aboutsummaryrefslogtreecommitdiffstats
path: root/util/scan/scan.h
diff options
context:
space:
mode:
authorThomas Schmidt <tschmidt@debian.org>2005-12-15 13:26:37 +0100
committeretobi <git@e-tobi.net>2013-09-03 09:48:40 +0200
commit57526797f4dc18bab825b3492cc0d3034d3d58d3 (patch)
treec617a242cf689b9598a62e901ca47296f20e4937 /util/scan/scan.h
parente050b128f4466790054e1befdeab19a7d9e84e11 (diff)
downloadlinux-dvb-apps-57526797f4dc18bab825b3492cc0d3034d3d58d3.tar.gz
Imported Debian patch 1.1.0-9debian/1.1.0-9
Diffstat (limited to '')
0 files changed, 0 insertions, 0 deletions
'n148' href='#n148'>148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710
/* $Id: HD44780.c,v 1.46 2003/10/08 06:48:47 nicowallmeier Exp $
 *
 * driver for display modules based on the HD44780 chip
 *
 * Copyright 1999, 2000 Michael Reinelt <reinelt@eunet.at>
 *
 * This file is part of LCD4Linux.
 *
 * Modification for 4-Bit mode
 * 2003 Martin Hejl (martin@hejl.de)
 *
 * Modification for 2nd controller support
 * 2003 Jesse Brook Kovach <jkovach@wam.umd.edu>
 *
 *
 * LCD4Linux is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * LCD4Linux is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *
 * $Log: HD44780.c,v $
 * Revision 1.46  2003/10/08 06:48:47  nicowallmeier
 * special handling for 16x4 displays
 *
 * Revision 1.45  2003/10/08 06:45:00  nicowallmeier
 * Support of two displays of the same size
 *
 * Revision 1.44  2003/10/05 17:58:50  reinelt
 * libtool junk; copyright messages cleaned up
 *
 * Revision 1.43  2003/09/29 06:12:56  reinelt
 * changed default HD44780 wiring: unused signals are GND
 *
 * Revision 1.42  2003/09/21 06:43:02  reinelt
 *
 *
 * MatrixOrbital: bidirectional communication
 * HD44780: special handling for 16x1 displays (thanks to Maciej Witkowiak)
 *
 * Revision 1.41  2003/09/13 06:20:39  reinelt
 * HD44780 timings changed; deactivated libtool
 *
 * Revision 1.40  2003/09/11 04:09:52  reinelt
 * minor cleanups
 *
 * Revision 1.39  2003/09/10 03:48:22  reinelt
 * Icons for M50530, new processing scheme (Ticks.Text...)
 *
 * Revision 1.38  2003/09/09 11:47:47  reinelt
 * basic icon support for HD44780
 *
 * Revision 1.37  2003/09/09 06:54:43  reinelt
 * new function 'cfg_number()'
 *
 * Revision 1.36  2003/08/24 05:17:58  reinelt
 * liblcd4linux patch from Patrick Schemitz
 *
 * Revision 1.35  2003/08/22 03:45:08  reinelt
 * bug in parallel port code fixed, more icons stuff
 *
 * Revision 1.34  2003/08/19 05:23:55  reinelt
 * HD44780 dual-controller patch from Jesse Brook Kovach
 *
 * Revision 1.33  2003/08/19 04:28:41  reinelt
 * more Icon stuff, minor glitches fixed
 *
 * Revision 1.32  2003/08/16 07:31:35  reinelt
 * double buffering in all drivers
 *
 * Revision 1.31  2003/08/15 07:54:07  reinelt
 * HD44780 4 bit mode implemented
 *
 * Revision 1.30  2003/08/12 05:10:31  reinelt
 * first version of HD44780 4Bit-Mode patch
 *
 * Revision 1.29  2003/07/24 04:48:09  reinelt
 * 'soft clear' needed for virtual rows
 *
 * Revision 1.28  2003/04/07 06:02:58  reinelt
 * further parallel port abstraction
 *
 * Revision 1.27  2003/04/04 06:01:59  reinelt
 * new parallel port abstraction scheme
 *
 * Revision 1.26  2003/02/22 07:53:09  reinelt
 * cfg_get(key,defval)
 *
 * Revision 1.25  2002/08/19 09:11:34  reinelt
 * changed HD44780 to use generic bar functions
 *
 * Revision 1.24  2002/08/19 07:36:29  reinelt
 *
 * finished bar.c, USBLCD is the first driver that uses the generic bar functions
 *
 * Revision 1.23  2002/08/19 04:41:20  reinelt
 * introduced bar.c, moved bar stuff from display.h to bar.h
 *
 * Revision 1.22  2002/08/17 14:14:21  reinelt
 *
 * USBLCD fixes
 *
 * Revision 1.21  2002/04/30 07:20:15  reinelt
 *
 * implemented the new ndelay(nanoseconds) in all parallel port drivers
 *
 * Revision 1.20  2001/09/09 12:26:03  reinelt
 * GPO bug: INIT is _not_ inverted
 *
 * Revision 1.19  2001/03/15 15:49:22  ltoetsch
 * fixed compile HD44780.c, cosmetics
 *
 * Revision 1.18  2001/03/15 09:47:13  reinelt
 *
 * some fixes to ppdef
 * off-by-one bug in processor.c fixed
 *
 * Revision 1.17  2001/03/14 16:47:41  reinelt
 * minor cleanups
 *
 * Revision 1.16  2001/03/14 15:30:53  reinelt
 *
 * make ppdev compatible to earlier kernels
 *
 * Revision 1.15  2001/03/14 15:14:59  reinelt
 * added ppdev parallel port access
 *
 * Revision 1.14  2001/03/12 13:44:58  reinelt
 *
 * new udelay() using Time Stamp Counters
 *
 * Revision 1.13  2001/03/12 12:39:36  reinelt
 *
 * reworked autoconf a lot: drivers may be excluded, #define's went to config.h
 *
 * Revision 1.12  2001/02/14 07:40:16  reinelt
 *
 * first (incomplete) GPO implementation
 *
 * Revision 1.11  2001/02/13 12:43:24  reinelt
 *
 * HD_gpo() was missing
 *
 * Revision 1.10  2001/02/13 09:00:13  reinelt
 *
 * prepared framework for GPO's (general purpose outputs)
 *
 * Revision 1.9  2000/10/20 07:17:07  reinelt
 *
 *
 * corrected a bug in HD_goto()
 * Thanks to Gregor Szaktilla <gregor@szaktilla.de>
 *
 * Revision 1.8  2000/08/10 09:44:09  reinelt
 *
 * new debugging scheme: error(), info(), debug()
 * uses syslog if in daemon mode
 *
 * Revision 1.7  2000/08/09 09:50:29  reinelt
 *
 * opened 0.98 development
 * removed driver-specific signal-handlers
 * added 'quit'-function to driver structure
 * added global signal-handler
 *
 * Revision 1.6  2000/07/31 10:43:44  reinelt
 *
 * some changes to support kernel-2.4 (different layout of various files in /proc)
 *
 * Revision 1.5  2000/07/31 06:46:35  reinelt
 *
 * eliminated some compiler warnings with glibc
 *
 * Revision 1.4  2000/04/15 16:56:52  reinelt
 *
 * moved delay loops to udelay.c
 * renamed -d (debugging) switch to -v (verbose)
 * new switch -d to calibrate delay loop
 * 'Delay' entry for HD44780 back again
 * delay loops will not calibrate automatically, because this will fail with hich CPU load
 *
 * Revision 1.3  2000/04/15 11:13:54  reinelt
 *
 * added '-d' (debugging) switch
 * added several debugging messages
 * removed config entry 'Delay' for HD44780 driver
 * delay loop for HD44780 will be calibrated automatically
 *
 * Revision 1.2  2000/04/13 06:09:52  reinelt
 *
 * added BogoMips() to system.c (not used by now, maybe sometimes we can
 * calibrate our delay loop with this value)
 *
 * added delay loop to HD44780 driver. It seems to be quite fast now. Hopefully
 * no compiler will optimize away the delay loop!
 *
 * Revision 1.1  2000/04/12 08:05:45  reinelt
 *
 * first version of the HD44780 driver
 *
 */

/* 
 *
 * exported fuctions:
 *
 * struct LCD HD44780[]
 *
 */

#include "config.h"

#include <stdlib.h>
#include <stdio.h>
#include <string.h>

#include "debug.h"
#include "cfg.h"
#include "display.h"
#include "bar.h"
#include "icon.h"
#include "parport.h"
#include "udelay.h"

#define XRES 5
#define YRES 8
#define CHARS 8



/* low level communication timings [nanoseconds]
 * as these values differ from spec to spec,
 * we use the worst-case values.
 */

#define T_CYCLE 1000 // Enable cycle time
#define T_PW     450 // Enable pulse width
#define T_AS      60 // Address setup time
#define T_H       40 // Data hold time


/* HD44780 execution timings [microseconds]
 * as these values differ from spec to spec,
 * we use the worst-case values.
 */

#define T_INIT1 4100 // first init sequence:  4.1 msec
#define T_INIT2  100 // second init sequence: 100 usec
#define T_EXEC    80 // normal execution time
#define T_WRCG   120 // CG RAM Write
#define T_CLEAR 1640 // Clear Display


static LCD Lcd;
static int Icons;
static int Bits=0;
static int GPO=0;
static int Controllers = 0;
static int Controller  = 0;

static char *FrameBuffer1=NULL;
static char *FrameBuffer2=NULL;

static unsigned char SIGNAL_RW;
static unsigned char SIGNAL_RS;
static unsigned char SIGNAL_ENABLE;
static unsigned char SIGNAL_ENABLE2;
static unsigned char SIGNAL_GPO;

static void HD_nibble(unsigned char controller, unsigned char nibble)
{
  unsigned char enable;

  // enable signal: 'controller' is a bitmask
  // bit 0 .. send to controller #0
  // bit 1 .. send to controller #1
  // so we can send a byte to both controllers at the same time!
  enable=0;
  if (controller&0x01) enable|=SIGNAL_ENABLE;
  if (controller&0x02) enable|=SIGNAL_ENABLE2;
  
  // clear ENABLE
  // put data on DB1..DB4
  // nibble already contains RS bit!
  parport_data(nibble);

  // Address set-up time
  ndelay(T_AS);
  
  // rise ENABLE
  parport_data(nibble | enable);
  
  // Enable pulse width
  ndelay(T_PW);

  // lower ENABLE
  parport_data(nibble);
}


static void HD_byte (unsigned char controller, unsigned char data, unsigned char RS)
{
  // send high nibble of the data
  HD_nibble (controller, ((data>>4)&0x0f)|RS);

  // Make sure we honour T_CYCLE
  ndelay(T_CYCLE-T_AS-T_PW);

  // send low nibble of the data
  HD_nibble(controller, (data&0x0f)|RS);
}


static void HD_command (unsigned char controller, unsigned char cmd, int delay)
{
  unsigned char enable;
   
  if (Bits==8) {
    
    // enable signal: 'controller' is a bitmask
    // bit 0 .. send to controller #0
    // bit 1 .. send to controller #1
    // so we can send a byte to both controllers at the same time!
    enable=0;
    if (controller&0x01) enable|=SIGNAL_ENABLE;
    if (controller&0x02) enable|=SIGNAL_ENABLE2;
    
    // put data on DB1..DB8
    parport_data (cmd);
  
    // clear RW and RS
    parport_control (SIGNAL_RW | SIGNAL_RS, 0);
    
    // Address set-up time
    ndelay(T_AS);

    // send command
    parport_toggle (enable, 1, T_PW);
    
  } else {

    HD_byte (controller, cmd, 0);

  }
  
  // wait for command completion
  udelay(delay);

}


static void HD_write (unsigned char controller, char *string, int len, int delay)
{
  unsigned char enable;

  // sanity check
  if (len<=0) return;

  if (Bits==8) {

    // enable signal: 'controller' is a bitmask
    // bit 0 .. send to controller #0
    // bit 1 .. send to controller #1
    // so we can send a byte to both controllers at the same time!
    enable=0;
    if (controller&0x01) enable|=SIGNAL_ENABLE;
    if (controller&0x02) enable|=SIGNAL_ENABLE2;
    
    // clear RW, set RS
    parport_control (SIGNAL_RW | SIGNAL_RS, SIGNAL_RS);

    // Address set-up time
    ndelay(T_AS);
    
    while (len--) {
      
      // put data on DB1..DB8
      parport_data (*(string++));
      
      // send command
      parport_toggle (enable, 1, T_PW);
      
      // wait for command completion
      udelay(delay);
    }
    
  } else { // 4 bit mode
    
    while (len--) {

      // send data with RS enabled
      HD_byte (controller, *(string++), SIGNAL_RS);
      
      // wait for command completion
      udelay(delay);
    }
  }
}


static void HD_setGPO (int bits)
{
  if (Lcd.gpos>0) {
    
    // put data on DB1..DB8
    parport_data (bits);
    
    // 74HCT573 set-up time
    ndelay(20);
    
    // send data
    // 74HCT573 enable pulse width = 24ns
    parport_toggle (SIGNAL_GPO, 1, 230);
  }
}


static void HD_define_char (int ascii, char *buffer)
{
  // define chars on *both* controllers!
  HD_command (0x03, 0x40|8*ascii, T_EXEC);
  HD_write (0x03, buffer, 8, T_WRCG);
}


int HD_clear (int full)
{

  memset (FrameBuffer1, ' ', Lcd.rows*Lcd.cols*sizeof(char));

  icon_clear();
  bar_clear();

  GPO=0;
  
  if (full) {
    memset (FrameBuffer2, ' ', Lcd.rows*Lcd.cols*sizeof(char));
    HD_command (0x03, 0x01, T_CLEAR); // clear *both* displays
    HD_command (0x03, 0x03, T_CLEAR); // return home
    HD_setGPO (GPO);                  // all GPO's off
  }
  
  return 0;
}


int HD_init (LCD *Self)
{
  int rows=-1, cols=-1, gpos=-1;
  char *s;
  
  s=cfg_get("Size",NULL);
  if (s==NULL || *s=='\0') {
    error ("HD44780: no 'Size' entry in %s", cfg_source());
    return -1;
  }
  if (sscanf(s,"%dx%d",&cols,&rows)!=2 || rows<1 || cols<1) {
    error ("HD44780: bad size '%s'",s);
    return -1;
  }
  
  if (cfg_number("GPOs", 0, 0, 8, &gpos)<0) return -1;
  info ("HD44780: controlling %d GPO's", gpos);

  if (cfg_number("Controllers", 1, 1, 2, &Controllers)<0) return -1;
  info ("wiring: using display with %d controllers", Controllers);
  
  // current controller
  Controller=1;
  
  Self->rows=rows;
  Self->cols=cols;
  Self->gpos=gpos;
  Lcd=*Self;
  
  // Init the framebuffers
  FrameBuffer1 = (char*)malloc(Lcd.cols*Lcd.rows*sizeof(char));
  FrameBuffer2 = (char*)malloc(Lcd.cols*Lcd.rows*sizeof(char));
  if (FrameBuffer1==NULL || FrameBuffer2==NULL) {
    error ("HD44780: framebuffer could not be allocated: malloc() failed");
    return -1;
  }
  
  if (cfg_number("Bits", 8, 4, 8, &Bits)<0) return -1;
  if (Bits!=4 && Bits!=8) {
    error ("HD44780: bad Bits '%s' in %s, should be '4' or '8'", s, cfg_source());
    return -1;
  }    
  info ("wiring: using %d bit mode", Bits);
  
  if (Bits==8) {
    if ((SIGNAL_RS      = parport_wire_ctrl ("RS",      "AUTOFD"))==0xff) return -1;
    if ((SIGNAL_RW      = parport_wire_ctrl ("RW",      "GND"   ))==0xff) return -1;
    if ((SIGNAL_ENABLE  = parport_wire_ctrl ("ENABLE",  "STROBE"))==0xff) return -1;
    if ((SIGNAL_ENABLE2 = parport_wire_ctrl ("ENABLE2", "GND"   ))==0xff) return -1;
    if ((SIGNAL_GPO     = parport_wire_ctrl ("GPO",     "GND"   ))==0xff) return -1;
  } else {
    if ((SIGNAL_RS      = parport_wire_data ("RS",      "DB4"))==0xff) return -1;
    if ((SIGNAL_RW      = parport_wire_data ("RW",      "DB5"))==0xff) return -1;
    if ((SIGNAL_ENABLE  = parport_wire_data ("ENABLE",  "DB6"))==0xff) return -1;
    if ((SIGNAL_ENABLE2 = parport_wire_data ("ENABLE2", "GND"))==0xff) return -1;
    if ((SIGNAL_GPO     = parport_wire_data ("GPO",     "GND"))==0xff) return -1;
  }
  
  if (parport_open() != 0) {
    error ("HD44780: could not initialize parallel port!");
    return -1;
  }

  // clear all signals
  if (Bits==8) {
    parport_control (SIGNAL_RS|SIGNAL_RW|SIGNAL_ENABLE|SIGNAL_ENABLE2|SIGNAL_GPO, 0);
  } else {
    parport_data (0);
  }

  // set direction: write
  parport_direction (0);

  // initialize *both* displays
  if (Bits==8) {
    HD_command (0x03, 0x30, T_INIT1); // 8 Bit mode, wait 4.1 ms
    HD_command (0x03, 0x30, T_INIT2); // 8 Bit mode, wait 100 us
    HD_command (0x03, 0x38, T_EXEC);  // 8 Bit mode, 1/16 duty cycle, 5x8 font
  } else {
    HD_nibble(0x03, 0x03); udelay(T_INIT1); // 4 Bit mode, wait 4.1 ms
    HD_nibble(0x03, 0x03); udelay(T_INIT2); // 4 Bit mode, wait 100 us
    HD_nibble(0x03, 0x03); udelay(T_INIT1); // 4 Bit mode, wait 4.1 ms
    HD_nibble(0x03, 0x02); udelay(T_INIT2); // 4 Bit mode, wait 100 us
    HD_command (0x03, 0x28, T_EXEC);	    // 4 Bit mode, 1/16 duty cycle, 5x8 font
  }
  
  HD_command (0x03, 0x08, T_EXEC);  // Display off, cursor off, blink off
  HD_command (0x03, 0x0c, T_CLEAR); // Display on, cursor off, blink off, wait 1.64 ms
  HD_command (0x03, 0x06, T_EXEC);  // curser moves to right, no shift

  if (cfg_number("Icons", 0, 0, CHARS, &Icons)<0) return -1;
  if (Icons>0) {
    debug ("reserving %d of %d user-defined characters for icons", Icons, CHARS);
    icon_init(Lcd.rows, Lcd.cols, XRES, YRES, CHARS, Icons, HD_define_char);
    Self->icons=Icons;
    Lcd.icons=Icons;
  }
  
  bar_init(rows, cols, XRES, YRES, CHARS-Icons);
  bar_add_segment(  0,  0,255, 32); // ASCII  32 = blank
  bar_add_segment(255,255,255,255); // ASCII 255 = block
  
  HD_clear(1);
  
  return 0;
}


void HD_goto (int row, int col)
{
  int pos;

  if (Controllers>1 && row>=Lcd.rows/2) {
    row -= Lcd.rows/2;
    Controller = 2;
  } else {
    Controller = 1;
  }
   
  // 16x1 Displays are organized as 8x2 :-(
  if (Lcd.rows==1 && Lcd.cols==16 && col>7) {
    row++;
    col-=8;
  }
  
  if (Lcd.rows==4 && Lcd.cols==16) {
  	pos=(row%2)*64+(row/2)*16+col;
  } else {  
    pos=(row%2)*64+(row/2)*20+col;
  }
  
  HD_command (Controller, (0x80|pos), T_EXEC);
}


int HD_put (int row, int col, char *text)
{
  char *p=FrameBuffer1+row*Lcd.cols+col;
  char *t=text;
  
  while (*t && col++<=Lcd.cols) {
    *p++=*t++;
  }
  return 0;
}


int HD_bar (int type, int row, int col, int max, int len1, int len2)
{
  return bar_draw (type, row, col, max, len1, len2);
}


int HD_icon (int num, int seq, int row, int col)
{
  return icon_draw (num, seq, row, col);
}


int HD_gpo (int num, int val)
{
  if (num>=Lcd.gpos) 
    return -1;

  if (val) {
    GPO |= 1<<num;     // set bit
  } else {
    GPO &= ~(1<<num);  // clear bit
  }
  return 0;
}


int HD_flush (void)
{
  int row, col, pos1, pos2;
  int c, equal;
  
  bar_process(HD_define_char);

  for (row=0; row<Lcd.rows; row++) {
    for (col=0; col<Lcd.cols; col++) {
      c=bar_peek(row, col);
      if (c==-1) c=icon_peek(row, col);
      if (c!=-1) {
	FrameBuffer1[row*Lcd.cols+col]=(char)c;
      }
    }
    for (col=0; col<Lcd.cols; col++) {
      if (FrameBuffer1[row*Lcd.cols+col]==FrameBuffer2[row*Lcd.cols+col]) continue;
      HD_goto (row, col);
      for (pos1=col++, pos2=pos1, equal=0; col<Lcd.cols; col++) {
	if (FrameBuffer1[row*Lcd.cols+col]==FrameBuffer2[row*Lcd.cols+col]) {
	  // If we find just one equal byte, we don't break, because this 
	  // would require a goto, which takes one byte, too.
	  if (++equal>2) break;
	} else {
	  pos2=col;
	  equal=0;
	}
	// special handling of 16x1 displays
	if (Lcd.rows==1 && Lcd.cols==16 && col==7) {
	  break;
	}
      }
      HD_write (Controller, FrameBuffer1+row*Lcd.cols+pos1, pos2-pos1+1, T_EXEC);
    }
  }

  memcpy (FrameBuffer2, FrameBuffer1, Lcd.rows*Lcd.cols*sizeof(char));

  HD_setGPO(GPO);

  return 0;
}


int HD_quit (void)
{
  info("HD44780: shutting down.");

  if (FrameBuffer1) {
    free(FrameBuffer1);
    FrameBuffer1=NULL;
  }

  if (FrameBuffer2) {
    free(FrameBuffer2);
    FrameBuffer2=NULL;
  }

  return parport_close();
}


LCD HD44780[] = {
  { name: "HD44780",
    rows:  0,
    cols:  0,
    xres:  XRES,
    yres:  YRES,
    bars:  BAR_L | BAR_R | BAR_U | BAR_D | BAR_H2,
    icons: 0,
    gpos:  0,
    init:  HD_init,
    clear: HD_clear,
    put:   HD_put,
    bar:   HD_bar,
    icon:  HD_icon,
    gpo:   HD_gpo,
    flush: HD_flush,
    quit:  HD_quit 
  },
  { NULL }
};