Hi, this are some trivial zapping applications explaining how to use the frontend and demux API. They are also pretty useful to test your hardware. For DVB-S, Astra Channel config file: $ ./szap -c channels.conf-dvbs-astra n24 will tune to N24. For DVB-C, Berlin Cable channel config: $ ./czap -c channels.conf-dvbc-berlin Arte For DVB-T, Berlin Config: $ ./czap -c channels.conf-dvbt-berlin phoenix By default the MPEG stream is routed to a hardware decoder. If you want to record the stream to disk you will route it to the DVR device by using the '-r' option: $ ./czap -c channels.conf-dvbt-berlin phoenix -r [keep it running in one console] $ cat /dev/dvr/adapter0/dvr0 > /tmp/recording.ts [in a second console, will dump the MPEG transport stream to /tmp/recording.ts] The status messages have the following meaning: status 0x1f --- The demodulator status bits. 0x1f means all bits set, everything ok. signal [0x0000...0xffff] --- Signal Strength. Values above 0x8000 should be ok. snr [0x0000...0xffff] --- Signal/Noise Ratio. Values above 0x8000 are ok. ber [0...0xffffffff] --- Bit Error Rate. The less the better. unc [0...0xffffffff] --- Number of Uncorrectable Blocks. Small numbers are Preferable. If everything is alright and all frontend circuits are working stable (are locked) you should see a FE_HAS_LOCK in the rightmost line. Good luck, Holger da4229314e81632'>refslogtreecommitdiffstats
path: root/dvb-t/se-Kaxas (unfollow)
4-30 21:33:05 +0200'>2021-04-30
AgeCommit message (Expand)AuthorFilesLines
2017-01-05New upstream version 0+git20161227.ac7535aupstream/0+git20161227.ac7535aJonathan McCrohan39-1522/+4879
2016-06-11Imported Upstream version 0+git20160503.4f192bdupstream/0+git20160503.4f192bdJonathan McCrohan1307-2667/+38002
2016-01-18Imported Upstream version 0+git20151202.3864e0aupstream/0+git20151202.3864e0aJonathan McCrohan840-4057/+18230
2015-04-01Imported Upstream version 0+git20150208.f2053b3upstream/0+git20150208.f2053b3Jonathan McCrohan32-333/+483
2014-12-28Imported Upstream version 0+git20141218.b46a22cupstream/0+git20141218.b46a22cJonathan McCrohan535-639/+317
2014-10-15Imported Upstream version 0+git20141009.d26b627upstream/0+git20141009.d26b627Jonathan McCrohan2010-11120/+159271
2014-07-23Imported Upstream version 0+git20140611.14bd6c7upstream/0+git20140611.14bd6c7Jonathan McCrohan7-11/+60
2014-05-13Imported Upstream version 0+git20140512.1246b27upstream/0+git20140512.1246b27Jonathan McCrohan391-301/+3983
2014-04-05Imported Upstream version 0+git20140326.cfc2975upstream/0+git20140326.cfc2975Jonathan McCrohan118-656/+877
update Brazilian scan filesMauro Carvalho Chehab2476-12805/+69312
Data updated according with https://portalbsd.com.br/. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-30Remove legacy entriesMauro Carvalho Chehab129-24898/+0
There are several entries that used to be at Lyngsat. Several of them were merged with other entries. On others, there's no TV signal anymore. So, drop them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-30Add new satellites from LyngsatMauro Carvalho Chehab75-21/+29721
Those are are new satellite descriptions that didn't use to exist on Lyngsat. Add them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-30Rename a few satellites with two names and update frequenciesMauro Carvalho Chehab2-283/+182
Those two satellites have two names. Use Just one of them. While here, update their frequencies from Lyngsat. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-30Update frequencies from LyngsatMauro Carvalho Chehab188-12304/+12666
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>