Imported Upstream version 0.8.0upstream/0.8.0

1 files changed, 4588 insertions, 0 deletions

diff --git a/nl80211.h b/nl80211.h
new file mode 100644
index 0000000..241220c
--- /dev/null
+++ b/nl80211.h
@@ -0,0 +1,4588 @@
+#ifndef __LINUX_NL80211_H
+#define __LINUX_NL80211_H
+/*
+ * 802.11 netlink interface public header
+ *
+ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
+ * Copyright 2008 Michael Buesch <m@bues.ch>
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * This header file defines the userspace API to the wireless stack. Please
+ * be careful not to break things - i.e. don't move anything around or so
+ * unless you can demonstrate that it breaks neither API nor ABI.
+ *
+ * Additions to the API should be accompanied by actual implementations in
+ * an upstream driver, so that example implementations exist in case there
+ * are ever concerns about the precise semantics of the API or changes are
+ * needed, and to ensure that code for dead (no longer implemented) API
+ * can actually be identified and removed.
+ * Nonetheless, semantics should also be documented carefully in this file.
+ */
+
+#include <linux/types.h>
+
+#define NL80211_GENL_NAME "nl80211"
+
+#define NL80211_MULTICAST_GROUP_CONFIG		"config"
+#define NL80211_MULTICAST_GROUP_SCAN		"scan"
+#define NL80211_MULTICAST_GROUP_REG		"regulatory"
+#define NL80211_MULTICAST_GROUP_MLME		"mlme"
+#define NL80211_MULTICAST_GROUP_VENDOR		"vendor"
+#define NL80211_MULTICAST_GROUP_TESTMODE	"testmode"
+
+/**
+ * DOC: Station handling
+ *
+ * Stations are added per interface, but a special case exists with VLAN
+ * interfaces. When a station is bound to an AP interface, it may be moved
+ * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
+ * The station is still assumed to belong to the AP interface it was added
+ * to.
+ *
+ * Station handling varies per interface type and depending on the driver's
+ * capabilities.
+ *
+ * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
+ * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
+ *  - a setup station entry is added, not yet authorized, without any rate
+ *    or capability information, this just exists to avoid race conditions
+ *  - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
+ *    to add rate and capability information to the station and at the same
+ *    time mark it authorized.
+ *  - %NL80211_TDLS_ENABLE_LINK is then used
+ *  - after this, the only valid operation is to remove it by tearing down
+ *    the TDLS link (%NL80211_TDLS_DISABLE_LINK)
+ *
+ * TODO: need more info for other interface types
+ */
+
+/**
+ * DOC: Frame transmission/registration support
+ *
+ * Frame transmission and registration support exists to allow userspace
+ * management entities such as wpa_supplicant react to management frames
+ * that are not being handled by the kernel. This includes, for example,
+ * certain classes of action frames that cannot be handled in the kernel
+ * for various reasons.
+ *
+ * Frame registration is done on a per-interface basis and registrations
+ * cannot be removed other than by closing the socket. It is possible to
+ * specify a registration filter to register, for example, only for a
+ * certain type of action frame. In particular with action frames, those
+ * that userspace registers for will not be returned as unhandled by the
+ * driver, so that the registered application has to take responsibility
+ * for doing that.
+ *
+ * The type of frame that can be registered for is also dependent on the
+ * driver and interface type. The frame types are advertised in wiphy
+ * attributes so applications know what to expect.
+ *
+ * NOTE: When an interface changes type while registrations are active,
+ *       these registrations are ignored until the interface type is
+ *       changed again. This means that changing the interface type can
+ *       lead to a situation that couldn't otherwise be produced, but
+ *       any such registrations will be dormant in the sense that they
+ *       will not be serviced, i.e. they will not receive any frames.
+ *
+ * Frame transmission allows userspace to send for example the required
+ * responses to action frames. It is subject to some sanity checking,
+ * but many frames can be transmitted. When a frame was transmitted, its
+ * status is indicated to the sending socket.
+ *
+ * For more technical details, see the corresponding command descriptions
+ * below.
+ */
+
+/**
+ * DOC: Virtual interface / concurrency capabilities
+ *
+ * Some devices are able to operate with virtual MACs, they can have
+ * more than one virtual interface. The capability handling for this
+ * is a bit complex though, as there may be a number of restrictions
+ * on the types of concurrency that are supported.
+ *
+ * To start with, each device supports the interface types listed in
+ * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
+ * types there no concurrency is implied.
+ *
+ * Once concurrency is desired, more attributes must be observed:
+ * To start with, since some interface types are purely managed in
+ * software, like the AP-VLAN type in mac80211 for example, there's
+ * an additional list of these, they can be added at any time and
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN
+ * cannot be added without a corresponding AP interface). This list
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
+ *
+ * Further, the list of supported combinations is exported. This is
+ * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
+ * it exports a list of "groups", and at any point in time the
+ * interfaces that are currently active must fall into any one of
+ * the advertised groups. Within each group, there are restrictions
+ * on the number of interfaces of different types that are supported
+ * and also the number of different channels, along with potentially
+ * some other restrictions. See &enum nl80211_if_combination_attrs.
+ *
+ * All together, these attributes define the concurrency of virtual
+ * interfaces that a given device supports.
+ */
+
+/**
+ * DOC: packet coalesce support
+ *
+ * In most cases, host that receives IPv4 and IPv6 multicast/broadcast
+ * packets does not do anything with these packets. Therefore the
+ * reception of these unwanted packets causes unnecessary processing
+ * and power consumption.
+ *
+ * Packet coalesce feature helps to reduce number of received interrupts
+ * to host by buffering these packets in firmware/hardware for some
+ * predefined time. Received interrupt will be generated when one of the
+ * following events occur.
+ * a) Expiration of hardware timer whose expiration time is set to maximum
+ * coalescing delay of matching coalesce rule.
+ * b) Coalescing buffer in hardware reaches it's limit.
+ * c) Packet doesn't match any of the configured coalesce rules.
+ *
+ * User needs to configure following parameters for creating a coalesce
+ * rule.
+ * a) Maximum coalescing delay
+ * b) List of packet patterns which needs to be matched
+ * c) Condition for coalescence. pattern 'match' or 'no match'
+ * Multiple such rules can be created.
+ */
+
+/**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+ *
+ * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
+ *	to get a list of all present wiphys.
+ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
+ *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
+ *	attributes determining the channel width; this is used for setting
+ *	monitor mode channel),  %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
+ *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
+ *	instead, the support here is for backward compatibility only.
+ * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
+ *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
+ *	%NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
+ *
+ * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
+ *	either a dump request for all interfaces or a specific get with a
+ *	single %NL80211_ATTR_IFINDEX is supported.
+ * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
+ * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
+ *	to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
+ *	be sent from userspace to request creation of a new virtual interface,
+ *	then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
+ *	%NL80211_ATTR_IFNAME.
+ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
+ *	userspace to request deletion of a virtual interface, then requires
+ *	attribute %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
+ *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
+ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
+ *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
+ * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
+ *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
+ *	and %NL80211_ATTR_KEY_SEQ attributes.
+ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
+ *	or %NL80211_ATTR_MAC.
+ *
+ * @NL80211_CMD_GET_BEACON: (not used)
+ * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
+ *	using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
+ *	attributes. For drivers that generate the beacon and probe responses
+ *	internally, the following attributes must be provided: %NL80211_ATTR_IE,
+ *	%NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
+ * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
+ *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
+ *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
+ *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
+ *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
+ *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
+ *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
+ *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
+ *	The channel to use can be set on the interface or be given using the
+ *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
+ * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
+ * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
+ * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
+ *
+ * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
+ *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
+ *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
+ *	the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
+ *	or, if no MAC address given, all stations, on the interface identified
+ *	by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
+ *	%NL80211_ATTR_REASON_CODE can optionally be used to specify which type
+ *	of disconnection indication should be sent to the station
+ *	(Deauthentication or Disassociation frame and reason code for that
+ *	frame).
+ *
+ * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
+ * 	destination %NL80211_ATTR_MAC on the interface identified by
+ * 	%NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
+ * 	destination %NL80211_ATTR_MAC on the interface identified by
+ * 	%NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
+ *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
+ *	%NL80211_ATTR_MAC.
+ * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
+ *	the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
+ *	or, if no MAC address given, all mesh paths, on the interface identified
+ *	by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
+ *	%NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
+ *	regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
+ *	has a private regulatory domain, it will be returned. Otherwise, the
+ *	global regdomain will be returned.
+ *	A device will have a private regulatory domain if it uses the
+ *	regulatory_hint() API. Even when a private regdomain is used the channel
+ *	information will still be mended according to further hints from
+ *	the regulatory core to help with compliance. A dump version of this API
+ *	is now available which will returns the global regdomain as well as
+ *	all private regdomains of present wiphys (for those that have it).
+ *	If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
+ *	its private regdomain is the only valid one for it. The regulatory
+ *	core is not used to help with compliance in this case.
+ * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
+ *	after being queried by the kernel. CRDA replies by sending a regulatory
+ *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
+ *	current alpha2 if it found a match. It also provides
+ * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ * 	regulatory rule is a nested set of attributes  given by
+ * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
+ * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ * 	store this as a valid request and then query userspace for it.
+ *
+ * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
+ *	interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
+ *      interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
+ *	interface is identified with %NL80211_ATTR_IFINDEX and the management
+ *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
+ *	added to the end of the specified management frame is specified with
+ *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
+ *	added to all specified management frames generated by
+ *	kernel/firmware/driver.
+ *	Note: This command has been removed and it is only reserved at this
+ *	point to avoid re-using existing command number. The functionality this
+ *	command was planned for has been provided with cleaner design with the
+ *	option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
+ *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
+ *	NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
+ *
+ * @NL80211_CMD_GET_SCAN: get scan results
+ * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ *	probe requests at CCK rate or not.
+ * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
+ *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
+ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
+ *	partial scan results may be available
+ *
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
+ *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
+ *	are passed, they are used in the probe requests.  For
+ *	broadcast, a broadcast SSID must be passed (ie. an empty
+ *	string).  If no SSID is passed, no probe requests are sent and
+ *	a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
+ *	if passed, define which channels should be scanned; if not
+ *	passed, all channels allowed for the current regulatory domain
+ *	are used.  Extra IEs can also be passed from the userspace by
+ *	using the %NL80211_ATTR_IE attribute.  The first cycle of the
+ *	scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
+ *	is supplied.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
+ *	scheduled scan is not running. The caller may assume that as soon
+ *	as the call returns, it is safe to start a new scheduled scan again.
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ *	results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+ *	stopped.  The driver may issue this event at any time during a
+ *	scheduled scan.  One reason for stopping the scan is if the hardware
+ *	does not support starting an association or a normal scan while running
+ *	a scheduled scan.  This event is also sent when the
+ *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
+ *	is brought down while a scheduled scan was running.
+ *
+ * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ *      or noise level
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
+ *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
+ *
+ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
+ *	(for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
+ *	(for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
+ *
+ * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
+ * 	has been changed and provides details of the request information
+ * 	that caused the change such as who initiated the regulatory request
+ * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ * 	to (%NL80211_ATTR_REG_ALPHA2).
+ * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
+ * 	has been found while world roaming thus enabling active scan or
+ * 	any mode of operation that initiates TX (beacons) on a channel
+ * 	where we would not have been able to do either before. As an example
+ * 	if you are world roaming (regulatory domain set to world or if your
+ * 	driver is using a custom world roaming regulatory domain) and while
+ * 	doing a passive scan on the 5 GHz band you find an AP there (if not
+ * 	on a DFS channel) you will now be able to actively scan for that AP
+ * 	or use AP mode on your card on that same channel. Note that this will
+ * 	never be used for channels 1-11 on the 2 GHz band as they are always
+ * 	enabled world wide. This beacon hint is only sent if your device had
+ * 	either disabled active scanning or beaconing on a channel. We send to
+ * 	userspace the wiphy on which we removed a restriction from
+ * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ * 	the beacon hint was processed.
+ *
+ * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
+ *	This command is used both as a command (request to authenticate) and
+ *	as an event on the "mlme" multicast group indicating completion of the
+ *	authentication process.
+ *	When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
+ *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
+ *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
+ *	the SSID (mainly for association, but is included in authentication
+ *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
+ *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
+ *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
+ *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
+ *	to be added to the frame.
+ *	When used as an event, this reports reception of an Authentication
+ *	frame in station and IBSS modes when the local MLME processed the
+ *	frame, i.e., it was for the local STA and was received in correct
+ *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
+ *	MLME SAP interface (kernel providing MLME, userspace SME). The
+ *	included %NL80211_ATTR_FRAME attribute contains the management frame
+ *	(including both the header and frame body, but not FCS). This event is
+ *	also used to indicate if the authentication attempt timed out. In that
+ *	case the %NL80211_ATTR_FRAME attribute is replaced with a
+ *	%NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
+ *	pending authentication timed out).
+ * @NL80211_CMD_ASSOCIATE: association request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
+ *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
+ *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
+ *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
+ *	primitives).
+ * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
+ *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
+ *
+ * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
+ *	MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
+ *	event includes %NL80211_ATTR_MAC to describe the source MAC address of
+ *	the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
+ *	type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
+ *	%NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
+ *	event matches with MLME-MICHAELMICFAILURE.indication() primitive
+ *
+ * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
+ *	FREQ attribute (for the initial frequency if no peer can be found)
+ *	and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
+ *	should be fixed rather than automatically determined. Can only be
+ *	executed on a network interface that is UP, and fixed BSSID/FREQ
+ *	may be rejected. Another optional parameter is the beacon interval,
+ *	given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
+ *	given defaults to 100 TU (102.4ms).
+ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
+ *	determined by the network interface.
+ *
+ * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
+ *	to identify the device, and the TESTDATA blob attribute to pass through
+ *	to the driver.
+ *
+ * @NL80211_CMD_CONNECT: connection request and notification; this command
+ *	requests to connect to a specified network but without separating
+ *	auth and assoc steps. For this, you need to specify the SSID in a
+ *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
+ *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
+ *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and
+ *	%NL80211_ATTR_WIPHY_FREQ_HINT.
+ *	If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
+ *	restrictions on BSS selection, i.e., they effectively prevent roaming
+ *	within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT
+ *	can be included to provide a recommendation of the initial BSS while
+ *	allowing the driver to roam to other BSSes within the ESS and also to
+ *	ignore this recommendation if the indicated BSS is not ideal. Only one
+ *	set of BSSID,frequency parameters is used (i.e., either the enforcing
+ *	%NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
+ *	%NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
+ *	Background scan period can optionally be
+ *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
+ *	if not specified default background scan configuration
+ *	in driver is used and if period value is 0, bg scan will be disabled.
+ *	This attribute is ignored if driver does not support roam scan.
+ *	It is also sent as an event, with the BSSID and response IEs when the
+ *	connection is established or failed to be established. This can be
+ *	determined by the STATUS_CODE attribute.
+ * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+ *	sent as an event when the card/driver roamed by itself.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ *	userspace that a connection was dropped by the AP or due to other
+ *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+ *	%NL80211_ATTR_REASON_CODE attributes are used.
+ *
+ * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
+ *	associated with this wiphy must be down and will follow.
+ *
+ * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
+ *	channel for the specified amount of time. This can be used to do
+ *	off-channel operations like transmit a Public Action frame and wait for
+ *	a response while being associated to an AP on another channel.
+ *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
+ *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ *	frequency for the operation.
+ *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+ *	to remain on the channel. This command is also used as an event to
+ *	notify when the requested duration starts (it may take a while for the
+ *	driver to schedule this time due to other concurrent needs for the
+ *	radio).
+ *	When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
+ *	that will be included with any events pertaining to this request;
+ *	the cookie is also used to cancel the request.
+ * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
+ *	pending remain-on-channel duration if the desired operation has been
+ *	completed prior to expiration of the originally requested duration.
+ *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
+ *	radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
+ *	uniquely identify the request.
+ *	This command is also used as an event to notify when a requested
+ *	remain-on-channel duration has expired.
+ *
+ * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
+ *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
+ *	and @NL80211_ATTR_TX_RATES the set of allowed rates.
+ *
+ * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
+ *	(via @NL80211_CMD_FRAME) for processing in userspace. This command
+ *	requires an interface index, a frame type attribute (optional for
+ *	backward compatibility reasons, if not given assumes action frames)
+ *	and a match attribute containing the first few bytes of the frame
+ *	that should match, e.g. a single byte for only a category match or
+ *	four bytes for vendor frames including the OUI. The registration
+ *	cannot be dropped, but is removed automatically when the netlink
+ *	socket is closed. Multiple registrations can be made.
+ * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
+ *	backward compatibility
+ * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
+ *	command is used both as a request to transmit a management frame and
+ *	as an event indicating reception of a frame that was not processed in
+ *	kernel code, but is for us (i.e., which may need to be processed in a
+ *	user space application). %NL80211_ATTR_FRAME is used to specify the
+ *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used
+ *	to indicate on which channel the frame is to be transmitted or was
+ *	received. If this channel is not the current channel (remain-on-channel
+ *	or the operational channel) the device will switch to the given channel
+ *	and transmit the frame, optionally waiting for a response for the time
+ *	specified using %NL80211_ATTR_DURATION. When called, this operation
+ *	returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
+ *	TX status event pertaining to the TX request.
+ *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ *	management frames at CCK rate or not in 2GHz band.
+ *	%NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA
+ *	counters which will be updated to the current value. This attribute
+ *	is used during CSA period.
+ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
+ *	command may be used with the corresponding cookie to cancel the wait
+ *	time if it is known that it is no longer necessary.
+ * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
+ * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
+ *	transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
+ *	the TX command and %NL80211_ATTR_FRAME includes the contents of the
+ *	frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
+ *	the frame.
+ * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
+ *	backward compatibility.
+ *
+ * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
+ * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
+ *
+ * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
+ *	is used to configure connection quality monitoring notification trigger
+ *	levels.
+ * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
+ *	command is used as an event to indicate the that a trigger level was
+ *	reached.
+ * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
+ *	and the attributes determining channel width) the given interface
+ *	(identifed by %NL80211_ATTR_IFINDEX) shall operate on.
+ *	In case multiple channels are supported by the device, the mechanism
+ *	with which it switches channels is implementation-defined.
+ *	When a monitor interface is given, it can only switch channel while
+ *	no other interfaces are operating to avoid disturbing the operation
+ *	of any other interfaces, and other interfaces will again take
+ *	precedence when they are used.
+ *
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
+ *
+ * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
+ *	mesh config parameters may be given.
+ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
+ *	network is determined by the network interface.
+ *
+ * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
+ *	notification. This event is used to indicate that an unprotected
+ *	deauthentication frame was dropped when MFP is in use.
+ * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
+ *	notification. This event is used to indicate that an unprotected
+ *	disassociation frame was dropped when MFP is in use.
+ *
+ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
+ *      beacon or probe response from a compatible mesh peer.  This is only
+ *      sent while no station information (sta_info) exists for the new peer
+ *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH,
+ *      @NL80211_MESH_SETUP_USERSPACE_AMPE, or
+ *      @NL80211_MESH_SETUP_USERSPACE_MPM is set.  On reception of this
+ *      notification, userspace may decide to create a new station
+ *      (@NL80211_CMD_NEW_STATION).  To stop this notification from
+ *      reoccurring, the userspace authentication daemon may want to create the
+ *      new station with the AUTHENTICATED flag unset and maybe change it later
+ *      depending on the authentication result.
+ *
+ * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
+ * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
+ *	Since wireless is more complex than wired ethernet, it supports
+ *	various triggers. These triggers can be configured through this
+ *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
+ *	more background information, see
+ *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *	The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
+ *	from the driver reporting the wakeup reason. In this case, the
+ *	@NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
+ *	for the wakeup, if it was caused by wireless. If it is not present
+ *	in the wakeup notification, the wireless device didn't cause the
+ *	wakeup but reports that it was woken up.
+ *
+ * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
+ *	the necessary information for supporting GTK rekey offload. This
+ *	feature is typically used during WoWLAN. The configuration data
+ *	is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
+ *	contains the data in sub-attributes). After rekeying happened,
+ *	this command may also be sent by the driver as an MLME event to
+ *	inform userspace of the new replay counter.
+ *
+ * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
+ *	of PMKSA caching dandidates.
+ *
+ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ *	In addition, this can be used as an event to request userspace to take
+ *	actions on TDLS links (set up a new link or tear down an existing one).
+ *	In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested
+ *	operation, %NL80211_ATTR_MAC contains the peer MAC address, and
+ *	%NL80211_ATTR_REASON_CODE the reason code to be used (only with
+ *	%NL80211_TDLS_TEARDOWN).
+ * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The
+ *	%NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be
+ *	sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as
+ *	802.11 management frames, while TDLS action codes (802.11-2012
+ *	8.5.13.1) will be encapsulated and sent as data frames. The currently
+ *	supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES
+ *	and the currently supported TDLS actions codes are given in
+ *	&enum ieee80211_tdls_actioncode.
+ *
+ * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
+ *	(or GO) interface (i.e. hostapd) to ask for unexpected frames to
+ *	implement sending deauth to stations that send unexpected class 3
+ *	frames. Also used as the event sent by the kernel when such a frame
+ *	is received.
+ *	For the event, the %NL80211_ATTR_MAC attribute carries the TA and
+ *	other attributes like the interface index are present.
+ *	If used as the command it must have an interface index and you can
+ *	only unsubscribe from the event by closing the socket. Subscription
+ *	is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
+ *
+ * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
+ *	associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
+ *	and wasn't already in a 4-addr VLAN. The event will be sent similarly
+ *	to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
+ *
+ * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
+ *	by sending a null data frame to it and reporting when the frame is
+ *	acknowleged. This is used to allow timing out inactive clients. Uses
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
+ *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
+ *	up the event with the request. The event includes the same data and
+ *	has %NL80211_ATTR_ACK set if the frame was ACKed.
+ *
+ * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
+ *	other BSSes when any interfaces are in AP mode. This helps implement
+ *	OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
+ *	messages. Note that per PHY only one application may register.
+ *
+ * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
+ *      No Acknowledgement Policy should be applied.
+ *
+ * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
+ *	independently of the userspace SME, send this event indicating
+ *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
+ *	attributes determining channel width.  This indication may also be
+ *	sent when a remotely-initiated switch (e.g., when a STA receives a CSA
+ *	from the remote AP) is completed;
+ *
+ * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch
+ *	has been started on an interface, regardless of the initiator
+ *	(ie. whether it was requested from a remote device or
+ *	initiated on our own).  It indicates that
+ *	%NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ
+ *	after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's.  The userspace may
+ *	decide to react to this indication by requesting other
+ *	interfaces to change channel as well.
+ *
+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
+ *	its %NL80211_ATTR_WDEV identifier. It must have been created with
+ *	%NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
+ *	P2P Device can be used for P2P operations, e.g. remain-on-channel and
+ *	public action frame TX.
+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
+ *	its %NL80211_ATTR_WDEV identifier.
+ *
+ * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to
+ *	notify userspace that AP has rejected the connection request from a
+ *	station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
+ *	is used for this.
+ *
+ * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
+ *	for IBSS or MESH vif.
+ *
+ * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
+ *	This is to be used with the drivers advertising the support of MAC
+ *	address based access control. List of MAC addresses is passed in
+ *	%NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
+ *	%NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
+ *	is not already done. The new list will replace any existing list. Driver
+ *	will clear its ACL when the list of MAC addresses passed is empty. This
+ *	command is used in AP/P2P GO mode. Driver has to make sure to clear its
+ *	ACL list during %NL80211_CMD_STOP_AP.
+ *
+ * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once
+ *	a radar is detected or the channel availability scan (CAC) has finished
+ *	or was aborted, or a radar was detected, usermode will be notified with
+ *	this event. This command is also used to notify userspace about radars
+ *	while operating on this channel.
+ *	%NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
+ *	event.
+ *
+ * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features,
+ *	i.e. features for the nl80211 protocol rather than device features.
+ *	Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap.
+ *
+ * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition
+ *	Information Element to the WLAN driver
+ *
+ * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver
+ *	to the supplicant. This will carry the target AP's MAC address along
+ *	with the relevant Information Elements. This event is used to report
+ *	received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).
+ *
+ * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running
+ *	a critical protocol that needs more reliability in the connection to
+ *	complete.
+ *
+ * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can
+ *	return back to normal.
+ *
+ * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules.
+ * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules.
+ *
+ * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the
+ *	the new channel information (Channel Switch Announcement - CSA)
+ *	in the beacon for some time (as defined in the
+ *	%NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the
+ *	new channel. Userspace provides the new channel information (using
+ *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel
+ *	width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform
+ *	other station that transmission must be blocked until the channel
+ *	switch is complete.
+ *
+ * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified
+ *	by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in
+ *	%NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in
+ *	%NL80211_ATTR_VENDOR_DATA.
+ *	For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is
+ *	used in the wiphy data as a nested attribute containing descriptions
+ *	(&struct nl80211_vendor_cmd_info) of the supported vendor commands.
+ *	This may also be sent as an event with the same attributes.
+ *
+ * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values.
+ *	The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If
+ *	that attribute is not included, QoS mapping is disabled. Since this
+ *	QoS mapping is relevant for IP packets, it is only valid during an
+ *	association. This is cleared on disassociation and AP restart.
+ *
+ * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given
+ *	%NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO
+ *	and %NL80211_ATTR_ADMITTED_TIME parameters.
+ *	Note that the action frame handshake with the AP shall be handled by
+ *	userspace via the normal management RX/TX framework, this only sets
+ *	up the TX TS in the driver/device.
+ *	If the admitted time attribute is not added then the request just checks
+ *	if a subsequent setup could be successful, the intent is to use this to
+ *	avoid setting up a session with the AP when local restrictions would
+ *	make that impossible. However, the subsequent "real" setup may still
+ *	fail even if the check was successful.
+ * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID
+ *	and %NL80211_ATTR_MAC parameters. It isn't necessary to call this
+ *	before removing a station entry entirely, or before disassociating
+ *	or similar, cleanup will happen in the driver/device in this case.
+ *
+ * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
+ *	bandwidth of a channel must be given.
+ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
+ *	network is determined by the network interface.
+ *
+ * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,
+ *	identified by the %NL80211_ATTR_MAC parameter. A target channel is
+ *	provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining
+ *	channel width/type. The target operating class is given via
+ *	%NL80211_ATTR_OPER_CLASS.
+ *	The driver is responsible for continually initiating channel-switching
+ *	operations and returning to the base channel for communication with the
+ *	AP.
+ * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS
+ *	peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
+ *	when this command completes.
+ *
+ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
+ *	as an event to indicate changes for devices with wiphy-specific regdom
+ *	management.
+ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+enum nl80211_commands {
+/* don't change the order or add anything between, this is ABI! */
+	NL80211_CMD_UNSPEC,
+
+	NL80211_CMD_GET_WIPHY,		/* can dump */
+	NL80211_CMD_SET_WIPHY,
+	NL80211_CMD_NEW_WIPHY,
+	NL80211_CMD_DEL_WIPHY,
+
+	NL80211_CMD_GET_INTERFACE,	/* can dump */
+	NL80211_CMD_SET_INTERFACE,
+	NL80211_CMD_NEW_INTERFACE,
+	NL80211_CMD_DEL_INTERFACE,
+
+	NL80211_CMD_GET_KEY,
+	NL80211_CMD_SET_KEY,
+	NL80211_CMD_NEW_KEY,
+	NL80211_CMD_DEL_KEY,
+
+	NL80211_CMD_GET_BEACON,
+	NL80211_CMD_SET_BEACON,
+	NL80211_CMD_START_AP,
+	NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
+	NL80211_CMD_STOP_AP,
+	NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
+
+	NL80211_CMD_GET_STATION,
+	NL80211_CMD_SET_STATION,
+	NL80211_CMD_NEW_STATION,
+	NL80211_CMD_DEL_STATION,
+
+	NL80211_CMD_GET_MPATH,
+	NL80211_CMD_SET_MPATH,
+	NL80211_CMD_NEW_MPATH,
+	NL80211_CMD_DEL_MPATH,
+
+	NL80211_CMD_SET_BSS,
+
+	NL80211_CMD_SET_REG,
+	NL80211_CMD_REQ_SET_REG,
+
+	NL80211_CMD_GET_MESH_CONFIG,
+	NL80211_CMD_SET_MESH_CONFIG,
+
+	NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
+
+	NL80211_CMD_GET_REG,
+
+	NL80211_CMD_GET_SCAN,
+	NL80211_CMD_TRIGGER_SCAN,
+	NL80211_CMD_NEW_SCAN_RESULTS,
+	NL80211_CMD_SCAN_ABORTED,
+
+	NL80211_CMD_REG_CHANGE,
+
+	NL80211_CMD_AUTHENTICATE,
+	NL80211_CMD_ASSOCIATE,
+	NL80211_CMD_DEAUTHENTICATE,
+	NL80211_CMD_DISASSOCIATE,
+
+	NL80211_CMD_MICHAEL_MIC_FAILURE,
+
+	NL80211_CMD_REG_BEACON_HINT,
+
+	NL80211_CMD_JOIN_IBSS,
+	NL80211_CMD_LEAVE_IBSS,
+
+	NL80211_CMD_TESTMODE,
+
+	NL80211_CMD_CONNECT,
+	NL80211_CMD_ROAM,
+	NL80211_CMD_DISCONNECT,
+
+	NL80211_CMD_SET_WIPHY_NETNS,
+
+	NL80211_CMD_GET_SURVEY,
+	NL80211_CMD_NEW_SURVEY_RESULTS,
+
+	NL80211_CMD_SET_PMKSA,
+	NL80211_CMD_DEL_PMKSA,
+	NL80211_CMD_FLUSH_PMKSA,
+
+	NL80211_CMD_REMAIN_ON_CHANNEL,
+	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
+
+	NL80211_CMD_SET_TX_BITRATE_MASK,
+
+	NL80211_CMD_REGISTER_FRAME,
+	NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
+	NL80211_CMD_FRAME,
+	NL80211_CMD_ACTION = NL80211_CMD_FRAME,
+	NL80211_CMD_FRAME_TX_STATUS,
+	NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
+
+	NL80211_CMD_SET_POWER_SAVE,
+	NL80211_CMD_GET_POWER_SAVE,
+
+	NL80211_CMD_SET_CQM,
+	NL80211_CMD_NOTIFY_CQM,
+
+	NL80211_CMD_SET_CHANNEL,
+	NL80211_CMD_SET_WDS_PEER,
+
+	NL80211_CMD_FRAME_WAIT_CANCEL,
+
+	NL80211_CMD_JOIN_MESH,
+	NL80211_CMD_LEAVE_MESH,
+
+	NL80211_CMD_UNPROT_DEAUTHENTICATE,
+	NL80211_CMD_UNPROT_DISASSOCIATE,
+
+	NL80211_CMD_NEW_PEER_CANDIDATE,
+
+	NL80211_CMD_GET_WOWLAN,
+	NL80211_CMD_SET_WOWLAN,
+
+	NL80211_CMD_START_SCHED_SCAN,
+	NL80211_CMD_STOP_SCHED_SCAN,
+	NL80211_CMD_SCHED_SCAN_RESULTS,
+	NL80211_CMD_SCHED_SCAN_STOPPED,
+
+	NL80211_CMD_SET_REKEY_OFFLOAD,
+
+	NL80211_CMD_PMKSA_CANDIDATE,
+
+	NL80211_CMD_TDLS_OPER,
+	NL80211_CMD_TDLS_MGMT,
+
+	NL80211_CMD_UNEXPECTED_FRAME,
+
+	NL80211_CMD_PROBE_CLIENT,
+
+	NL80211_CMD_REGISTER_BEACONS,
+
+	NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
+
+	NL80211_CMD_SET_NOACK_MAP,
+
+	NL80211_CMD_CH_SWITCH_NOTIFY,
+
+	NL80211_CMD_START_P2P_DEVICE,
+	NL80211_CMD_STOP_P2P_DEVICE,
+
+	NL80211_CMD_CONN_FAILED,
+
+	NL80211_CMD_SET_MCAST_RATE,
+
+	NL80211_CMD_SET_MAC_ACL,
+
+	NL80211_CMD_RADAR_DETECT,
+
+	NL80211_CMD_GET_PROTOCOL_FEATURES,
+
+	NL80211_CMD_UPDATE_FT_IES,
+	NL80211_CMD_FT_EVENT,
+
+	NL80211_CMD_CRIT_PROTOCOL_START,
+	NL80211_CMD_CRIT_PROTOCOL_STOP,
+
+	NL80211_CMD_GET_COALESCE,
+	NL80211_CMD_SET_COALESCE,
+
+	NL80211_CMD_CHANNEL_SWITCH,
+
+	NL80211_CMD_VENDOR,
+
+	NL80211_CMD_SET_QOS_MAP,
+
+	NL80211_CMD_ADD_TX_TS,
+	NL80211_CMD_DEL_TX_TS,
+
+	NL80211_CMD_GET_MPP,
+
+	NL80211_CMD_JOIN_OCB,
+	NL80211_CMD_LEAVE_OCB,
+
+	NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,
+
+	NL80211_CMD_TDLS_CHANNEL_SWITCH,
+	NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
+
+	NL80211_CMD_WIPHY_REG_CHANGE,
+
+	/* add new commands above here */
+
+	/* used to define NL80211_CMD_MAX below */
+	__NL80211_CMD_AFTER_LAST,
+	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
+};
+
+/*
+ * Allow user space programs to use #ifdef on new commands by defining them
+ * here
+ */
+#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
+#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
+#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
+#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
+#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
+#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
+#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
+#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
+
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
+/* source-level API compatibility */
+#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
+#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
+#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
+
+/**
+ * enum nl80211_attrs - nl80211 netlink attributes
+ *
+ * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
+ *
+ * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
+ *	/sys/class/ieee80211/<phyname>/index
+ * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz,
+ *	defines the channel together with the (deprecated)
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
+ *	%NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1
+ *	and %NL80211_ATTR_CENTER_FREQ2
+ * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
+ *	of &enum nl80211_chan_width, describing the channel width. See the
+ *	documentation of the enum for more information.
+ * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
+ *	channel, used for anything but 20 MHz bandwidth
+ * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
+ *	channel, used only for 80+80 MHz bandwidth
+ * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
+ *	if HT20 or HT40 are to be used (i.e., HT disabled if not included):
+ *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
+ *		this attribute)
+ *	NL80211_CHAN_HT20 = HT20 only
+ *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
+ *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
+ *	This attribute is now deprecated.
+ * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
+ *	less than or equal to the RTS threshold; allowed range: 1..255;
+ *	dot11ShortRetryLimit; u8
+ * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
+ *	greater than the RTS threshold; allowed range: 1..255;
+ *	dot11ShortLongLimit; u8
+ * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
+ *	length in octets for frames; allowed range: 256..8000, disable
+ *	fragmentation with (u32)-1; dot11FragmentationThreshold; u32
+ * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
+ *	larger than or equal to this use RTS/CTS handshake); allowed range:
+ *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
+ * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
+ *	section 7.3.2.9; dot11CoverageClass; u8
+ *
+ * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
+ * @NL80211_ATTR_IFNAME: network interface name
+ * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
+ *
+ * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices
+ *	that don't have a netdev (u64)
+ *
+ * @NL80211_ATTR_MAC: MAC address (various uses)
+ *
+ * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
+ *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ *	keys
+ * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ *	section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ *	CCMP keys, each six bytes in little endian
+ * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
+ * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
+ *	default management key
+ * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
+ *	other commands, indicates which pairwise cipher suites are used
+ * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
+ *	other commands, indicates which group cipher suite is used
+ *
+ * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
+ * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
+ * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
+ * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
+ *
+ * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
+ * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
+ *	&enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
+ * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
+ *	IEEE 802.11 7.3.1.6 (u16).
+ * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
+ *	rates as defined by IEEE 802.11 7.3.2.2 but without the length
+ *	restriction (at most %NL80211_MAX_SUPP_RATES).
+ * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
+ *	to, or the AP interface the station was originally added to to.
+ * @NL80211_ATTR_STA_INFO: information about a station, part of station info
+ *	given for %NL80211_CMD_GET_STATION, nested attribute containing
+ *	info as possible, see &enum nl80211_sta_info.
+ *
+ * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
+ *	consisting of a nested array.
+ *
+ * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link
+ *	(see &enum nl80211_plink_action).
+ * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
+ * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
+ * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ *	&enum nl80211_mpath_info.
+ *
+ * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
+ *      &enum nl80211_mntr_flags.
+ *
+ * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
+ * 	current regulatory domain should be set to or is already set to.
+ * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ * 	to query the CRDA to retrieve one regulatory domain. This attribute can
+ * 	also be used by userspace to query the kernel for the currently set
+ * 	regulatory domain. We chose an alpha2 as that is also used by the
+ * 	IEEE-802.11 country information element to identify a country.
+ * 	Users can also simply ask the wireless core to set regulatory domain
+ * 	to a specific alpha2.
+ * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
+ *	rules.
+ *
+ * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
+ *	(u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
+ *	(u8, 0 or 1)
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
+ *	rates in format defined by IEEE 802.11 7.3.2.2 but without the length
+ *	restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION)
+ *
+ * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
+ *	supported interface types, each a flag attribute with the number
+ *	of the interface mode.
+ *
+ * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE.
+ *
+ * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE).
+ *
+ * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
+ *	a single scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
+ *	scan with a single scheduled scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
+ *	that can be added to a scan request
+ * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
+ *	elements that can be added to a scheduled scan request
+ * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
+ *	used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
+ *
+ * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
+ * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
+ *	scanning and include a zero-length SSID (wildcard) for wildcard scan
+ * @NL80211_ATTR_BSS: scan result BSS
+ *
+ * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
+ * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
+ * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *
+ * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
+ *	an array of command numbers (i.e. a mapping index to command number)
+ *	that the driver for the given wiphy supports.
+ *
+ * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
+ *	and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
+ *	NL80211_CMD_ASSOCIATE events
+ * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
+ * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
+ *	represented as a u32
+ * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
+ *	%NL80211_CMD_DISASSOCIATE, u16
+ *
+ * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
+ *	a u32
+ *
+ * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
+ * 	due to considerations from a beacon hint. This attribute reflects
+ * 	the state of the channel _before_ the beacon hint processing. This
+ * 	attributes consists of a nested attribute containing
+ * 	NL80211_FREQUENCY_ATTR_*
+ * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
+ * 	due to considerations from a beacon hint. This attribute reflects
+ * 	the state of the channel _after_ the beacon hint processing. This
+ * 	attributes consists of a nested attribute containing
+ * 	NL80211_FREQUENCY_ATTR_*
+ *
+ * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
+ *	cipher suites
+ *
+ * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
+ *	for other networks on different channels
+ *
+ * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
+ *	is used, e.g., with %NL80211_CMD_AUTHENTICATE event
+ *
+ * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
+ *	used for the association (&enum nl80211_mfp, represented as a u32);
+ *	this attribute can be used
+ *	with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests
+ *
+ * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
+ *	&struct nl80211_sta_flag_update.
+ *
+ * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
+ *	IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
+ *	station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
+ *	request, the driver will assume that the port is unauthorized until
+ *	authorized by user space. Otherwise, port is marked authorized by
+ *	default in station mode.
+ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
+ *	ethertype that will be used for key negotiation. It can be
+ *	specified with the associate and connect commands. If it is not
+ *	specified, the value defaults to 0x888E (PAE, 802.1X). This
+ *	attribute is also used as a flag in the wiphy information to
+ *	indicate that protocols other than PAE are supported.
+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
+ *	ethertype frames used for key negotiation must not be encrypted.
+ *
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+ *	We recommend using nested, driver-specific attributes within this.
+ *
+ * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
+ *	event was due to the AP disconnecting the station, and not due to
+ *	a local disconnect request.
+ * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
+ *	event (u16)
+ * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
+ *	that protected APs should be used. This is also used with NEW_BEACON to
+ *	indicate that the BSS is to use protection.
+ *
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
+ *	to indicate which unicast key ciphers will be used with the connection
+ *	(an array of u32).
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which group key cipher will be used with the connection (a
+ *	u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which WPA version(s) the AP we want to associate with is using
+ *	(a u32 with flags from &enum nl80211_wpa_versions).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which key management algorithm(s) to use (an array of u32).
+ *
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
+ *	sent out by the card, for ROAM and successful CONNECT events.
+ * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
+ *	sent by peer, for ROAM and successful CONNECT events.
+ *
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
+ *	commands to specify using a reassociate frame
+ *
+ * @NL80211_ATTR_KEY: key information in a nested attribute with
+ *	%NL80211_KEY_* sub-attributes
+ * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
+ *	and join_ibss(), key information is in a nested attribute each
+ *	with %NL80211_KEY_* sub-attributes
+ *
+ * @NL80211_ATTR_PID: Process ID of a network namespace.
+ *
+ * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
+ *	dumps. This number increases whenever the object list being
+ *	dumped changes, and as such userspace can verify that it has
+ *	obtained a complete and consistent snapshot by verifying that
+ *	all dump messages contain the same generation number. If it
+ *	changed then the list changed and the dump should be repeated
+ *	completely from scratch.
+ *
+ * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
+ *
+ * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
+ *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
+ *      containing info as possible, see &enum survey_info.
+ *
+ * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
+ * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
+ *	cache, a wiphy attribute.
+ *
+ * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
+ * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
+ *	specifies the maximum duration that can be requested with the
+ *	remain-on-channel operation, in milliseconds, u32.
+ *
+ * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
+ *
+ * @NL80211_ATTR_TX_RATES: Nested set of attributes
+ *	(enum nl80211_tx_rate_attributes) describing TX rates per band. The
+ *	enum nl80211_band value is used as the index (nla_type() of the nested
+ *	data. If a band is not included, it will be configured to allow all
+ *	rates based on negotiated supported rates information. This attribute
+ *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
+ *
+ * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+ *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+ * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
+ *	@NL80211_CMD_REGISTER_FRAME command.
+ * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ *	information about which frame types can be transmitted with
+ *	%NL80211_CMD_FRAME.
+ * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ *	information about which frame types can be registered for RX.
+ *
+ * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
+ *	acknowledged by the recipient.
+ *
+ * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
+ *
+ * @NL80211_ATTR_CQM: connection quality monitor configuration in a
+ *	nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
+ *
+ * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
+ *	is requesting a local authentication/association state change without
+ *	invoking actual management frame exchange. This can be used with
+ *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
+ *	NL80211_CMD_DISASSOCIATE.
+ *
+ * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
+ *	connected to this BSS.
+ *
+ * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
+ *      &enum nl80211_tx_power_setting for possible values.
+ * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
+ *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
+ *      for non-automatic settings.
+ *
+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
+ *	means support for per-station GTKs.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for transmitting. If an antenna is not selected in this
+ *	bitmap the hardware is not allowed to transmit on this antenna.
+ *
+ *	Each bit represents one antenna, starting with antenna 1 at the first
+ *	bit. Depending on which antennas are selected in the bitmap, 802.11n
+ *	drivers can derive which chainmasks to use (if all antennas belonging to
+ *	a particular chain are disabled this chain should be disabled) and if
+ *	a chain has diversity antennas wether diversity should be used or not.
+ *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
+ *	derived from the available chains after applying the antenna mask.
+ *	Non-802.11n drivers can derive wether to use diversity or not.
+ *	Drivers may reject configurations or RX/TX mask combinations they cannot
+ *	support by returning -EINVAL.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for receiving. If an antenna is not selected in this bitmap
+ *	the hardware should not be configured to receive on this antenna.
+ *	For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
+ *	for configuration as TX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
+ *	for configuration as RX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
+ *
+ * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
+ *	transmitted on another channel when the channel given doesn't match
+ *	the current channel. If the current channel doesn't match and this
+ *	flag isn't set, the frame will be rejected. This is also used as an
+ *	nl80211 capability flag.
+ *
+ * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
+ *
+ * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ *	attributes, specifying what a key should be set as default as.
+ *	See &enum nl80211_key_default_types.
+ *
+ * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
+ *	changed once the mesh is active.
+ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
+ *	containing attributes from &enum nl80211_meshconf_params.
+ * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
+ *	allows auth frames in a mesh to be passed to userspace for processing via
+ *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in
+ *	&enum nl80211_plink_state. Used when userspace is driving the peer link
+ *	management state machine.  @NL80211_MESH_SETUP_USERSPACE_AMPE or
+ *	@NL80211_MESH_SETUP_USERSPACE_MPM must be enabled.
+ *
+ * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
+ *	capabilities, the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
+ *	indicate which WoW triggers should be enabled. This is also
+ *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
+ *	triggers.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
+ *	cycles, in msecs.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
+ *	sets of attributes to match during scheduled scans.  Only BSSs
+ *	that match any of the sets will be reported.  These are
+ *	pass-thru filter rules.
+ *	For a match to succeed, the BSS must match all attributes of a
+ *	set.  Since not every hardware supports matching all types of
+ *	attributes, there is no guarantee that the reported BSSs are
+ *	fully complying with the match sets and userspace needs to be
+ *	able to ignore them by itself.
+ *	Thus, the implementation is somewhat hardware-dependent, but
+ *	this is only an optimization and the userspace application
+ *	needs to handle all the non-filtered results anyway.
+ *	If the match attributes don't make sense when combined with
+ *	the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
+ *	is included in the probe request, but the match attributes
+ *	will never let it go through), -EINVAL may be returned.
+ *	If ommited, no filtering is done.
+ *
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
+ *	interface combinations. In each nested item, it contains attributes
+ *	defined in &enum nl80211_if_combination_attrs.
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
+ *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
+ *	are managed in software: interfaces of these types aren't subject to
+ *	any restrictions in their number or combinations.
+ *
+ * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
+ *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
+ *
+ * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
+ *	nested array attribute containing an entry for each band, with the entry
+ *	being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
+ *	without the length restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
+ *	and Probe Response (when response to wildcard Probe Request); see
+ *	&enum nl80211_hidden_ssid, represented as a u32
+ *
+ * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
+ *	This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
+ *	provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
+ *	driver (or firmware) replies to Probe Request frames.
+ * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
+ *	Response frames. This is used with %NL80211_CMD_NEW_BEACON and
+ *	%NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
+ *	(Re)Association Response frames when the driver (or firmware) replies to
+ *	(Re)Association Request frames.
+ *
+ * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
+ *	of the station, see &enum nl80211_sta_wme_attr.
+ * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
+ *	as AP.
+ *
+ * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
+ *	roaming to another AP in the same ESS if the signal lever is low.
+ *
+ * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
+ *	candidate information, see &enum nl80211_pmksa_candidate_attr.
+ *
+ * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
+ *	for management frames transmission. In order to avoid p2p probe/action
+ *	frames are being transmitted at CCK rate in 2GHz band, the user space
+ *	applications use this attribute.
+ *	This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
+ *	%NL80211_CMD_FRAME commands.
+ *
+ * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
+ *	request, link setup confirm, link teardown, etc.). Values are
+ *	described in the TDLS (802.11z) specification.
+ * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
+ *	TDLS conversation between two devices.
+ * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
+ *	&enum nl80211_tdls_operation, represented as a u8.
+ * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
+ *	as a TDLS peer sta.
+ * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
+ *	procedures should be performed by sending TDLS packets via
+ *	%NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
+ *	used for asking the driver to perform a TDLS operation.
+ *
+ * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
+ *	that have AP support to indicate that they have the AP SME integrated
+ *	with support for the features listed in this attribute, see
+ *	&enum nl80211_ap_sme_features.
+ *
+ * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
+ *	the driver to not wait for an acknowledgement. Note that due to this,
+ *	it will also not give a status callback nor return a cookie. This is
+ *	mostly useful for probe responses to save airtime.
+ *
+ * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
+ *	&enum nl80211_feature_flags and is advertised in wiphy information.
+ * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
+ *	requests while operating in AP-mode.
+ *	This attribute holds a bitmap of the supported protocols for
+ *	offloading (see &enum nl80211_probe_resp_offload_support_attr).
+ *
+ * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+ *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+ *	to be filled by the FW.
+ * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
+ *      this feature.  Currently, only supported in mac80211 drivers.
+ * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+ *      ATTR_HT_CAPABILITY to which attention should be paid.
+ *      Currently, only mac80211 NICs support this feature.
+ *      The values that may be configured are:
+ *       MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
+ *       AMPDU density and AMPDU factor.
+ *      All values are treated as suggestions and may be ignored
+ *      by the driver as required.  The actual values may be seen in
+ *      the station debugfs ht_caps file.
+ *
+ * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
+ *    abides to when initiating radiation on DFS channels. A country maps
+ *    to one DFS region.
+ *
+ * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
+ *      up to 16 TIDs.
+ *
+ * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
+ *	used by the drivers which has MLME in firmware and does not have support
+ *	to report per station tx/rx activity to free up the staion entry from
+ *	the list. This needs to be used when the driver advertises the
+ *	capability to timeout the stations.
+ *
+ * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
+ *	this attribute is (depending on the driver capabilities) added to
+ *	received frames indicated with %NL80211_CMD_FRAME.
+ *
+ * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
+ *      or 0 to disable background scan.
+ *
+ * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from
+ *	userspace. If unset it is assumed the hint comes directly from
+ *	a user. If set code could specify exactly what type of source
+ *	was used to provide the hint. For the different types of
+ *	allowed user regulatory hints see nl80211_user_reg_hint_type.
+ *
+ * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected
+ *	the connection request from a station. nl80211_connect_failed_reason
+ *	enum has different reasons of connection failure.
+ *
+ * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
+ *	with the Authentication transaction sequence number field.
+ *
+ * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION)
+ *
+ * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32)
+ *
+ * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with
+ *	the START_AP and SET_BSS commands
+ * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the
+ *	START_AP and SET_BSS commands. This can have the values 0 or 1;
+ *	if not given in START_AP 0 is assumed, if not given in SET_BSS
+ *	no change is made.
+ *
+ * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
+ *	defined in &enum nl80211_mesh_power_mode.
+ *
+ * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
+ *	carried in a u32 attribute
+ *
+ * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
+ *	MAC ACL.
+ *
+ * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
+ *	number of MAC addresses that a device can support for MAC
+ *	ACL.
+ *
+ * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace,
+ *	contains a value of enum nl80211_radar_event (u32).
+ *
+ * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver
+ *	has and handles. The format is the same as the IE contents. See
+ *	802.11-2012 8.4.2.29 for more information.
+ * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver
+ *	has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields.
+ *
+ * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to
+ *	the driver, e.g., to enable TDLS power save (PU-APSD).
+ *
+ * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are
+ *	advertised to the driver, e.g., to enable TDLS off channel operations
+ *	and PU-APSD.
+ *
+ * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see
+ *	&enum nl80211_protocol_features, the attribute is a u32.
+ *
+ * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
+ *	receiving the data for a single wiphy split across multiple
+ *	messages, given with wiphy dump message
+ *
+ * @NL80211_ATTR_MDID: Mobility Domain Identifier
+ *
+ * @NL80211_ATTR_IE_RIC: Resource Information Container Information
+ *	Element
+ *
+ * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased
+ *	reliability, see &enum nl80211_crit_proto_id (u16).
+ * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
+ *      the connection should have increased reliability (u16).
+ *
+ * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
+ *	This is similar to @NL80211_ATTR_STA_AID but with a difference of being
+ *	allowed to be used with the first @NL80211_CMD_SET_STATION command to
+ *	update a TDLS peer STA entry.
+ *
+ * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information.
+ *
+ * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
+ *	until the channel switch event.
+ * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
+ *	must be blocked on the current channel (before the channel switch
+ *	operation).
+ * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+ *	for the time while performing a channel switch.
+ * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
+ *	switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+ * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
+ *	switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
+ *
+ * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
+ *	As specified in the &enum nl80211_rxmgmt_flags.
+ *
+ * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels.
+ *
+ * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported
+ *      supported operating classes.
+ *
+ * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space
+ *	controls DFS operation in IBSS mode. If the flag is included in
+ *	%NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS
+ *	channels and reports radar events to userspace. Userspace is required
+ *	to react to radar events, e.g. initiate a channel switch or leave the
+ *	IBSS network.
+ *
+ * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports
+ *	5 MHz channel bandwidth.
+ * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports
+ *	10 MHz channel bandwidth.
+ *
+ * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
+ *	Notification Element based on association request when used with
+ *	%NL80211_CMD_NEW_STATION; u8 attribute.
+ *
+ * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
+ *	%NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
+ * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command
+ * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this
+ *	attribute is also used for vendor command feature advertisement
+ * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy
+ *	info, containing a nested array of possible events
+ *
+ * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This
+ *	data is in the format defined for the payload of the QoS Map Set element
+ *	in IEEE Std 802.11-2012, 8.4.2.97.
+ *
+ * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS
+ * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS
+ *
+ * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
+ *	associated stations are supported in AP mode (including P2P GO); u32.
+ *	Since drivers may not have a fixed limit on the maximum number (e.g.,
+ *	other concurrent operations may affect this), drivers are allowed to
+ *	advertise values that cannot always be met. In such cases, an attempt
+ *	to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
+ *
+ * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which
+ *	should be updated when the frame is transmitted.
+ * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
+ *	supported number of csa counters.
+ *
+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
+ *	As specified in the &enum nl80211_tdls_peer_capability.
+ *
+ * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
+ *	creation then the new interface will be owned by the netlink socket
+ *	that created it and will be destroyed when the socket is closed.
+ *	If set during scheduled scan start then the new scan req will be
+ *	owned by the netlink socket that created it and the scheduled scan will
+ *	be stopped when the socket is closed.
+ *	If set during configuration of regulatory indoor operation then the
+ *	regulatory indoor configuration would be owned by the netlink socket
+ *	that configured the indoor setting, and the indoor operation would be
+ *	cleared when the socket is closed.
+ *
+ * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
+ *	the TDLS link initiator.
+ *
+ * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection
+ *	shall support Radio Resource Measurements (11k). This attribute can be
+ *	used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests.
+ *	User space applications are expected to use this flag only if the
+ *	underlying device supports these minimal RRM features:
+ *		%NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
+ *		%NL80211_FEATURE_QUIET,
+ *	If this flag is used, driver must add the Power Capabilities IE to the
+ *	association request. In addition, it must also set the RRM capability
+ *	flag in the association request's Capability Info field.
+ *
+ * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
+ *	estimation algorithm (dynack). In order to activate dynack
+ *	%NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower
+ *	drivers to indicate dynack capability. Dynack is automatically disabled
+ *	setting valid value for coverage class.
+ *
+ * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
+ * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
+ * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds
+ *	(per second) (u16 attribute)
+ *
+ * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
+ *	&enum nl80211_smps_mode.
+ *
+ * @NL80211_ATTR_OPER_CLASS: operating class
+ *
+ * @NL80211_ATTR_MAC_MASK: MAC address mask
+ *
+ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
+ *	is self-managing its regulatory information and any regulatory domain
+ *	obtained from it is coming from the device's wiphy and not the global
+ *	cfg80211 regdomain.
+ *
+ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
+ *	array. The feature flags are identified by their bit index (see &enum
+ *	nl80211_ext_feature_index). The bit index is ordered starting at the
+ *	least-significant bit of the first byte in the array, ie. bit index 0
+ *	is located at bit 0 of byte 0. bit index 25 would be located at bit 1
+ *	of byte 3 (u8 array).
+ *
+ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
+ *	returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
+ *	may return a survey entry without a channel indicating global radio
+ *	statistics (only some values are valid and make sense.)
+ *	For devices that don't return such an entry even then, the information
+ *	should be contained in the result as the sum of the respective counters
+ *	over all channels.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a
+ *	scheduled scan (or a WoWLAN net-detect scan) is started, u32
+ *	in seconds.
+
+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
+ *      is operating in an indoor environment.
+ *
+ * @NUM_NL80211_ATTR: total number of nl80211_attrs available
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_attrs {
+/* don't change the order or add anything between, this is ABI! */
+	NL80211_ATTR_UNSPEC,
+
+	NL80211_ATTR_WIPHY,
+	NL80211_ATTR_WIPHY_NAME,
+
+	NL80211_ATTR_IFINDEX,
+	NL80211_ATTR_IFNAME,
+	NL80211_ATTR_IFTYPE,
+
+	NL80211_ATTR_MAC,
+
+	NL80211_ATTR_KEY_DATA,
+	NL80211_ATTR_KEY_IDX,
+	NL80211_ATTR_KEY_CIPHER,
+	NL80211_ATTR_KEY_SEQ,
+	NL80211_ATTR_KEY_DEFAULT,
+
+	NL80211_ATTR_BEACON_INTERVAL,
+	NL80211_ATTR_DTIM_PERIOD,
+	NL80211_ATTR_BEACON_HEAD,
+	NL80211_ATTR_BEACON_TAIL,
+
+	NL80211_ATTR_STA_AID,
+	NL80211_ATTR_STA_FLAGS,
+	NL80211_ATTR_STA_LISTEN_INTERVAL,
+	NL80211_ATTR_STA_SUPPORTED_RATES,
+	NL80211_ATTR_STA_VLAN,
+	NL80211_ATTR_STA_INFO,
+
+	NL80211_ATTR_WIPHY_BANDS,
+
+	NL80211_ATTR_MNTR_FLAGS,
+
+	NL80211_ATTR_MESH_ID,
+	NL80211_ATTR_STA_PLINK_ACTION,
+	NL80211_ATTR_MPATH_NEXT_HOP,
+	NL80211_ATTR_MPATH_INFO,
+
+	NL80211_ATTR_BSS_CTS_PROT,
+	NL80211_ATTR_BSS_SHORT_PREAMBLE,
+	NL80211_ATTR_BSS_SHORT_SLOT_TIME,
+
+	NL80211_ATTR_HT_CAPABILITY,
+
+	NL80211_ATTR_SUPPORTED_IFTYPES,
+
+	NL80211_ATTR_REG_ALPHA2,
+	NL80211_ATTR_REG_RULES,
+
+	NL80211_ATTR_MESH_CONFIG,
+
+	NL80211_ATTR_BSS_BASIC_RATES,
+
+	NL80211_ATTR_WIPHY_TXQ_PARAMS,
+	NL80211_ATTR_WIPHY_FREQ,
+	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+
+	NL80211_ATTR_KEY_DEFAULT_MGMT,
+
+	NL80211_ATTR_MGMT_SUBTYPE,
+	NL80211_ATTR_IE,
+
+	NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
+
+	NL80211_ATTR_SCAN_FREQUENCIES,
+	NL80211_ATTR_SCAN_SSIDS,
+	NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
+	NL80211_ATTR_BSS,
+
+	NL80211_ATTR_REG_INITIATOR,
+	NL80211_ATTR_REG_TYPE,
+
+	NL80211_ATTR_SUPPORTED_COMMANDS,
+
+	NL80211_ATTR_FRAME,
+	NL80211_ATTR_SSID,
+	NL80211_ATTR_AUTH_TYPE,
+	NL80211_ATTR_REASON_CODE,
+
+	NL80211_ATTR_KEY_TYPE,
+
+	NL80211_ATTR_MAX_SCAN_IE_LEN,
+	NL80211_ATTR_CIPHER_SUITES,
+
+	NL80211_ATTR_FREQ_BEFORE,
+	NL80211_ATTR_FREQ_AFTER,
+
+	NL80211_ATTR_FREQ_FIXED,
+
+
+	NL80211_ATTR_WIPHY_RETRY_SHORT,
+	NL80211_ATTR_WIPHY_RETRY_LONG,
+	NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+	NL80211_ATTR_WIPHY_RTS_THRESHOLD,
+
+	NL80211_ATTR_TIMED_OUT,
+
+	NL80211_ATTR_USE_MFP,
+
+	NL80211_ATTR_STA_FLAGS2,
+
+	NL80211_ATTR_CONTROL_PORT,
+
+	NL80211_ATTR_TESTDATA,
+
+	NL80211_ATTR_PRIVACY,
+
+	NL80211_ATTR_DISCONNECTED_BY_AP,
+	NL80211_ATTR_STATUS_CODE,
+
+	NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+	NL80211_ATTR_CIPHER_SUITE_GROUP,
+	NL80211_ATTR_WPA_VERSIONS,
+	NL80211_ATTR_AKM_SUITES,
+
+	NL80211_ATTR_REQ_IE,
+	NL80211_ATTR_RESP_IE,
+
+	NL80211_ATTR_PREV_BSSID,
+
+	NL80211_ATTR_KEY,
+	NL80211_ATTR_KEYS,
+
+	NL80211_ATTR_PID,
+
+	NL80211_ATTR_4ADDR,
+
+	NL80211_ATTR_SURVEY_INFO,
+
+	NL80211_ATTR_PMKID,
+	NL80211_ATTR_MAX_NUM_PMKIDS,
+
+	NL80211_ATTR_DURATION,
+
+	NL80211_ATTR_COOKIE,
+
+	NL80211_ATTR_WIPHY_COVERAGE_CLASS,
+
+	NL80211_ATTR_TX_RATES,
+
+	NL80211_ATTR_FRAME_MATCH,
+
+	NL80211_ATTR_ACK,
+
+	NL80211_ATTR_PS_STATE,
+
+	NL80211_ATTR_CQM,
+
+	NL80211_ATTR_LOCAL_STATE_CHANGE,
+
+	NL80211_ATTR_AP_ISOLATE,
+
+	NL80211_ATTR_WIPHY_TX_POWER_SETTING,
+	NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
+
+	NL80211_ATTR_TX_FRAME_TYPES,
+	NL80211_ATTR_RX_FRAME_TYPES,
+	NL80211_ATTR_FRAME_TYPE,
+
+	NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
+
+	NL80211_ATTR_SUPPORT_IBSS_RSN,
+
+	NL80211_ATTR_WIPHY_ANTENNA_TX,
+	NL80211_ATTR_WIPHY_ANTENNA_RX,
+
+	NL80211_ATTR_MCAST_RATE,
+
+	NL80211_ATTR_OFFCHANNEL_TX_OK,
+
+	NL80211_ATTR_BSS_HT_OPMODE,
+
+	NL80211_ATTR_KEY_DEFAULT_TYPES,
+
+	NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
+
+	NL80211_ATTR_MESH_SETUP,
+
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
+
+	NL80211_ATTR_SUPPORT_MESH_AUTH,
+	NL80211_ATTR_STA_PLINK_STATE,
+
+	NL80211_ATTR_WOWLAN_TRIGGERS,
+	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
+
+	NL80211_ATTR_SCHED_SCAN_INTERVAL,
+
+	NL80211_ATTR_INTERFACE_COMBINATIONS,
+	NL80211_ATTR_SOFTWARE_IFTYPES,
+
+	NL80211_ATTR_REKEY_DATA,
+
+	NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
+	NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
+
+	NL80211_ATTR_SCAN_SUPP_RATES,
+
+	NL80211_ATTR_HIDDEN_SSID,
+
+	NL80211_ATTR_IE_PROBE_RESP,
+	NL80211_ATTR_IE_ASSOC_RESP,
+
+	NL80211_ATTR_STA_WME,
+	NL80211_ATTR_SUPPORT_AP_UAPSD,
+
+	NL80211_ATTR_ROAM_SUPPORT,
+
+	NL80211_ATTR_SCHED_SCAN_MATCH,
+	NL80211_ATTR_MAX_MATCH_SETS,
+
+	NL80211_ATTR_PMKSA_CANDIDATE,
+
+	NL80211_ATTR_TX_NO_CCK_RATE,
+
+	NL80211_ATTR_TDLS_ACTION,
+	NL80211_ATTR_TDLS_DIALOG_TOKEN,
+	NL80211_ATTR_TDLS_OPERATION,
+	NL80211_ATTR_TDLS_SUPPORT,
+	NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+
+	NL80211_ATTR_DEVICE_AP_SME,
+
+	NL80211_ATTR_DONT_WAIT_FOR_ACK,
+
+	NL80211_ATTR_FEATURE_FLAGS,
+
+	NL80211_ATTR_PROBE_RESP_OFFLOAD,
+
+	NL80211_ATTR_PROBE_RESP,
+
+	NL80211_ATTR_DFS_REGION,
+
+	NL80211_ATTR_DISABLE_HT,
+	NL80211_ATTR_HT_CAPABILITY_MASK,
+
+	NL80211_ATTR_NOACK_MAP,
+
+	NL80211_ATTR_INACTIVITY_TIMEOUT,
+
+	NL80211_ATTR_RX_SIGNAL_DBM,
+
+	NL80211_ATTR_BG_SCAN_PERIOD,
+
+	NL80211_ATTR_WDEV,
+
+	NL80211_ATTR_USER_REG_HINT_TYPE,
+
+	NL80211_ATTR_CONN_FAILED_REASON,
+
+	NL80211_ATTR_SAE_DATA,
+
+	NL80211_ATTR_VHT_CAPABILITY,
+
+	NL80211_ATTR_SCAN_FLAGS,
+
+	NL80211_ATTR_CHANNEL_WIDTH,
+	NL80211_ATTR_CENTER_FREQ1,
+	NL80211_ATTR_CENTER_FREQ2,
+
+	NL80211_ATTR_P2P_CTWINDOW,
+	NL80211_ATTR_P2P_OPPPS,
+
+	NL80211_ATTR_LOCAL_MESH_POWER_MODE,
+
+	NL80211_ATTR_ACL_POLICY,
+
+	NL80211_ATTR_MAC_ADDRS,
+
+	NL80211_ATTR_MAC_ACL_MAX,
+
+	NL80211_ATTR_RADAR_EVENT,
+
+	NL80211_ATTR_EXT_CAPA,
+	NL80211_ATTR_EXT_CAPA_MASK,
+
+	NL80211_ATTR_STA_CAPABILITY,
+	NL80211_ATTR_STA_EXT_CAPABILITY,
+
+	NL80211_ATTR_PROTOCOL_FEATURES,
+	NL80211_ATTR_SPLIT_WIPHY_DUMP,
+
+	NL80211_ATTR_DISABLE_VHT,
+	NL80211_ATTR_VHT_CAPABILITY_MASK,
+
+	NL80211_ATTR_MDID,
+	NL80211_ATTR_IE_RIC,
+
+	NL80211_ATTR_CRIT_PROT_ID,
+	NL80211_ATTR_MAX_CRIT_PROT_DURATION,
+
+	NL80211_ATTR_PEER_AID,
+
+	NL80211_ATTR_COALESCE_RULE,
+
+	NL80211_ATTR_CH_SWITCH_COUNT,
+	NL80211_ATTR_CH_SWITCH_BLOCK_TX,
+	NL80211_ATTR_CSA_IES,
+	NL80211_ATTR_CSA_C_OFF_BEACON,
+	NL80211_ATTR_CSA_C_OFF_PRESP,
+
+	NL80211_ATTR_RXMGMT_FLAGS,
+
+	NL80211_ATTR_STA_SUPPORTED_CHANNELS,
+
+	NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES,
+
+	NL80211_ATTR_HANDLE_DFS,
+
+	NL80211_ATTR_SUPPORT_5_MHZ,
+	NL80211_ATTR_SUPPORT_10_MHZ,
+
+	NL80211_ATTR_OPMODE_NOTIF,
+
+	NL80211_ATTR_VENDOR_ID,
+	NL80211_ATTR_VENDOR_SUBCMD,
+	NL80211_ATTR_VENDOR_DATA,
+	NL80211_ATTR_VENDOR_EVENTS,
+
+	NL80211_ATTR_QOS_MAP,
+
+	NL80211_ATTR_MAC_HINT,
+	NL80211_ATTR_WIPHY_FREQ_HINT,
+
+	NL80211_ATTR_MAX_AP_ASSOC_STA,
+
+	NL80211_ATTR_TDLS_PEER_CAPABILITY,
+
+	NL80211_ATTR_SOCKET_OWNER,
+
+	NL80211_ATTR_CSA_C_OFFSETS_TX,
+	NL80211_ATTR_MAX_CSA_COUNTERS,
+
+	NL80211_ATTR_TDLS_INITIATOR,
+
+	NL80211_ATTR_USE_RRM,
+
+	NL80211_ATTR_WIPHY_DYN_ACK,
+
+	NL80211_ATTR_TSID,
+	NL80211_ATTR_USER_PRIO,
+	NL80211_ATTR_ADMITTED_TIME,
+
+	NL80211_ATTR_SMPS_MODE,
+
+	NL80211_ATTR_OPER_CLASS,
+
+	NL80211_ATTR_MAC_MASK,
+
+	NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
+
+	NL80211_ATTR_EXT_FEATURES,
+
+	NL80211_ATTR_SURVEY_RADIO_STATS,
+
+	NL80211_ATTR_NETNS_FD,
+
+	NL80211_ATTR_SCHED_SCAN_DELAY,
+
+	NL80211_ATTR_REG_INDOOR,
+
+	/* add attributes here, update the policy in nl80211.c */
+
+	__NL80211_ATTR_AFTER_LAST,
+	NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
+	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
+};
+
+/* source-level API compatibility */
+#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+#define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
+#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
+
+/*
+ * Allow user space programs to use #ifdef on new attributes by defining them
+ * here
+ */
+#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
+#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
+#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
+#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
+#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
+#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
+#define NL80211_ATTR_IE NL80211_ATTR_IE
+#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
+#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
+#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
+#define NL80211_ATTR_SSID NL80211_ATTR_SSID
+#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
+#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
+#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
+#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
+#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
+#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
+#define NL80211_ATTR_KEY NL80211_ATTR_KEY
+#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
+#define NL80211_MAX_SUPP_RATES			32
+#define NL80211_MAX_SUPP_HT_RATES		77
+#define NL80211_MAX_SUPP_REG_RULES		64
+#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
+#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
+#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
+#define NL80211_HT_CAPABILITY_LEN		26
+#define NL80211_VHT_CAPABILITY_LEN		12
+
+#define NL80211_MAX_NR_CIPHER_SUITES		5
+#define NL80211_MAX_NR_AKM_SUITES		2
+
+#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME	10
+
+/* default RSSI threshold for scan results if none specified. */
+#define NL80211_SCAN_RSSI_THOLD_OFF		-300
+
+#define NL80211_CQM_TXE_MAX_INTVL		1800
+
+/**
+ * enum nl80211_iftype - (virtual) interface types
+ *
+ * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
+ * @NL80211_IFTYPE_ADHOC: independent BSS member
+ * @NL80211_IFTYPE_STATION: managed BSS member
+ * @NL80211_IFTYPE_AP: access point
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
+ *	are a bit special in that they must always be tied to a pre-existing
+ *	AP type interface.
+ * @NL80211_IFTYPE_WDS: wireless distribution interface
+ * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
+ * @NL80211_IFTYPE_MESH_POINT: mesh point
+ * @NL80211_IFTYPE_P2P_CLIENT: P2P client
+ * @NL80211_IFTYPE_P2P_GO: P2P group owner
+ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
+ *	and therefore can't be created in the normal ways, use the
+ *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
+ *	commands to create and destroy one
+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
+ *	This mode corresponds to the MIB variable dot11OCBActivated=true
+ * @NL80211_IFTYPE_MAX: highest interface type number currently defined
+ * @NUM_NL80211_IFTYPES: number of defined interface types
+ *
+ * These values are used with the %NL80211_ATTR_IFTYPE
+ * to set the type of an interface.
+ *
+ */
+enum nl80211_iftype {
+	NL80211_IFTYPE_UNSPECIFIED,
+	NL80211_IFTYPE_ADHOC,
+	NL80211_IFTYPE_STATION,
+	NL80211_IFTYPE_AP,
+	NL80211_IFTYPE_AP_VLAN,
+	NL80211_IFTYPE_WDS,
+	NL80211_IFTYPE_MONITOR,
+	NL80211_IFTYPE_MESH_POINT,
+	NL80211_IFTYPE_P2P_CLIENT,
+	NL80211_IFTYPE_P2P_GO,
+	NL80211_IFTYPE_P2P_DEVICE,
+	NL80211_IFTYPE_OCB,
+
+	/* keep last */
+	NUM_NL80211_IFTYPES,
+	NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
+};
+
+/**
+ * enum nl80211_sta_flags - station flags
+ *
+ * Station flags. When a station is added to an AP interface, it is
+ * assumed to be already associated (and hence authenticated.)
+ *
+ * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
+ * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
+ *	with short barker preamble
+ * @NL80211_STA_FLAG_WME: station is WME/QoS capable
+ * @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
+ * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
+ *	only be used in managed mode (even in the flags mask). Note that the
+ *	flag can't be changed, it is only valid while adding a station, and
+ *	attempts to change it will silently be ignored (rather than rejected
+ *	as errors.)
+ * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
+ *	that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
+ *	previously added station into associated state
+ * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
+ * @__NL80211_STA_FLAG_AFTER_LAST: internal use
+ */
+enum nl80211_sta_flags {
+	__NL80211_STA_FLAG_INVALID,
+	NL80211_STA_FLAG_AUTHORIZED,
+	NL80211_STA_FLAG_SHORT_PREAMBLE,
+	NL80211_STA_FLAG_WME,
+	NL80211_STA_FLAG_MFP,
+	NL80211_STA_FLAG_AUTHENTICATED,
+	NL80211_STA_FLAG_TDLS_PEER,
+	NL80211_STA_FLAG_ASSOCIATED,
+
+	/* keep last */
+	__NL80211_STA_FLAG_AFTER_LAST,
+	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
+};
+
+#define NL80211_STA_FLAG_MAX_OLD_API	NL80211_STA_FLAG_TDLS_PEER
+
+/**
+ * struct nl80211_sta_flag_update - station flags mask/set
+ * @mask: mask of station flags to set
+ * @set: which values to set them to
+ *
+ * Both mask and set contain bits as per &enum nl80211_sta_flags.
+ */
+struct nl80211_sta_flag_update {
+	__u32 mask;
+	__u32 set;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+ * when getting information about the bitrate of a station.
+ * There are 2 attributes for bitrate, a legacy one that represents
+ * a 16-bit value, and new one that represents a 32-bit value.
+ * If the rate value fits into 16 bit, both attributes are reported
+ * with the same value. If the rate is too high to fit into 16 bits
+ * (>6.5535Gbps) only 32-bit attribute is included.
+ * User space tools encouraged to use the 32-bit attribute and fall
+ * back to the 16-bit one for compatibility with older kernels.
+ *
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
+ * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
+ * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
+ * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
+ * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
+ *	same as 160 for purposes of the bitrates
+ * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
+ * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
+ *	a legacy rate and will be reported as the actual bitrate, i.e.
+ *	half the base (20 MHz) rate
+ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
+ *	a legacy rate and will be reported as the actual bitrate, i.e.
+ *	a quarter of the base (20 MHz) rate
+ * @__NL80211_RATE_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_rate_info {
+	__NL80211_RATE_INFO_INVALID,
+	NL80211_RATE_INFO_BITRATE,
+	NL80211_RATE_INFO_MCS,
+	NL80211_RATE_INFO_40_MHZ_WIDTH,
+	NL80211_RATE_INFO_SHORT_GI,
+	NL80211_RATE_INFO_BITRATE32,
+	NL80211_RATE_INFO_VHT_MCS,
+	NL80211_RATE_INFO_VHT_NSS,
+	NL80211_RATE_INFO_80_MHZ_WIDTH,
+	NL80211_RATE_INFO_80P80_MHZ_WIDTH,
+	NL80211_RATE_INFO_160_MHZ_WIDTH,
+	NL80211_RATE_INFO_10_MHZ_WIDTH,
+	NL80211_RATE_INFO_5_MHZ_WIDTH,
+
+	/* keep last */
+	__NL80211_RATE_INFO_AFTER_LAST,
+	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_bss_param - BSS information collected by STA
+ *
+ * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled
+ *	(flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled
+ *	(flag)
+ * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
+ * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
+ * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
+ * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
+ */
+enum nl80211_sta_bss_param {
+	__NL80211_STA_BSS_PARAM_INVALID,
+	NL80211_STA_BSS_PARAM_CTS_PROT,
+	NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
+	NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
+	NL80211_STA_BSS_PARAM_DTIM_PERIOD,
+	NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
+
+	/* keep last */
+	__NL80211_STA_BSS_PARAM_AFTER_LAST,
+	NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_info - station information
+ *
+ * These attribute types are used with %NL80211_ATTR_STA_INFO
+ * when getting information about a station.
+ *
+ * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
+ *	(u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
+ *	(u32, to this station)
+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
+ *	(u64, from this station)
+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
+ *	(u64, to this station)
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ * 	containing info as possible, see &enum nl80211_rate_info
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
+ *	(u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
+ *	(u32, to this station)
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
+ *	(u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
+ * @NL80211_STA_INFO_LLID: the station's mesh LLID
+ * @NL80211_STA_INFO_PLID: the station's mesh PLID
+ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ *	(see %enum nl80211_plink_state)
+ * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
+ *	attribute, like NL80211_STA_INFO_TX_BITRATE.
+ * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
+ *     containing info as possible, see &enum nl80211_sta_bss_param
+ * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
+ * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
+ * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
+ * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
+ * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode
+ * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
+ * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
+ *	non-peer STA
+ * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
+ *	Contains a nested array of signal strength attributes (u8, dBm)
+ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
+ *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
+ * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
+ *	802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
+ *	(u64)
+ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
+ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
+ *	for beacons only (u8, dBm)
+ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
+ *	This is a nested attribute where each the inner attribute number is the
+ *	TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
+ *	each one of those is again nested with &enum nl80211_tid_stats
+ *	attributes carrying the actual values.
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ */
+enum nl80211_sta_info {
+	__NL80211_STA_INFO_INVALID,
+	NL80211_STA_INFO_INACTIVE_TIME,
+	NL80211_STA_INFO_RX_BYTES,
+	NL80211_STA_INFO_TX_BYTES,
+	NL80211_STA_INFO_LLID,
+	NL80211_STA_INFO_PLID,
+	NL80211_STA_INFO_PLINK_STATE,
+	NL80211_STA_INFO_SIGNAL,
+	NL80211_STA_INFO_TX_BITRATE,
+	NL80211_STA_INFO_RX_PACKETS,
+	NL80211_STA_INFO_TX_PACKETS,
+	NL80211_STA_INFO_TX_RETRIES,
+	NL80211_STA_INFO_TX_FAILED,
+	NL80211_STA_INFO_SIGNAL_AVG,
+	NL80211_STA_INFO_RX_BITRATE,
+	NL80211_STA_INFO_BSS_PARAM,
+	NL80211_STA_INFO_CONNECTED_TIME,
+	NL80211_STA_INFO_STA_FLAGS,
+	NL80211_STA_INFO_BEACON_LOSS,
+	NL80211_STA_INFO_T_OFFSET,
+	NL80211_STA_INFO_LOCAL_PM,
+	NL80211_STA_INFO_PEER_PM,
+	NL80211_STA_INFO_NONPEER_PM,
+	NL80211_STA_INFO_RX_BYTES64,
+	NL80211_STA_INFO_TX_BYTES64,
+	NL80211_STA_INFO_CHAIN_SIGNAL,
+	NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
+	NL80211_STA_INFO_EXPECTED_THROUGHPUT,
+	NL80211_STA_INFO_RX_DROP_MISC,
+	NL80211_STA_INFO_BEACON_RX,
+	NL80211_STA_INFO_BEACON_SIGNAL_AVG,
+	NL80211_STA_INFO_TID_STATS,
+
+	/* keep last */
+	__NL80211_STA_INFO_AFTER_LAST,
+	NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_tid_stats - per TID statistics attributes
+ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
+ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
+ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
+ *	attempted to transmit; u64)
+ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
+ *	transmitted MSDUs (not counting the first attempt; u64)
+ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
+ *	MSDUs (u64)
+ * @NUM_NL80211_TID_STATS: number of attributes here
+ * @NL80211_TID_STATS_MAX: highest numbered attribute here
+ */
+enum nl80211_tid_stats {
+	__NL80211_TID_STATS_INVALID,
+	NL80211_TID_STATS_RX_MSDU,
+	NL80211_TID_STATS_TX_MSDU,
+	NL80211_TID_STATS_TX_MSDU_RETRIES,
+	NL80211_TID_STATS_TX_MSDU_FAILED,
+
+	/* keep last */
+	NUM_NL80211_TID_STATS,
+	NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
+};
+
+/**
+ * enum nl80211_mpath_flags - nl80211 mesh path flags
+ *
+ * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
+ * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
+ * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
+ * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
+ * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
+ */
+enum nl80211_mpath_flags {
+	NL80211_MPATH_FLAG_ACTIVE =	1<<0,
+	NL80211_MPATH_FLAG_RESOLVING =	1<<1,
+	NL80211_MPATH_FLAG_SN_VALID =	1<<2,
+	NL80211_MPATH_FLAG_FIXED =	1<<3,
+	NL80211_MPATH_FLAG_RESOLVED =	1<<4,
+};
+
+/**
+ * enum nl80211_mpath_info - mesh path information
+ *
+ * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
+ * information about a mesh path.
+ *
+ * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
+ * @NL80211_MPATH_INFO_SN: destination sequence number
+ * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
+ * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
+ * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
+ * 	&enum nl80211_mpath_flags;
+ * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
+ *	currently defind
+ * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_mpath_info {
+	__NL80211_MPATH_INFO_INVALID,
+	NL80211_MPATH_INFO_FRAME_QLEN,
+	NL80211_MPATH_INFO_SN,
+	NL80211_MPATH_INFO_METRIC,
+	NL80211_MPATH_INFO_EXPTIME,
+	NL80211_MPATH_INFO_FLAGS,
+	NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
+	NL80211_MPATH_INFO_DISCOVERY_RETRIES,
+
+	/* keep last */
+	__NL80211_MPATH_INFO_AFTER_LAST,
+	NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band_attr - band attributes
+ * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
+ *	an array of nested frequency attributes
+ * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
+ *	an array of nested bitrate attributes
+ * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
+ *	defined in 802.11n
+ * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
+ * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
+ *	defined in 802.11ac
+ * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
+ * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_band_attr {
+	__NL80211_BAND_ATTR_INVALID,
+	NL80211_BAND_ATTR_FREQS,
+	NL80211_BAND_ATTR_RATES,
+
+	NL80211_BAND_ATTR_HT_MCS_SET,
+	NL80211_BAND_ATTR_HT_CAPA,
+	NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
+	NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
+
+	NL80211_BAND_ATTR_VHT_MCS_SET,
+	NL80211_BAND_ATTR_VHT_CAPA,
+
+	/* keep last */
+	__NL80211_BAND_ATTR_AFTER_LAST,
+	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+
+/**
+ * enum nl80211_frequency_attr - frequency attributes
+ * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
+ * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
+ *	regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
+ * 	are permitted on this channel, this includes sending probe
+ * 	requests, or modes of operation that require beaconing.
+ * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
+ *	(100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
+ *	(enum nl80211_dfs_state)
+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
+ *	this channel is in this DFS state.
+ * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
+ *	channel as the control channel
+ * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this
+ *	channel as the control channel
+ * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel
+ *	as the primary or any of the secondary channels isn't possible,
+ *	this includes 80+80 channels
+ * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
+ *	using this channel as the primary or any of the secondary channels
+ *	isn't possible
+ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
+ *	channel. A channel that has the INDOOR_ONLY attribute can only be
+ *	used when there is a clear assessment that the device is operating in
+ *	an indoor surroundings, i.e., it is connected to AC power (and not
+ *	through portable DC inverters) or is under the control of a master
+ *	that is acting as an AP and is connected to AC power.
+ * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
+ *	channel if it's connected concurrently to a BSS on the same channel on
+ *	the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
+ *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
+ *	channel that has the GO_CONCURRENT attribute set can be done when there
+ *	is a clear assessment that the device is operating under the guidance of
+ *	an authorized master, i.e., setting up a GO while the device is also
+ *	connected to an AP with DFS and radar detection on the UNII band (it is
+ *	up to user-space, i.e., wpa_supplicant to perform the required
+ *	verifications)
+ * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ *	currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+ *
+ * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
+ * for more information on the FCC description of the relaxations allowed
+ * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
+ * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
+ */
+enum nl80211_frequency_attr {
+	__NL80211_FREQUENCY_ATTR_INVALID,
+	NL80211_FREQUENCY_ATTR_FREQ,
+	NL80211_FREQUENCY_ATTR_DISABLED,
+	NL80211_FREQUENCY_ATTR_NO_IR,
+	__NL80211_FREQUENCY_ATTR_NO_IBSS,
+	NL80211_FREQUENCY_ATTR_RADAR,
+	NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
+	NL80211_FREQUENCY_ATTR_DFS_STATE,
+	NL80211_FREQUENCY_ATTR_DFS_TIME,
+	NL80211_FREQUENCY_ATTR_NO_HT40_MINUS,
+	NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
+	NL80211_FREQUENCY_ATTR_NO_80MHZ,
+	NL80211_FREQUENCY_ATTR_NO_160MHZ,
+	NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
+	NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
+	NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
+	NL80211_FREQUENCY_ATTR_NO_20MHZ,
+	NL80211_FREQUENCY_ATTR_NO_10MHZ,
+
+	/* keep last */
+	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
+	NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
+#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN	NL80211_FREQUENCY_ATTR_NO_IR
+#define NL80211_FREQUENCY_ATTR_NO_IBSS		NL80211_FREQUENCY_ATTR_NO_IR
+#define NL80211_FREQUENCY_ATTR_NO_IR		NL80211_FREQUENCY_ATTR_NO_IR
+
+/**
+ * enum nl80211_bitrate_attr - bitrate attributes
+ * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
+ * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
+ *	in 2.4 GHz band.
+ * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
+ *	currently defined
+ * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_bitrate_attr {
+	__NL80211_BITRATE_ATTR_INVALID,
+	NL80211_BITRATE_ATTR_RATE,
+	NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
+
+	/* keep last */
+	__NL80211_BITRATE_ATTR_AFTER_LAST,
+	NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
+ * 	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
+ * 	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
+ * 	wireless core it thinks its knows the regulatory domain we should be in.
+ * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
+ * 	802.11 country information element with regulatory information it
+ * 	thinks we should consider. cfg80211 only processes the country
+ *	code from the IE, and relies on the regulatory domain information
+ *	structure passed by userspace (CRDA) from our wireless-regdb.
+ *	If a channel is enabled but the country code indicates it should
+ *	be disabled we disable the channel and re-enable it upon disassociation.
+ */
+enum nl80211_reg_initiator {
+	NL80211_REGDOM_SET_BY_CORE,
+	NL80211_REGDOM_SET_BY_USER,
+	NL80211_REGDOM_SET_BY_DRIVER,
+	NL80211_REGDOM_SET_BY_COUNTRY_IE,
+};
+
+/**
+ * enum nl80211_reg_type - specifies the type of regulatory domain
+ * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
+ *	to a specific country. When this is set you can count on the
+ *	ISO / IEC 3166 alpha2 country code being valid.
+ * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
+ * 	domain.
+ * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
+ * 	driver specific world regulatory domain. These do not apply system-wide
+ * 	and are only applicable to the individual devices which have requested
+ * 	them to be applied.
+ * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
+ *	of an intersection between two regulatory domains -- the previously
+ *	set regulatory domain on the system and the last accepted regulatory
+ *	domain request to be processed.
+ */
+enum nl80211_reg_type {
+	NL80211_REGDOM_TYPE_COUNTRY,
+	NL80211_REGDOM_TYPE_WORLD,
+	NL80211_REGDOM_TYPE_CUSTOM_WORLD,
+	NL80211_REGDOM_TYPE_INTERSECTION,
+};
+
+/**
+ * enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
+ * 	considerations for a given frequency range. These are the
+ * 	&enum nl80211_reg_rule_flags.
+ * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
+ * 	rule in KHz. This is not a center of frequency but an actual regulatory
+ * 	band edge.
+ * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
+ * 	in KHz. This is not a center a frequency but an actual regulatory
+ * 	band edge.
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+ *	frequency range, in KHz.
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+ * 	for a given frequency range. The value is in mBi (100 * dBi).
+ * 	If you don't have one then don't send this.
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+ * 	a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ *	If not present or 0 default CAC time will be used.
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+ *	currently defined
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_reg_rule_attr {
+	__NL80211_REG_RULE_ATTR_INVALID,
+	NL80211_ATTR_REG_RULE_FLAGS,
+
+	NL80211_ATTR_FREQ_RANGE_START,
+	NL80211_ATTR_FREQ_RANGE_END,
+	NL80211_ATTR_FREQ_RANGE_MAX_BW,
+
+	NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+	NL80211_ATTR_POWER_RULE_MAX_EIRP,
+
+	NL80211_ATTR_DFS_CAC_TIME,
+
+	/* keep last */
+	__NL80211_REG_RULE_ATTR_AFTER_LAST,
+	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+ *	only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
+ *	BSS in scan results. Filtering is turned off if not specified. Note that
+ *	if this attribute is in a match set of its own, then it is treated as
+ *	the default value for all matchsets with an SSID, rather than being a
+ *	matchset of its own without an RSSI filter. This is due to problems with
+ *	how this API was implemented in the past. Also, due to the same problem,
+ *	the only way to create a matchset with only an RSSI filter (with this
+ *	attribute) is if there's only a single matchset with the RSSI attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ *	attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_match_attr {
+	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
+
+	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
+
+	/* keep last */
+	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
+	NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
+		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
+};
+
+/* only for backward compatibility */
+#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID
+
+/**
+ * enum nl80211_reg_rule_flags - regulatory rule flags
+ *
+ * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
+ * @NL80211_RRF_NO_CCK: CCK modulation not allowed
+ * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
+ * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
+ * @NL80211_RRF_DFS: DFS support is required to be used
+ * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
+ * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
+ * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
+ * 	this includes probe requests or modes of operation that require
+ * 	beaconing.
+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
+ *	base on contiguous rules and wider channels will be allowed to cross
+ *	multiple contiguous/overlapping frequency ranges.
+ * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
+ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
+ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
+ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
+ * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
+ */
+enum nl80211_reg_rule_flags {
+	NL80211_RRF_NO_OFDM		= 1<<0,
+	NL80211_RRF_NO_CCK		= 1<<1,
+	NL80211_RRF_NO_INDOOR		= 1<<2,
+	NL80211_RRF_NO_OUTDOOR		= 1<<3,
+	NL80211_RRF_DFS			= 1<<4,
+	NL80211_RRF_PTP_ONLY		= 1<<5,
+	NL80211_RRF_PTMP_ONLY		= 1<<6,
+	NL80211_RRF_NO_IR		= 1<<7,
+	__NL80211_RRF_NO_IBSS		= 1<<8,
+	NL80211_RRF_AUTO_BW		= 1<<11,
+	NL80211_RRF_GO_CONCURRENT	= 1<<12,
+	NL80211_RRF_NO_HT40MINUS	= 1<<13,
+	NL80211_RRF_NO_HT40PLUS		= 1<<14,
+	NL80211_RRF_NO_80MHZ		= 1<<15,
+	NL80211_RRF_NO_160MHZ		= 1<<16,
+};
+
+#define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
+#define NL80211_RRF_NO_IBSS		NL80211_RRF_NO_IR
+#define NL80211_RRF_NO_IR		NL80211_RRF_NO_IR
+#define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
+					 NL80211_RRF_NO_HT40PLUS)
+
+/* For backport compatibility with older userspace */
+#define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
+
+/**
+ * enum nl80211_dfs_regions - regulatory DFS regions
+ *
+ * @NL80211_DFS_UNSET: Country has no DFS master region specified
+ * @NL80211_DFS_FCC: Country follows DFS master rules from FCC
+ * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI
+ * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec
+ */
+enum nl80211_dfs_regions {
+	NL80211_DFS_UNSET	= 0,
+	NL80211_DFS_FCC		= 1,
+	NL80211_DFS_ETSI	= 2,
+	NL80211_DFS_JP		= 3,
+};
+
+/**
+ * enum nl80211_user_reg_hint_type - type of user regulatory hint
+ *
+ * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always
+ *	assumed if the attribute is not set.
+ * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular
+ *	base station. Device drivers that have been tested to work
+ *	properly to support this type of hint can enable these hints
+ *	by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature
+ *	capability on the struct wiphy. The wireless core will
+ *	ignore all cell base station hints until at least one device
+ *	present has been registered with the wireless core that
+ *	has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
+ *	supported feature.
+ * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
+ *	platform is operating in an indoor environment.
+ */
+enum nl80211_user_reg_hint_type {
+	NL80211_USER_REG_HINT_USER	= 0,
+	NL80211_USER_REG_HINT_CELL_BASE = 1,
+	NL80211_USER_REG_HINT_INDOOR    = 2,
+};
+
+/**
+ * enum nl80211_survey_info - survey information
+ *
+ * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
+ * when getting information about a survey.
+ *
+ * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
+ * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
+ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
+ *	was turned on (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
+ *	channel was sensed busy (either due to activity or energy detect)
+ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
+ *	channel was sensed busy
+ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
+ *	receiving data (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
+ *	transmitting data (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
+ *	(on this channel or globally)
+ * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+ *	currently defined
+ * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_survey_info {
+	__NL80211_SURVEY_INFO_INVALID,
+	NL80211_SURVEY_INFO_FREQUENCY,
+	NL80211_SURVEY_INFO_NOISE,
+	NL80211_SURVEY_INFO_IN_USE,
+	NL80211_SURVEY_INFO_TIME,
+	NL80211_SURVEY_INFO_TIME_BUSY,
+	NL80211_SURVEY_INFO_TIME_EXT_BUSY,
+	NL80211_SURVEY_INFO_TIME_RX,
+	NL80211_SURVEY_INFO_TIME_TX,
+	NL80211_SURVEY_INFO_TIME_SCAN,
+
+	/* keep last */
+	__NL80211_SURVEY_INFO_AFTER_LAST,
+	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
+};
+
+/* keep old names for compatibility */
+#define NL80211_SURVEY_INFO_CHANNEL_TIME		NL80211_SURVEY_INFO_TIME
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY		NL80211_SURVEY_INFO_TIME_BUSY
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY	NL80211_SURVEY_INFO_TIME_EXT_BUSY
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX		NL80211_SURVEY_INFO_TIME_RX
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX		NL80211_SURVEY_INFO_TIME_TX
+
+/**
+ * enum nl80211_mntr_flags - monitor configuration flags
+ *
+ * Monitor configuration flags.
+ *
+ * @__NL80211_MNTR_FLAG_INVALID: reserved
+ *
+ * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
+ * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
+ * @NL80211_MNTR_FLAG_CONTROL: pass control frames
+ * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
+ * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
+ *	overrides all other flags.
+ * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address
+ *	and ACK incoming unicast packets.
+ *
+ * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
+ * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
+ */
+enum nl80211_mntr_flags {
+	__NL80211_MNTR_FLAG_INVALID,
+	NL80211_MNTR_FLAG_FCSFAIL,
+	NL80211_MNTR_FLAG_PLCPFAIL,
+	NL80211_MNTR_FLAG_CONTROL,
+	NL80211_MNTR_FLAG_OTHER_BSS,
+	NL80211_MNTR_FLAG_COOK_FRAMES,
+	NL80211_MNTR_FLAG_ACTIVE,
+
+	/* keep last */
+	__NL80211_MNTR_FLAG_AFTER_LAST,
+	NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mesh_power_mode - mesh power save modes
+ *
+ * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is
+ *	not known or has not been set yet.
+ * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is
+ *	in Awake state all the time.
+ * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will
+ *	alternate between Active and Doze states, but will wake up for
+ *	neighbor's beacons.
+ * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will
+ *	alternate between Active and Doze states, but may not wake up
+ *	for neighbor's beacons.
+ *
+ * @__NL80211_MESH_POWER_AFTER_LAST - internal use
+ * @NL80211_MESH_POWER_MAX - highest possible power save level
+ */
+
+enum nl80211_mesh_power_mode {
+	NL80211_MESH_POWER_UNKNOWN,
+	NL80211_MESH_POWER_ACTIVE,
+	NL80211_MESH_POWER_LIGHT_SLEEP,
+	NL80211_MESH_POWER_DEEP_SLEEP,
+
+	__NL80211_MESH_POWER_AFTER_LAST,
+	NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_meshconf_params - mesh configuration parameters
+ *
+ * Mesh configuration parameters. These can be changed while the mesh is
+ * active.
+ *
+ * @__NL80211_MESHCONF_INVALID: internal use
+ *
+ * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
+ *	millisecond units, used by the Peer Link Open message
+ *
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
+ *	millisecond units, used by the peer link management to close a peer link
+ *
+ * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
+ *	millisecond units
+ *
+ * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
+ *	on this mesh interface
+ *
+ * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
+ *	open retries that can be sent to establish a new peer link instance in a
+ *	mesh
+ *
+ * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
+ *	point.
+ *
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open
+ *	peer links when we detect compatible mesh peers. Disabled if
+ *	@NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are
+ *	set.
+ *
+ * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
+ *	containing a PREQ that an MP can send to a particular destination (path
+ *	target)
+ *
+ * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
+ *	(in milliseconds)
+ *
+ * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
+ *	until giving up on a path discovery (in milliseconds)
+ *
+ * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
+ *	points receiving a PREQ shall consider the forwarding information from
+ *	the root to be valid. (TU = time unit)
+ *
+ * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
+ *	TUs) during which an MP can send only one action frame containing a PREQ
+ *	reference element
+ *
+ * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
+ *	that it takes for an HWMP information element to propagate across the
+ *	mesh
+ *
+ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
+ *
+ * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
+ *	source mesh point for path selection elements.
+ *
+ * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
+ *	root announcements are transmitted.
+ *
+ * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
+ *	access to a broader network beyond the MBSS.  This is done via Root
+ *	Announcement frames.
+ *
+ * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
+ *	TUs) during which a mesh STA can send only one Action frame containing a
+ *	PERR element.
+ *
+ * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
+ *	or forwarding entity (default is TRUE - forwarding entity)
+ *
+ * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
+ *	threshold for average signal strength of candidate station to establish
+ *	a peer link.
+ *
+ * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
+ *	to synchronize to for 11s default synchronization method
+ *	(see 11C.12.2.2)
+ *
+ * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
+ *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
+ * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for
+ *	which mesh STAs receiving a proactive PREQ shall consider the forwarding
+ *	information to the root mesh STA to be valid.
+ *
+ * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
+ *	proactive PREQs are transmitted.
+ *
+ * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time
+ *	(in TUs) during which a mesh STA can send only one Action frame
+ *	containing a PREQ element for root path confirmation.
+ *
+ * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links.
+ *	type &enum nl80211_mesh_power_mode (u32)
+ *
+ * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
+ *
+ * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
+ *	established peering with for longer than this time (in seconds), then
+ *	remove it from the STA's list of peers. You may set this to 0 to disable
+ *	the removal of the STA. Default is 30 minutes.
+ *
+ * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_meshconf_params {
+	__NL80211_MESHCONF_INVALID,
+	NL80211_MESHCONF_RETRY_TIMEOUT,
+	NL80211_MESHCONF_CONFIRM_TIMEOUT,
+	NL80211_MESHCONF_HOLDING_TIMEOUT,
+	NL80211_MESHCONF_MAX_PEER_LINKS,
+	NL80211_MESHCONF_MAX_RETRIES,
+	NL80211_MESHCONF_TTL,
+	NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+	NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+	NL80211_MESHCONF_PATH_REFRESH_TIME,
+	NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+	NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+	NL80211_MESHCONF_HWMP_ROOTMODE,
+	NL80211_MESHCONF_ELEMENT_TTL,
+	NL80211_MESHCONF_HWMP_RANN_INTERVAL,
+	NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
+	NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
+	NL80211_MESHCONF_FORWARDING,
+	NL80211_MESHCONF_RSSI_THRESHOLD,
+	NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
+	NL80211_MESHCONF_HT_OPMODE,
+	NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
+	NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
+	NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
+	NL80211_MESHCONF_POWER_MODE,
+	NL80211_MESHCONF_AWAKE_WINDOW,
+	NL80211_MESHCONF_PLINK_TIMEOUT,
+
+	/* keep last */
+	__NL80211_MESHCONF_ATTR_AFTER_LAST,
+	NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mesh_setup_params - mesh setup parameters
+ *
+ * Mesh setup parameters.  These are used to start/join a mesh and cannot be
+ * changed while the mesh is active.
+ *
+ * @__NL80211_MESH_SETUP_INVALID: Internal use
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
+ *	vendor specific path selection algorithm or disable it to use the
+ *	default HWMP.
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
+ *	vendor specific path metric or disable it to use the default Airtime
+ *	metric.
+ *
+ * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
+ *	robust security network ie, or a vendor specific information element
+ *	that vendors will use to identify the path selection methods and
+ *	metrics in use.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
+ *	daemon will be authenticating mesh candidates.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
+ *	daemon will be securing peer link frames.  AMPE is a secured version of
+ *	Mesh Peering Management (MPM) and is implemented with the assistance of
+ *	a userspace daemon.  When this flag is set, the kernel will send peer
+ *	management frames to a userspace daemon that will implement AMPE
+ *	functionality (security capabilities selection, key confirmation, and
+ *	key management).  When the flag is unset (default), the kernel can
+ *	autonomously complete (unsecured) mesh peering without the need of a
+ *	userspace daemon.
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
+ *	vendor specific synchronization method or disable it to use the default
+ *	neighbor offset synchronization
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
+ *	implement an MPM which handles peer allocation and state.
+ *
+ * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication
+ *	method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE).
+ *	Default is no authentication method required.
+ *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ *
+ * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
+ */
+enum nl80211_mesh_setup_params {
+	__NL80211_MESH_SETUP_INVALID,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
+	NL80211_MESH_SETUP_IE,
+	NL80211_MESH_SETUP_USERSPACE_AUTH,
+	NL80211_MESH_SETUP_USERSPACE_AMPE,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
+	NL80211_MESH_SETUP_USERSPACE_MPM,
+	NL80211_MESH_SETUP_AUTH_PROTOCOL,
+
+	/* keep last */
+	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
+	NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_txq_attr - TX queue parameter attributes
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
+ * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
+ *	disabled
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
+ */
+enum nl80211_txq_attr {
+	__NL80211_TXQ_ATTR_INVALID,
+	NL80211_TXQ_ATTR_AC,
+	NL80211_TXQ_ATTR_TXOP,
+	NL80211_TXQ_ATTR_CWMIN,
+	NL80211_TXQ_ATTR_CWMAX,
+	NL80211_TXQ_ATTR_AIFS,
+
+	/* keep last */
+	__NL80211_TXQ_ATTR_AFTER_LAST,
+	NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
+};
+
+enum nl80211_ac {
+	NL80211_AC_VO,
+	NL80211_AC_VI,
+	NL80211_AC_BE,
+	NL80211_AC_BK,
+	NL80211_NUM_ACS
+};
+
+/* backward compat */
+#define NL80211_TXQ_ATTR_QUEUE	NL80211_TXQ_ATTR_AC
+#define NL80211_TXQ_Q_VO	NL80211_AC_VO
+#define NL80211_TXQ_Q_VI	NL80211_AC_VI
+#define NL80211_TXQ_Q_BE	NL80211_AC_BE
+#define NL80211_TXQ_Q_BK	NL80211_AC_BK
+
+/**
+ * enum nl80211_channel_type - channel type
+ * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel
+ * @NL80211_CHAN_HT20: 20 MHz HT channel
+ * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel
+ *	below the control channel
+ * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel
+ *	above the control channel
+ */
+enum nl80211_channel_type {
+	NL80211_CHAN_NO_HT,
+	NL80211_CHAN_HT20,
+	NL80211_CHAN_HT40MINUS,
+	NL80211_CHAN_HT40PLUS
+};
+
+/**
+ * enum nl80211_chan_width - channel width definitions
+ *
+ * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH
+ * attribute.
+ *
+ * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel
+ * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel
+ * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
+ *	attribute must be provided as well
+ * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
+ *	attribute must be provided as well
+ * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
+ *	and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
+ * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
+ *	attribute must be provided as well
+ * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
+ */
+enum nl80211_chan_width {
+	NL80211_CHAN_WIDTH_20_NOHT,
+	NL80211_CHAN_WIDTH_20,
+	NL80211_CHAN_WIDTH_40,
+	NL80211_CHAN_WIDTH_80,
+	NL80211_CHAN_WIDTH_80P80,
+	NL80211_CHAN_WIDTH_160,
+	NL80211_CHAN_WIDTH_5,
+	NL80211_CHAN_WIDTH_10,
+};
+
+/**
+ * enum nl80211_bss_scan_width - control channel width for a BSS
+ *
+ * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute.
+ *
+ * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible
+ * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide
+ * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide
+ */
+enum nl80211_bss_scan_width {
+	NL80211_BSS_CHAN_WIDTH_20,
+	NL80211_BSS_CHAN_WIDTH_10,
+	NL80211_BSS_CHAN_WIDTH_5,
+};
+
+/**
+ * enum nl80211_bss - netlink attributes for a BSS
+ *
+ * @__NL80211_BSS_INVALID: invalid
+ * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
+ * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
+ * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
+ *	(if @NL80211_BSS_PRESP_DATA is present then this is known to be
+ *	from a probe response, otherwise it may be from the same beacon
+ *	that the NL80211_BSS_BEACON_TSF will be from)
+ * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
+ * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
+ * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
+ *	raw information elements from the probe response/beacon (bin);
+ *	if the %NL80211_BSS_BEACON_IES attribute is present and the data is
+ *	different then the IEs here are from a Probe Response frame; otherwise
+ *	they are from a Beacon frame.
+ *	However, if the driver does not indicate the source of the IEs, these
+ *	IEs may be from either frame subtype.
+ *	If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
+ *	data here is known to be from a probe response, without any heuristics.
+ * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
+ *	in mBm (100 * dBm) (s32)
+ * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
+ *	in unspecified units, scaled to 0..100 (u8)
+ * @NL80211_BSS_STATUS: status, if this BSS is "used"
+ * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
+ * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
+ *	elements from a Beacon frame (bin); not present if no Beacon frame has
+ *	yet been received
+ * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
+ *	(u32, enum nl80211_bss_scan_width)
+ * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)
+ *	(not present if no beacon frame has been received yet)
+ * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
+ *	@NL80211_BSS_TSF is known to be from a probe response (flag attribute)
+ * @__NL80211_BSS_AFTER_LAST: internal
+ * @NL80211_BSS_MAX: highest BSS attribute
+ */
+enum nl80211_bss {
+	__NL80211_BSS_INVALID,
+	NL80211_BSS_BSSID,
+	NL80211_BSS_FREQUENCY,
+	NL80211_BSS_TSF,
+	NL80211_BSS_BEACON_INTERVAL,
+	NL80211_BSS_CAPABILITY,
+	NL80211_BSS_INFORMATION_ELEMENTS,
+	NL80211_BSS_SIGNAL_MBM,
+	NL80211_BSS_SIGNAL_UNSPEC,
+	NL80211_BSS_STATUS,
+	NL80211_BSS_SEEN_MS_AGO,
+	NL80211_BSS_BEACON_IES,
+	NL80211_BSS_CHAN_WIDTH,
+	NL80211_BSS_BEACON_TSF,
+	NL80211_BSS_PRESP_DATA,
+
+	/* keep last */
+	__NL80211_BSS_AFTER_LAST,
+	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_bss_status - BSS "status"
+ * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ *	Note that this is no longer used since cfg80211 no longer
+ *	keeps track of whether or not authentication was done with
+ *	a given BSS.
+ * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
+ * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
+ *
+ * The BSS status is a BSS attribute in scan dumps, which
+ * indicates the status the interface has wrt. this BSS.
+ */
+enum nl80211_bss_status {
+	NL80211_BSS_STATUS_AUTHENTICATED,
+	NL80211_BSS_STATUS_ASSOCIATED,
+	NL80211_BSS_STATUS_IBSS_JOINED,
+};
+
+/**
+ * enum nl80211_auth_type - AuthenticationType
+ *
+ * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
+ * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
+ * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
+ * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
+ * @__NL80211_AUTHTYPE_NUM: internal
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
+ *	trying multiple times); this is invalid in netlink -- leave out
+ *	the attribute for this on CONNECT commands.
+ */
+enum nl80211_auth_type {
+	NL80211_AUTHTYPE_OPEN_SYSTEM,
+	NL80211_AUTHTYPE_SHARED_KEY,
+	NL80211_AUTHTYPE_FT,
+	NL80211_AUTHTYPE_NETWORK_EAP,
+	NL80211_AUTHTYPE_SAE,
+
+	/* keep last */
+	__NL80211_AUTHTYPE_NUM,
+	NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
+	NL80211_AUTHTYPE_AUTOMATIC
+};
+
+/**
+ * enum nl80211_key_type - Key Type
+ * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
+ * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
+ * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
+ * @NUM_NL80211_KEYTYPES: number of defined key types
+ */
+enum nl80211_key_type {
+	NL80211_KEYTYPE_GROUP,
+	NL80211_KEYTYPE_PAIRWISE,
+	NL80211_KEYTYPE_PEERKEY,
+
+	NUM_NL80211_KEYTYPES
+};
+
+/**
+ * enum nl80211_mfp - Management frame protection state
+ * @NL80211_MFP_NO: Management frame protection not used
+ * @NL80211_MFP_REQUIRED: Management frame protection required
+ */
+enum nl80211_mfp {
+	NL80211_MFP_NO,
+	NL80211_MFP_REQUIRED,
+};
+
+enum nl80211_wpa_versions {
+	NL80211_WPA_VERSION_1 = 1 << 0,
+	NL80211_WPA_VERSION_2 = 1 << 1,
+};
+
+/**
+ * enum nl80211_key_default_types - key default types
+ * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
+ * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
+ *	unicast key
+ * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
+ *	multicast key
+ * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
+ */
+enum nl80211_key_default_types {
+	__NL80211_KEY_DEFAULT_TYPE_INVALID,
+	NL80211_KEY_DEFAULT_TYPE_UNICAST,
+	NL80211_KEY_DEFAULT_TYPE_MULTICAST,
+
+	NUM_NL80211_KEY_DEFAULT_TYPES
+};
+
+/**
+ * enum nl80211_key_attributes - key attributes
+ * @__NL80211_KEY_INVALID: invalid
+ * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
+ *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ *	keys
+ * @NL80211_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ *	section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ *	CCMP keys, each six bytes in little endian
+ * @NL80211_KEY_DEFAULT: flag indicating default key
+ * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
+ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
+ *	specified the default depends on whether a MAC address was
+ *	given with the command using the key or not (u32)
+ * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ *	attributes, specifying what a key should be set as default as.
+ *	See &enum nl80211_key_default_types.
+ * @__NL80211_KEY_AFTER_LAST: internal
+ * @NL80211_KEY_MAX: highest key attribute
+ */
+enum nl80211_key_attributes {
+	__NL80211_KEY_INVALID,
+	NL80211_KEY_DATA,
+	NL80211_KEY_IDX,
+	NL80211_KEY_CIPHER,
+	NL80211_KEY_SEQ,
+	NL80211_KEY_DEFAULT,
+	NL80211_KEY_DEFAULT_MGMT,
+	NL80211_KEY_TYPE,
+	NL80211_KEY_DEFAULT_TYPES,
+
+	/* keep last */
+	__NL80211_KEY_AFTER_LAST,
+	NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_tx_rate_attributes - TX rate set attributes
+ * @__NL80211_TXRATE_INVALID: invalid
+ * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
+ *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
+ *	1 = 500 kbps) but without the IE length restriction (at most
+ *	%NL80211_MAX_SUPP_RATES in a single array).
+ * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection
+ *	in an array of MCS numbers.
+ * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
+ *	see &struct nl80211_txrate_vht
+ * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
+ * @__NL80211_TXRATE_AFTER_LAST: internal
+ * @NL80211_TXRATE_MAX: highest TX rate attribute
+ */
+enum nl80211_tx_rate_attributes {
+	__NL80211_TXRATE_INVALID,
+	NL80211_TXRATE_LEGACY,
+	NL80211_TXRATE_HT,
+	NL80211_TXRATE_VHT,
+	NL80211_TXRATE_GI,
+
+	/* keep last */
+	__NL80211_TXRATE_AFTER_LAST,
+	NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
+};
+
+#define NL80211_TXRATE_MCS NL80211_TXRATE_HT
+#define NL80211_VHT_NSS_MAX		8
+
+/**
+ * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap
+ * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
+ */
+struct nl80211_txrate_vht {
+	__u16 mcs[NL80211_VHT_NSS_MAX];
+};
+
+enum nl80211_txrate_gi {
+	NL80211_TXRATE_DEFAULT_GI,
+	NL80211_TXRATE_FORCE_SGI,
+	NL80211_TXRATE_FORCE_LGI,
+};
+
+/**
+ * enum nl80211_band - Frequency band
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+ * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
+ * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
+ */
+enum nl80211_band {
+	NL80211_BAND_2GHZ,
+	NL80211_BAND_5GHZ,
+	NL80211_BAND_60GHZ,
+};
+
+/**
+ * enum nl80211_ps_state - powersave state
+ * @NL80211_PS_DISABLED: powersave is disabled
+ * @NL80211_PS_ENABLED: powersave is enabled
+ */
+enum nl80211_ps_state {
+	NL80211_PS_DISABLED,
+	NL80211_PS_ENABLED,
+};
+
+/**
+ * enum nl80211_attr_cqm - connection quality monitor attributes
+ * @__NL80211_ATTR_CQM_INVALID: invalid
+ * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
+ *	the threshold for the RSSI level at which an event will be sent. Zero
+ *	to disable.
+ * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
+ *	the minimum amount the RSSI level must change after an event before a
+ *	new event may be issued (to reduce effects of RSSI oscillation).
+ * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
+ * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
+ *	consecutive packets were not acknowledged by the peer
+ * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures
+ *	during the given %NL80211_ATTR_CQM_TXE_INTVL before an
+ *	%NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and
+ *	%NL80211_ATTR_CQM_TXE_PKTS is generated.
+ * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given
+ *	%NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is
+ *	checked.
+ * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic
+ *	interval in which %NL80211_ATTR_CQM_TXE_PKTS and
+ *	%NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
+ *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
+ * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
+ *	loss event
+ * @__NL80211_ATTR_CQM_AFTER_LAST: internal
+ * @NL80211_ATTR_CQM_MAX: highest key attribute
+ */
+enum nl80211_attr_cqm {
+	__NL80211_ATTR_CQM_INVALID,
+	NL80211_ATTR_CQM_RSSI_THOLD,
+	NL80211_ATTR_CQM_RSSI_HYST,
+	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
+	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
+	NL80211_ATTR_CQM_TXE_RATE,
+	NL80211_ATTR_CQM_TXE_PKTS,
+	NL80211_ATTR_CQM_TXE_INTVL,
+	NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
+
+	/* keep last */
+	__NL80211_ATTR_CQM_AFTER_LAST,
+	NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
+ *      configured threshold
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
+ *      configured threshold
+ * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent)
+ */
+enum nl80211_cqm_rssi_threshold_event {
+	NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
+	NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
+	NL80211_CQM_RSSI_BEACON_LOSS_EVENT,
+};
+
+
+/**
+ * enum nl80211_tx_power_setting - TX power adjustment
+ * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
+ * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
+ * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
+ */
+enum nl80211_tx_power_setting {
+	NL80211_TX_POWER_AUTOMATIC,
+	NL80211_TX_POWER_LIMITED,
+	NL80211_TX_POWER_FIXED,
+};
+
+/**
+ * enum nl80211_packet_pattern_attr - packet pattern attribute
+ * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
+ *	a zero bit are ignored
+ * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have
+ *	a bit for each byte in the pattern. The lowest-order bit corresponds
+ *	to the first byte of the pattern, but the bytes of the pattern are
+ *	in a little-endian-like format, i.e. the 9th byte of the pattern
+ *	corresponds to the lowest-order bit in the second byte of the mask.
+ *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
+ *	xx indicates "don't care") would be represented by a pattern of
+ *	twelve zero bytes, and a mask of "0xed,0x01".
+ *	Note that the pattern matching is done as though frames were not
+ *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+ *	first (including SNAP header unpacking) and then matched.
+ * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after
+ *	these fixed number of bytes of received packet
+ * @NUM_NL80211_PKTPAT: number of attributes
+ * @MAX_NL80211_PKTPAT: max attribute number
+ */
+enum nl80211_packet_pattern_attr {
+	__NL80211_PKTPAT_INVALID,
+	NL80211_PKTPAT_MASK,
+	NL80211_PKTPAT_PATTERN,
+	NL80211_PKTPAT_OFFSET,
+
+	NUM_NL80211_PKTPAT,
+	MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1,
+};
+
+/**
+ * struct nl80211_pattern_support - packet pattern support information
+ * @max_patterns: maximum number of patterns supported
+ * @min_pattern_len: minimum length of each pattern
+ * @max_pattern_len: maximum length of each pattern
+ * @max_pkt_offset: maximum Rx packet offset
+ *
+ * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in
+ * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of
+ * %NL80211_ATTR_COALESCE_RULE in the capability information given
+ * by the kernel to userspace.
+ */
+struct nl80211_pattern_support {
+	__u32 max_patterns;
+	__u32 min_pattern_len;
+	__u32 max_pattern_len;
+	__u32 max_pkt_offset;
+} __attribute__((packed));
+
+/* only for backward compatibility */
+#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID
+#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK
+#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN
+#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET
+#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT
+#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT
+#define nl80211_wowlan_pattern_support nl80211_pattern_support
+
+/**
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
+ *	the chip into a special state -- works best with chips that have
+ *	support for low-power operation already (flag)
+ *	Note that this mode is incompatible with all of the others, if
+ *	any others are even supported by the device.
+ * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
+ *	is detected is implementation-specific (flag)
+ * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
+ *	by 16 repetitions of MAC addr, anywhere in payload) (flag)
+ * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
+ *	which are passed in an array of nested attributes, each nested attribute
+ *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
+ *	Each pattern defines a wakeup packet. Packet offset is associated with
+ *	each pattern which is used while matching the pattern. The matching is
+ *	done on the MSDU, i.e. as though the packet was an 802.3 packet, so the
+ *	pattern matching is done after the packet is converted to the MSDU.
+ *
+ *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+ *	carrying a &struct nl80211_pattern_support.
+ *
+ *	When reporting wakeup. it is a u32 attribute containing the 0-based
+ *	index of the pattern that caused the wakeup, in the patterns passed
+ *	to the kernel when configuring.
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
+ *	used when setting, used only to indicate that GTK rekeying is supported
+ *	by the device (flag)
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
+ *	done by the device) (flag)
+ * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
+ *	packet (flag)
+ * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
+ * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
+ *	(on devices that have rfkill in the device) (flag)
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains
+ *	the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame
+ *	may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN
+ *	attribute contains the original length.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11
+ *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211
+ *	attribute if the packet was truncated somewhere.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the
+ *	802.11 packet that caused the wakeup, e.g. a magic packet. The frame may
+ *	be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
+ *	contains the original length.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3
+ *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023
+ *	attribute if the packet was truncated somewhere.
+ * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section
+ *	"TCP connection wakeup" for more details. This is a nested attribute
+ *	containing the exact information for establishing and keeping alive
+ *	the TCP connection.
+ * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
+ *	wakeup packet was received on the TCP connection
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
+ *	TCP connection was lost or failed to be established
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
+ *	the TCP connection ran out of tokens to use for data to send to the
+ *	service
+ * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
+ *	is detected.  This is a nested attribute that contains the
+ *	same attributes used with @NL80211_CMD_START_SCHED_SCAN.  It
+ *	specifies how the scan is performed (e.g. the interval, the
+ *	channels to scan and the initial delay) as well as the scan
+ *	results that will trigger a wake (i.e. the matchsets).  This
+ *	attribute is also sent in a response to
+ *	@NL80211_CMD_GET_WIPHY, indicating the number of match sets
+ *	supported by the driver (u32).
+ * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
+ *	containing an array with information about what triggered the
+ *	wake up.  If no elements are present in the array, it means
+ *	that the information is not available.  If more than one
+ *	element is present, it means that more than one match
+ *	occurred.
+ *	Each element in the array is a nested attribute that contains
+ *	one optional %NL80211_ATTR_SSID attribute and one optional
+ *	%NL80211_ATTR_SCAN_FREQUENCIES attribute.  At least one of
+ *	these attributes must be present.  If
+ *	%NL80211_ATTR_SCAN_FREQUENCIES contains more than one
+ *	frequency, it means that the match occurred in more than one
+ *	channel.
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ *
+ * These nested attributes are used to configure the wakeup triggers and
+ * to report the wakeup reason(s).
+ */
+enum nl80211_wowlan_triggers {
+	__NL80211_WOWLAN_TRIG_INVALID,
+	NL80211_WOWLAN_TRIG_ANY,
+	NL80211_WOWLAN_TRIG_DISCONNECT,
+	NL80211_WOWLAN_TRIG_MAGIC_PKT,
+	NL80211_WOWLAN_TRIG_PKT_PATTERN,
+	NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
+	NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
+	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
+	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
+	NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN,
+	NL80211_WOWLAN_TRIG_TCP_CONNECTION,
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
+	NL80211_WOWLAN_TRIG_NET_DETECT,
+	NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
+
+	/* keep last */
+	NUM_NL80211_WOWLAN_TRIG,
+	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
+};
+
+/**
+ * DOC: TCP connection wakeup
+ *
+ * Some devices can establish a TCP connection in order to be woken up by a
+ * packet coming in from outside their network segment, or behind NAT. If
+ * configured, the device will establish a TCP connection to the given
+ * service, and periodically send data to that service. The first data
+ * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK.
+ * The data packets can optionally include a (little endian) sequence
+ * number (in the TCP payload!) that is generated by the device, and, also
+ * optionally, a token from a list of tokens. This serves as a keep-alive
+ * with the service, and for NATed connections, etc.
+ *
+ * During this keep-alive period, the server doesn't send any data to the
+ * client. When receiving data, it is compared against the wakeup pattern
+ * (and mask) and if it matches, the host is woken up. Similarly, if the
+ * connection breaks or cannot be established to start with, the host is
+ * also woken up.
+ *
+ * Developer's note: ARP offload is required for this, otherwise TCP
+ * response packets might not go through correctly.
+ */
+
+/**
+ * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence
+ * @start: starting value
+ * @offset: offset of sequence number in packet
+ * @len: length of the sequence value to write, 1 through 4
+ *
+ * Note: don't confuse with the TCP sequence number(s), this is for the
+ * keepalive packet payload. The actual value is written into the packet
+ * in little endian.
+ */
+struct nl80211_wowlan_tcp_data_seq {
+	__u32 start, offset, len;
+};
+
+/**
+ * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config
+ * @offset: offset of token in packet
+ * @len: length of each token
+ * @token_stream: stream of data to be used for the tokens, the length must
+ *	be a multiple of @len for this to make sense
+ */
+struct nl80211_wowlan_tcp_data_token {
+	__u32 offset, len;
+	__u8 token_stream[];
+};
+
+/**
+ * struct nl80211_wowlan_tcp_data_token_feature - data token features
+ * @min_len: minimum token length
+ * @max_len: maximum token length
+ * @bufsize: total available token buffer size (max size of @token_stream)
+ */
+struct nl80211_wowlan_tcp_data_token_feature {
+	__u32 min_len, max_len, bufsize;
+};
+
+/**
+ * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters
+ * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order)
+ * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address
+ *	(in network byte order)
+ * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because
+ *	route lookup when configured might be invalid by the time we suspend,
+ *	and doing a route lookup when suspending is no longer possible as it
+ *	might require ARP querying.
+ * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a
+ *	socket and port will be allocated
+ * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16)
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte.
+ *	For feature advertising, a u32 attribute holding the maximum length
+ *	of the data payload.
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration
+ *	(if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature
+ *	advertising it is just a flag
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration,
+ *	see &struct nl80211_wowlan_tcp_data_token and for advertising see
+ *	&struct nl80211_wowlan_tcp_data_token_feature.
+ * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum
+ *	interval in feature advertising (u32)
+ * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
+ *	u32 attribute holding the maximum length
+ * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
+ *	feature advertising. The mask works like @NL80211_PKTPAT_MASK
+ *	but on the TCP payload only.
+ * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
+ * @MAX_NL80211_WOWLAN_TCP: highest attribute number
+ */
+enum nl80211_wowlan_tcp_attrs {
+	__NL80211_WOWLAN_TCP_INVALID,
+	NL80211_WOWLAN_TCP_SRC_IPV4,
+	NL80211_WOWLAN_TCP_DST_IPV4,
+	NL80211_WOWLAN_TCP_DST_MAC,
+	NL80211_WOWLAN_TCP_SRC_PORT,
+	NL80211_WOWLAN_TCP_DST_PORT,
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD,
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ,
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
+	NL80211_WOWLAN_TCP_DATA_INTERVAL,
+	NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
+	NL80211_WOWLAN_TCP_WAKE_MASK,
+
+	/* keep last */
+	NUM_NL80211_WOWLAN_TCP,
+	MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1
+};
+
+/**
+ * struct nl80211_coalesce_rule_support - coalesce rule support information
+ * @max_rules: maximum number of rules supported
+ * @pat: packet pattern support information
+ * @max_delay: maximum supported coalescing delay in msecs
+ *
+ * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_coalesce_rule_support {
+	__u32 max_rules;
+	struct nl80211_pattern_support pat;
+	__u32 max_delay;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_attr_coalesce_rule - coalesce rule attribute
+ * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute
+ * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing
+ * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence,
+ *	see &enum nl80211_coalesce_condition.
+ * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched
+ *	after these fixed number of bytes of received packet
+ * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes
+ * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number
+ */
+enum nl80211_attr_coalesce_rule {
+	__NL80211_COALESCE_RULE_INVALID,
+	NL80211_ATTR_COALESCE_RULE_DELAY,
+	NL80211_ATTR_COALESCE_RULE_CONDITION,
+	NL80211_ATTR_COALESCE_RULE_PKT_PATTERN,
+
+	/* keep last */
+	NUM_NL80211_ATTR_COALESCE_RULE,
+	NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1
+};
+
+/**
+ * enum nl80211_coalesce_condition - coalesce rule conditions
+ * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
+ *	in a rule are matched.
+ * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
+ *	in a rule are not matched.
+ */
+enum nl80211_coalesce_condition {
+	NL80211_COALESCE_CONDITION_MATCH,
+	NL80211_COALESCE_CONDITION_NO_MATCH
+};
+
+/**
+ * enum nl80211_iface_limit_attrs - limit attributes
+ * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
+ * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
+ *	can be chosen from this set of interface types (u32)
+ * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
+ *	flag attribute for each interface type in this set
+ * @NUM_NL80211_IFACE_LIMIT: number of attributes
+ * @MAX_NL80211_IFACE_LIMIT: highest attribute number
+ */
+enum nl80211_iface_limit_attrs {
+	NL80211_IFACE_LIMIT_UNSPEC,
+	NL80211_IFACE_LIMIT_MAX,
+	NL80211_IFACE_LIMIT_TYPES,
+
+	/* keep last */
+	NUM_NL80211_IFACE_LIMIT,
+	MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
+};
+
+/**
+ * enum nl80211_if_combination_attrs -- interface combination attributes
+ *
+ * @NL80211_IFACE_COMB_UNSPEC: (reserved)
+ * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
+ *	for given interface types, see &enum nl80211_iface_limit_attrs.
+ * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
+ *	interfaces that can be created in this group. This number doesn't
+ *	apply to interfaces purely managed in software, which are listed
+ *	in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
+ * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
+ *	beacon intervals within this group must be all the same even for
+ *	infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
+ *	the infrastructure network's beacon interval.
+ * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
+ *	different channels may be used within this group.
+ * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
+ *	of supported channel widths for radar detection.
+ * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
+ *	of supported regulatory regions for radar detection.
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+ * Examples:
+ *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
+ *	=> allows an AP and a STA that must match BIs
+ *
+ *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
+ *	=> allows 8 of AP/GO
+ *
+ *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
+ *	=> allows two STAs on different channels
+ *
+ *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
+ *	=> allows a STA plus three P2P interfaces
+ *
+ * The list of these four possiblities could completely be contained
+ * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
+ * that any of these groups must match.
+ *
+ * "Combinations" of just a single interface will not be listed here,
+ * a single interface of any valid interface type is assumed to always
+ * be possible by itself. This means that implicitly, for each valid
+ * interface type, the following group always exists:
+ *	numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
+ */
+enum nl80211_if_combination_attrs {
+	NL80211_IFACE_COMB_UNSPEC,
+	NL80211_IFACE_COMB_LIMITS,
+	NL80211_IFACE_COMB_MAXNUM,
+	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
+	NL80211_IFACE_COMB_NUM_CHANNELS,
+	NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
+	NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
+
+	/* keep last */
+	NUM_NL80211_IFACE_COMB,
+	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
+};
+
+
+/**
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine
+ *
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit
+ *	state of non existant mesh peer links
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
+ *	this mesh peer
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
+ *	from this mesh peer
+ * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
+ *	received from this mesh peer
+ * @NL80211_PLINK_ESTAB: mesh peer link is established
+ * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
+ *	plink are discarded
+ * @NUM_NL80211_PLINK_STATES: number of peer link states
+ * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
+ */
+enum nl80211_plink_state {
+	NL80211_PLINK_LISTEN,
+	NL80211_PLINK_OPN_SNT,
+	NL80211_PLINK_OPN_RCVD,
+	NL80211_PLINK_CNF_RCVD,
+	NL80211_PLINK_ESTAB,
+	NL80211_PLINK_HOLDING,
+	NL80211_PLINK_BLOCKED,
+
+	/* keep last */
+	NUM_NL80211_PLINK_STATES,
+	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
+};
+
+/**
+ * enum nl80211_plink_action - actions to perform in mesh peers
+ *
+ * @NL80211_PLINK_ACTION_NO_ACTION: perform no action
+ * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment
+ * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
+ * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
+ */
+enum plink_actions {
+	NL80211_PLINK_ACTION_NO_ACTION,
+	NL80211_PLINK_ACTION_OPEN,
+	NL80211_PLINK_ACTION_BLOCK,
+
+	NUM_NL80211_PLINK_ACTIONS,
+};
+
+
+#define NL80211_KCK_LEN			16
+#define NL80211_KEK_LEN			16
+#define NL80211_REPLAY_CTR_LEN		8
+
+/**
+ * enum nl80211_rekey_data - attributes for GTK rekey offload
+ * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
+ * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
+ * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
+ * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
+ * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
+ * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
+ */
+enum nl80211_rekey_data {
+	__NL80211_REKEY_DATA_INVALID,
+	NL80211_REKEY_DATA_KEK,
+	NL80211_REKEY_DATA_KCK,
+	NL80211_REKEY_DATA_REPLAY_CTR,
+
+	/* keep last */
+	NUM_NL80211_REKEY_DATA,
+	MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
+};
+
+/**
+ * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
+ * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
+ *	Beacon frames)
+ * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
+ *	in Beacon frames
+ * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
+ *	element in Beacon frames but zero out each byte in the SSID
+ */
+enum nl80211_hidden_ssid {
+	NL80211_HIDDEN_SSID_NOT_IN_USE,
+	NL80211_HIDDEN_SSID_ZERO_LEN,
+	NL80211_HIDDEN_SSID_ZERO_CONTENTS
+};
+
+/**
+ * enum nl80211_sta_wme_attr - station WME attributes
+ * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
+ * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
+ *	is the same as the AC bitmap in the QoS info field.
+ * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
+ *	as the MAX_SP field in the QoS info field (but already shifted down).
+ * @__NL80211_STA_WME_AFTER_LAST: internal
+ * @NL80211_STA_WME_MAX: highest station WME attribute
+ */
+enum nl80211_sta_wme_attr {
+	__NL80211_STA_WME_INVALID,
+	NL80211_STA_WME_UAPSD_QUEUES,
+	NL80211_STA_WME_MAX_SP,
+
+	/* keep last */
+	__NL80211_STA_WME_AFTER_LAST,
+	NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
+ * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
+ * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
+ *	priority)
+ * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
+ * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
+ * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
+ *	(internal)
+ * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
+ *	(internal)
+ */
+enum nl80211_pmksa_candidate_attr {
+	__NL80211_PMKSA_CANDIDATE_INVALID,
+	NL80211_PMKSA_CANDIDATE_INDEX,
+	NL80211_PMKSA_CANDIDATE_BSSID,
+	NL80211_PMKSA_CANDIDATE_PREAUTH,
+
+	/* keep last */
+	NUM_NL80211_PMKSA_CANDIDATE,
+	MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
+};
+
+/**
+ * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
+ * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
+ * @NL80211_TDLS_SETUP: Setup TDLS link
+ * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
+ * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
+ * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
+ */
+enum nl80211_tdls_operation {
+	NL80211_TDLS_DISCOVERY_REQ,
+	NL80211_TDLS_SETUP,
+	NL80211_TDLS_TEARDOWN,
+	NL80211_TDLS_ENABLE_LINK,
+	NL80211_TDLS_DISABLE_LINK,
+};
+
+/*
+ * enum nl80211_ap_sme_features - device-integrated AP features
+ * Reserved for future use, no bits are defined in
+ * NL80211_ATTR_DEVICE_AP_SME yet.
+enum nl80211_ap_sme_features {
+};
+ */
+
+/**
+ * enum nl80211_feature_flags - device/driver features
+ * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
+ *	TX status to the socket error queue when requested with the
+ *	socket option.
+ * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
+ * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
+ *	the connected inactive stations in AP mode.
+ * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
+ *	to work properly to suppport receiving regulatory hints from
+ *	cellular base stations.
+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only
+ *	here to reserve the value for API/ABI compatibility)
+ * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
+ *	equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
+ *	mode
+ * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan
+ * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported
+ * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif
+ * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting
+ * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform
+ *	OBSS scans and generate 20/40 BSS coex reports. This flag is used only
+ *	for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied.
+ * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window
+ *	setting
+ * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic
+ *	powersave
+ * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state
+ *	transitions for AP clients. Without this flag (and if the driver
+ *	doesn't have the AP SME in the device) the driver supports adding
+ *	stations only when they're associated and adds them in associated
+ *	state (to later be transitioned into authorized), with this flag
+ *	they should be added before even sending the authentication reply
+ *	and then transitioned into authenticated, associated and authorized
+ *	states using station flags.
+ *	Note that even for drivers that support this, the default is to add
+ *	stations in authenticated/associated state, so to add unauthenticated
+ *	stations the authenticated/associated bits have to be set in the mask.
+ * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits
+ *	(HT40, VHT 80/160 MHz) if this flag is set
+ * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh
+ *	Peering Management entity which may be implemented by registering for
+ *	beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
+ *	still generated by the driver.
+ * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor
+ *	interface. An active monitor interface behaves like a normal monitor
+ *	interface, but gets added to the driver. It ensures that incoming
+ *	unicast packets directed at the configured interface address get ACKed.
+ * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
+ *	channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
+ *	lifetime of a BSS.
+ * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter
+ *	Set IE to probe requests.
+ * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE
+ *	to probe requests.
+ * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period
+ *	requests sent to it by an AP.
+ * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the
+ *	current tx power value into the TPC Report IE in the spectrum
+ *	management TPC Report action frame, and in the Radio Measurement Link
+ *	Measurement Report action frame.
+ * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout
+ *	estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
+ *	to enable dynack.
+ * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial
+ *	multiplexing powersave, ie. can turn off all but one chain
+ *	even on HT connections that should be using more chains.
+ * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial
+ *	multiplexing powersave, ie. can turn off all but one chain
+ *	and then wake the rest up as required after, for example,
+ *	rts/cts handshake.
+ * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
+ *	TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS
+ *	command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
+ *	needs to be able to handle Block-Ack agreements and other things.
+ * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring
+ *	the vif's MAC address upon creation.
+ *	See 'macaddr' field in the vif_params (cfg80211.h).
+ * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when
+ *	operating as a TDLS peer.
+ * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a
+ *	random MAC address during scan (if the device is unassociated); the
+ *	%NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC
+ *	address mask/value will be used.
+ * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports
+ *	using a random MAC address for every scan iteration during scheduled
+ *	scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may
+ *	be set for scheduled scan and the MAC address mask/value will be used.
+ * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a
+ *	random MAC address for every scan iteration during "net detect", i.e.
+ *	scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may
+ *	be set for scheduled scan and the MAC address mask/value will be used.
+ */
+enum nl80211_feature_flags {
+	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
+	NL80211_FEATURE_HT_IBSS				= 1 << 1,
+	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
+	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
+	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
+	NL80211_FEATURE_SAE				= 1 << 5,
+	NL80211_FEATURE_LOW_PRIORITY_SCAN		= 1 << 6,
+	NL80211_FEATURE_SCAN_FLUSH			= 1 << 7,
+	NL80211_FEATURE_AP_SCAN				= 1 << 8,
+	NL80211_FEATURE_VIF_TXPOWER			= 1 << 9,
+	NL80211_FEATURE_NEED_OBSS_SCAN			= 1 << 10,
+	NL80211_FEATURE_P2P_GO_CTWIN			= 1 << 11,
+	NL80211_FEATURE_P2P_GO_OPPPS			= 1 << 12,
+	/* bit 13 is reserved */
+	NL80211_FEATURE_ADVERTISE_CHAN_LIMITS		= 1 << 14,
+	NL80211_FEATURE_FULL_AP_CLIENT_STATE		= 1 << 15,
+	NL80211_FEATURE_USERSPACE_MPM			= 1 << 16,
+	NL80211_FEATURE_ACTIVE_MONITOR			= 1 << 17,
+	NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE	= 1 << 18,
+	NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES	= 1 << 19,
+	NL80211_FEATURE_WFA_TPC_IE_IN_PROBES		= 1 << 20,
+	NL80211_FEATURE_QUIET				= 1 << 21,
+	NL80211_FEATURE_TX_POWER_INSERTION		= 1 << 22,
+	NL80211_FEATURE_ACKTO_ESTIMATION		= 1 << 23,
+	NL80211_FEATURE_STATIC_SMPS			= 1 << 24,
+	NL80211_FEATURE_DYNAMIC_SMPS			= 1 << 25,
+	NL80211_FEATURE_SUPPORTS_WMM_ADMISSION		= 1 << 26,
+	NL80211_FEATURE_MAC_ON_CREATE			= 1 << 27,
+	NL80211_FEATURE_TDLS_CHANNEL_SWITCH		= 1 << 28,
+	NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR		= 1 << 29,
+	NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR	= 1 << 30,
+	NL80211_FEATURE_ND_RANDOM_MAC_ADDR		= 1 << 31,
+};
+
+/**
+ * enum nl80211_ext_feature_index - bit index of extended features.
+ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
+ *
+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+ */
+enum nl80211_ext_feature_index {
+	NL80211_EXT_FEATURE_VHT_IBSS,
+
+	/* add new features before the definition below */
+	NUM_NL80211_EXT_FEATURES,
+	MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
+};
+
+/**
+ * enum nl80211_probe_resp_offload_support_attr - optional supported
+ *	protocols for probe-response offloading by the driver/FW.
+ *	To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
+ *	Each enum value represents a bit in the bitmap of supported
+ *	protocols. Typically a subset of probe-requests belonging to a
+ *	supported protocol will be excluded from offload and uploaded
+ *	to the host.
+ *
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
+ */
+enum nl80211_probe_resp_offload_support_attr {
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =	1<<0,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =	1<<1,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =	1<<2,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =	1<<3,
+};
+
+/**
+ * enum nl80211_connect_failed_reason - connection request failed reasons
+ * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
+ *	handled by the AP is reached.
+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
+ */
+enum nl80211_connect_failed_reason {
+	NL80211_CONN_FAIL_MAX_CLIENTS,
+	NL80211_CONN_FAIL_BLOCKED_CLIENT,
+};
+
+/**
+ * enum nl80211_scan_flags -  scan request control flags
+ *
+ * Scan request control flags are used to control the handling
+ * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
+ * requests.
+ *
+ * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
+ * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
+ * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
+ *	as AP and the beaconing has already been configured. This attribute is
+ *	dangerous because will destroy stations performance as a lot of frames
+ *	will be lost while scanning off-channel, therefore it must be used only
+ *	when really needed
+ * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or
+ *	for scheduled scan: a different one for every scan iteration). When the
+ *	flag is set, depending on device capabilities the @NL80211_ATTR_MAC and
+ *	@NL80211_ATTR_MAC_MASK attributes may also be given in which case only
+ *	the masked bits will be preserved from the MAC address and the remainder
+ *	randomised. If the attributes are not given full randomisation (46 bits,
+ *	locally administered 1, multicast 0) is assumed.
+ *	This flag must not be requested when the feature isn't supported, check
+ *	the nl80211 feature flags for the device.
+ */
+enum nl80211_scan_flags {
+	NL80211_SCAN_FLAG_LOW_PRIORITY			= 1<<0,
+	NL80211_SCAN_FLAG_FLUSH				= 1<<1,
+	NL80211_SCAN_FLAG_AP				= 1<<2,
+	NL80211_SCAN_FLAG_RANDOM_ADDR			= 1<<3,
+};
+
+/**
+ * enum nl80211_acl_policy - access control policy
+ *
+ * Access control policy is applied on a MAC list set by
+ * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
+ * be used with %NL80211_ATTR_ACL_POLICY.
+ *
+ * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
+ *	listed in ACL, i.e. allow all the stations which are not listed
+ *	in ACL to authenticate.
+ * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
+ *	in ACL, i.e. deny all the stations which are not listed in ACL.
+ */
+enum nl80211_acl_policy {
+	NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
+	NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
+};
+
+/**
+ * enum nl80211_smps_mode - SMPS mode
+ *
+ * Requested SMPS mode (for AP mode)
+ *
+ * @NL80211_SMPS_OFF: SMPS off (use all antennas).
+ * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
+ * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
+ *	turn on other antennas after CTS/RTS).
+ */
+enum nl80211_smps_mode {
+	NL80211_SMPS_OFF,
+	NL80211_SMPS_STATIC,
+	NL80211_SMPS_DYNAMIC,
+
+	__NL80211_SMPS_AFTER_LAST,
+	NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_radar_event - type of radar event for DFS operation
+ *
+ * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
+ * about detected radars or success of the channel available check (CAC)
+ *
+ * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is
+ *	now unusable.
+ * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished,
+ *	the channel is now available.
+ * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no
+ *	change to the channel status.
+ * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
+ *	over, channel becomes usable.
+ */
+enum nl80211_radar_event {
+	NL80211_RADAR_DETECTED,
+	NL80211_RADAR_CAC_FINISHED,
+	NL80211_RADAR_CAC_ABORTED,
+	NL80211_RADAR_NOP_FINISHED,
+};
+
+/**
+ * enum nl80211_dfs_state - DFS states for channels
+ *
+ * Channel states used by the DFS code.
+ *
+ * @NL80211_DFS_USABLE: The channel can be used, but channel availability
+ *	check (CAC) must be performed before using it for AP or IBSS.
+ * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it
+ *	is therefore marked as not available.
+ * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available.
+ */
+enum nl80211_dfs_state {
+	NL80211_DFS_USABLE,
+	NL80211_DFS_UNAVAILABLE,
+	NL80211_DFS_AVAILABLE,
+};
+
+/**
+ * enum enum nl80211_protocol_features - nl80211 protocol features
+ * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting
+ *	wiphy dumps (if requested by the application with the attribute
+ *	%NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the
+ *	wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or
+ *	%NL80211_ATTR_WDEV.
+ */
+enum nl80211_protocol_features {
+	NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP =	1 << 0,
+};
+
+/**
+ * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers
+ *
+ * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified.
+ * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol.
+ * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol.
+ * @NL80211_CRIT_PROTO_APIPA: APIPA protocol.
+ * @NUM_NL80211_CRIT_PROTO: must be kept last.
+ */
+enum nl80211_crit_proto_id {
+	NL80211_CRIT_PROTO_UNSPEC,
+	NL80211_CRIT_PROTO_DHCP,
+	NL80211_CRIT_PROTO_EAPOL,
+	NL80211_CRIT_PROTO_APIPA,
+	/* add other protocols before this one */
+	NUM_NL80211_CRIT_PROTO
+};
+
+/* maximum duration for critical protocol measures */
+#define NL80211_CRIT_PROTO_MAX_DURATION		5000 /* msec */
+
+/**
+ * enum nl80211_rxmgmt_flags - flags for received management frame.
+ *
+ * Used by cfg80211_rx_mgmt()
+ *
+ * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.
+ */
+enum nl80211_rxmgmt_flags {
+	NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
+};
+
+/*
+ * If this flag is unset, the lower 24 bits are an OUI, if set
+ * a Linux nl80211 vendor ID is used (no such IDs are allocated
+ * yet, so that's not valid so far)
+ */
+#define NL80211_VENDOR_ID_IS_LINUX	0x80000000
+
+/**
+ * struct nl80211_vendor_cmd_info - vendor command data
+ * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the
+ *	value is a 24-bit OUI; if it is set then a separately allocated ID
+ *	may be used, but no such IDs are allocated yet. New IDs should be
+ *	added to this file when needed.
+ * @subcmd: sub-command ID for the command
+ */
+struct nl80211_vendor_cmd_info {
+	__u32 vendor_id;
+	__u32 subcmd;
+};
+
+/**
+ * enum nl80211_tdls_peer_capability - TDLS peer flags.
+ *
+ * Used by tdls_mgmt() to determine which conditional elements need
+ * to be added to TDLS Setup frames.
+ *
+ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
+ */
+enum nl80211_tdls_peer_capability {
+	NL80211_TDLS_PEER_HT = 1<<0,
+	NL80211_TDLS_PEER_VHT = 1<<1,
+	NL80211_TDLS_PEER_WMM = 1<<2,
+};
+
+#endif /* __LINUX_NL80211_H */