Update upstream source from tag 'upstream/0.9.1'

Update to upstream version '0.9.1'
with Debian dir 559193b433abdd46788bc66e02edda248b928278

1 files changed, 1057 insertions, 41 deletions

diff --git a/nl80211.h b/nl80211.h
index 241220c..15daf5e 100644
--- a/nl80211.h
+++ b/nl80211.h
@@ -10,6 +10,7 @@
  * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ * Copyright 2015-2017	Intel Deutschland GmbH
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -47,6 +48,7 @@
 #define NL80211_MULTICAST_GROUP_REG		"regulatory"
 #define NL80211_MULTICAST_GROUP_MLME		"mlme"
 #define NL80211_MULTICAST_GROUP_VENDOR		"vendor"
+#define NL80211_MULTICAST_GROUP_NAN		"nan"
 #define NL80211_MULTICAST_GROUP_TESTMODE	"testmode"
 
 /**
@@ -171,6 +173,65 @@
  */
 
 /**
+ * DOC: WPA/WPA2 EAPOL handshake offload
+ *
+ * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers
+ * can indicate they support offloading EAPOL handshakes for WPA/WPA2
+ * preshared key authentication. In %NL80211_CMD_CONNECT the preshared
+ * key should be specified using %NL80211_ATTR_PMK. Drivers supporting
+ * this offload may reject the %NL80211_CMD_CONNECT when no preshared
+ * key material is provided, for example when that driver does not
+ * support setting the temporal keys through %CMD_NEW_KEY.
+ *
+ * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be
+ * set by drivers indicating offload support of the PTK/GTK EAPOL
+ * handshakes during 802.1X authentication. In order to use the offload
+ * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS
+ * attribute flag. Drivers supporting this offload may reject the
+ * %NL80211_CMD_CONNECT when the attribute flag is not present.
+ *
+ * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK
+ * using %NL80211_CMD_SET_PMK. For offloaded FT support also
+ * %NL80211_ATTR_PMKR0_NAME must be provided.
+ */
+
+/**
+ * DOC: FILS shared key authentication offload
+ *
+ * FILS shared key authentication offload can be advertized by drivers by
+ * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
+ * FILS shared key authentication offload should be able to construct the
+ * authentication and association frames for FILS shared key authentication and
+ * eventually do a key derivation as per IEEE 802.11ai. The below additional
+ * parameters should be given to driver in %NL80211_CMD_CONNECT.
+ *	%NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
+ *	%NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
+ *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
+ *	%NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK
+ * rIK should be used to generate an authentication tag on the ERP message and
+ * rMSK should be used to derive a PMKSA.
+ * rIK, rMSK should be generated and keyname_nai, sequence number should be used
+ * as specified in IETF RFC 6696.
+ *
+ * When FILS shared key authentication is completed, driver needs to provide the
+ * below additional parameters to userspace.
+ *	%NL80211_ATTR_FILS_KEK - used for key renewal
+ *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
+ *	%NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
+ *	%Nl80211_ATTR_PMK - used to update PMKSA cache in userspace
+ * The PMKSA can be maintained in userspace persistently so that it can be used
+ * later after reboots or wifi turn off/on also.
+ *
+ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
+ * capable AP supporting PMK caching. It specifies the scope within which the
+ * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
+ * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
+ * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with
+ * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to
+ * use in a FILS shared key connection with PMKSA caching.
+ */
+
+/**
  * enum nl80211_commands - supported nl80211 commands
  *
  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -321,14 +382,24 @@
  * @NL80211_CMD_GET_SCAN: get scan results
  * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
  *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- *	probe requests at CCK rate or not.
+ *	probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to
+ *	specify a BSSID to scan for; if not included, the wildcard BSSID will
+ *	be used.
  * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
  *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
  * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
  *	partial scan results may be available
  *
  * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ *	intervals and certain number of cycles, as specified by
+ *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
+ *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
+ *	scheduled scan will run in an infinite loop with the specified interval.
+ *	These attributes are mutually exculsive,
+ *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
+ *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
+ *	If for some reason scheduled scan is aborted by the driver, all scan
+ *	plans are canceled (including scan plans that did not start yet).
  *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
  *	are passed, they are used in the probe requests.  For
  *	broadcast, a broadcast SSID must be passed (ie. an empty
@@ -339,7 +410,9 @@
  *	are used.  Extra IEs can also be passed from the userspace by
  *	using the %NL80211_ATTR_IE attribute.  The first cycle of the
  *	scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
- *	is supplied.
+ *	is supplied. If the device supports multiple concurrent scheduled
+ *	scans, it will allow such when the caller provides the flag attribute
+ *	%NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
  * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
  *	scheduled scan is not running. The caller may assume that as soon
  *	as the call returns, it is safe to start a new scheduled scan again.
@@ -358,10 +431,18 @@
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
  *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
  *
- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
- *	(for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC
+ *	(for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK
+ *	(PMK is used for PTKSA derivation in case of FILS shared key offload) or
+ *	using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
+ *	%NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
+ *	authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
+ *	advertized by a FILS capable AP identifying the scope of PMKSA in an
+ *	ESS.
  * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
- *	(for the BSSID) and %NL80211_ATTR_PMKID.
+ *	(for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
+ *	%NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
+ *	authentication.
  * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
  *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
@@ -418,7 +499,11 @@
  * @NL80211_CMD_ASSOCIATE: association request and notification; like
  *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
  *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
- *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The
+ *	%NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
+ *	request is for the initial association to an ESS (that attribute not
+ *	included) or for reassociation within the ESS (that attribute is
+ *	included).
  * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
  *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
  *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
@@ -457,7 +542,8 @@
  *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
  *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
  *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
- *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and
+ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
+ *	%NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
  *	%NL80211_ATTR_WIPHY_FREQ_HINT.
  *	If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
  *	restrictions on BSS selection, i.e., they effectively prevent roaming
@@ -468,6 +554,9 @@
  *	set of BSSID,frequency parameters is used (i.e., either the enforcing
  *	%NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
  *	%NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
+ *	%NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
+ *	the ESS in case the device is already associated and an association with
+ *	a different BSS is desired.
  *	Background scan period can optionally be
  *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
  *	if not specified default background scan configuration
@@ -475,9 +564,20 @@
  *	This attribute is ignored if driver does not support roam scan.
  *	It is also sent as an event, with the BSSID and response IEs when the
  *	connection is established or failed to be established. This can be
- *	determined by the STATUS_CODE attribute.
- * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
- *	sent as an event when the card/driver roamed by itself.
+ *	determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
+ *	non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the
+ *	event, the connection attempt failed due to not being able to initiate
+ *	authentication/association or not receiving a response from the AP.
+ *	Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
+ *	well to remain backwards compatible.
+ *	When establishing a security association, drivers that support 4 way
+ *	handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when
+ *	the 4 way handshake is completed successfully.
+ * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
+ *	When a security association was established with the new AP (e.g. if
+ *	the FT protocol was used for roaming or the driver completed the 4 way
+ *	handshake), this event should be followed by an
+ *	%NL80211_CMD_PORT_AUTHORIZED event.
  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
  *	userspace that a connection was dropped by the AP or due to other
  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
@@ -576,6 +676,20 @@
  *
  * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
  *
+ * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
+ *	multicast to unicast conversion. When enabled, all multicast packets
+ *	with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header)
+ *	will be sent out to each station once with the destination (multicast)
+ *	MAC address replaced by the station's MAC address. Note that this may
+ *	break certain expectations of the receiver, e.g. the ability to drop
+ *	unicast IP packets encapsulated in multicast L2 frames, or the ability
+ *	to not send destination unreachable messages in such cases.
+ *	This can only be toggled per BSS. Configure this on an interface of
+ *	type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces
+ *	(%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode.
+ *	If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this
+ *	command, the feature is disabled.
+ *
  * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
  *	mesh config parameters may be given.
  * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
@@ -811,6 +925,111 @@
  *	as an event to indicate changes for devices with wiphy-specific regdom
  *	management.
  *
+ * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is
+ *	not running. The driver indicates the status of the scan through
+ *	cfg80211_scan_done().
+ *
+ * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
+ *	%NL80211_ATTR_WDEV interface. This interface must have been
+ *	previously created with %NL80211_CMD_NEW_INTERFACE. After it
+ *	has been started, the NAN interface will create or join a
+ *	cluster. This command must have a valid
+ *	%NL80211_ATTR_NAN_MASTER_PREF attribute and optional
+ *	%NL80211_ATTR_BANDS attributes.  If %NL80211_ATTR_BANDS is
+ *	omitted or set to 0, it means don't-care and the device will
+ *	decide what to use.  After this command NAN functions can be
+ *	added.
+ * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
+ *	its %NL80211_ATTR_WDEV interface.
+ * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
+ *	with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
+ *	operation returns the strictly positive and unique instance id
+ *	(%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE)
+ *	of the function upon success.
+ *	Since instance ID's can be re-used, this cookie is the right
+ *	way to identify the function. This will avoid races when a termination
+ *	event is handled by the user space after it has already added a new
+ *	function that got the same instance id from the kernel as the one
+ *	which just terminated.
+ *	This cookie may be used in NAN events even before the command
+ *	returns, so userspace shouldn't process NAN events until it processes
+ *	the response to this command.
+ *	Look at %NL80211_ATTR_SOCKET_OWNER as well.
+ * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie.
+ *	This command is also used as a notification sent when a NAN function is
+ *	terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
+ *	and %NL80211_ATTR_COOKIE attributes.
+ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN
+ *	configuration. NAN must be operational (%NL80211_CMD_START_NAN
+ *	was executed).  It must contain at least one of the following
+ *	attributes: %NL80211_ATTR_NAN_MASTER_PREF,
+ *	%NL80211_ATTR_BANDS.  If %NL80211_ATTR_BANDS is omitted, the
+ *	current configuration is not changed.  If it is present but
+ *	set to zero, the configuration is changed to don't-care
+ *	(i.e. the device can decide what to do).
+ * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
+ *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
+ *	%NL80211_ATTR_COOKIE.
+ *
+ * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters
+ *	for subsequent roaming cases if the driver or firmware uses internal
+ *	BSS selection. This command can be issued only while connected and it
+ *	does not result in a change for the current association. Currently,
+ *	only the %NL80211_ATTR_IE data is used and updated with this command.
+ *
+ * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
+ *	for the given authenticator address (specified with &NL80211_ATTR_MAC).
+ *	When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the
+ *	PMK-R0, otherwise it specifies the PMK.
+ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
+ *	configured PMK for the authenticator address identified by
+ *	&NL80211_ATTR_MAC.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
+ *	handshake was completed successfully by the driver. The BSSID is
+ *	specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake
+ *	offload should send this event after indicating 802.11 association with
+ *	&NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed
+ *	&NL80211_CMD_DISCONNECT should be indicated instead.
+ *
+ * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
+ *	and RX notification.  This command is used both as a request to transmit
+ *	a control port frame and as a notification that a control port frame
+ *	has been received. %NL80211_ATTR_FRAME is used to specify the
+ *	frame contents.  The frame is the raw EAPoL data, without ethernet or
+ *	802.11 headers.
+ *	When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added
+ *	indicating the protocol type of the received frame; whether the frame
+ *	was received unencrypted and the MAC address of the peer respectively.
+ *
+ * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
+ *
+ * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
+ *	drivers that do not define separate commands for authentication and
+ *	association, but rely on user space for the authentication to happen.
+ *	This interface acts both as the event request (driver to user space)
+ *	to trigger the authentication and command response (userspace to
+ *	driver) to indicate the authentication status.
+ *
+ *	User space uses the %NL80211_CMD_CONNECT command to the host driver to
+ *	trigger a connection. The host driver selects a BSS and further uses
+ *	this interface to offload only the authentication part to the user
+ *	space. Authentication frames are passed between the driver and user
+ *	space through the %NL80211_CMD_FRAME interface. Host driver proceeds
+ *	further with the association after getting successful authentication
+ *	status. User space indicates the authentication status through
+ *	%NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
+ *	command interface.
+ *
+ *	Host driver reports this status on an authentication failure to the
+ *	user space through the connect result as the user space would have
+ *	initiated the connection through the connect request.
+ *
+ * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
+ *	ht opmode or vht opmode changes using any of &NL80211_ATTR_SMPS_MODE,
+ *	&NL80211_ATTR_CHANNEL_WIDTH,&NL80211_ATTR_NSS attributes with its
+ *	address(specified in &NL80211_ATTR_MAC).
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -997,6 +1216,32 @@ enum nl80211_commands {
 
 	NL80211_CMD_WIPHY_REG_CHANGE,
 
+	NL80211_CMD_ABORT_SCAN,
+
+	NL80211_CMD_START_NAN,
+	NL80211_CMD_STOP_NAN,
+	NL80211_CMD_ADD_NAN_FUNCTION,
+	NL80211_CMD_DEL_NAN_FUNCTION,
+	NL80211_CMD_CHANGE_NAN_CONFIG,
+	NL80211_CMD_NAN_MATCH,
+
+	NL80211_CMD_SET_MULTICAST_TO_UNICAST,
+
+	NL80211_CMD_UPDATE_CONNECT_PARAMS,
+
+	NL80211_CMD_SET_PMK,
+	NL80211_CMD_DEL_PMK,
+
+	NL80211_CMD_PORT_AUTHORIZED,
+
+	NL80211_CMD_RELOAD_REGDB,
+
+	NL80211_CMD_EXTERNAL_AUTH,
+
+	NL80211_CMD_STA_OPMODE_CHANGED,
+
+	NL80211_CMD_CONTROL_PORT_FRAME,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1219,8 +1464,12 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
  *	used for the association (&enum nl80211_mfp, represented as a u32);
- *	this attribute can be used
- *	with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests
+ *	this attribute can be used with %NL80211_CMD_ASSOCIATE and
+ *	%NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for
+ *	%NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it
+ *	must have decided whether to use management frame protection or not.
+ *	Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will
+ *	let the driver (or the firmware) decide whether to use MFP or not.
  *
  * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
  *	&struct nl80211_sta_flag_update.
@@ -1240,6 +1489,15 @@ enum nl80211_commands {
  * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
  *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
  *	ethertype frames used for key negotiation must not be encrypted.
+ * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control
+ *	port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE)
+ *	will be sent directly to the network interface or sent via the NL80211
+ *	socket.  If this attribute is missing, then legacy behavior of sending
+ *	control port frames directly to the network interface is used.  If the
+ *	flag is included, then control port frames are sent over NL80211 instead
+ *	using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is
+ *	to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
+ *	flag.
  *
  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
  *	We recommend using nested, driver-specific attributes within this.
@@ -1270,8 +1528,11 @@ enum nl80211_commands {
  * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
  *	sent by peer, for ROAM and successful CONNECT events.
  *
- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
- *	commands to specify using a reassociate frame
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT
+ *	commands to specify a request to reassociate within an ESS, i.e., to use
+ *	Reassociate Request frame (with the value of this attribute in the
+ *	Current AP address field) instead of Association Request frame which is
+ *	used for the initial association to an ESS.
  *
  * @NL80211_ATTR_KEY: key information in a nested attribute with
  *	%NL80211_KEY_* sub-attributes
@@ -1311,7 +1572,13 @@ enum nl80211_commands {
  *	enum nl80211_band value is used as the index (nla_type() of the nested
  *	data. If a band is not included, it will be configured to allow all
  *	rates based on negotiated supported rates information. This attribute
- *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
+ *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP,
+ *	and joining mesh networks (not IBSS yet). In the later case, it must
+ *	specify just a single bitrate, which is to be used for the beacon.
+ *	The driver must also specify support for this with the extended
+ *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+ *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
+ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
  *
  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
@@ -1557,8 +1824,16 @@ enum nl80211_commands {
  *	the connection request from a station. nl80211_connect_failed_reason
  *	enum has different reasons of connection failure.
  *
- * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
- *	with the Authentication transaction sequence number field.
+ * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
+ *	This contains the authentication frame body (non-IE and IE data),
+ *	excluding the Authentication algorithm number, i.e., starting at the
+ *	Authentication transaction sequence number field. It is used with
+ *	authentication algorithms that need special fields to be added into
+ *	the frames (SAE and FILS). Currently, only the SAE cases use the
+ *	initial two fields (Authentication transaction sequence number and
+ *	Status code). However, those fields are included in the attribute data
+ *	for all authentication algorithms to keep the attribute definition
+ *	consistent.
  *
  * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
  *	association request when used with NL80211_CMD_NEW_STATION)
@@ -1659,7 +1934,9 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
  *	Notification Element based on association request when used with
- *	%NL80211_CMD_NEW_STATION; u8 attribute.
+ *	%NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when
+ *	%NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);
+ *	u8 attribute.
  *
  * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
  *	%NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
@@ -1701,6 +1978,19 @@ enum nl80211_commands {
  *	regulatory indoor configuration would be owned by the netlink socket
  *	that configured the indoor setting, and the indoor operation would be
  *	cleared when the socket is closed.
+ *	If set during NAN interface creation, the interface will be destroyed
+ *	if the socket is closed just like any other interface. Moreover, NAN
+ *	notifications will be sent in unicast to that socket. Without this
+ *	attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
+ *	multicast group.
+ *	If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
+ *	station will deauthenticate when the socket is closed.
+ *	If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically
+ *	torn down when the socket is closed.
+ *	If set during %NL80211_CMD_JOIN_MESH the mesh setup will be
+ *	automatically torn down when the socket is closed.
+ *	If set during %NL80211_CMD_START_AP the AP will be automatically
+ *	disabled when the socket is closed.
  *
  * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
  *	the TDLS link initiator.
@@ -1712,6 +2002,8 @@ enum nl80211_commands {
  *	underlying device supports these minimal RRM features:
  *		%NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
  *		%NL80211_FEATURE_QUIET,
+ *	Or, if global RRM is supported, see:
+ *		%NL80211_EXT_FEATURE_RRM
  *	If this flag is used, driver must add the Power Capabilities IE to the
  *	association request. In addition, it must also set the RRM capability
  *	flag in the association request's Capability Info field.
@@ -1755,12 +2047,184 @@ enum nl80211_commands {
  *	over all channels.
  *
  * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a
- *	scheduled scan (or a WoWLAN net-detect scan) is started, u32
- *	in seconds.
+ *	scheduled scan is started.  Or the delay before a WoWLAN
+ *	net-detect scan is started, counting from the moment the
+ *	system is suspended.  This value is a u32, in seconds.
 
  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
  *      is operating in an indoor environment.
  *
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
+ *	scheduled scan supported by the device (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
+ *	a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
+ *	a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
+ *	Each scan plan defines the number of scan iterations and the interval
+ *	between scans. The last scan plan will always run infinitely,
+ *	thus it must not specify the number of iterations, only the interval
+ *	between scans. The scan plans are executed sequentially.
+ *	Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
+ * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
+ *	in a PBSS. Specified in %NL80211_CMD_CONNECT to request
+ *	connecting to a PCP, and in %NL80211_CMD_START_AP to start
+ *	a PCP instead of AP. Relevant for DMG networks only.
+ * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
+ *	BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains
+ *	attributes according &enum nl80211_bss_select_attr to indicate what
+ *	BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT
+ *	it contains the behaviour-specific attribute containing the parameters for
+ *	BSS selection to be done by driver and/or firmware.
+ *
+ * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
+ *	or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
+ *
+ * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
+ *
+ * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
+ *	%NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA,
+ *	%NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per
+ *	interface type.
+ *
+ * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO
+ *	groupID for monitor mode.
+ *	The first 8 bytes are a mask that defines the membership in each
+ *	group (there are 64 groups, group 0 and 63 are reserved),
+ *	each bit represents a group and set to 1 for being a member in
+ *	that group and 0 for not being a member.
+ *	The remaining 16 bytes define the position in each group: 2 bits for
+ *	each group.
+ *	(smaller group numbers represented on most significant bits and bigger
+ *	group numbers on least significant bits.)
+ *	This attribute is used only if all interfaces are in monitor mode.
+ *	Set this attribute in order to monitor packets using the given MU-MIMO
+ *	groupID data.
+ *	to turn off that feature set all the bits of the groupID to zero.
+ * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow
+ *	when using MU-MIMO air sniffer.
+ *	to turn that feature off set an invalid mac address
+ *	(e.g. FF:FF:FF:FF:FF:FF)
+ *
+ * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually
+ *	started (u64). The time is the TSF of the BSS the interface that
+ *	requested the scan is connected to (if available, otherwise this
+ *	attribute must not be included).
+ * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which
+ *	%NL80211_ATTR_SCAN_START_TIME_TSF is set.
+ * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If
+ *	%NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the
+ *	maximum measurement duration allowed. This attribute is used with
+ *	measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN
+ *	if the scan is used for beacon report radio measurement.
+ * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates
+ *	that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is
+ *	mandatory. If this flag is not set, the duration is the maximum duration
+ *	and the actual measurement duration may be shorter.
+ *
+ * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is
+ *	used to pull the stored data for mesh peer in power save state.
+ *
+ * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by
+ *	%NL80211_CMD_START_NAN and optionally with
+ *	%NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
+ *	Also, values 1 and 255 are reserved for certification purposes and
+ *	should not be used during a normal device operation.
+ * @NL80211_ATTR_BANDS: operating bands configuration.  This is a u32
+ *	bitmask of BIT(NL80211_BAND_*) as described in %enum
+ *	nl80211_band.  For instance, for NL80211_BAND_2GHZ, bit 0
+ *	would be set.  This attribute is used with
+ *	%NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and
+ *	it is optional.  If no bands are set, it means don't-care and
+ *	the device will decide what to use.
+ * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
+ *	&enum nl80211_nan_func_attributes for description of this nested
+ *	attribute.
+ * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
+ *	See &enum nl80211_nan_match_attributes.
+ * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame
+ *	protection.
+ * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association
+ *	Request/Response frame protection. This attribute contains the 16 octet
+ *	STA Nonce followed by 16 octets of AP Nonce.
+ *
+ * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast
+ *	packets should be send out as unicast to all stations (flag attribute).
+ *
+ * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
+ *	used in various commands/events for specifying the BSSID.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
+ *	other BSSs has to be better or slightly worse than the current
+ *	connected BSS so that they get reported to user space.
+ *	This will give an opportunity to userspace to consider connecting to
+ *	other matching BSSs which have better or slightly worse RSSI than
+ *	the current connected BSS by using an offloaded operation to avoid
+ *	unnecessary wakeups.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
+ *	the specified band is to be adjusted before doing
+ *	%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out
+ *	better BSSs. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
+ *
+ * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
+ *	u32 attribute with an &enum nl80211_timeout_reason value. This is used,
+ *	e.g., with %NL80211_CMD_CONNECT event.
+ *
+ * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)
+ *	username part of NAI used to refer keys rRK and rIK. This is used with
+ *	%NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part
+ *	of NAI specifying the domain name of the ER server. This is used with
+ *	%NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number
+ *	to use in ERP messages. This is used in generating the FILS wrapped data
+ *	for FILS authentication and is used with %NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the
+ *	NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and
+ *	%NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK
+ *	from successful FILS authentication and is used with
+ *	%NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
+ *	identifying the scope of PMKSAs. This is used with
+ *	@NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
+ *
+ * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
+ *	%NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.
+ *	For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way
+ *	handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is
+ *	used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute
+ *	specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
+ *	indicate that it supports multiple active scheduled scan requests.
+ * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
+ *	scan request that may be active for the device (u32).
+ *
+ * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
+ *	in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
+ *	wants to use the supported offload of the 4-way handshake.
+ * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
+ * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
+ *
+ * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
+ *     authentication operation (u32 attribute with an
+ *     &enum nl80211_external_auth_action value). This is used with the
+ *     &NL80211_CMD_EXTERNAL_AUTH request event.
+ * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
+ *     space supports external authentication. This attribute shall be used
+ *     only with %NL80211_CMD_CONNECT request. The driver may offload
+ *     authentication processing to user space if this capability is indicated
+ *     in NL80211_CMD_CONNECT requests from the user space.
+ *
+ * @NL80211_ATTR_NSS: Station's New/updated  RX_NSS value notified using this
+ *	u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2019,7 +2483,7 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_CONN_FAILED_REASON,
 
-	NL80211_ATTR_SAE_DATA,
+	NL80211_ATTR_AUTH_DATA,
 
 	NL80211_ATTR_VHT_CAPABILITY,
 
@@ -2130,6 +2594,71 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_REG_INDOOR,
 
+	NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
+	NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
+	NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
+	NL80211_ATTR_SCHED_SCAN_PLANS,
+
+	NL80211_ATTR_PBSS,
+
+	NL80211_ATTR_BSS_SELECT,
+
+	NL80211_ATTR_STA_SUPPORT_P2P_PS,
+
+	NL80211_ATTR_PAD,
+
+	NL80211_ATTR_IFTYPE_EXT_CAPA,
+
+	NL80211_ATTR_MU_MIMO_GROUP_DATA,
+	NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR,
+
+	NL80211_ATTR_SCAN_START_TIME_TSF,
+	NL80211_ATTR_SCAN_START_TIME_TSF_BSSID,
+	NL80211_ATTR_MEASUREMENT_DURATION,
+	NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY,
+
+	NL80211_ATTR_MESH_PEER_AID,
+
+	NL80211_ATTR_NAN_MASTER_PREF,
+	NL80211_ATTR_BANDS,
+	NL80211_ATTR_NAN_FUNC,
+	NL80211_ATTR_NAN_MATCH,
+
+	NL80211_ATTR_FILS_KEK,
+	NL80211_ATTR_FILS_NONCES,
+
+	NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED,
+
+	NL80211_ATTR_BSSID,
+
+	NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
+	NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
+
+	NL80211_ATTR_TIMEOUT_REASON,
+
+	NL80211_ATTR_FILS_ERP_USERNAME,
+	NL80211_ATTR_FILS_ERP_REALM,
+	NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
+	NL80211_ATTR_FILS_ERP_RRK,
+	NL80211_ATTR_FILS_CACHE_ID,
+
+	NL80211_ATTR_PMK,
+
+	NL80211_ATTR_SCHED_SCAN_MULTI,
+	NL80211_ATTR_SCHED_SCAN_MAX_REQS,
+
+	NL80211_ATTR_WANT_1X_4WAY_HS,
+	NL80211_ATTR_PMKR0_NAME,
+	NL80211_ATTR_PORT_AUTHORIZED,
+
+	NL80211_ATTR_EXTERNAL_AUTH_ACTION,
+	NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,
+
+	NL80211_ATTR_NSS,
+	NL80211_ATTR_ACK_SIGNAL,
+
+	NL80211_ATTR_CONTROL_PORT_OVER_NL80211,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2141,6 +2670,7 @@ enum nl80211_attrs {
 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
 #define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
 #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
+#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
 
 /*
  * Allow user space programs to use #ifdef on new attributes by defining them
@@ -2208,6 +2738,7 @@ enum nl80211_attrs {
  *	commands to create and destroy one
  * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
  *	This mode corresponds to the MIB variable dot11OCBActivated=true
+ * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
  * @NUM_NL80211_IFTYPES: number of defined interface types
  *
@@ -2228,6 +2759,7 @@ enum nl80211_iftype {
 	NL80211_IFTYPE_P2P_GO,
 	NL80211_IFTYPE_P2P_DEVICE,
 	NL80211_IFTYPE_OCB,
+	NL80211_IFTYPE_NAN,
 
 	/* keep last */
 	NUM_NL80211_IFTYPES,
@@ -2273,6 +2805,20 @@ enum nl80211_sta_flags {
 	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
 };
 
+/**
+ * enum nl80211_sta_p2p_ps_status - station support of P2P PS
+ *
+ * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
+ * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NUM_NL80211_P2P_PS_STATUS: number of values
+ */
+enum nl80211_sta_p2p_ps_status {
+	NL80211_P2P_PS_UNSUPPORTED = 0,
+	NL80211_P2P_PS_SUPPORTED,
+
+	NUM_NL80211_P2P_PS_STATUS,
+};
+
 #define NL80211_STA_FLAG_MAX_OLD_API	NL80211_STA_FLAG_TDLS_PEER
 
 /**
@@ -2430,6 +2976,10 @@ enum nl80211_sta_bss_param {
  *	TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
  *	each one of those is again nested with &enum nl80211_tid_stats
  *	attributes carrying the actual values.
+ * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
+ *	received from the station (u64, usec)
+ * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
+ * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -2466,6 +3016,9 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_BEACON_RX,
 	NL80211_STA_INFO_BEACON_SIGNAL_AVG,
 	NL80211_STA_INFO_TID_STATS,
+	NL80211_STA_INFO_RX_DURATION,
+	NL80211_STA_INFO_PAD,
+	NL80211_STA_INFO_ACK_SIGNAL,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -2482,6 +3035,7 @@ enum nl80211_sta_info {
  *	transmitted MSDUs (not counting the first attempt; u64)
  * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
  *	MSDUs (u64)
+ * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
  * @NUM_NL80211_TID_STATS: number of attributes here
  * @NL80211_TID_STATS_MAX: highest numbered attribute here
  */
@@ -2491,6 +3045,7 @@ enum nl80211_tid_stats {
 	NL80211_TID_STATS_TX_MSDU,
 	NL80211_TID_STATS_TX_MSDU_RETRIES,
 	NL80211_TID_STATS_TX_MSDU_FAILED,
+	NL80211_TID_STATS_PAD,
 
 	/* keep last */
 	NUM_NL80211_TID_STATS,
@@ -2620,16 +3175,17 @@ enum nl80211_band_attr {
  *	an indoor surroundings, i.e., it is connected to AC power (and not
  *	through portable DC inverters) or is under the control of a master
  *	that is acting as an AP and is connected to AC power.
- * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
+ * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this
  *	channel if it's connected concurrently to a BSS on the same channel on
  *	the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
- *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
- *	channel that has the GO_CONCURRENT attribute set can be done when there
- *	is a clear assessment that the device is operating under the guidance of
- *	an authorized master, i.e., setting up a GO while the device is also
- *	connected to an AP with DFS and radar detection on the UNII band (it is
- *	up to user-space, i.e., wpa_supplicant to perform the required
- *	verifications)
+ *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS
+ *	off-channel on a channel that has the IR_CONCURRENT attribute set can be
+ *	done when there is a clear assessment that the device is operating under
+ *	the guidance of an authorized master, i.e., setting up a GO or TDLS
+ *	off-channel while the device is also connected to an AP with DFS and
+ *	radar detection on the UNII band (it is up to user-space, i.e.,
+ *	wpa_supplicant to perform the required verifications). Using this
+ *	attribute for IR is disallowed for master interfaces (IBSS, AP).
  * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
@@ -2641,7 +3197,7 @@ enum nl80211_band_attr {
  * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
  * for more information on the FCC description of the relaxations allowed
  * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
- * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
+ * NL80211_FREQUENCY_ATTR_IR_CONCURRENT.
  */
 enum nl80211_frequency_attr {
 	__NL80211_FREQUENCY_ATTR_INVALID,
@@ -2659,7 +3215,7 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_160MHZ,
 	NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
 	NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
-	NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
+	NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
 	NL80211_FREQUENCY_ATTR_NO_20MHZ,
 	NL80211_FREQUENCY_ATTR_NO_10MHZ,
 
@@ -2672,6 +3228,8 @@ enum nl80211_frequency_attr {
 #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN	NL80211_FREQUENCY_ATTR_NO_IR
 #define NL80211_FREQUENCY_ATTR_NO_IBSS		NL80211_FREQUENCY_ATTR_NO_IR
 #define NL80211_FREQUENCY_ATTR_NO_IR		NL80211_FREQUENCY_ATTR_NO_IR
+#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
+					NL80211_FREQUENCY_ATTR_IR_CONCURRENT
 
 /**
  * enum nl80211_bitrate_attr - bitrate attributes
@@ -2787,6 +3345,7 @@ enum nl80211_reg_rule_attr {
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
  *	only report BSS with matching SSID.
+ *	(This cannot be used together with BSSID.)
  * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
  *	BSS in scan results. Filtering is turned off if not specified. Note that
  *	if this attribute is in a match set of its own, then it is treated as
@@ -2795,6 +3354,15 @@ enum nl80211_reg_rule_attr {
  *	how this API was implemented in the past. Also, due to the same problem,
  *	the only way to create a matchset with only an RSSI filter (with this
  *	attribute) is if there's only a single matchset with the RSSI attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
+ *	%NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
+ *	relative to current bss's RSSI.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
+ *	BSS-es in the specified band is to be adjusted before doing
+ *	RSSI-based BSS selection. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
+ *	(this cannot be used together with SSID).
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -2804,6 +3372,9 @@ enum nl80211_sched_scan_match_attr {
 
 	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
+	NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -2830,7 +3401,7 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
  *	base on contiguous rules and wider channels will be allowed to cross
  *	multiple contiguous/overlapping frequency ranges.
- * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
+ * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
  * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
  * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
  * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
@@ -2847,7 +3418,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_IR		= 1<<7,
 	__NL80211_RRF_NO_IBSS		= 1<<8,
 	NL80211_RRF_AUTO_BW		= 1<<11,
-	NL80211_RRF_GO_CONCURRENT	= 1<<12,
+	NL80211_RRF_IR_CONCURRENT	= 1<<12,
 	NL80211_RRF_NO_HT40MINUS	= 1<<13,
 	NL80211_RRF_NO_HT40PLUS		= 1<<14,
 	NL80211_RRF_NO_80MHZ		= 1<<15,
@@ -2859,6 +3430,7 @@ enum nl80211_reg_rule_flags {
 #define NL80211_RRF_NO_IR		NL80211_RRF_NO_IR
 #define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
 					 NL80211_RRF_NO_HT40PLUS)
+#define NL80211_RRF_GO_CONCURRENT	NL80211_RRF_IR_CONCURRENT
 
 /* For backport compatibility with older userspace */
 #define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
@@ -2923,6 +3495,7 @@ enum nl80211_user_reg_hint_type {
  *	transmitting data (on channel or globally)
  * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
  *	(on this channel or globally)
+ * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
  *	currently defined
  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -2938,6 +3511,7 @@ enum nl80211_survey_info {
 	NL80211_SURVEY_INFO_TIME_RX,
 	NL80211_SURVEY_INFO_TIME_TX,
 	NL80211_SURVEY_INFO_TIME_SCAN,
+	NL80211_SURVEY_INFO_PAD,
 
 	/* keep last */
 	__NL80211_SURVEY_INFO_AFTER_LAST,
@@ -3360,6 +3934,19 @@ enum nl80211_bss_scan_width {
  *	(not present if no beacon frame has been received yet)
  * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
  *	@NL80211_BSS_TSF is known to be from a probe response (flag attribute)
+ * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
+ *	was last updated by a received frame. The value is expected to be
+ *	accurate to about 10ms. (u64, nanoseconds)
+ * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
+ * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first
+ *	octet of the timestamp field of the last beacon/probe received for
+ *	this BSS. The time is the TSF of the BSS specified by
+ *	@NL80211_BSS_PARENT_BSSID. (u64).
+ * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF
+ *	is set.
+ * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
+ *	Contains a nested array of signal strength attributes (u8, dBm),
+ *	using the nesting index as the antenna number.
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -3379,6 +3966,11 @@ enum nl80211_bss {
 	NL80211_BSS_CHAN_WIDTH,
 	NL80211_BSS_BEACON_TSF,
 	NL80211_BSS_PRESP_DATA,
+	NL80211_BSS_LAST_SEEN_BOOTTIME,
+	NL80211_BSS_PAD,
+	NL80211_BSS_PARENT_TSF,
+	NL80211_BSS_PARENT_BSSID,
+	NL80211_BSS_CHAIN_SIGNAL,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
@@ -3411,6 +4003,9 @@ enum nl80211_bss_status {
  * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
  * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
  * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
+ * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
+ * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
+ * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
  * @__NL80211_AUTHTYPE_NUM: internal
  * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
  * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
@@ -3423,6 +4018,9 @@ enum nl80211_auth_type {
 	NL80211_AUTHTYPE_FT,
 	NL80211_AUTHTYPE_NETWORK_EAP,
 	NL80211_AUTHTYPE_SAE,
+	NL80211_AUTHTYPE_FILS_SK,
+	NL80211_AUTHTYPE_FILS_SK_PFS,
+	NL80211_AUTHTYPE_FILS_PK,
 
 	/* keep last */
 	__NL80211_AUTHTYPE_NUM,
@@ -3449,10 +4047,12 @@ enum nl80211_key_type {
  * enum nl80211_mfp - Management frame protection state
  * @NL80211_MFP_NO: Management frame protection not used
  * @NL80211_MFP_REQUIRED: Management frame protection required
+ * @NL80211_MFP_OPTIONAL: Management frame protection is optional
  */
 enum nl80211_mfp {
 	NL80211_MFP_NO,
 	NL80211_MFP_REQUIRED,
+	NL80211_MFP_OPTIONAL,
 };
 
 enum nl80211_wpa_versions {
@@ -3564,11 +4164,15 @@ enum nl80211_txrate_gi {
  * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
  * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
  * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
+ * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
+ *	since newer kernel versions may support more bands
  */
 enum nl80211_band {
 	NL80211_BAND_2GHZ,
 	NL80211_BAND_5GHZ,
 	NL80211_BAND_60GHZ,
+
+	NUM_NL80211_BANDS,
 };
 
 /**
@@ -3586,7 +4190,10 @@ enum nl80211_ps_state {
  * @__NL80211_ATTR_CQM_INVALID: invalid
  * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
  *	the threshold for the RSSI level at which an event will be sent. Zero
- *	to disable.
+ *	to disable.  Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is
+ *	set, multiple values can be supplied as a low-to-high sorted array of
+ *	threshold values in dBm.  Events will be sent when the RSSI value
+ *	crosses any of the thresholds.
  * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
  *	the minimum amount the RSSI level must change after an event before a
  *	new event may be issued (to reduce effects of RSSI oscillation).
@@ -3606,6 +4213,8 @@ enum nl80211_ps_state {
  *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
  * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
  *	loss event
+ * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the
+ *	RSSI threshold event.
  * @__NL80211_ATTR_CQM_AFTER_LAST: internal
  * @NL80211_ATTR_CQM_MAX: highest key attribute
  */
@@ -3619,6 +4228,7 @@ enum nl80211_attr_cqm {
 	NL80211_ATTR_CQM_TXE_PKTS,
 	NL80211_ATTR_CQM_TXE_INTVL,
 	NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
+	NL80211_ATTR_CQM_RSSI_LEVEL,
 
 	/* keep last */
 	__NL80211_ATTR_CQM_AFTER_LAST,
@@ -4027,6 +4637,9 @@ enum nl80211_iface_limit_attrs {
  *	of supported channel widths for radar detection.
  * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
  *	of supported regulatory regions for radar detection.
+ * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
+ *	different beacon intervals supported by all the interface combinations
+ *	in this group (if not present, all beacon intervals be identical).
  * @NUM_NL80211_IFACE_COMB: number of attributes
  * @MAX_NL80211_IFACE_COMB: highest attribute number
  *
@@ -4034,8 +4647,8 @@ enum nl80211_iface_limit_attrs {
  *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
  *	=> allows an AP and a STA that must match BIs
  *
- *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
- *	=> allows 8 of AP/GO
+ *	numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,
+ *	=> allows 8 of AP/GO that can have BI gcd >= min gcd
  *
  *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
  *	=> allows two STAs on different channels
@@ -4061,6 +4674,7 @@ enum nl80211_if_combination_attrs {
 	NL80211_IFACE_COMB_NUM_CHANNELS,
 	NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
 	NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
+	NL80211_IFACE_COMB_BI_MIN_GCD,
 
 	/* keep last */
 	NUM_NL80211_IFACE_COMB,
@@ -4354,12 +4968,108 @@ enum nl80211_feature_flags {
 /**
  * enum nl80211_ext_feature_index - bit index of extended features.
  * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
+ * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can
+ *	can request to use RRM (see %NL80211_ATTR_USE_RRM) with
+ *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
+ *	the ASSOC_REQ_USE_RRM flag in the association request even if
+ *	NL80211_FEATURE_QUIET is not advertized.
+ * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
+ *	sniffer which means that it can be configured to hear packets from
+ *	certain groups which can be configured by the
+ *	%NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,
+ *	or can be configured to follow a station by configuring the
+ *	%NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.
+ * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual
+ *	time the scan started in scan results event. The time is the TSF of
+ *	the BSS that the interface that requested the scan is connected to
+ *	(if available).
+ * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
+ *	time the last beacon/probe was received. The time is the TSF of the
+ *	BSS that the interface that requested the scan is connected to
+ *	(if available).
+ * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
+ *	channel dwell time.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
+ *	configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
+ *	configuration (AP/mesh) with HT rates.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
+ *	configuration (AP/mesh) with VHT rates.
+ * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
+ *	with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
+ *	in @NL80211_CMD_FRAME while not associated.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
+ *	randomized TA in @NL80211_CMD_FRAME while associated.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
+ *	for reporting BSSs with better RSSI than the current connected BSS
+ *	(%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
+ * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the
+ *	%NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
+ *	RSSI threshold values to monitor rather than exactly one threshold.
+ * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key
+ *	authentication with %NL80211_CMD_CONNECT.
+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way
+ *	handshake with PSK in station mode (PSK is passed as part of the connect
+ *	and associate commands), doing it in the host might not be supported.
+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way
+ *	handshake with 802.1X in station mode (will pass EAP frames to the host
+ *	and accept the set_pmk/del_pmk commands), doing it in the host might not
+ *	be supported.
+ * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding
+ *	the max channel attribute in the FILS request params IE with the
+ *	actual dwell time.
+ * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe
+ *	response
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending
+ *	the first probe request in each channel at rate of at least 5.5Mbps.
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports
+ *	probe request tx deferral and suppression
+ * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
+ *	value in %NL80211_ATTR_USE_MFP.
+ * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan.
+ * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan.
+ * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan.
+ * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions.
+ *	Device or driver will do all DFS-related actions by itself,
+ *	informing user-space about CAC progress, radar detection event,
+ *	channel change triggered by radar detection event.
+ *	No need to start CAC from user-space, no need to react to
+ *	"radar detected" event.
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
+ *	receiving control port frames over nl80211 instead of the netdevice.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
 enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_VHT_IBSS,
+	NL80211_EXT_FEATURE_RRM,
+	NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER,
+	NL80211_EXT_FEATURE_SCAN_START_TIME,
+	NL80211_EXT_FEATURE_BSS_PARENT_TSF,
+	NL80211_EXT_FEATURE_SET_SCAN_DWELL,
+	NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+	NL80211_EXT_FEATURE_BEACON_RATE_HT,
+	NL80211_EXT_FEATURE_BEACON_RATE_VHT,
+	NL80211_EXT_FEATURE_FILS_STA,
+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
+	NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
+	NL80211_EXT_FEATURE_CQM_RSSI_LIST,
+	NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
+	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
+	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
+	NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME,
+	NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP,
+	NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
+	NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
+	NL80211_EXT_FEATURE_MFP_OPTIONAL,
+	NL80211_EXT_FEATURE_LOW_SPAN_SCAN,
+	NL80211_EXT_FEATURE_LOW_POWER_SCAN,
+	NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
+	NL80211_EXT_FEATURE_DFS_OFFLOAD,
+	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -4399,12 +5109,31 @@ enum nl80211_connect_failed_reason {
 };
 
 /**
+ * enum nl80211_timeout_reason - timeout reasons
+ *
+ * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
+ * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
+ * @NL80211_TIMEOUT_AUTH: Authentication timed out.
+ * @NL80211_TIMEOUT_ASSOC: Association timed out.
+ */
+enum nl80211_timeout_reason {
+	NL80211_TIMEOUT_UNSPECIFIED,
+	NL80211_TIMEOUT_SCAN,
+	NL80211_TIMEOUT_AUTH,
+	NL80211_TIMEOUT_ASSOC,
+};
+
+/**
  * enum nl80211_scan_flags -  scan request control flags
  *
  * Scan request control flags are used to control the handling
  * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
  * requests.
  *
+ * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and
+ * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only
+ * one of them can be used in the request.
+ *
  * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
  * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
  * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
@@ -4421,12 +5150,44 @@ enum nl80211_connect_failed_reason {
  *	locally administered 1, multicast 0) is assumed.
  *	This flag must not be requested when the feature isn't supported, check
  *	the nl80211 feature flags for the device.
+ * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS
+ *	request parameters IE in the probe request
+ * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
+ *	rate of at least 5.5M. In case non OCE AP is dicovered in the channel,
+ *	only the first probe req in the channel will be sent in high rate.
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
+ *	tx deferral (dot11FILSProbeDelay shall be set to 15ms)
+ *	and suppression (if it has received a broadcast Probe Response frame,
+ *	Beacon frame or FILS Discovery frame from an AP that the STA considers
+ *	a suitable candidate for (re-)association - suitable in terms of
+ *	SSID and/or RSSI.
+ * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to
+ *	accomplish the scan. Thus, this flag intends the driver to perform the
+ *	scan request with lesser span/duration. It is specific to the driver
+ *	implementations on how this is accomplished. Scan accuracy may get
+ *	impacted with this flag.
+ * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume
+ *	optimal possible power. Drivers can resort to their specific means to
+ *	optimize the power. Scan accuracy may get impacted with this flag.
+ * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan
+ *	results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum
+ *	possible scan results. This flag hints the driver to use the best
+ *	possible scan configuration to improve the accuracy in scanning.
+ *	Latency and power use may get impacted with this flag.
  */
 enum nl80211_scan_flags {
-	NL80211_SCAN_FLAG_LOW_PRIORITY			= 1<<0,
-	NL80211_SCAN_FLAG_FLUSH				= 1<<1,
-	NL80211_SCAN_FLAG_AP				= 1<<2,
-	NL80211_SCAN_FLAG_RANDOM_ADDR			= 1<<3,
+	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
+	NL80211_SCAN_FLAG_FLUSH					= 1<<1,
+	NL80211_SCAN_FLAG_AP					= 1<<2,
+	NL80211_SCAN_FLAG_RANDOM_ADDR				= 1<<3,
+	NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME			= 1<<4,
+	NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP		= 1<<5,
+	NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE		= 1<<6,
+	NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION	= 1<<7,
+	NL80211_SCAN_FLAG_LOW_SPAN				= 1<<8,
+	NL80211_SCAN_FLAG_LOW_POWER				= 1<<9,
+	NL80211_SCAN_FLAG_HIGH_ACCURACY				= 1<<10,
 };
 
 /**
@@ -4480,12 +5241,20 @@ enum nl80211_smps_mode {
  *	change to the channel status.
  * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
  *	over, channel becomes usable.
+ * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this
+ *	non-operating channel is expired and no longer valid. New CAC must
+ *	be done on this channel before starting the operation. This is not
+ *	applicable for ETSI dfs domain where pre-CAC is valid for ever.
+ * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started,
+ *	should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled.
  */
 enum nl80211_radar_event {
 	NL80211_RADAR_DETECTED,
 	NL80211_RADAR_CAC_FINISHED,
 	NL80211_RADAR_CAC_ABORTED,
 	NL80211_RADAR_NOP_FINISHED,
+	NL80211_RADAR_PRE_CAC_EXPIRED,
+	NL80211_RADAR_CAC_STARTED,
 };
 
 /**
@@ -4585,4 +5354,251 @@ enum nl80211_tdls_peer_capability {
 	NL80211_TDLS_PEER_WMM = 1<<2,
 };
 
+/**
+ * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
+ * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
+ *	seconds (u32).
+ * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
+ *	scan plan (u32). The last scan plan must not specify this attribute
+ *	because it will run infinitely. A value of zero is invalid as it will
+ *	make the scan plan meaningless.
+ * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
+ *	currently defined
+ * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_plan {
+	__NL80211_SCHED_SCAN_PLAN_INVALID,
+	NL80211_SCHED_SCAN_PLAN_INTERVAL,
+	NL80211_SCHED_SCAN_PLAN_ITERATIONS,
+
+	/* keep last */
+	__NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
+	NL80211_SCHED_SCAN_PLAN_MAX =
+		__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
+};
+
+/**
+ * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
+ *
+ * @band: band of BSS that must match for RSSI value adjustment. The value
+ *	of this field is according to &enum nl80211_band.
+ * @delta: value used to adjust the RSSI value of matching BSS in dB.
+ */
+struct nl80211_bss_select_rssi_adjust {
+	__u8 band;
+	__s8 delta;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_bss_select_attr - attributes for bss selection.
+ *
+ * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
+ * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
+ *	is requested.
+ * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
+ *	selection should be done such that the specified band is preferred.
+ *	When there are multiple BSS-es in the preferred band, the driver
+ *	shall use RSSI-based BSS selection as a second step. The value of
+ *	this attribute is according to &enum nl80211_band (u32).
+ * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
+ *	BSS-es in the specified band is to be adjusted before doing
+ *	RSSI-based BSS selection. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
+ * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
+ *
+ * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
+ * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
+ * which the driver shall use.
+ */
+enum nl80211_bss_select_attr {
+	__NL80211_BSS_SELECT_ATTR_INVALID,
+	NL80211_BSS_SELECT_ATTR_RSSI,
+	NL80211_BSS_SELECT_ATTR_BAND_PREF,
+	NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
+
+	/* keep last */
+	__NL80211_BSS_SELECT_ATTR_AFTER_LAST,
+	NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_nan_function_type - NAN function type
+ *
+ * Defines the function type of a NAN function
+ *
+ * @NL80211_NAN_FUNC_PUBLISH: function is publish
+ * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
+ * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
+ */
+enum nl80211_nan_function_type {
+	NL80211_NAN_FUNC_PUBLISH,
+	NL80211_NAN_FUNC_SUBSCRIBE,
+	NL80211_NAN_FUNC_FOLLOW_UP,
+
+	/* keep last */
+	__NL80211_NAN_FUNC_TYPE_AFTER_LAST,
+	NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1,
+};
+
+/**
+ * enum nl80211_nan_publish_type - NAN publish tx type
+ *
+ * Defines how to send publish Service Discovery Frames
+ *
+ * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited
+ * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited
+ */
+enum nl80211_nan_publish_type {
+	NL80211_NAN_SOLICITED_PUBLISH = 1 << 0,
+	NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1,
+};
+
+/**
+ * enum nl80211_nan_func_term_reason - NAN functions termination reason
+ *
+ * Defines termination reasons of a NAN function
+ *
+ * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user
+ * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout
+ * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored
+ */
+enum nl80211_nan_func_term_reason {
+	NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST,
+	NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED,
+	NL80211_NAN_FUNC_TERM_REASON_ERROR,
+};
+
+#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6
+#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff
+#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff
+
+/**
+ * enum nl80211_nan_func_attributes - NAN function attributes
+ * @__NL80211_NAN_FUNC_INVALID: invalid
+ * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8).
+ * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as
+ *	specified in NAN spec. This is a binary attribute.
+ * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is
+ *	publish. Defines the transmission type for the publish Service Discovery
+ *	Frame, see &enum nl80211_nan_publish_type. Its type is u8.
+ * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited
+ *	publish. Should the solicited publish Service Discovery Frame be sent to
+ *	the NAN Broadcast address. This is a flag.
+ * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is
+ *	subscribe. Is the subscribe active. This is a flag.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up.
+ *	The instance ID for the follow up Service Discovery Frame. This is u8.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
+ *	is follow up. This is a u8.
+ *	The requestor instance ID for the follow up Service Discovery Frame.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
+ *	follow up Service Discovery Frame. This is a binary attribute.
+ * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
+ *	close range. The range itself (RSSI) is defined by the device.
+ *	This is a flag.
+ * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should
+ *	stay active. If not present infinite TTL is assumed. This is a u32.
+ * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service
+ *	specific info. This is a binary attribute.
+ * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
+ *	See &enum nl80211_nan_srf_attributes.
+ * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested
+ *	attribute. It is a list of binary values.
+ * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a
+ *	nested attribute. It is a list of binary values.
+ * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function.
+ *	Its type is u8 and it cannot be 0.
+ * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason.
+ *	See &enum nl80211_nan_func_term_reason.
+ *
+ * @NUM_NL80211_NAN_FUNC_ATTR: internal
+ * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
+ */
+enum nl80211_nan_func_attributes {
+	__NL80211_NAN_FUNC_INVALID,
+	NL80211_NAN_FUNC_TYPE,
+	NL80211_NAN_FUNC_SERVICE_ID,
+	NL80211_NAN_FUNC_PUBLISH_TYPE,
+	NL80211_NAN_FUNC_PUBLISH_BCAST,
+	NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE,
+	NL80211_NAN_FUNC_FOLLOW_UP_ID,
+	NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID,
+	NL80211_NAN_FUNC_FOLLOW_UP_DEST,
+	NL80211_NAN_FUNC_CLOSE_RANGE,
+	NL80211_NAN_FUNC_TTL,
+	NL80211_NAN_FUNC_SERVICE_INFO,
+	NL80211_NAN_FUNC_SRF,
+	NL80211_NAN_FUNC_RX_MATCH_FILTER,
+	NL80211_NAN_FUNC_TX_MATCH_FILTER,
+	NL80211_NAN_FUNC_INSTANCE_ID,
+	NL80211_NAN_FUNC_TERM_REASON,
+
+	/* keep last */
+	NUM_NL80211_NAN_FUNC_ATTR,
+	NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1
+};
+
+/**
+ * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes
+ * @__NL80211_NAN_SRF_INVALID: invalid
+ * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
+ *	This is a flag.
+ * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
+ *	&NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
+ * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
+ *	&NL80211_NAN_SRF_BF is present. This is a u8.
+ * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
+ *	and only if &NL80211_NAN_SRF_BF isn't present. This is a nested
+ *	attribute. Each nested attribute is a MAC address.
+ * @NUM_NL80211_NAN_SRF_ATTR: internal
+ * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
+ */
+enum nl80211_nan_srf_attributes {
+	__NL80211_NAN_SRF_INVALID,
+	NL80211_NAN_SRF_INCLUDE,
+	NL80211_NAN_SRF_BF,
+	NL80211_NAN_SRF_BF_IDX,
+	NL80211_NAN_SRF_MAC_ADDRS,
+
+	/* keep last */
+	NUM_NL80211_NAN_SRF_ATTR,
+	NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1,
+};
+
+/**
+ * enum nl80211_nan_match_attributes - NAN match attributes
+ * @__NL80211_NAN_MATCH_INVALID: invalid
+ * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the
+ *	match. This is a nested attribute.
+ *	See &enum nl80211_nan_func_attributes.
+ * @NL80211_NAN_MATCH_FUNC_PEER: the peer function
+ *	that caused the match. This is a nested attribute.
+ *	See &enum nl80211_nan_func_attributes.
+ *
+ * @NUM_NL80211_NAN_MATCH_ATTR: internal
+ * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
+ */
+enum nl80211_nan_match_attributes {
+	__NL80211_NAN_MATCH_INVALID,
+	NL80211_NAN_MATCH_FUNC_LOCAL,
+	NL80211_NAN_MATCH_FUNC_PEER,
+
+	/* keep last */
+	NUM_NL80211_NAN_MATCH_ATTR,
+	NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
+};
+
+/**
+ * nl80211_external_auth_action - Action to perform with external
+ *     authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
+ * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
+ * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
+ */
+enum nl80211_external_auth_action {
+	NL80211_EXTERNAL_AUTH_START,
+	NL80211_EXTERNAL_AUTH_ABORT,
+};
+
 #endif /* __LINUX_NL80211_H */