| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
All comments were preserved on this conversion, thanks to a
temporary patch for libdvbv5.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
Hi, please find attached a scan table for au-Melbourne-Selby. This file
is very similar to the scan table file for au-Melbourne-Upwey (which I
was able to use until quite recently). However the fec_hi value of "2/3"
for SBS no longer works for me, and I need to use "AUTO" instead. I
don't know if this change also affects the Upwey repeater.
Details on the geographic locations of these repeaters can be found here:
Upwey: http://www20.sbs.com.au/transmissions/index.php?pid=2&id=795
Selby: http://www20.sbs.com.au/transmissions/index.php?pid=2&id=792
Note that the Selby repeater actually covers the parts of Upwey which
are not able to get signal from the Upwey repeater, due to hilly
terrain. Although they use identical frequencies, the polarisation is
different.
I assume AUTO allows the DVB tuner to choose one of the FEC types
dynamically, though I don't know if this is supported by all tuners. If
there's a way I can find out which actual fec_hi is in use, please let
me know and I will supply it.
I have provided a brief write-up at
http://pyarra.blogspot.com.au/2014/01/mythtv-and-sbs-in-dandenong-ranges.html
- please let me know if there is further information I can provide.
Regards,
Philip.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
|
|
http://linuxtv.org/pipermail/linux-dvb/2008-January/023035.html
|
|
http://linuxtv.org/pipermail/linux-dvb/2007-June/018541.html
|
|
patch from Matthias Schwarzott:
- use utf8 everywhere for files & file names
additionally by me:
- remove empty lines at the beginning of the files
- remove any control character (< 0x20) except \n and \t
- remove trailing whitespace
- exactly one newline at the end of the files
- remove junk from dvb-t/au-Melbourne-Upwey
|
|
|
|
them compile with the dvb-kernel DVB API includes (uint32_t etc.)
---
Makefile | 8
TODO | 3
util/scan/dvb-c/at-Vienna | 3
util/scan/dvb-c/ch-unknown | 3
util/scan/dvb-c/de-Berlin | 4
util/scan/dvb-c/de-iesy | 3
util/scan/dvb-c/fi-3ktv | 3
util/scan/dvb-c/fi-vaasa-oncable | 13 +
util/scan/dvb-s/Astra-19.2E | 3
util/scan/dvb-s/Hispasat-30.0W | 6
util/scan/dvb-s/Hotbird-13.0E | 3
util/scan/dvb-s/PAS-43.0W | 6
util/scan/dvb-s/Sirius-5.0E | 5
util/scan/dvb-s/Telecom2-8.0W | 4
util/scan/dvb-s/Telstar12-15.0W | 4
util/scan/dvb-s/Thor-1.0W | 8
util/scan/dvb-s/Turksat-42.0E | 4
util/scan/dvb-t/au-Darwin | 5
util/scan/dvb-t/au-canberra | 12 +
util/scan/dvb-t/au-sydney_north_shore | 12 +
util/scan/dvb-t/au-unknown | 3
util/scan/dvb-t/de-Berlin | 5
util/scan/dvb-t/es-Collserola | 6
util/scan/dvb-t/fi-Espoo | 3
util/scan/dvb-t/fi-Turku | 3
util/scan/dvb-t/uk-BlackHill | 3
util/scan/dvb-t/uk-CrystalPalace | 3
util/scan/dvb-t/uk-Hannington | 3
util/scan/dvb-t/uk-Oxford | 3
util/scan/dvb-t/uk-PontopPike | 3
util/scan/dvb-t/uk-Redruth | 3
util/scan/dvb-t/uk-Reigate | 3
util/scan/dvb-t/uk-Rowridge | 3
util/scan/dvb-t/uk-SandyHeath | 3
util/scan/dvb-t/uk-Storeton | 3
util/scan/dvb-t/uk-WinterHill | 3
util/szap/channels.conf-dvbc-berlin | 171 +++++++++++++++++++++
util/szap/channels.conf-dvbs-astra | 226 ++++++++++++++++++++++++++++
util/szap/channels.conf-dvbt-australia | 31 +++
util/szap/channels.conf-dvbt-berlin | 51 ++++++
util/szap/channels.conf-dvbt-collserola | 25 +++
util/szap/channels.conf-dvbt-crystal-palace | 70 ++++++++
util/szap/channels.conf-dvbt-hannington | 28 +++
util/szap/channels.conf-dvbt-madrid | 16 +
util/szap/channels.conf-dvbt-oxford | 41 +++++
util/szap/channels.conf-dvbt-reigate | 51 ++++++
util/szap/channels.conf-dvbt-sandy_heath | 13 +
47 files changed, 888 insertions(+)
+++ scanscan/dvb-c/at-Vienna
@@ -0,0 +1,3 @@
+# Kabel Vienna
+# freq sr fec mod
+C 377750000 6900000 NONE QAM256
|
|
http://linuxtv.org/pipermail/linux-dvb/2008-January/023035.html
|
|
http://linuxtv.org/pipermail/linux-dvb/2007-June/018541.html
|
|
patch from Matthias Schwarzott:
- use utf8 everywhere for files & file names
additionally by me:
- remove empty lines at the beginning of the files
- remove any control character (< 0x20) except \n and \t
- remove trailing whitespace
- exactly one newline at the end of the files
- remove junk from dvb-t/au-Melbourne-Upwey
|
|
|
