#! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2009-04-28.21; # UTC # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, # 2008, 2009 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and \`g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; esac # normalize program name to check for. program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). This is about non-GNU programs, so use $1 not # $program. case $1 in lex*|yacc*) # Not GNU programs, they don't have --version. ;; tar*) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi if test ! -f y.tab.h; then echo >y.tab.h fi if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit $? fi ;; makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n ' /^@setfilename/{ s/.* \([^ ]*\) *$/\1/ p q }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 touch $file ;; tar*) shift # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: rg/svn/lcd4linux/trunk@533 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-04-24[lcd4linux @ 2005-04-24 04:41:28 by reinelt]reinelt1-0/+68 Changelog updated git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@532 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-04-24[lcd4linux @ 2005-04-24 04:33:46 by reinelt]reinelt9-10/+444 driver for TREFON USB LCD's added git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@531 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-04-20[lcd4linux @ 2005-04-20 05:49:21 by reinelt]reinelt1-44/+125 Changed the code to add some VT100-compatible control sequences (see the comments above). A configfile boolean option 'VT100_Support' (default to 1) indicate if the display in used support these control-sequences or not. git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@530 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-04-09[lcd4linux @ 2005-04-09 07:36:42 by reinelt]reinelt2-17/+99 updated LCD-Linux driver to version 0.8.8 git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@529 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-04-05[lcd4linux @ 2005-04-05 06:57:39 by reinelt]reinelt3-34/+34 AC_CHECK_HEADERS corrected git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@528 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-04-05[lcd4linux @ 2005-04-05 05:12:48 by reinelt]reinelt4-407/+33 i2c patch from Paul (still does not work here :-( git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@527 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-04-05[lcd4linux @ 2005-04-05 04:46:06 by reinelt]reinelt1-1/+20 ceil/floor patch from Maxime git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@526 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-04-04[lcd4linux @ 2005-04-04 20:11:14 by nicowallmeier]nicowallmeier1-2/+6 to be compatible with gcc 2.95 git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@525 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-04-03[lcd4linux @ 2005-04-03 07:07:43 by reinelt]reinelt8-9/+152 added statfs plugin git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@524 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-04-02[lcd4linux @ 2005-04-02 05:28:58 by reinelt]reinelt3-19/+27 fixed gcc4 warnings about signed/unsigned mismatches git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@523 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-04-01[lcd4linux @ 2005-04-01 05:16:04 by reinelt]reinelt5-584/+694 moved plugin init stuff to a seperate function called on first use git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@522 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-03-30[lcd4linux @ 2005-03-30 04:57:50 by reinelt]reinelt3-23/+67 Evaluator speedup: use bsearch for finding functions and variables git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@521 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-03-28[lcd4linux @ 2005-03-28 22:29:23 by reinelt]reinelt1-250/+346 HD44780 multiple displays patch from geronet git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@520 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-03-28[lcd4linux @ 2005-03-28 19:39:14 by reinelt]reinelt9-256/+1147 HD44780/I2C patch from Luis merged (still does not work for me) git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@519 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-03-25[lcd4linux @ 2005-03-25 15:44:43 by reinelt]reinelt1-2/+5 HD44780 Backlight fixed (thanks to geronet) git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@518 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-03-23[lcd4linux @ 2005-03-23 12:23:35 by reinelt]reinelt1-27/+32 fixed some signed/unsigned char mismatches in the Crystalfontz driver (ticket #12) git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@517 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-02-24[lcd4linux @ 2005-02-24 07:07:55 by reinelt]reinelt1-0/+53 ChangeLog git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@516 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-02-24[lcd4linux @ 2005-02-24 07:06:45 by reinelt]reinelt11-28/+347 SimpleLCD driver added git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@515 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-02-24[lcd4linux @ 2005-02-24 06:51:40 by reinelt]reinelt1-4/+5 LCD-Linux driver GOTO_COST corrected git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@514 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-01-30[lcd4linux @ 2005-01-30 06:43:22 by reinelt]reinelt4-69/+95 driver for LCD-Linux finished git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@513 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-01-29[lcd4linux @ 2005-01-29 09:30:56 by reinelt]reinelt1-8/+11 minor HD44780 cleanups git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@512 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-01-22[lcd4linux @ 2005-01-22 22:57:57 by reinelt]reinelt9-47/+382 LCD-Linux driver added git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@511 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-01-22[lcd4linux @ 2005-01-22 12:44:41 by reinelt]reinelt1-3/+6 MatrixOrbital backlight micro-fix git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@510 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-01-18[lcd4linux @ 2005-01-18 06:30:21 by reinelt]reinelt89-261/+603 added (C) to all copyright statements git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@509 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-01-17[lcd4linux @ 2005-01-17 06:38:48 by reinelt]reinelt1-1/+6 info about backlight and brightness git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@508 3ae390bd-cb1e-0410-b409-cd5a39f66f1f 2005-01-17[lcd4linux @ 2005-01-17 06:29:24 by reinelt]reinelt3-33/+85 added software-controlled backlight support to HD44780 git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@507 3ae390bd-cb1e-0410-b409-cd5a39f66f1f