diff options
Diffstat (limited to '')
| -rw-r--r-- | lib/libdvbsec/dvbsec_api.h | 436 |
1 files changed, 436 insertions, 0 deletions
diff --git a/lib/libdvbsec/dvbsec_api.h b/lib/libdvbsec/dvbsec_api.h new file mode 100644 index 0000000..7e454d7 --- /dev/null +++ b/lib/libdvbsec/dvbsec_api.h @@ -0,0 +1,436 @@ +/* + libdvbsec - an SEC library + + Copyright (C) 2005 Manu Abraham <abraham.manu@gmail.com> + Copyright (C) 2006 Andrew de Quincey <adq_dvb@lidskialf.net> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA +*/ + +#ifndef DVBSEC_API_H +#define DVBSEC_API_H 1 + +#include <stdint.h> + +struct dvbfe_handle; +struct dvbfe_parameters; + +enum dvbsec_diseqc_framing { + DISEQC_FRAMING_MASTER_NOREPLY = 0xE0, + DISEQC_FRAMING_MASTER_NOREPLY_REPEAT = 0xE1, + DISEQC_FRAMING_MASTER_REPLY = 0xE2, + DISEQC_FRAMING_MASTER_REPLY_REPEAT = 0xE3, + DISEQC_FRAMING_SLAVE_OK = 0xE4, + DISEQC_FRAMING_SLAVE_UNSUPPORTED = 0xE5, + DISEQC_FRAMING_SLAVE_PARITY_ERROR = 0xE6, + DISEQC_FRAMING_SLAVE_UNRECOGNISED = 0xE7, +}; + +enum dvbsec_diseqc_address { + DISEQC_ADDRESS_ANY_DEVICE = 0x00, + + DISEQC_ADDRESS_ANY_LNB_SWITCHER_SMATV = 0x10, + DISEQC_ADDRESS_LNB = 0x11, + DISEQC_ADDRESS_LNB_WITH_LOOP = 0x12, + DISEQC_ADDRESS_SWITCHER = 0x14, + DISEQC_ADDRESS_SWITCHER_WITH_LOOP = 0x15, + DISEQC_ADDRESS_SMATV = 0x18, + + DISEQC_ADDRESS_ANY_POLARISER = 0x20, + DISEQC_ADDRESS_LINEAR_POLARISER = 0x21, + + DISEQC_ADDRESS_ANY_POSITIONER = 0x30, + DISEQC_ADDRESS_POLAR_AZIMUTH_POSITIONER = 0x31, + DISEQC_ADDRESS_ELEVATION_POSITIONER = 0x32, + + DISEQC_ADDRESS_ANY_INSTALLER_AID = 0x40, + DISEQC_ADDRESS_SIGNAL_STRENGTH = 0x41, + + DISEQC_ADDRESS_ANY_INTERFACE = 0x70, + DISEQC_ADDRESS_HEADEND_INTERFACE = 0x71, + + DISEQC_ADDRESS_REALLOC_BASE = 0x60, + DISEQC_ADDRESS_OEM_BASE = 0xf0, +}; + +enum dvbsec_diseqc_reset { + DISEQC_RESET, + DISEQC_RESET_CLEAR, +}; + +enum dvbsec_diseqc_power { + DISEQC_POWER_OFF, + DISEQC_POWER_ON, +}; + +enum dvbsec_diseqc_listen { + DISEQC_LISTEN_SLEEP, + DISEQC_LISTEN_AWAKE, +}; + +enum dvbsec_diseqc_polarization { + DISEQC_POLARIZATION_UNCHANGED = 0, + DISEQC_POLARIZATION_H = 'h', + DISEQC_POLARIZATION_V = 'v', + DISEQC_POLARIZATION_L = 'l', + DISEQC_POLARIZATION_R = 'r', +}; + +enum dvbsec_diseqc_oscillator { + DISEQC_OSCILLATOR_UNCHANGED = 0, + DISEQC_OSCILLATOR_LOW, + DISEQC_OSCILLATOR_HIGH, +}; + +enum dvbsec_diseqc_switch { + DISEQC_SWITCH_UNCHANGED = 0, + DISEQC_SWITCH_A, + DISEQC_SWITCH_B, +}; + +enum dvbsec_diseqc_analog_id { + DISEQC_ANALOG_ID_A0, + DISEQC_ANALOG_ID_A1, +}; + +enum dvbsec_diseqc_drive_mode { + DISEQC_DRIVE_MODE_STEPS, + DISEQC_DRIVE_MODE_TIMEOUT, +}; + +enum dvbsec_diseqc_direction { + DISEQC_DIRECTION_EAST, + DISEQC_DIRECTION_WEST, +}; + +enum dvbsec_config_type { + DVBSEC_CONFIG_NONE = 0, + DVBSEC_CONFIG_POWER, + DVBSEC_CONFIG_STANDARD, + DVBSEC_CONFIG_ADVANCED, +}; + + +#define MAX_SEC_CMD_LEN 100 + +struct dvbsec_config +{ + char id[32]; /* ID of this SEC config structure */ + uint32_t switch_frequency; /* switching frequency - supply 0 for none. */ + uint32_t lof_lo_v; /* frequency to subtract for V + LOW band channels - or for switch_frequency == 0 */ + uint32_t lof_lo_h; /* frequency to subtract for H + LOW band channels - or for switch_frequency == 0 */ + uint32_t lof_lo_l; /* frequency to subtract for L + LOW band channels - or for switch_frequency == 0 */ + uint32_t lof_lo_r; /* frequency to subtract for R + LOW band channels - or for switch_frequency == 0 */ + uint32_t lof_hi_v; /* frequency to subtract for V + HIGH band channels */ + uint32_t lof_hi_h; /* frequency to subtract for H + HIGH band channels */ + uint32_t lof_hi_l; /* frequency to subtract for L + HIGH band channels */ + uint32_t lof_hi_r; /* frequency to subtract for R + HIGH band channels */ + + /** + * The SEC control to be used depends on the type: + * + * NONE - no SEC commands will be issued. (Frequency adjustment will still be performed). + * + * POWER - only the SEC power will be turned on. + * + * STANDARD - the standard DISEQC back compatable sequence is used. + * + * ADVANCED - SEC strings are supplied by the user describing the exact sequence + * of operations to use. + */ + enum dvbsec_config_type config_type; + + /* stuff for type == dvbsec_config_ADVANCED */ + char adv_cmd_lo_h[MAX_SEC_CMD_LEN]; /* ADVANCED SEC command to use for LOW/H. */ + char adv_cmd_lo_v[MAX_SEC_CMD_LEN]; /* ADVANCED SEC command to use for LOW/V. */ + char adv_cmd_lo_l[MAX_SEC_CMD_LEN]; /* ADVANCED SEC command to use for LOW/L. */ + char adv_cmd_lo_r[MAX_SEC_CMD_LEN]; /* ADVANCED SEC command to use for LOW/R. */ + char adv_cmd_hi_h[MAX_SEC_CMD_LEN]; /* ADVANCED SEC command to use for HI/H. */ + char adv_cmd_hi_v[MAX_SEC_CMD_LEN]; /* ADVANCED SEC command to use for HI/V. */ + char adv_cmd_hi_l[MAX_SEC_CMD_LEN]; /* ADVANCED SEC command to use for HI/L. */ + char adv_cmd_hi_r[MAX_SEC_CMD_LEN]; /* ADVANCED SEC command to use for HI/R. */ +}; + +/** + * Helper function for tuning adapters with SEC support. This function will do + * everything required, including frequency adjustment based on the parameters + * in sec_config. + * + * Note: Since the SEC configuration structure can be set to disable any SEC + * operations, this function can be reused for ALL DVB style devices (just + * set all LOF=0,type=dvbsec_config_NONE for devices which do not require + * SEC control). + * + * The sec configuration structures can be looked up using the dvbcfg_sec library. + * + * @param fe Frontend concerned. + * @param sec_config SEC configuration structure. May be NULL to disable SEC/frequency adjustment. + * @param polarization Polarization of signal. + * @param sat_pos Satellite position - only used if type == DISEQC_SEC_CONFIG_STANDARD. + * @param switch_option Switch option - only used if type == DISEQC_SEC_CONFIG_STANDARD. + * @param params Tuning parameters. + * @param timeout <0 => wait forever for lock. 0=>return immediately, >0=> + * number of milliseconds to wait for a lock. + * @return 0 on locked (or if timeout==0 and everything else worked), or + * nonzero on failure (including no lock). + */ +extern int dvbsec_set(struct dvbfe_handle *fe, + struct dvbsec_config *sec_config, + enum dvbsec_diseqc_polarization polarization, + enum dvbsec_diseqc_switch sat_pos, + enum dvbsec_diseqc_switch switch_option, + struct dvbfe_parameters *params, + int timeout); + +/** + * This will issue the standardised back-compatable DISEQC/SEC command + * sequence as defined in the DISEQC spec: + * + * i.e. tone off, set voltage, wait15, DISEQC, wait15, toneburst, wait15, set tone. + * + * @param fe Frontend concerned. + * @param oscillator Value to set the lo/hi switch to. + * @param polarization Value to set the polarisation switch to. + * @param sat_pos Value to set the satellite position switch to. + * @param switch_option Value to set the "swtch option" switch to. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_std_sequence(struct dvbfe_handle *fe, + enum dvbsec_diseqc_oscillator oscillator, + enum dvbsec_diseqc_polarization polarization, + enum dvbsec_diseqc_switch sat_pos, + enum dvbsec_diseqc_switch switch_option); + +/** + * Execute an SEC command string on the provided frontend. Please see the documentation + * in dvbsec_cfg.h on the command format, + * + * @param fe Frontend concerned. + * @param command The command to execute. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_command(struct dvbfe_handle *fe, char *command); + +/** + * Control the reset status of an attached DISEQC device. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param state The state to set. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_set_reset(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + enum dvbsec_diseqc_reset state); + +/** + * Control the power status of an attached DISEQC peripheral. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param state The state to set. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_set_power(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + enum dvbsec_diseqc_power state); + +/** + * Control the listening status of an attached DISEQC peripheral. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param state The state to set. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_set_listen(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + enum dvbsec_diseqc_listen state); + +/** + * Set the state of the committed switches of a DISEQC device. + * These are switches which are defined to have a standard name. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param oscillator Value to set the lo/hi switch to. + * @param polarization Value to set the polarization switch to. + * @param sat_pos Value to set the satellite position switch to. + * @param switch_option Value to set the switch option switch to. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_set_committed_switches(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + enum dvbsec_diseqc_oscillator oscillator, + enum dvbsec_diseqc_polarization polarization, + enum dvbsec_diseqc_switch sat_pos, + enum dvbsec_diseqc_switch switch_option); + +/** + * Set the state of the uncommitted switches of a DISEQC device. + * These provide another four switching possibilities. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param s1 Value to set the S1 switch to. + * @param s2 Value to set the S2 switch to. + * @param s3 Value to set the S3 switch to. + * @param s3 Value to set the S4 switch to. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_set_uncommitted_switches(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + enum dvbsec_diseqc_switch s1, + enum dvbsec_diseqc_switch s2, + enum dvbsec_diseqc_switch s3, + enum dvbsec_diseqc_switch s4); + +/** + * Set an analogue value. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param id The id of the analogue value to set. + * @param value The value to set. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_set_analog_value(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + enum dvbsec_diseqc_analog_id id, + uint8_t value); + +/** + * Set the desired frequency. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param frequency The frequency to set in GHz. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_set_frequency(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + uint32_t frequency); + +/** + * Set the desired channel. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param channel ID of the channel to set. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_set_channel(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + uint16_t channel); + +/** + * Halt the satellite positioner. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_halt_satpos(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address); + +/** + * Disable satellite positioner limits. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_disable_satpos_limits(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address); + +/** + * Set satellite positioner limits. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_set_satpos_limit(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + enum dvbsec_diseqc_direction direction); + +/** + * Drive satellite positioner motor. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param direction Direction to drive in. + * @param mode Drive mode to use + * (TIMEOUT=>value is a timeout in seconds, or STEPS=>value is a count of steps to use) + * @param value Value associated with the drive mode (range 0->127) + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_drive_satpos_motor(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + enum dvbsec_diseqc_direction direction, + enum dvbsec_diseqc_drive_mode mode, + uint8_t value); + +/** + * Store satellite positioner preset id at current position. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param id ID of the preset. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_store_satpos_preset(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + uint8_t id); + +/** + * Send a satellite positioner to a pre-set position. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param id ID of the preset. + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_goto_satpos_preset(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + uint8_t id); + +/** + * Recalculate satellite positions based on the current position, using + * magic positioner specific values. + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param val1 value1 (range 0->255, pass -1 to ignore). + * @param val2 value2 (range 0->255, pass -1 to ignore). + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_recalculate_satpos_positions(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + int val1, + int val2); + +/** + * Send a terrestrial aerial rotator to a particular bearing + * (0 degrees = north, fractional angles allowed). + * + * @param fe Frontend concerned. + * @param address Address of the device. + * @param angle Angle to rotate to (-256.0 -> 512.0) + * @return 0 on success, or nonzero on error. + */ +extern int dvbsec_diseqc_goto_rotator_bearing(struct dvbfe_handle *fe, + enum dvbsec_diseqc_address address, + float angle); + +#endif |