From ab959d7b4194715870128e616b8e29d4a101e488 Mon Sep 17 00:00:00 2001 From: etobi Date: Tue, 3 Sep 2013 09:48:41 +0200 Subject: Imported Upstream version 1.1.1+rev1207 --- lib/libdvbapi/dvbdemux.h | 204 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 204 insertions(+) create mode 100644 lib/libdvbapi/dvbdemux.h (limited to 'lib/libdvbapi/dvbdemux.h') diff --git a/lib/libdvbapi/dvbdemux.h b/lib/libdvbapi/dvbdemux.h new file mode 100644 index 0000000..808ee80 --- /dev/null +++ b/lib/libdvbapi/dvbdemux.h @@ -0,0 +1,204 @@ +/* + * libdvbdemux - a DVB demux library + * + * Copyright (C) 2005 Andrew de Quincey (adq_dvb@lidskialf.net) + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#ifndef LIBDVBDEMUX_H +#define LIBDVBDEMUX_H 1 + +#ifdef __cplusplus +extern "C" +{ +#endif + +#include + +/** + * Source of the data to be demuxed. + * + * FRONTEND. The data will be read from the frontend on the adapter. + * + * DVR. The data will be read from the DVR device of the adapter (of course, + * you need to write data TO the DVR device as well). + */ +#define DVBDEMUX_INPUT_FRONTEND 0 +#define DVBDEMUX_INPUT_DVR 1 + +/** + * Destination of the demuxed data. + * + * DECODER. Sends the data directly to a hardware decoder (if present). + * + * DEMUX. Sends the PID stream to the current demux file descriptor. HOWEVER, the + * data will be the payload *only* - transport stream headers will be stripped. + * + * DVR sends the data to the DVR device. The data will be the complete transport + * stream packets with headers intact. Note: if multiple filters specify + * DVBDEMUX_OUTPUT_DVR, the individual PID streams will be re-multiplexed + * together. + */ +#define DVBDEMUX_OUTPUT_DECODER 0 +#define DVBDEMUX_OUTPUT_DEMUX 1 +#define DVBDEMUX_OUTPUT_DVR 2 +#define DVBDEMUX_OUTPUT_TS_DEMUX 3 + +/** + * PES types. + */ +#define DVBDEMUX_PESTYPE_AUDIO 0 +#define DVBDEMUX_PESTYPE_VIDEO 1 +#define DVBDEMUX_PESTYPE_TELETEXT 2 +#define DVBDEMUX_PESTYPE_SUBTITLE 3 +#define DVBDEMUX_PESTYPE_PCR 4 + + +/** + * Open a demux device. Can be called multiple times. These let you setup a + * single filter per FD. It can can also be read() from if you use a section + * filter, or create a pes_filter or raw_filter with output DVBDEMUX_OUTPUT_DEMUX. + * + * @param adapter Index of the DVB adapter. + * @param demuxdevice Index of the demux device on that adapter (usually 0). + * @param nonblocking If 1, frontend will be opened in nonblocking mode. + * @return A unix file descriptor on success, or -1 on failure. + */ +extern int dvbdemux_open_demux(int adapter, int demuxdevice, int nonblocking); + +/** + * Open a DVR device. May be opened for writing or reading once. + * It is used to either write() transport stream data to be demuxed + * (if input == DVBDEMUX_INPUT_DVR), or to read() a stream of demuxed data + * (if output == DVBDEMUX_OUTPUT_DVR). + * + * Note, all demux filters with output set to DVBDEMUX_OUTPUT_DVR will be + * multiplexed together and output their data on this device. + * + * @param adapter Index of the DVB adapter. + * @param dvrdevice Index of the dvr device on that adapter (usually 0) + * @param readonly If 1, frontend will be opened in readonly mode only. + * @param nonblocking If 1, frontend will be opened in nonblocking mode. + * @return A unix file descriptor on success, or -1 on failure. + */ +extern int dvbdemux_open_dvr(int adapter, int dvrdevice, int readonly, int nonblocking); + +/** + * Set filter for the first 18 bytes of decoded SI table sections. Note that + * bytes 1 and 2 are _not_ filtered since they contain the length field. + * + * Conceptually, the driver computes the following for each filtered bit. + * + * (filter[X].bit[Y] & mask[X].bit[Y]) == (header[X].bit[Y] & mask[X].bit[Y]) + * + * Any sections which do not match this criteria for every bit will be discarded. + * + * The SI data is always read from the frontend, and is always returned by + * read()ing the demux fd. FIXME: check this statement! + * + * @param fd FD as opened with dvbdemux_open_demux() above. + * @param pid PID of the stream. + * @param filter The filter values of the first 18 bytes of the desired sections. + * @param mask Bitmask indicating which bits in the filter array should be tested + * (if a bit is 1, it will be tested). + * @param start If 1, the filter will be started immediately. Otherwise you must + * call dvbdemux_start() manually. + * @param checkcrc If 1, the driver will check the CRC on the table sections. + * Any bad sections will be dropped. + * @return 0 on success, nonzero on failure. + */ +extern int dvbdemux_set_section_filter(int fd, int pid, + uint8_t filter[18], uint8_t mask[18], + int start, int checkcrc); + +/** + * Set filter for a stream of PES data. This call can only used for cards + * equipped with a hardware decoder. + * + * @param fd FD as opened with dvbdemux_open_demux() above. + * @param pid PID of the stream. + * @param input One of DVBDEMUX_INPUT_*. + * @param output One of DVBDEMUX_OUTPUT_*. + * @param pestype One of DVBDEMUX_PESTYPE_* - this tells the decoder the type + * of data in this stream. + * @param start If 1, the filter will be started immediately. Otherwise you must + * call dvbdemux_start() manually. + * @return 0 on success, nonzero on failure. + */ +extern int dvbdemux_set_pes_filter(int fd, int pid, + int input, int output, + int pestype, + int start); + +/** + * Create a pid filter - this will extract transport stream packets for a + * specified PID. + * + * Note: The wildcard PID can only be used on "budget" cards. + * + * @param fd FD as opened with dvbdemux_open_demux() above. + * @param pid PID to retrieve, or use -1 as a wildcard for ALL PIDs. + * @param input One of DVBDEMUX_INPUT_*. + * @param output One of DVBDEMUX_OUTPUT_*. + * @param start If 1, the filter will be started immediately. Otherwise you must + * call dvbdemux_start() manually. + * @return 0 on success, nonzero on failure. + */ +extern int dvbdemux_set_pid_filter(int fd, int pid, + int input, int output, + int start); + +/** + * Start a demux going. + * + * @param fd FD as opened with dvbdemux_open_demux() above. + * @return 0 on success, nonzero on failure. + */ +extern int dvbdemux_start(int fd); + +/** + * Stop a demux. + * + * @param fd FD as opened with dvbdemux_open_demux() above. + * @return 0 on success, nonzero on failure. + */ +extern int dvbdemux_stop(int fd); + +/** + * Retrieve the current STC from the demux. This call can only used for cards + * equipped with a hardware decoder. + * + * @param fd FD as opened with dvbdemux_open_demux() above. + * @param stc Where to put the retrieved STC value (in 90kHz clock). + * @return 0 on success, nonzero on failure. + */ +extern int dvbdemux_get_stc(int fd, uint64_t *stc); + +/** + * Change the internal buffer size used by the demuxer. The default buffer size + * is 8192 bytes. Can only be used if the demux in question is stopped. + * + * @param fd FD as opened with dvbdemux_open_demux() above. + * @param bufsize New buffer size to use. + * @return 0 on success, nonzero on failure. + */ +extern int dvbdemux_set_buffer(int fd, int bufsize); + +#ifdef __cplusplus +} +#endif + +#endif // LIBDVBDEMUX_H -- cgit v1.2.3