Various small test/sample programs for the Linux DVB API Version 2/3
The default devices used by the test programs are generally
/dev/dvb/adapter0/*0, and can be overridden using environment
variables:
FRONTEND=/dev/dvb/adapter0/frontend0
DEMUX=/dev/dvb/adapter0/demux0
DVR=/dev/dvb/adapter0/dvr0
AUDIO=/dev/dvb/adapter0/audio0
VIDEO=/dev/dvb/adapter0/video0
NET=/dev/dvb/adapter0/net0
diseqc : Send various diseqc sequences on a SAT frontend.
Best used with a diseqc test box with some LEDs to
show the result of the commands.
set22k : Legacy tone switching for SAT frontends.
setvoltage : Legacy voltage switching for SAT frontends.
setpid : Set video and audio PIDs in the demux; useful only
if you have a hardware MPEG decoder.
video : A tiny video watching application, just starts capturing /dev/video
into /dev/fb0.
WARNING: May crash your box or mess up your console!
test_sections : Hex dump of section data from stream.
test_sec_ne : Like test_sections, but also test Not-Equal filter mode.
test_pes : Hex dump of PES data from stream.
test_tt : Demonstrate teletext decoding from PES data.
test_av : Test audio and video MPEG decoder API.
test_vevent : Test VIDEO_GET_EVENT and poll() for video events
test_stc : Test DMX_GET_STC.
test_stillimage : Display single iframes as stillimages
iframes can be created with the 'convert' tool from
imagemagick and mpeg2encode from ftp.mpeg.org, and must
have a supported size, e.g. 702x576
($ convert -sample 702x576\! test.jpg test.mpg)
test_av_play : Test playing MPEG PES (VDR format) from a file
test_dvr_play : Test playing MPEG TS from a file (don't try, driver is broken)
test :
test_audio :
test_dmx :
test_dvr :
test_front :
test_switch :
test_video : Play video-only file on /dev/dvb/adapter0/video0
ue='f5fca64371bdb7ffa1ca2c4d9bc0a49731dd39c1'/>