready in fr-All, removedOliver Schinagl2-19/+0
On 06/16/13 10:15, Duval Mickael wrote: > It is true that only scans once! It can therefore be quite limited at > this fr_All file and remove fr_Cherbourg and fr_Bordeaux.
2013-06-15DVB Scan file for Cherbourg (FR)Duval Mickael2-6/+50
Ok I have cloned your repo with Git, and I've make two patch files. 2013/6/15 Duval Mickael <duvalmickael@gmail.com>: > In zip there is a little modification for city of cherbourg (add two > new muxes) and a fr_ALL for France all channels DVB-T initial > scan. > > What's the problem exactly with my files? > > Thanks > Duval Mickael > > 2013/6/14 Oliver Schinagl <oliver+list@schinagl.nl>: >> On 06/13/13 19:10, Duval Mickael wrote: >>> >>> Hello, >> >> Hi, >> >>> >>> I send this email to you for a DVB-T scan file for the city of Cherbourg >>> FRANCE, modified with the last channels. >>> I also enclose a package file that includes all channels available for >>> DVB-T in France. >> >> I've applied your patch (after manually working it over) last time. >> >> What is in this zip? Please send a patch file what still needs to be >> adjusted. Cherbourg is in the repo now, isn't it? >> >>> >>> Sorry for my poor English ;-) >>> >>> Thank you. >> >> From 1b9f07365b91641543ce7fdbeae400e364279024 Mon Sep 17 00:00:00 2001 From: inrepublica <admin@inrepublica.fr> Date: Sat, 15 Jun 2013 10:43:32 +0200 Subject: [PATCH 1/2] Add two muxes for fr_Cherbourg.
2013-06-09DVB Scan file for Cherbourg (FR)Duval Mickael1-0/+8
Hello, I send this email to you for a DVB-T scan file for the city of Cherbourg (France). Sorry for my poor English ;-) Thank you for your work. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
2013-04-14Update for Austrian DVB-TOliver Schinagl2-24/+53
Renamed at-Official to at-All. Added and updated all frequencies. from http://www.ors.at/fileadmin/user_upload/downloads/DVB-T_Kanalbezeichnungen_und_Mittenfrequenzen.pdf No further details are given besides an 8MHz bandwith so assuming the previous settings for now. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
2013-02-27Update DVB-T Frequencies for nl-AllOliver Schinagl1-6/+8
The Frequency for NL has changed recently. Anything above channel 60 is no longer allowed and thus has been removed. Also some other changes due to the destruction and rebuilding of 'Hoogersmilde'. Reported by Geert Hedde Bosman <geert.hedde.bosman@gmail.com> Hello, in summer 2012 in the Netherlands major frequency changes took place in DVB-t broadcast. Some new frequencies were added as well. Therefore the frequency-file dvb/dvb-t/nl-All is no longer actual. Could someone (i believe Cristoph P. is one of the maintainers) please update this file? The website http://radio-tv-nederland.nl/ provides an up to date frequency list. As an example: i had to add the following line to the file 'nl-All' to get the FTA tv-stations in the north of the Netherlands as it was missing: T 674000000 8MHz 1/2 NONE QAM64 8k 1/4 NONE regards GHB
2013-02-21DVB-Tdvb-t.portugal@sapo.pt1-0/+3
Hello. I am sending the file for DVB-T in Portugal (excluding Madeira and Azores) retrieved at Lisbon. dvb-t/pt-Lisbon | 3 +++ 1 file changed, 3 insertions(+) create mode 100644 dvb-t/pt-Lisbon
2013-02-14lu-allMichael Stilmant1-0/+1
Hello, In attachment what I think is a patch for Luxembourg DVB-T initial scan ("git diff origin master > lux-all.diff") "Adding Channel 21 broadcasting 'Air' since 28/02/2011" best regards, Michael
2013-01-10update scan files for Ireland (ie-*)Jonathan McCrohan8-16/+16
Fix erroneous transmission parameters Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
2013-01-10update scan files for Ireland (ie-*)Jonathan McCrohan12-19/+19
ASO frequency changes; effective 24th Oct 2012. Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
2013-01-10update Finland DVB-T initial tuning filesAntti Palosaari215-444/+452
2013-01-10DVB-T Scan File Update Required for au-DarwinBen Manfield1-0/+2
Could you please include the following channel in your scan file for au-Darwin? T 564625000 7Mhz 3/4 QAM64 8k 1/16 None Cheers, Ben
2013-01-10New initial scan for PL-CzestochowaJakub Kasprzycki1-0/+14
Hi everyone, as we are now in a process of turning into dvb-t in Poland I would like to help others setting their tuners. Here it is the file PL-Czestochowa
2012-12-06scan_data/cz-all: 4th multiplex has FEC 3/4Jiri Slaby1-8/+8
Not 2/3. This I inappropriatelly got from the website. But it is wrong. 3/4 is definitely correct. Change that so that we can actually tune that multiplex.
2012-09-13update scan files for hu-*Christoph Pfister37-259/+474
submitted by triiisz+macs gmail.com
2012-09-13add scan files for ar-Argentina and br-BrazilChristoph Pfister2-0/+126
submitted by hmronline gmail.com
2012-06-26proper dvb-t scan data for Czech RepublicJiri Slaby1-14/+25
The tuning parameters are different for multiplexes 3 and 4. And the scan data are invalid for them. Further there are few more transmitters built in here. Especially for mux 4. So it is added too.
2012-04-10add scan file for pl-GdanskChristoph Pfister1-0/+4
submitted by jaka857 interia.pl
2012-03-15update scan file for sk-Bratislava with regional provider.Lubomir Carik1-0/+7
2012-03-11add scan file for pl-KrakowChristoph Pfister1-0/+17
submitted by damian.golda gmail.com
2012-03-11update scan files for fi-*Christoph Pfister8-2/+9
submitted by crope iki.fi
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 20:02:12 +0000