linux-dvb-apps.git - linux-dvb-apps Debian packaging

about summary refs log tree commit diff stats

path: root/util/scan/dvb-t/se-Skelleftea (follow)

Age	Commit message (Expand)	Author	Files	Lines
2013-09-03	Imported Upstream version 1.1.1+rev1207upstream/1.1.1+rev1207	etobi	1	-0/+6

4' href='#n44'>44 45 46 47 48 49 50 51 52

Hi,

this are some trivial zapping applications explaining how to use the frontend
and demux API. They are also pretty useful to test your hardware.

For DVB-S, Astra Channel config file:

$ ./szap -c channels-conf/dvb-s/Astra-19.2E n24

will tune to N24. For DVB-C, Berlin Cable channel config:

$ ./czap -c channels-conf/dvb-c/de-Berlin Arte

For DVB-T, Berlin Config:

$ ./tzap -c channels-conf/dvb-t/de-Berlin phoenix

For ATSC, Raleigh Durham Config:

$ ./azap -c channels-conf/atsc/us-Raleigh-Durham WRAL

will tune to WRAL's Digital Channel 5-1.

By default the MPEG stream is routed to a hardware decoder. If you want to
record the stream to disk you will route it to the DVR device by using the
'-r' option:

$ ./tzap -c channels-conf/dvb-t/de-Berlin phoenix -r
[keep it running in one console]
$ cat /dev/dvb/adapter0/dvr0 > /tmp/recording.ts
[in a second console, will dump the MPEG transport stream to /tmp/recording.ts]

The status messages have the following meaning:

status 0x1f              --- The demodulator status bits.
			      0x1f means all bits set, everything ok.

signal [0x0000...0xffff] --- Signal Strength. Values above 0x8000 should be ok.

snr [0x0000...0xffff]    --- Signal/Noise Ratio. Values above 0x8000 are ok.

ber [0...0xffffffff]     --- Bit Error Rate. The less the better.

unc [0...0xffffffff]     --- Number of Uncorrectable Blocks.
			     Small numbers are Preferable.

If everything is alright and all frontend circuits are working stable
(are locked) you should see a FE_HAS_LOCK in the rightmost line.

Good luck,

Holger