/*
 * Copyright 2011 Phidgets Inc.  All rights reserved.
 */
 
 #include "javamacros.h"
PACKAGEIMPORTS
/**
 * This class represents a Phidget Bridge. All methods
 * to manipulate the Phidget Bridge are implemented in this class.
 * <p>
 * 
 * @author Phidgets Inc.
 */
CLASSDEF(Bridge)
	/**
	 * 1 Gain. This is used with {@link #getGain(int) getGain} and {@link #setGain(int, int) setGain}
	 */
	public static final int PHIDGET_BRIDGE_GAIN_1 = 1;
	/**
	 * 8 Gain. This is used with {@link #getGain(int) getGain} and {@link #setGain(int, int) setGain}
	 */
	public static final int PHIDGET_BRIDGE_GAIN_8 = 2;
	/**
	 * 16 Gain. This is used with {@link #getGain(int) getGain} and {@link #setGain(int, int) setGain}
	 */
	public static final int PHIDGET_BRIDGE_GAIN_16 = 3;
	/**
	 * 32 Gain. This is used with {@link #getGain(int) getGain} and {@link #setGain(int, int) setGain}
	 */
	public static final int PHIDGET_BRIDGE_GAIN_32 = 4;
	/**
	 * 64 Gain. This is used with {@link #getGain(int) getGain} and {@link #setGain(int, int) setGain}
	 */
	public static final int PHIDGET_BRIDGE_GAIN_64 = 5;
	/**
	 * 128 Gain. This is used with {@link #getGain(int) getGain} and {@link #setGain(int, int) setGain}
	 */
	public static final int PHIDGET_BRIDGE_GAIN_128 = 6;
	/**
	 * Unknown Gain. This is used with {@link #getGain(int) getGain} and {@link #setGain(int, int) setGain}
	 */
	public static final int PHIDGET_BRIDGE_GAIN_UNKNOWN = 7;
	/**
	 * Returns the number of bridges.
	 * @return Number of bridges
	 */
	PUBLIC_NATIVE(int, getInputCount,)
	/**
	 * Returns the value of the selected input, in mV/V. If the input is not enabled, an EPHIDGET_UNKNOWNVAL exception will be thrown. If the bridge is saturated
	 *, this will be equal to BridgeMax or BridgeMin and an error event will be fired - in this case, gain should be reduced if possible.
	 * @param index Index of the bridge
	 * @return bridge value
	 * @throws PhidgetException If this Phidget is not opened and attached, or if the index is out of range. 
	 * See {@link com.phidgets.Phidget#open(int) open} for information on determining if a device is attached.
	 */
	PUBLIC_NATIVE(double, getBridgeValue, int index)
		/**
	 * Returns the minimum value that the selected bridge can measure, in mV/V. This value will depend on the selected gain. At a gain of 1, BridgeMin == -1000 mV/V.
	 * @param index Index of the bridge
	 * @return minimum value 
	 * @throws PhidgetException If this Phidget is not opened and attached, or if the index is out of range. 
	 * See {@link com.phidgets.Phidget#open(int) open} for information on determining if a device is attached.
	 */
	PUBLIC_NATIVE(double, getBridgeMin, int index)
	/**
	 * Returns the maximum value that the selected bridge can measure, in mV/V. This value will depend on the selected gain. At a gain of 1, BridgeMin == 1000 mV/V.
	 * @param index Index of the bridge
	 * @return maximum value 
	 * @throws PhidgetException If this Phidget is not opened and attached, or if the index is out of range. 
	 * See {@link com.phidgets.Phidget#open(int) open} for information on determining if a device is attached.
	 */
	PUBLIC_NATIVE(double, getBridgeMax, int index)
	/**
	 * Returns the enabled state of the specified bridge. This applies power between +5v and Ground, and starts measuring the differential on the +/- pins. By default, all bridges are 
	 * disabled, and need to be explicitly enabled on startup.
	 * @param index Index of the bridge
	 * @return state of the specified bridge
	 * @throws PhidgetException If this Phidget is not opened and attached, or if the index is invalid. 
	 * See {@link com.phidgets.Phidget#open(int) open} for information on determining if a device is attached.
	 */
	PUBLIC_NATIVE(boolean, getEnabled, int index)  
	/**
	 * Sets the enabled state of the specified bridge. This applies power between +5v and Ground, and starts measuring the differential on the +/- pins. By default, all bridges are 
	 * disabled, and need to be explicitly enabled on startup.
	 * @param index Index of the bridge
	 * @param state new state of the specified bridge
	 * @throws PhidgetException If this Phidget is not opened and attached, or if the index is invalid. 
	 * See {@link com.phidgets.Phidget#open(int) open} for information on determining if a device is attached.
	 */
	PUBLIC_NATIVE(void, setEnabled, int index, boolean state)
	/**
	 * Returns the gain for the selected bridge.  Note that increasing the gains will reduce the measurable
	 * voltage difference by the gain factor, with +-1000 mV/V being the maximum, with no gain.
	 * The possible values for gain are {@link #PHIDGET_BRIDGE_GAIN_1 PHIDGET_BRIDGE_GAIN_1},
	 * {@link #PHIDGET_BRIDGE_GAIN_8 PHIDGET_BRIDGE_GAIN_8}, {@link #PHIDGET_BRIDGE_GAIN_16 PHIDGET_BRIDGE_GAIN_16},
	 * {@link #PHIDGET_BRIDGE_GAIN_32 PHIDGET_BRIDGE_GAIN_32}, {@link #PHIDGET_BRIDGE_GAIN_64 PHIDGET_BRIDGE_GAIN_64},
	 * {@link #PHIDGET_BRIDGE_GAIN_128 PHIDGET_BRIDGE_GAIN_128}, {@link #PHIDGET_BRIDGE_GAIN_UNKNOWN PHIDGET_BRIDGE_GAIN_UNKNOWN}
	 * <p>
	 * @param index Index of the bridge
	 * @return gain
	 * @throws PhidgetException If this Phidget is not opened and attached, or if the index is invalid. 
	 * See {@link com.phidgets.Phidget#open(int) open} for information on determining if a device is attached.
	 */
	PUBLIC_NATIVE(int, getGain, int index)
	/**
	 * Sets the gain for the selected bridge.  Note that increasing the gains will reduce the measurable
	 * voltage difference by the gain factor, with +-1000 mV/V being the maximum, with no gain.
	 * <p>
	 * The possible values for gain are {@link #PHIDGET_BRIDGE_GAIN_1 PHIDGET_BRIDGE_GAIN_1},
	 * {@link #PHIDGET_BRIDGE_GAIN_8 PHIDGET_BRIDGE_GAIN_8}, {@link #PHIDGET_BRIDGE_GAIN_16 PHIDGET_BRIDGE_GAIN_16},
	 * {@link #PHIDGET_BRIDGE_GAIN_32 PHIDGET_BRIDGE_GAIN_32}, {@link #PHIDGET_BRIDGE_GAIN_64 PHIDGET_BRIDGE_GAIN_64},
	 * {@link #PHIDGET_BRIDGE_GAIN_128 PHIDGET_BRIDGE_GAIN_128}, {@link #PHIDGET_BRIDGE_GAIN_UNKNOWN PHIDGET_BRIDGE_GAIN_UNKNOWN}
	 * <p>
	 * @param index Index of the bridge
	 * @param gain new gain
	 * @throws PhidgetException If this Phidget is not opened and attached, or if the index is invalid. 
	 * See {@link com.phidgets.Phidget#open(int) open} for information on determining if a device is attached.
	 */
	PUBLIC_NATIVE(void, setGain, int index, int gain)
	/**
	 * Returns the data rate, in ms. Data rate applies to all 4 bridges simultaneously. Setting a slower data rate will reduce
	 * noise at the cost of sample time. Also note that each bridge is being sampled only 1/4 of the time - this is okay for very stable signals,
	 * but for changing signals, it is best to set a higher sampling rate and do averaging in the software. 
	 * <p>
	 * Data rate must be a multiple of 8ms. Trying to set something between multiplies of 8 will cause an EPHIDGET_INVALIDARG exception.
	 * <p>
	 * @return Data Rate
	 * @throws PhidgetException If this Phidget is not opened and attached, or if the index is invalid. 
	 * See {@link com.phidgets.Phidget#open(int) open} for information on determining if a device is attached.
	 */
	PUBLIC_NATIVE(int, getDataRate,)	
	/**
	 * Sets the data rate, in ms. Data rate applies to all 4 bridges simultaneously. Setting a slower data rate will reduce
	 * noise at the cost of sample time. Also note that each bridge is being sampled only 1/4 of the time - this is okay for very stable signals,
	 * but for changing signals, it is best to set a higher sampling rate and do averaging in the software.
	 * <p>
	 * Data rate must be a multiple of 8ms. Trying to set something between multiplies of 8 will cause an EPHIDGET_INVALIDARG exception.
	 * <p>
	 * @param rate new data rate
	 * @throws PhidgetException If this Phidget is not opened and attached, or if the data rate is out of range 
	 * See {@link com.phidgets.Phidget#open(int) open} for information on determining if a device is attached.
	 */
	PUBLIC_NATIVE(void, setDataRate, int rate)
	/**
	 * Gets the minimum supported data rate, in ms.
	 * @return minimum supported data rate
	 * @throws PhidgetException If this Phidget is not opened and attached.
	 * See {@link com.phidgets.Phidget#open(int) open} for information on determining if a device is attached.
	 */
	PUBLIC_NATIVE(int, getDataRateMin,)
	/**
	 * Gets the maximum supported data rate, in ms.
	 * @return maximum supported data rate
	 * @throws PhidgetException If this Phidget is not opened and attached.
	 * See {@link com.phidgets.Phidget#open(int) open} for information on determining if a device is attached.
	 */
	PUBLIC_NATIVE(int, getDataRateMax,)
	
	ENABLE_EVENTS
	{
		EVENT_ENABLE(bridgeData, BridgeData)
	}
	/**
	 * Adds a bridge data listener. The bridge data handler is a method that will be called at the specified data rate, for each enabled bridge. Value is the bridgeValue, in mV/V.
	 * <p>
	 * There is no limit on the number of bridge data handlers that can be registered for a particular Phidget.
	 * 
	 * @param l An implemetation of the {@link com.phidgets.event.BridgeDataListener BridgeDataListener} interface
	 */
	EVENT(bridgeData, BridgeData, bridgeData)
}