diff options
Diffstat (limited to '')
| -rw-r--r-- | aux-build/texinfo.tex | 2370 |
1 files changed, 1579 insertions, 791 deletions
diff --git a/aux-build/texinfo.tex b/aux-build/texinfo.tex index 9140826..85f184c 100644 --- a/aux-build/texinfo.tex +++ b/aux-build/texinfo.tex @@ -3,11 +3,11 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2009-08-14.15} +\def\texinfoversion{2013-02-01.11} % % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, -% 2007, 2008, 2009 Free Software Foundation, Inc. +% 2007, 2008, 2009, 2010, 2011, 2012, 2013 Free Software Foundation, Inc. % % This texinfo.tex file is free software: you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -24,13 +24,14 @@ % % As a special exception, when this file is read by TeX when processing % a Texinfo source document, you may use the result without -% restriction. (This has been our intent since Texinfo was invented.) +% restriction. This Exception is an additional permission under section 7 +% of the GNU General Public License, version 3 ("GPLv3"). % % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: -% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or -% ftp://tug.org/tex/texinfo.tex -% (and all CTAN mirrors, see http://www.ctan.org). +% http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or +% http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or +% http://www.gnu.org/software/texinfo/ (the Texinfo home page) % The texinfo.tex in any given distribution could well be out % of date, so if that's what you're using, please check. % @@ -65,7 +66,6 @@ \everyjob{\message{[Texinfo version \texinfoversion]}% \catcode`+=\active \catcode`\_=\active} - \chardef\other=12 % We never want plain's \outer definition of \+ in Texinfo. @@ -93,14 +93,13 @@ \let\ptexnewwrite\newwrite \let\ptexnoindent=\noindent \let\ptexplus=+ +\let\ptexraggedright=\raggedright \let\ptexrbrace=\} \let\ptexslash=\/ \let\ptexstar=\* \let\ptext=\t \let\ptextop=\top -{\catcode`\'=\active -\global\let\ptexquoteright'}% Math-mode def from plain.tex. -\let\ptexraggedright=\raggedright +{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode % If this character appears in an error message or help string, it % starts a new line in the output. @@ -118,10 +117,11 @@ % Set up fixed words for English if not already set. \ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi +\ifx\putworderror\undefined \gdef\putworderror{error}\fi \ifx\putwordfile\undefined \gdef\putwordfile{file}\fi \ifx\putwordin\undefined \gdef\putwordin{in}\fi -\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi -\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi +\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi +\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi \ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi \ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi \ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi @@ -160,15 +160,18 @@ \def\spaceisspace{\catcode`\ =\spacecat} % sometimes characters are active, so we need control sequences. +\chardef\ampChar = `\& \chardef\colonChar = `\: \chardef\commaChar = `\, \chardef\dashChar = `\- \chardef\dotChar = `\. \chardef\exclamChar= `\! +\chardef\hashChar = `\# \chardef\lquoteChar= `\` \chardef\questChar = `\? \chardef\rquoteChar= `\' \chardef\semiChar = `\; +\chardef\slashChar = `\/ \chardef\underChar = `\_ % Ignore a token. @@ -199,36 +202,7 @@ % that mark overfull boxes (in case you have decided % that the text looks ok even though it passes the margin). % -\def\finalout{\overfullrule=0pt} - -% @| inserts a changebar to the left of the current line. It should -% surround any changed text. This approach does *not* work if the -% change spans more than two lines of output. To handle that, we would -% have adopt a much more difficult approach (putting marks into the main -% vertical list for the beginning and end of each change). -% -\def\|{% - % \vadjust can only be used in horizontal mode. - \leavevmode - % - % Append this vertical mode material after the current line in the output. - \vadjust{% - % We want to insert a rule with the height and depth of the current - % leading; that is exactly what \strutbox is supposed to record. - \vskip-\baselineskip - % - % \vadjust-items are inserted at the left edge of the type. So - % the \llap here moves out into the left-hand margin. - \llap{% - % - % For a thicker or thinner bar, change the `1pt'. - \vrule height\baselineskip width1pt - % - % This is the space between the bar and the text. - \hskip 12pt - }% - }% -} +\def\finalout{\overfullrule=0pt } % Sometimes it is convenient to have everything in the transcript file % and nothing on the terminal. We don't just call \tracingall here, @@ -246,7 +220,7 @@ \tracingmacros2 \tracingrestores1 \showboxbreadth\maxdimen \showboxdepth\maxdimen - \ifx\eTeXversion\undefined\else % etex gives us more logging + \ifx\eTeXversion\thisisundefined\else % etex gives us more logging \tracingscantokens1 \tracingifs1 \tracinggroups1 @@ -257,6 +231,13 @@ \errorcontextlines16 }% +% @errormsg{MSG}. Do the index-like expansions on MSG, but if things +% aren't perfect, it's not the end of the world, being an error message, +% after all. +% +\def\errormsg{\begingroup \indexnofonts \doerrormsg} +\def\doerrormsg#1{\errmessage{#1}} + % add check for \lastpenalty to plain's definitions. If the last thing % we did was a \nobreak, we don't want to insert more space. % @@ -267,7 +248,6 @@ \def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount \removelastskip\penalty-200\bigskip\fi\fi} -% For @cropmarks command. % Do @cropmarks to get crop marks. % \newif\ifcropmarks @@ -577,7 +557,7 @@ } \def\inenvironment#1{% \ifx#1\empty - out of any environment% + outside of any environment% \else in environment \expandafter\string#1% \fi @@ -589,7 +569,7 @@ \parseargdef\end{% \if 1\csname iscond.#1\endcsname \else - % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03 + % The general wording of \badenverr may not be ideal. \expandafter\checkenv\csname#1\endcsname \csname E#1\endcsname \endgroup @@ -599,85 +579,6 @@ \newhelp\EMsimple{Press RETURN to continue.} -%% Simple single-character @ commands - -% @@ prints an @ -% Kludge this until the fonts are right (grr). -\def\@{{\tt\char64}} - -% This is turned off because it was never documented -% and you can use @w{...} around a quote to suppress ligatures. -%% Define @` and @' to be the same as ` and ' -%% but suppressing ligatures. -%\def\`{{`}} -%\def\'{{'}} - -% Used to generate quoted braces. -\def\mylbrace {{\tt\char123}} -\def\myrbrace {{\tt\char125}} -\let\{=\mylbrace -\let\}=\myrbrace -\begingroup - % Definitions to produce \{ and \} commands for indices, - % and @{ and @} for the aux/toc files. - \catcode`\{ = \other \catcode`\} = \other - \catcode`\[ = 1 \catcode`\] = 2 - \catcode`\! = 0 \catcode`\\ = \other - !gdef!lbracecmd[\{]% - !gdef!rbracecmd[\}]% - !gdef!lbraceatcmd[@{]% - !gdef!rbraceatcmd[@}]% -!endgroup - -% @comma{} to avoid , parsing problems. -\let\comma = , - -% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent -% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. -\let\, = \c -\let\dotaccent = \. -\def\ringaccent#1{{\accent23 #1}} -\let\tieaccent = \t -\let\ubaraccent = \b -\let\udotaccent = \d - -% Other special characters: @questiondown @exclamdown @ordf @ordm -% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. -\def\questiondown{?`} -\def\exclamdown{!`} -\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} -\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} - -% Dotless i and dotless j, used for accents. -\def\imacro{i} -\def\jmacro{j} -\def\dotless#1{% - \def\temp{#1}% - \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi - \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi - \else \errmessage{@dotless can be used only with i or j}% - \fi\fi -} - -% The \TeX{} logo, as in plain, but resetting the spacing so that a -% period following counts as ending a sentence. (Idea found in latex.) -% -\edef\TeX{\TeX \spacefactor=1000 } - -% @LaTeX{} logo. Not quite the same results as the definition in -% latex.ltx, since we use a different font for the raised A; it's most -% convenient for us to use an explicitly smaller font, rather than using -% the \scriptstyle font (since we don't reset \scriptstyle and -% \scriptscriptstyle). -% -\def\LaTeX{% - L\kern-.36em - {\setbox0=\hbox{T}% - \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}% - \kern-.15em - \TeX -} - % Be sure we're in horizontal mode when doing a tie, since we make space % equivalent to this in @example-like environments. Otherwise, a space % at the beginning of a line will start with \penalty -- and @@ -694,7 +595,7 @@ \def\:{\spacefactor=1000 } % @* forces a line break. -\def\*{\hfil\break\hbox{}\ignorespaces} +\def\*{\unskip\hfil\break\hbox{}\ignorespaces} % @/ allows a line break. \let\/=\allowbreak @@ -719,7 +620,7 @@ \else\ifx\temp\offword \plainnonfrenchspacing \else \errhelp = \EMsimple - \errmessage{Unknown @frenchspacing option `\temp', must be on/off}% + \errmessage{Unknown @frenchspacing option `\temp', must be on|off}% \fi\fi } @@ -801,15 +702,6 @@ where each line of input produces a line of output.} \newdimen\mil \mil=0.001in -% Old definition--didn't work. -%\parseargdef\need{\par % -%% This method tries to make TeX break the page naturally -%% if the depth of the box does not fit. -%{\baselineskip=0pt% -%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak -%\prevdepth=-1000pt -%}} - \parseargdef\need{% % Ensure vertical mode, so we don't make a big box in the middle of a % paragraph. @@ -873,7 +765,7 @@ where each line of input produces a line of output.} % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current % paragraph. For more general purposes, use the \margin insertion -% class. WHICH is `l' or `r'. +% class. WHICH is `l' or `r'. Not documented, written for gawk manual. % \newskip\inmarginspacing \inmarginspacing=1cm \def\strutdepth{\dp\strutbox} @@ -920,6 +812,36 @@ where each line of input produces a line of output.} \temp } +% @| inserts a changebar to the left of the current line. It should +% surround any changed text. This approach does *not* work if the +% change spans more than two lines of output. To handle that, we would +% have adopt a much more difficult approach (putting marks into the main +% vertical list for the beginning and end of each change). This command +% is not documented, not supported, and doesn't work. +% +\def\|{% + % \vadjust can only be used in horizontal mode. + \leavevmode + % + % Append this vertical mode material after the current line in the output. + \vadjust{% + % We want to insert a rule with the height and depth of the current + % leading; that is exactly what \strutbox is supposed to record. + \vskip-\baselineskip + % + % \vadjust-items are inserted at the left edge of the type. So + % the \llap here moves out into the left-hand margin. + \llap{% + % + % For a thicker or thinner bar, change the `1pt'. + \vrule height\baselineskip width1pt + % + % This is the space between the bar and the text. + \hskip 12pt + }% + }% +} + % @include FILE -- \input text of FILE. % \def\include{\parseargusing\filenamecatcodes\includezzz} @@ -930,6 +852,7 @@ where each line of input produces a line of output.} \makevalueexpandable % we want to expand any @value in FILE. \turnoffactive % and allow special characters in the expansion \indexnofonts % Allow `@@' and other weird things in file names. + \wlog{texinfo.tex: doing @include of #1^^J}% \edef\temp{\noexpand\input #1 }% % % This trickery is to read FILE outside of a group, in case it makes @@ -965,7 +888,7 @@ where each line of input produces a line of output.} \def\popthisfilestack{\errthisfilestackempty} \def\errthisfilestackempty{\errmessage{Internal error: the stack of filenames is empty.}} - +% \def\thisfile{} % @center line @@ -973,36 +896,46 @@ where each line of input produces a line of output.} % \parseargdef\center{% \ifhmode - \let\next\centerH + \let\centersub\centerH \else - \let\next\centerV + \let\centersub\centerV \fi - \next{\hfil \ignorespaces#1\unskip \hfil}% + \centersub{\hfil \ignorespaces#1\unskip \hfil}% + \let\centersub\relax % don't let the definition persist, just in case } -\def\centerH#1{% - {% - \hfil\break - \advance\hsize by -\leftskip - \advance\hsize by -\rightskip - \line{#1}% - \break - }% +\def\centerH#1{{% + \hfil\break + \advance\hsize by -\leftskip + \advance\hsize by -\rightskip + \line{#1}% + \break +}} +% +\newcount\centerpenalty +\def\centerV#1{% + % The idea here is the same as in \startdefun, \cartouche, etc.: if + % @center is the first thing after a section heading, we need to wipe + % out the negative parskip inserted by \sectionheading, but still + % prevent a page break here. + \centerpenalty = \lastpenalty + \ifnum\centerpenalty>10000 \vskip\parskip \fi + \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi + \line{\kern\leftskip #1\kern\rightskip}% } -\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}} % @sp n outputs n lines of vertical space - +% \parseargdef\sp{\vskip #1\baselineskip} % @comment ...line which is ignored... % @c is the same as @comment % @ignore ... @end ignore is another way to write a comment - +% \def\comment{\begingroup \catcode`\^^M=\other% \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% \commentxxx} {\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}} - +% \let\c=\comment % @paragraphindent NCHARS @@ -1095,109 +1028,6 @@ where each line of input produces a line of output.} } -% @asis just yields its argument. Used with @table, for example. -% -\def\asis#1{#1} - -% @math outputs its argument in math mode. -% -% One complication: _ usually means subscripts, but it could also mean -% an actual _ character, as in @math{@var{some_variable} + 1}. So make -% _ active, and distinguish by seeing if the current family is \slfam, -% which is what @var uses. -{ - \catcode`\_ = \active - \gdef\mathunderscore{% - \catcode`\_=\active - \def_{\ifnum\fam=\slfam \_\else\sb\fi}% - } -} -% Another complication: we want \\ (and @\) to output a \ character. -% FYI, plain.tex uses \\ as a temporary control sequence (why?), but -% this is not advertised and we don't care. Texinfo does not -% otherwise define @\. -% -% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. -\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} -% -\def\math{% - \tex - \mathunderscore - \let\\ = \mathbackslash - \mathactive - % make the texinfo accent commands work in math mode - \let\"=\ddot - \let\'=\acute - \let\==\bar - \let\^=\hat - \let\`=\grave - \let\u=\breve - \let\v=\check - \let\~=\tilde - \let\dotaccent=\dot - $\finishmath -} -\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. - -% Some active characters (such as <) are spaced differently in math. -% We have to reset their definitions in case the @math was an argument -% to a command which sets the catcodes (such as @item or @section). -% -{ - \catcode`^ = \active - \catcode`< = \active - \catcode`> = \active - \catcode`+ = \active - \catcode`' = \active - \gdef\mathactive{% - \let^ = \ptexhat - \let< = \ptexless - \let> = \ptexgtr - \let+ = \ptexplus - \let' = \ptexquoteright - } -} - -% Some math mode symbols. -\def\bullet{$\ptexbullet$} -\def\geq{\ifmmode \ge\else $\ge$\fi} -\def\leq{\ifmmode \le\else $\le$\fi} -\def\minus{\ifmmode -\else $-$\fi} - -% @dots{} outputs an ellipsis using the current font. -% We do .5em per period so that it has the same spacing in the cm -% typewriter fonts as three actual period characters; on the other hand, -% in other typewriter fonts three periods are wider than 1.5em. So do -% whichever is larger. -% -\def\dots{% - \leavevmode - \setbox0=\hbox{...}% get width of three periods - \ifdim\wd0 > 1.5em - \dimen0 = \wd0 - \else - \dimen0 = 1.5em - \fi - \hbox to \dimen0{% - \hskip 0pt plus.25fil - .\hskip 0pt plus1fil - .\hskip 0pt plus1fil - .\hskip 0pt plus.5fil - }% -} - -% @enddots{} is an end-of-sentence ellipsis. -% -\def\enddots{% - \dots - \spacefactor=\endofsentencespacefactor -} - -% @comma{} is so commas can be inserted into text without messing up -% Texinfo's parsing. -% -\let\comma = , - % @refill is a no-op. \let\refill=\relax @@ -1262,9 +1092,8 @@ where each line of input produces a line of output.} \newif\ifpdfmakepagedest % when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 -% can be set). So we test for \relax and 0 as well as \undefined, -% borrowed from ifpdf.sty. -\ifx\pdfoutput\undefined +% can be set). So we test for \relax and 0 as well as being undefined. +\ifx\pdfoutput\thisisundefined \else \ifx\pdfoutput\relax \else @@ -1279,50 +1108,24 @@ where each line of input produces a line of output.} % for display in the outlines, and in other places. Thus, we have to % double any backslashes. Otherwise, a name like "\node" will be % interpreted as a newline (\n), followed by o, d, e. Not good. -% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html -% (and related messages, the final outcome is that it is up to the TeX -% user to double the backslashes and otherwise make the string valid, so -% that's what we do). - -% double active backslashes. -% -{\catcode`\@=0 \catcode`\\=\active - @gdef@activebackslashdouble{% - @catcode`@\=@active - @let\=@doublebackslash} -} - -% To handle parens, we must adopt a different approach, since parens are -% not active characters. hyperref.dtx (which has the same problem as -% us) handles it with this amazing macro to replace tokens, with minor -% changes for Texinfo. It is included here under the GPL by permission -% from the author, Heiko Oberdiek. -% -% #1 is the tokens to replace. -% #2 is the replacement. -% #3 is the control sequence with the string. -% -\def\HyPsdSubst#1#2#3{% - \def\HyPsdReplace##1#1##2\END{% - ##1% - \ifx\\##2\\% - \else - #2% - \HyReturnAfterFi{% - \HyPsdReplace##2\END - }% - \fi - }% - \xdef#3{\expandafter\HyPsdReplace#3#1\END}% -} -\long\def\HyReturnAfterFi#1\fi{\fi#1} - -% #1 is a control sequence in which to do the replacements. -\def\backslashparens#1{% - \xdef#1{#1}% redefine it as its expansion; the definition is simply - % \lastnode when called from \setref -> \pdfmkdest. - \HyPsdSubst{(}{\realbackslash(}{#1}% - \HyPsdSubst{)}{\realbackslash)}{#1}% +% +% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and +% related messages. The final outcome is that it is up to the TeX user +% to double the backslashes and otherwise make the string valid, so +% that's what we do. pdftex 1.30.0 (ca.2005) introduced a primitive to +% do this reliably, so we use it. + +% #1 is a control sequence in which to do the replacements, +% which we \xdef. +\def\txiescapepdf#1{% + \ifx\pdfescapestring\thisisundefined + % No primitive available; should we give a warning or log? + % Many times it won't matter. + \else + % The expandable \pdfescapestring primitive escapes parentheses, + % backslashes, and other special chars. + \xdef#1{\pdfescapestring{#1}}% + \fi } \newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images @@ -1381,32 +1184,34 @@ output) for that.)} % % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto). \def\dopdfimage#1#2#3{% - \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% - \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% + \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% + \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% % - % pdftex (and the PDF format) support .png, .jpg, .pdf (among - % others). Let's try in that order. + % pdftex (and the PDF format) support .pdf, .png, .jpg (among + % others). Let's try in that order, PDF first since if + % someone has a scalable image, presumably better to use that than a + % bitmap. \let\pdfimgext=\empty \begingroup - \openin 1 #1.png \ifeof 1 - \openin 1 #1.jpg \ifeof 1 - \openin 1 #1.jpeg \ifeof 1 - \openin 1 #1.JPG \ifeof 1 - \openin 1 #1.pdf \ifeof 1 - \openin 1 #1.PDF \ifeof 1 + \openin 1 #1.pdf \ifeof 1 + \openin 1 #1.PDF \ifeof 1 + \openin 1 #1.png \ifeof 1 + \openin 1 #1.jpg \ifeof 1 + \openin 1 #1.jpeg \ifeof 1 + \openin 1 #1.JPG \ifeof 1 \errhelp = \nopdfimagehelp \errmessage{Could not find image file #1 for pdf}% - \else \gdef\pdfimgext{PDF}% + \else \gdef\pdfimgext{JPG}% \fi - \else \gdef\pdfimgext{pdf}% + \else \gdef\pdfimgext{jpeg}% \fi - \else \gdef\pdfimgext{JPG}% + \else \gdef\pdfimgext{jpg}% \fi - \else \gdef\pdfimgext{jpeg}% + \else \gdef\pdfimgext{png}% \fi - \else \gdef\pdfimgext{jpg}% + \else \gdef\pdfimgext{PDF}% \fi - \else \gdef\pdfimgext{png}% + \else \gdef\pdfimgext{pdf}% \fi \closein 1 \endgroup @@ -1418,8 +1223,8 @@ output) for that.)} \else \immediate\pdfximage \fi - \ifdim \wd0 >0pt width \imagewidth \fi - \ifdim \wd2 >0pt height \imageheight \fi + \ifdim \wd0 >0pt width \pdfimagewidth \fi + \ifdim \wd2 >0pt height \pdfimageheight \fi \ifnum\pdftexversion<13 #1.\pdfimgext \else @@ -1434,10 +1239,9 @@ output) for that.)} % such as \, aren't expanded when present in a section title. \indexnofonts \turnoffactive - \activebackslashdouble \makevalueexpandable \def\pdfdestname{#1}% - \backslashparens\pdfdestname + \txiescapepdf\pdfdestname \safewhatsit{\pdfdest name{\pdfdestname} xyz}% }} % @@ -1469,29 +1273,24 @@ output) for that.)} % page number. We could generate a destination for the section % text in the case where a section has no node, but it doesn't % seem worth the trouble, since most documents are normally structured. - \def\pdfoutlinedest{#3}% + \edef\pdfoutlinedest{#3}% \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}% \else - % Doubled backslashes in the name. - {\activebackslashdouble \xdef\pdfoutlinedest{#3}% - \backslashparens\pdfoutlinedest}% + \txiescapepdf\pdfoutlinedest \fi % - % Also double the backslashes in the display string. - {\activebackslashdouble \xdef\pdfoutlinetext{#1}% - \backslashparens\pdfoutlinetext}% + % Also escape PDF chars in the display string. + \edef\pdfoutlinetext{#1}% + \txiescapepdf\pdfoutlinetext % \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}% } % \def\pdfmakeoutlines{% \begingroup - % Thanh's hack / proper braces in bookmarks - \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace - \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace - % % Read toc silently, to get counts of subentries for \pdfoutline. + \def\partentry##1##2##3##4{}% ignore parts in the outlines \def\numchapentry##1##2##3##4{% \def\thischapnum{##2}% \def\thissecnum{0}% @@ -1545,25 +1344,41 @@ output) for that.)} % Latin 2 (0xea) gets translated to a | character. Info from % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. % - % xx to do this right, we have to translate 8-bit characters to - % their "best" equivalent, based on the @documentencoding. Right - % now, I guess we'll just let the pdf reader have its way. + % TODO this right, we have to translate 8-bit characters to + % their "best" equivalent, based on the @documentencoding. Too + % much work for too little return. Just use the ASCII equivalents + % we use for the index sort strings. + % \indexnofonts \setupdatafile + % We can have normal brace characters in the PDF outlines, unlike + % Texinfo index files. So set that up. + \def\{{\lbracecharliteral}% + \def\}{\rbracecharliteral}% \catcode`\\=\active \otherbackslash \input \tocreadfilename \endgroup } + {\catcode`[=1 \catcode`]=2 + \catcode`{=\other \catcode`}=\other + \gdef\lbracecharliteral[{]% + \gdef\rbracecharliteral[}]% + ] % \def\skipspaces#1{\def\PP{#1}\def\D{|}% \ifx\PP\D\let\nextsp\relax \else\let\nextsp\skipspaces - \ifx\p\space\else\addtokens{\filename}{\PP}% - \advance\filenamelength by 1 - \fi + \addtokens{\filename}{\PP}% + \advance\filenamelength by 1 \fi \nextsp} - \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax} + \def\getfilename#1{% + \filenamelength=0 + % If we don't expand the argument now, \skipspaces will get + % snagged on things like "@value{foo}". + \edef\temp{#1}% + \expandafter\skipspaces\temp|\relax + } \ifnum\pdftexversion < 14 \let \startlink \pdfannotlink \else @@ -1660,9 +1475,6 @@ output) for that.)} \def\ttsl{\setfontstyle{ttsl}} -% Default leading. -\newdimen\textleading \textleading = 13.2pt - % Set the baselineskip to #1, and the lineskip and strut size % correspondingly. There is no deep meaning behind these magic numbers % used as factors; they just match (closely enough) what Knuth defined. @@ -1674,6 +1486,7 @@ output) for that.)} % can get a sort of poor man's double spacing by redefining this. \def\baselinefactor{1} % +\newdimen\textleading \def\setleading#1{% \dimen0 = #1\relax \normalbaselineskip = \baselinefactor\dimen0 @@ -1695,7 +1508,7 @@ output) for that.)} % if we are producing pdf, and we have \pdffontattr, then define cmaps. % (\pdffontattr was introduced many years ago, but people still run % older pdftex's; it's easy to conditionalize, so we do.) -\ifpdf \ifx\pdffontattr\undefined \else +\ifpdf \ifx\pdffontattr\thisisundefined \else \begingroup \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap @@ -1946,28 +1759,34 @@ end \fi\fi -% Set the font macro #1 to the font named #2, adding on the -% specified font prefix (normally `cm'). +% Set the font macro #1 to the font named \fontprefix#2. % #3 is the font's design size, #4 is a scale factor, #5 is the CMap -% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass -% empty to omit). +% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit). +% Example: +% #1 = \textrm +% #2 = \rmshape +% #3 = 10 +% #4 = \mainmagstep +% #5 = OT1 +% \def\setfont#1#2#3#4#5{% \font#1=\fontprefix#2#3 scaled #4 \csname cmap#5\endcsname#1% } % This is what gets called when #5 of \setfont is empty. \let\cmap\gobble -% emacs-page end of cmaps +% +% (end of cmaps) % Use cm as the default font prefix. % To specify the font prefix, you must define \fontprefix % before you read in texinfo.tex. -\ifx\fontprefix\undefined +\ifx\fontprefix\thisisundefined \def\fontprefix{cm} \fi % Support font families that don't use the same naming scheme as CM. \def\rmshape{r} -\def\rmbshape{bx} %where the normal face is bold +\def\rmbshape{bx} % where the normal face is bold \def\bfshape{b} \def\bxshape{bx} \def\ttshape{tt} @@ -1982,8 +1801,7 @@ end \def\scshape{csc} \def\scbshape{csc} -% Definitions for a main text size of 11pt. This is the default in -% Texinfo. +% Definitions for a main text size of 11pt. (The default in Texinfo.) % \def\definetextfontsizexi{% % Text fonts (11.2pt, magstep1). @@ -2105,10 +1923,10 @@ end \font\reducedsy=cmsy10 \def\reducedecsize{1000} -% reset the current fonts -\textfonts +\textleading = 13.2pt % line spacing for 11pt CM +\textfonts % reset the current fonts \rm -} % end of 11pt text font size definitions +} % end of 11pt text font size definitions, \definetextfontsizexi % Definitions to make the main text be 10pt Computer Modern, with @@ -2236,25 +2054,24 @@ end \font\reducedsy=cmsy9 \def\reducedecsize{0900} -% reduce space between paragraphs -\divide\parskip by 2 - -% reset the current fonts -\textfonts +\divide\parskip by 2 % reduce space between paragraphs +\textleading = 12pt % line spacing for 10pt CM +\textfonts % reset the current fonts \rm -} % end of 10pt text font size definitions +} % end of 10pt text font size definitions, \definetextfontsizex % We provide the user-level command % @fonttextsize 10 % (or 11) to redefine the text font size. pt is assumed. % -\def\xword{10} \def\xiword{11} +\def\xword{10} +\def\xwordpt{10pt} % \parseargdef\fonttextsize{% \def\textsizearg{#1}% - \wlog{doing @fonttextsize \textsizearg}% + %\wlog{doing @fonttextsize \textsizearg}% % % Set \globaldefs so that documents can use this inside @tex, since % makeinfo 4.8 does not support it, but we need it nonetheless. @@ -2308,7 +2125,7 @@ end \let\tenttsl=\titlettsl \def\curfontsize{title}% \def\lsize{chap}\def\lllsize{subsec}% - \resetmathfonts \setleading{25pt}} + \resetmathfonts \setleading{27pt}} \def\titlefont#1{{\titlefonts\rmisbold #1}} \def\chapfonts{% \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl @@ -2436,12 +2253,14 @@ end % Markup style setup for left and right quotes. \defmarkupstylesetup\markupsetuplq{% - \expandafter\let\expandafter \temp \csname markupsetuplq\currentmarkupstyle\endcsname + \expandafter\let\expandafter \temp + \csname markupsetuplq\currentmarkupstyle\endcsname \ifx\temp\relax \markupsetuplqdefault \else \temp \fi } \defmarkupstylesetup\markupsetuprq{% - \expandafter\let\expandafter \temp \csname markupsetuprq\currentmarkupstyle\endcsname + \expandafter\let\expandafter \temp + \csname markupsetuprq\currentmarkupstyle\endcsname \ifx\temp\relax \markupsetuprqdefault \else \temp \fi } @@ -2454,28 +2273,31 @@ end \gdef\markupsetcodequoteleft{\let`\codequoteleft} \gdef\markupsetcodequoteright{\let'\codequoteright} - -\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft} } \let\markupsetuplqcode \markupsetcodequoteleft \let\markupsetuprqcode \markupsetcodequoteright +% \let\markupsetuplqexample \markupsetcodequoteleft \let\markupsetuprqexample \markupsetcodequoteright +% +\let\markupsetuplqkbd \markupsetcodequoteleft +\let\markupsetuprqkbd \markupsetcodequoteright +% +\let\markupsetuplqsamp \markupsetcodequoteleft +\let\markupsetuprqsamp \markupsetcodequoteright +% \let\markupsetuplqverb \markupsetcodequoteleft \let\markupsetuprqverb \markupsetcodequoteright +% \let\markupsetuplqverbatim \markupsetcodequoteleft \let\markupsetuprqverbatim \markupsetcodequoteright -\let\markupsetuplqsamp \markupsetnoligaturesquoteleft -\let\markupsetuplqkbd \markupsetnoligaturesquoteleft - -% Allow an option to not replace quotes with a regular directed right -% quote/apostrophe (char 0x27), but instead use the undirected quote -% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it -% the default, but it works for pasting with more pdf viewers (at least -% evince), the lilypond developers report. xpdf does work with the -% regular 0x27. +% Allow an option to not use regular directed right quote/apostrophe +% (char 0x27), but instead the undirected quote from cmtt (char 0x0d). +% The undirected quote is ugly, so don't make it the default, but it +% works for pasting with more pdf viewers (at least evince), the +% lilypond developers report. xpdf does work with the regular 0x27. % \def\codequoteright{% \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax @@ -2499,33 +2321,83 @@ end \else \char'22 \fi } +% Commands to set the quote options. +% +\parseargdef\codequoteundirected{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxicodequoteundirected\endcsname + = t% + \else\ifx\temp\offword + \expandafter\let\csname SETtxicodequoteundirected\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}% + \fi\fi +} +% +\parseargdef\codequotebacktick{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxicodequotebacktick\endcsname + = t% + \else\ifx\temp\offword + \expandafter\let\csname SETtxicodequotebacktick\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}% + \fi\fi +} + % [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font. \def\noligaturesquoteleft{\relax\lq} % Count depth in font-changes, for error checks \newcount\fontdepth \fontdepth=0 -%% Add scribe-like font environments, plus @l for inline lisp (usually sans -%% serif) and @ii for TeX italic +% Font commands. -% \smartitalic{ARG} outputs arg in italics, followed by an italic correction -% unless the following character is such as not to need one. -\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else - \ptexslash\fi\fi\fi} -\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx} -\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx} +% #1 is the font command (\sl or \it), #2 is the text to slant. +% If we are in a monospaced environment, however, 1) always use \ttsl, +% and 2) do not add an italic correction. +\def\dosmartslant#1#2{% + \ifusingtt + {{\ttsl #2}\let\next=\relax}% + {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}% + \next +} +\def\smartslanted{\dosmartslant\sl} +\def\smartitalic{\dosmartslant\it} -% like \smartslanted except unconditionally uses \ttsl. -% @var is set to this for defun arguments. -\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx} +% Output an italic correction unless \next (presumed to be the following +% character) is such as not to need one. +\def\smartitaliccorrection{% + \ifx\next,% + \else\ifx\next-% + \else\ifx\next.% + \else\ptexslash + \fi\fi\fi + \aftersmartic +} + +% Unconditional use \ttsl, and no ic. @var is set to this for defuns. +\def\ttslanted#1{{\ttsl #1}} % @cite is like \smartslanted except unconditionally use \sl. We never want % ttsl for book titles, do we? -\def\cite#1{{\sl #1}\futurelet\next\smartitalicx} +\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection} + +\def\aftersmartic{} +\def\var#1{% + \let\saveaftersmartic = \aftersmartic + \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}% + \smartslanted{#1}% +} \let\i=\smartitalic \let\slanted=\smartslanted -\def\var#1{{\setupmarkupstyle{var}\smartslanted{#1}}} \let\dfn=\smartslanted \let\emph=\smartitalic @@ -2575,34 +2447,12 @@ end % @samp. \def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}} -% definition of @key that produces a lozenge. Doesn't adjust to text size. -%\setfont\keyrm\rmshape{8}{1000}{OT1} -%\font\keysy=cmsy9 -%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% -% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% -% \vbox{\hrule\kern-0.4pt -% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% -% \kern-0.4pt\hrule}% -% \kern-.06em\raise0.4pt\hbox{\angleright}}}} +% @indicateurl is \samp, that is, with quotes. +\let\indicateurl=\samp -% definition of @key with no lozenge. If the current font is already -% monospace, don't change it; that way, we respect @kbdinputstyle. But -% if it isn't monospace, then use \tt. -% -\def\key#1{{\setupmarkupstyle{key}% - \nohyphenation - \ifmonospace\else\tt\fi - #1}\null} - -% ctrl is no longer a Texinfo command. -\def\ctrl #1{{\tt \rawbackslash \hat}#1} - -% @file, @option are the same as @samp. -\let\file=\samp -\let\option=\samp - -% @code is a modification of @t, -% which makes spaces the same size as normal in the surrounding text. +% @code (and similar) prints in typewriter, but with spaces the same +% size as normal in the surrounding text, without hyphenation, etc. +% This is a subroutine for that. \def\tclose#1{% {% % Change normal interword space to be same as for the current font. @@ -2621,13 +2471,13 @@ end \plainfrenchspacing #1% }% - \null + \null % reset spacefactor to 1000 } % We *must* turn on hyphenation at `-' and `_' in @code. % Otherwise, it is too hard to avoid overfull hboxes % in the Emacs manual, the Library manual, etc. - +% % Unfortunately, TeX uses one parameter (\hyphenchar) to control % both hyphenation at - and hyphenation within words. % We must therefore turn them both off (\tclose does that) @@ -2646,14 +2496,16 @@ end \let-\codedash \let_\codeunder \else - \let-\realdash + \let-\normaldash \let_\realunder \fi \codex } } -\def\realdash{-} +\def\codex #1{\tclose{#1}\endgroup} + +\def\normaldash{-} \def\codedash{-\discretionary{}{}{}} \def\codeunder{% % this is all so @math{@code{var_name}+1} can work. In math mode, _ @@ -2666,12 +2518,11 @@ end \discretionary{}{}{}}% {\_}% } -\def\codex #1{\tclose{#1}\endgroup} % An additional complication: the above will allow breaks after, e.g., -% each of the four underscores in __typeof__. This is undesirable in -% some manuals, especially if they don't have long identifiers in -% general. @allowcodebreaks provides a way to control this. +% each of the four underscores in __typeof__. This is bad. +% @allowcodebreaks provides a document-level way to turn breaking at - +% and _ on and off. % \newif\ifallowcodebreaks \allowcodebreakstrue @@ -2686,63 +2537,25 @@ end \allowcodebreaksfalse \else \errhelp = \EMsimple - \errmessage{Unknown @allowcodebreaks option `\txiarg'}% + \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}% \fi\fi } -% @kbd is like @code, except that if the argument is just one @key command, -% then @kbd has no effect. -\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}} - -% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), -% `example' (@kbd uses ttsl only inside of @example and friends), -% or `code' (@kbd uses normal tty font always). -\parseargdef\kbdinputstyle{% - \def\txiarg{#1}% - \ifx\txiarg\worddistinct - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% - \else\ifx\txiarg\wordexample - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% - \else\ifx\txiarg\wordcode - \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% - \else - \errhelp = \EMsimple - \errmessage{Unknown @kbdinputstyle option `\txiarg'}% - \fi\fi\fi -} -\def\worddistinct{distinct} -\def\wordexample{example} -\def\wordcode{code} - -% Default is `distinct'. -\kbdinputstyle distinct - -\def\xkey{\key} -\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% -\ifx\one\xkey\ifx\threex\three \key{#2}% -\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi -\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi} - -% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. -\let\indicateurl=\code -\let\env=\code +% For @command, @env, @file, @option quotes seem unnecessary, +% so use \code rather than \samp. \let\command=\code - -% @clicksequence{File @click{} Open ...} -\def\clicksequence#1{\begingroup #1\endgroup} - -% @clickstyle @arrow (by default) -\parseargdef\clickstyle{\def\click{#1}} -\def\click{\arrow} +\let\env=\code +\let\file=\code +\let\option=\code % @uref (abbreviation for `urlref') takes an optional (comma-separated) % second argument specifying the text to display and an optional third % arg as text to display instead of (rather than in addition to) the url -% itself. First (mandatory) arg is the url. Perhaps eventually put in -% a hypertex \special here. -% -\def\uref#1{\douref #1,,,\finish} -\def\douref#1,#2,#3,#4\finish{\begingroup +% itself. First (mandatory) arg is the url. +% (This \urefnobreak definition isn't used now, leaving it for a while +% for comparison.) +\def\urefnobreak#1{\dourefnobreak #1,,,\finish} +\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup \unsepspaces \pdfurl{#1}% \setbox0 = \hbox{\ignorespaces #3}% @@ -2763,6 +2576,103 @@ end \endlink \endgroup} +% This \urefbreak definition is the active one. +\def\urefbreak{\begingroup \urefcatcodes \dourefbreak} +\let\uref=\urefbreak +\def\dourefbreak#1{\urefbreakfinish #1,,,\finish} +\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example + \unsepspaces + \pdfurl{#1}% + \setbox0 = \hbox{\ignorespaces #3}% + \ifdim\wd0 > 0pt + \unhbox0 % third arg given, show only that + \else + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \ifpdf + \unhbox0 % PDF: 2nd arg given, show only it + \else + \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url + \fi + \else + \urefcode{#1}% only url given, so show it + \fi + \fi + \endlink +\endgroup} + +% Allow line breaks around only a few characters (only). +\def\urefcatcodes{% + \catcode\ampChar=\active \catcode\dotChar=\active + \catcode\hashChar=\active \catcode\questChar=\active + \catcode\slashChar=\active +} +{ + \urefcatcodes + % + \global\def\urefcode{\begingroup + \setupmarkupstyle{code}% + \urefcatcodes + \let&\urefcodeamp + \let.\urefcodedot + \let#\urefcodehash + \let?\urefcodequest + \let/\urefcodeslash + \codex + } + % + % By default, they are just regular characters. + \global\def&{\normalamp} + \global\def.{\normaldot} + \global\def#{\normalhash} + \global\def?{\normalquest} + \global\def/{\normalslash} +} + +% we put a little stretch before and after the breakable chars, to help +% line breaking of long url's. The unequal skips make look better in +% cmtt at least, especially for dots. +\def\urefprestretch{\urefprebreak \hskip0pt plus.13em } +\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em } +% +\def\urefcodeamp{\urefprestretch \&\urefpoststretch} +\def\urefcodedot{\urefprestretch .\urefpoststretch} +\def\urefcodehash{\urefprestretch \#\urefpoststretch} +\def\urefcodequest{\urefprestretch ?\urefpoststretch} +\def\urefcodeslash{\futurelet\next\urefcodeslashfinish} +{ + \catcode`\/=\active + \global\def\urefcodeslashfinish{% + \urefprestretch \slashChar + % Allow line break only after the final / in a sequence of + % slashes, to avoid line break between the slashes in http://. + \ifx\next/\else \urefpoststretch \fi + } +} + +% One more complication: by default we'll break after the special +% characters, but some people like to break before the special chars, so +% allow that. Also allow no breaking at all, for manual control. +% +\parseargdef\urefbreakstyle{% + \def\txiarg{#1}% + \ifx\txiarg\wordnone + \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak} + \else\ifx\txiarg\wordbefore + \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak} + \else\ifx\txiarg\wordafter + \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak} + \else + \errhelp = \EMsimple + \errmessage{Unknown @urefbreakstyle setting `\txiarg'}% + \fi\fi\fi +} +\def\wordafter{after} +\def\wordbefore{before} +\def\wordnone{none} + +\urefbreakstyle after + % @url synonym for @uref, since that's how everyone uses it. % \let\url=\uref @@ -2784,6 +2694,67 @@ end \let\email=\uref \fi +% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), +% `example' (@kbd uses ttsl only inside of @example and friends), +% or `code' (@kbd uses normal tty font always). +\parseargdef\kbdinputstyle{% + \def\txiarg{#1}% + \ifx\txiarg\worddistinct + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% + \else\ifx\txiarg\wordexample + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% + \else\ifx\txiarg\wordcode + \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% + \else + \errhelp = \EMsimple + \errmessage{Unknown @kbdinputstyle setting `\txiarg'}% + \fi\fi\fi +} +\def\worddistinct{distinct} +\def\wordexample{example} +\def\wordcode{code} + +% Default is `distinct'. +\kbdinputstyle distinct + +% @kbd is like @code, except that if the argument is just one @key command, +% then @kbd has no effect. +\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}} + +\def\xkey{\key} +\def\kbdsub#1#2#3\par{% + \def\one{#1}\def\three{#3}\def\threex{??}% + \ifx\one\xkey\ifx\threex\three \key{#2}% + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi +} + +% definition of @key that produces a lozenge. Doesn't adjust to text size. +%\setfont\keyrm\rmshape{8}{1000}{OT1} +%\font\keysy=cmsy9 +%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% +% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% +% \vbox{\hrule\kern-0.4pt +% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% +% \kern-0.4pt\hrule}% +% \kern-.06em\raise0.4pt\hbox{\angleright}}}} + +% definition of @key with no lozenge. If the current font is already +% monospace, don't change it; that way, we respect @kbdinputstyle. But +% if it isn't monospace, then use \tt. +% +\def\key#1{{\setupmarkupstyle{key}% + \nohyphenation + \ifmonospace\else\tt\fi + #1}\null} + +% @clicksequence{File @click{} Open ...} +\def\clicksequence#1{\begingroup #1\endgroup} + +% @clickstyle @arrow (by default) +\parseargdef\clickstyle{\def\click{#1}} +\def\click{\arrow} + % Typeset a dimension, e.g., `in' or `pt'. The only reason for the % argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. % @@ -2805,6 +2776,7 @@ end \ifx\temp\empty \else \space ({\unsepspaces \ignorespaces \temp \unskip})% \fi + \null % reset \spacefactor=1000 } % @abbr for "Comput. J." and the like. @@ -2817,10 +2789,222 @@ end \ifx\temp\empty \else \space ({\unsepspaces \ignorespaces \temp \unskip})% \fi + \null % reset \spacefactor=1000 +} + +% @asis just yields its argument. Used with @table, for example. +% +\def\asis#1{#1} + +% @math outputs its argument in math mode. +% +% One complication: _ usually means subscripts, but it could also mean +% an actual _ character, as in @math{@var{some_variable} + 1}. So make +% _ active, and distinguish by seeing if the current family is \slfam, +% which is what @var uses. +{ + \catcode`\_ = \active + \gdef\mathunderscore{% + \catcode`\_=\active + \def_{\ifnum\fam=\slfam \_\else\sb\fi}% + } +} +% Another complication: we want \\ (and @\) to output a math (or tt) \. +% FYI, plain.tex uses \\ as a temporary control sequence (for no +% particular reason), but this is not advertised and we don't care. +% +% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. +\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} +% +\def\math{% + \tex + \mathunderscore + \let\\ = \mathbackslash + \mathactive + % make the texinfo accent commands work in math mode + \let\"=\ddot + \let\'=\acute + \let\==\bar + \let\^=\hat + \let\`=\grave + \let\u=\breve + \let\v=\check + \let\~=\tilde + \let\dotaccent=\dot + $\finishmath +} +\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. + +% Some active characters (such as <) are spaced differently in math. +% We have to reset their definitions in case the @math was an argument +% to a command which sets the catcodes (such as @item or @section). +% +{ + \catcode`^ = \active + \catcode`< = \active + \catcode`> = \active + \catcode`+ = \active + \catcode`' = \active + \gdef\mathactive{% + \let^ = \ptexhat + \let< = \ptexless + \let> = \ptexgtr + \let+ = \ptexplus + \let' = \ptexquoteright + } +} + +% ctrl is no longer a Texinfo command, but leave this definition for fun. +\def\ctrl #1{{\tt \rawbackslash \hat}#1} + +% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}. +% Ignore unless FMTNAME == tex; then it is like @iftex and @tex, +% except specified as a normal braced arg, so no newlines to worry about. +% +\def\outfmtnametex{tex} +% +\long\def\inlinefmt#1{\doinlinefmt #1,\finish} +\long\def\doinlinefmt#1,#2,\finish{% + \def\inlinefmtname{#1}% + \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi +} +% For raw, must switch into @tex before parsing the argument, to avoid +% setting catcodes prematurely. Doing it this way means that, for +% example, @inlineraw{html, foo{bar} gets a parse error instead of being +% ignored. But this isn't important because if people want a literal +% *right* brace they would have to use a command anyway, so they may as +% well use a command to get a left brace too. We could re-use the +% delimiter character idea from \verb, but it seems like overkill. +% +\long\def\inlineraw{\tex \doinlineraw} +\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish} +\def\doinlinerawtwo#1,#2,\finish{% + \def\inlinerawname{#1}% + \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi + \endgroup % close group opened by \tex. } \message{glyphs,} +% and logos. + +% @@ prints an @, as does @atchar{}. +\def\@{\char64 } +\let\atchar=\@ + +% @{ @} @lbracechar{} @rbracechar{} all generate brace characters. +% Unless we're in typewriter, use \ecfont because the CM text fonts do +% not have braces, and we don't want to switch into math. +\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}} +\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}} +\let\{=\mylbrace \let\lbracechar=\{ +\let\}=\myrbrace \let\rbracechar=\} +\begingroup + % Definitions to produce \{ and \} commands for indices, + % and @{ and @} for the aux/toc files. + \catcode`\{ = \other \catcode`\} = \other + \catcode`\[ = 1 \catcode`\] = 2 + \catcode`\! = 0 \catcode`\\ = \other + !gdef!lbracecmd[\{]% + !gdef!rbracecmd[\}]% + !gdef!lbraceatcmd[@{]% + !gdef!rbraceatcmd[@}]% +!endgroup + +% @comma{} to avoid , parsing problems. +\let\comma = , + +% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent +% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. +\let\, = \ptexc +\let\dotaccent = \ptexdot +\def\ringaccent#1{{\accent23 #1}} +\let\tieaccent = \ptext +\let\ubaraccent = \ptexb +\let\udotaccent = \d + +% Other special characters: @questiondown @exclamdown @ordf @ordm +% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. +\def\questiondown{?`} +\def\exclamdown{!`} +\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} +\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} + +% Dotless i and dotless j, used for accents. +\def\imacro{i} +\def\jmacro{j} +\def\dotless#1{% + \def\temp{#1}% + \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi + \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi + \else \errmessage{@dotless can be used only with i or j}% + \fi\fi +} + +% The \TeX{} logo, as in plain, but resetting the spacing so that a +% period following counts as ending a sentence. (Idea found in latex.) +% +\edef\TeX{\TeX \spacefactor=1000 } + +% @LaTeX{} logo. Not quite the same results as the definition in +% latex.ltx, since we use a different font for the raised A; it's most +% convenient for us to use an explicitly smaller font, rather than using +% the \scriptstyle font (since we don't reset \scriptstyle and +% \scriptscriptstyle). +% +\def\LaTeX{% + L\kern-.36em + {\setbox0=\hbox{T}% + \vbox to \ht0{\hbox{% + \ifx\textnominalsize\xwordpt + % for 10pt running text, \lllsize (8pt) is too small for the A in LaTeX. + % Revert to plain's \scriptsize, which is 7pt. + \count255=\the\fam $\fam\count255 \scriptstyle A$% + \else + % For 11pt, we can use our lllsize. + \selectfonts\lllsize A% + \fi + }% + \vss + }}% + \kern-.15em + \TeX +} + +% Some math mode symbols. +\def\bullet{$\ptexbullet$} +\def\geq{\ifmmode \ge\else $\ge$\fi} +\def\leq{\ifmmode \le\else $\le$\fi} +\def\minus{\ifmmode -\else $-$\fi} + +% @dots{} outputs an ellipsis using the current font. +% We do .5em per period so that it has the same spacing in the cm +% typewriter fonts as three actual period characters; on the other hand, +% in other typewriter fonts three periods are wider than 1.5em. So do +% whichever is larger. +% +\def\dots{% + \leavevmode + \setbox0=\hbox{...}% get width of three periods + \ifdim\wd0 > 1.5em + \dimen0 = \wd0 + \else + \dimen0 = 1.5em + \fi + \hbox to \dimen0{% + \hskip 0pt plus.25fil + .\hskip 0pt plus1fil + .\hskip 0pt plus1fil + .\hskip 0pt plus.5fil + }% +} + +% @enddots{} is an end-of-sentence ellipsis. +% +\def\enddots{% + \dots + \spacefactor=\endofsentencespacefactor +} % @point{}, @result{}, @expansion{}, @print{}, @equiv{}. % @@ -2842,7 +3026,7 @@ end {\tentt \global\dimen0 = 3em}% Width of the box. \dimen2 = .55pt % Thickness of rules % The text. (`r' is open on the right, `e' somewhat less so on the left.) -\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt} +\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt} % \setbox\errorbox=\hbox to \dimen0{\hfil \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. @@ -2963,12 +3147,17 @@ end % hopefully nobody will notice/care. \edef\ecsize{\csname\curfontsize ecsize\endcsname}% \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}% - \ifx\curfontstyle\bfstylename - % bold: - \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize + \ifmonospace + % typewriter: + \font\thisecfont = ectt\ecsize \space at \nominalsize \else - % regular: - \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \ifx\curfontstyle\bfstylename + % bold: + \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize + \else + % regular: + \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \fi \fi \thisecfont } @@ -2991,7 +3180,7 @@ end % Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 % so we'll define it if necessary. % -\ifx\Orb\undefined +\ifx\Orb\thisisundefined \def\Orb{\mathhexbox20D} \fi @@ -3019,8 +3208,9 @@ end \newif\ifsetshortcontentsaftertitlepage \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue -\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% - \endgroup\page\hbox{}\page} +\parseargdef\shorttitlepage{% + \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}% + \endgroup\page\hbox{}\page} \envdef\titlepage{% % Open one extra group, as we want to close it in the middle of \Etitlepage. @@ -3080,14 +3270,28 @@ end \finishedtitlepagetrue } -%%% Macros to be used within @titlepage: +% Settings used for typesetting titles: no hyphenation, no indentation, +% don't worry much about spacing, ragged right. This should be used +% inside a \vbox, and fonts need to be set appropriately first. Because +% it is always used for titles, nothing else, we call \rmisbold. \par +% should be specified before the end of the \vbox, since a vbox is a group. +% +\def\raggedtitlesettings{% + \rmisbold + \hyphenpenalty=10000 + \parindent=0pt + \tolerance=5000 + \ptexraggedright +} + +% Macros to be used within @titlepage: \let\subtitlerm=\tenrm \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} \parseargdef\title{% \checkenv\titlepage - \leftline{\titlefonts\rmisbold #1} + \vbox{\titlefonts \raggedtitlesettings #1\par}% % print a rule at the page bottom also. \finishedtitlepagefalse \vskip4pt \hrule height 4pt width \hsize \vskip4pt @@ -3113,7 +3317,7 @@ end } -%%% Set up page headings and footings. +% Set up page headings and footings. \let\thispage=\folio @@ -3207,10 +3411,14 @@ end \def\headings #1 {\csname HEADINGS#1\endcsname} -\def\HEADINGSoff{% -\global\evenheadline={\hfil} \global\evenfootline={\hfil} -\global\oddheadline={\hfil} \global\oddfootline={\hfil}} -\HEADINGSoff +\def\headingsoff{% non-global headings elimination + \evenheadline={\hfil}\evenfootline={\hfil}% + \oddheadline={\hfil}\oddfootline={\hfil}% +} + +\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting +\HEADINGSoff % it's the default + % When we turn headings on, set the page number to 1. % For double-sided printing, put current file name in lower left corner, % chapter name on inside top of right hand pages, document @@ -3261,7 +3469,7 @@ end % This produces Day Month Year style of output. % Only define if not already defined, in case a txi-??.tex file has set % up a different format (e.g., txi-cs.tex does this). -\ifx\today\undefined +\ifx\today\thisisundefined \def\today{% \number\day\space \ifcase\month @@ -3322,7 +3530,7 @@ end \begingroup \advance\leftskip by-\tableindent \advance\hsize by\tableindent - \advance\rightskip by0pt plus1fil + \advance\rightskip by0pt plus1fil\relax \leavevmode\unhbox0\par \endgroup % @@ -3808,18 +4016,18 @@ end \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip \global\advance\multitablelinespace by-\ht0 \fi -%% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. -%% If so, set to same dimension as multitablelinespace. +% Test to see if parskip is larger than space between lines of +% table. If not, do nothing. +% If so, set to same dimension as multitablelinespace. \ifdim\multitableparskip>\multitablelinespace \global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. +\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller + % than skip between lines in the table. \fi% \ifdim\multitableparskip=0pt \global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. +\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller + % than skip between lines in the table. \fi} @@ -3980,7 +4188,7 @@ end % ..., but we might end up with active ones in the argument if % we're called from @code, as @code{@value{foo-bar_}}, though. % So \let them to their normal equivalents. - \let-\realdash \let_\normalunderscore + \let-\normaldash \let_\normalunderscore } } @@ -4020,7 +4228,7 @@ end } \def\ifsetfail{\doignore{ifset}} -% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been +% @ifclear VAR ... @end executes the `...' iff VAR has never been % defined with @set, or has been undefined with @clear. % % The `\else' inside the `\doifset' parameter is a trick to reuse the @@ -4031,6 +4239,35 @@ end \def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}} \def\ifclearfail{\doignore{ifclear}} +% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written +% without the @) is in fact defined. We can only feasibly check at the +% TeX level, so something like `mathcode' is going to considered +% defined even though it is not a Texinfo command. +% +\makecond{ifcommanddefined} +\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}} +% +\def\doifcmddefined#1#2{{% + \makevalueexpandable + \let\next=\empty + \expandafter\ifx\csname #2\endcsname\relax + #1% If not defined, \let\next as above. + \fi + \expandafter + }\next +} +\def\ifcmddefinedfail{\doignore{ifcommanddefined}} + +% @ifcommandnotdefined CMD ... handled similar to @ifclear above. +\makecond{ifcommandnotdefined} +\def\ifcommandnotdefined{% + \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}} +\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}} + +% Set the `txicommandconditionals' variable, so documents have a way to +% test if the @ifcommand...defined conditionals are available. +\set txicommandconditionals + % @dircategory CATEGORY -- specify a category of the dir file % which this file should belong to. Ignore this in TeX. \let\dircategory=\comment @@ -4134,11 +4371,14 @@ end \def\@{@}% change to @@ when we switch to @ as escape char in index files. \def\ {\realbackslash\space }% % - % Need these in case \tex is in effect and \{ is a \delimiter again. - % But can't use \lbracecmd and \rbracecmd because texindex assumes - % braces and backslashes are used only as delimiters. - \let\{ = \mylbrace - \let\} = \myrbrace + % Need these unexpandable (because we define \tt as a dummy) + % definitions when @{ or @} appear in index entry text. Also, more + % complicated, when \tex is in effect and \{ is a \delimiter again. + % We can't use \lbracecmd and \rbracecmd because texindex assumes + % braces and backslashes are used only as delimiters. Perhaps we + % should define @lbrace and @rbrace commands a la @comma. + \def\{{{\tt\char123}}% + \def\}{{\tt\char125}}% % % I don't entirely understand this, but when an index entry is % generated from a macro call, the \endinput which \scanmacro inserts @@ -4191,7 +4431,7 @@ end \def\commondummies{% % % \definedummyword defines \#1 as \string\#1\space, thus effectively - % preventing its expansion. This is used only for control% words, + % preventing its expansion. This is used only for control words, % not control letters, because the \space would be incorrect for % control characters, but is needed to separate the control word % from whatever follows. @@ -4210,6 +4450,7 @@ end \commondummiesnofonts % \definedummyletter\_% + \definedummyletter\-% % % Non-English letters. \definedummyword\AA @@ -4246,20 +4487,25 @@ end \definedummyword\TeX % % Assorted special characters. + \definedummyword\arrow \definedummyword\bullet \definedummyword\comma \definedummyword\copyright \definedummyword\registeredsymbol \definedummyword\dots \definedummyword\enddots + \definedummyword\entrybreak \definedummyword\equiv \definedummyword\error \definedummyword\euro + \definedummyword\expansion + \definedummyword\geq \definedummyword\guillemetleft \definedummyword\guillemetright \definedummyword\guilsinglleft \definedummyword\guilsinglright - \definedummyword\expansion + \definedummyword\lbracechar + \definedummyword\leq \definedummyword\minus \definedummyword\ogonek \definedummyword\pounds @@ -4271,6 +4517,7 @@ end \definedummyword\quoteleft \definedummyword\quoteright \definedummyword\quotesinglbase + \definedummyword\rbracechar \definedummyword\result \definedummyword\textdegree % @@ -4316,19 +4563,27 @@ end \definedummyword\b \definedummyword\i \definedummyword\r + \definedummyword\sansserif \definedummyword\sc + \definedummyword\slanted \definedummyword\t % % Commands that take arguments. + \definedummyword\abbr \definedummyword\acronym + \definedummyword\anchor \definedummyword\cite \definedummyword\code \definedummyword\command \definedummyword\dfn + \definedummyword\dmn \definedummyword\email \definedummyword\emph \definedummyword\env \definedummyword\file + \definedummyword\image + \definedummyword\indicateurl + \definedummyword\inforef \definedummyword\kbd \definedummyword\key \definedummyword\math @@ -4356,7 +4611,7 @@ end \def\definedummyaccent##1{\let##1\asis}% % We can just ignore other control letters. \def\definedummyletter##1{\let##1\empty}% - % Hopefully, all control words can become @asis. + % All control words become @asis by default; overrides below. \let\definedummyword\definedummyaccent % \commondummiesnofonts @@ -4368,8 +4623,17 @@ end % \def\ { }% \def\@{@}% - % how to handle braces? \def\_{\normalunderscore}% + \def\-{}% @- shouldn't affect sorting + % + % Unfortunately, texindex is not prepared to handle braces in the + % content at all. So for index sorting, we map @{ and @} to strings + % starting with |, since that ASCII character is between ASCII { and }. + \def\{{|a}% + \def\lbracechar{|a}% + % + \def\}{|b}% + \def\rbracechar{|b}% % % Non-English letters. \def\AA{AA}% @@ -4397,6 +4661,7 @@ end % % Assorted special characters. % (The following {} will end up in the sort string, but that's ok.) + \def\arrow{->}% \def\bullet{bullet}% \def\comma{,}% \def\copyright{copyright}% @@ -4406,10 +4671,12 @@ end \def\error{error}% \def\euro{euro}% \def\expansion{==>}% + \def\geq{>=}% \def\guillemetleft{<<}% \def\guillemetright{>>}% \def\guilsinglleft{<}% \def\guilsinglright{>}% + \def\leq{<=}% \def\minus{-}% \def\point{.}% \def\pounds{pounds}% @@ -4424,6 +4691,9 @@ end \def\result{=>}% \def\textdegree{o}% % + \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax + \else \indexlquoteignore \fi + % % We need to get rid of all macros, leaving only the arguments (if present). % Of course this is not nearly correct, but it is the best we can do for now. % makeinfo does not expand macros in the argument to @deffn, which ends up @@ -4437,6 +4707,11 @@ end \macrolist } +% Undocumented (for FSFS 2nd ed.): @set txiindexlquoteignore makes us +% ignore left quotes in the sort term. +{\catcode`\`=\active + \gdef\indexlquoteignore{\let`=\empty}} + \let\indexbackslash=0 %overridden during \printindex. \let\SETmarginindex=\relax % put index entries in margin (undocumented)? @@ -4534,10 +4809,9 @@ end % % ..., ready, GO: % -\def\safewhatsit#1{% -\ifhmode +\def\safewhatsit#1{\ifhmode #1% -\else + \else % \lastskip and \lastpenalty cannot both be nonzero simultaneously. \whatsitskip = \lastskip \edef\lastskipmacro{\the\lastskip}% @@ -4561,7 +4835,6 @@ end % to re-insert the same penalty (values >10000 are used for various % signals); since we just inserted a non-discardable item, any % following glue (such as a \parskip) would be a breakpoint. For example: - % % @deffn deffn-whatever % @vindex index-whatever % Description. @@ -4574,8 +4847,7 @@ end % (the whatsit from the \write), so we must insert a \nobreak. \nobreak\vskip\whatsitskip \fi -\fi -} +\fi} % The index entry written in the file actually looks like % \entry {sortstring}{page}{topic} @@ -4694,7 +4966,6 @@ end % But this freezes the catcodes in the argument, and can cause problems to % @code, which sets - active. This problem was fixed by a kludge--- % ``-'' was active throughout whole index, but this isn't really right. -% % The right solution is to prevent \entry from swallowing the whole text. % --kasal, 21nov03 \def\entry{% @@ -4731,10 +5002,17 @@ end % columns. \vskip 0pt plus1pt % + % When reading the text of entry, convert explicit line breaks + % from @* into spaces. The user might give these in long section + % titles, for instance. + \def\*{\unskip\space\ignorespaces}% + \def\entrybreak{\hfil\break}% + % % Swallow the left brace of the text (first parameter): \afterassignment\doentry \let\temp = } +\def\entrybreak{\unskip\space\ignorespaces}% \def\doentry{% \bgroup % Instead of the swallowed brace. \noindent @@ -4967,7 +5245,22 @@ end \message{sectioning,} % Chapters, sections, etc. -% \unnumberedno is an oxymoron, of course. But we count the unnumbered +% Let's start with @part. +\outer\parseargdef\part{\partzzz{#1}} +\def\partzzz#1{% + \chapoddpage + \null + \vskip.3\vsize % move it down on the page a bit + \begingroup + \noindent \titlefonts\rmisbold #1\par % the text + \let\lastnode=\empty % no node to associate with + \writetocentry{part}{#1}{}% but put it in the toc + \headingsoff % no headline or footline on the part page + \chapoddpage + \endgroup +} + +% \unnumberedno is an oxymoron. But we count the unnumbered % sections so that we can refer to them unambiguously in the pdf % outlines by their "section number". We avoid collisions with chapter % numbers by starting them at 10000. (If a document ever has 10000 @@ -5046,8 +5339,8 @@ end \chardef\maxseclevel = 3 % % A numbered section within an unnumbered changes to unnumbered too. -% To achive this, remember the "biggest" unnum. sec. we are currently in: -\chardef\unmlevel = \maxseclevel +% To achieve this, remember the "biggest" unnum. sec. we are currently in: +\chardef\unnlevel = \maxseclevel % % Trace whether the current chapter is an appendix or not: % \chapheadtype is "N" or "A", unnumbered chapters are ignored. @@ -5072,8 +5365,8 @@ end % The heading type: \def\headtype{#1}% \if \headtype U% - \ifnum \absseclevel < \unmlevel - \chardef\unmlevel = \absseclevel + \ifnum \absseclevel < \unnlevel + \chardef\unnlevel = \absseclevel \fi \else % Check for appendix sections: @@ -5085,10 +5378,10 @@ end \fi\fi \fi % Check for numbered within unnumbered: - \ifnum \absseclevel > \unmlevel + \ifnum \absseclevel > \unnlevel \def\headtype{U}% \else - \chardef\unmlevel = 3 + \chardef\unnlevel = 3 \fi \fi % Now print the heading: @@ -5174,7 +5467,8 @@ end \global\let\subsubsection = \appendixsubsubsec } -\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz +% normally unnmhead0 calls unnumberedzzz: +\outer\parseargdef\unnumbered{\unnmhead0{#1}} \def\unnumberedzzz#1{% \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 \global\advance\unnumberedno by 1 @@ -5218,40 +5512,47 @@ end \let\top\unnumbered % Sections. +% \outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz \def\seczzz#1{% \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}% } -\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz +% normally calls appendixsectionzzz: +\outer\parseargdef\appendixsection{\apphead1{#1}} \def\appendixsectionzzz#1{% \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}% } \let\appendixsec\appendixsection -\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz +% normally calls unnumberedseczzz: +\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} \def\unnumberedseczzz#1{% \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}% } % Subsections. -\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz +% +% normally calls numberedsubseczzz: +\outer\parseargdef\numberedsubsec{\numhead2{#1}} \def\numberedsubseczzz#1{% \global\subsubsecno=0 \global\advance\subsecno by 1 \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}% } -\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz +% normally calls appendixsubseczzz: +\outer\parseargdef\appendixsubsec{\apphead2{#1}} \def\appendixsubseczzz#1{% \global\subsubsecno=0 \global\advance\subsecno by 1 \sectionheading{#1}{subsec}{Yappendix}% {\appendixletter.\the\secno.\the\subsecno}% } -\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz +% normally calls unnumberedsubseczzz: +\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} \def\unnumberedsubseczzz#1{% \global\subsubsecno=0 \global\advance\subsecno by 1 \sectionheading{#1}{subsec}{Ynothing}% @@ -5259,21 +5560,25 @@ end } % Subsubsections. -\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz +% +% normally numberedsubsubseczzz: +\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} \def\numberedsubsubseczzz#1{% \global\advance\subsubsecno by 1 \sectionheading{#1}{subsubsec}{Ynumbered}% {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}% } -\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz +% normally appendixsubsubseczzz: +\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} \def\appendixsubsubseczzz#1{% \global\advance\subsubsecno by 1 \sectionheading{#1}{subsubsec}{Yappendix}% {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}% } -\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz +% normally unnumberedsubsubseczzz: +\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} \def\unnumberedsubsubseczzz#1{% \global\advance\subsubsecno by 1 \sectionheading{#1}{subsubsec}{Ynothing}% @@ -5289,14 +5594,6 @@ end % Define @majorheading, @heading and @subheading -% NOTE on use of \vbox for chapter headings, section headings, and such: -% 1) We use \vbox rather than the earlier \line to permit -% overlong headings to fold. -% 2) \hyphenpenalty is set to 10000 because hyphenation in a -% heading is obnoxious; this forbids it. -% 3) Likewise, headings look best if no \parindent is used, and -% if justification is not attempted. Hence \raggedright. - \def\majorheading{% {\advance\chapheadingskip by 10pt \chapbreak }% \parsearg\chapheadingzzz @@ -5304,10 +5601,8 @@ end \def\chapheading{\chapbreak \parsearg\chapheadingzzz} \def\chapheadingzzz#1{% - {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\ptexraggedright - \rmisbold #1\hfill}}% - \bigskip \par\penalty 200\relax + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip \nobreak \suppressfirstparagraphindent } @@ -5323,14 +5618,13 @@ end % (including whitespace, linebreaking, etc. around it), % given all the information in convenient, parsed form. -%%% Args are the skip and penalty (usually negative) +% Args are the skip and penalty (usually negative) \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} -%%% Define plain chapter starts, and page on/off switching for it % Parameter controlling skip before chapter headings (if needed) - \newskip\chapheadingskip +% Define plain chapter starts, and page on/off switching for it. \def\chapbreak{\dobreak \chapheadingskip {-4000}} \def\chappager{\par\vfill\supereject} % Because \domark is called before \chapoddpage, the filler page will @@ -5340,9 +5634,8 @@ end \chappager \ifodd\pageno \else \begingroup - \evenheadline={\hfil}\evenfootline={\hfil}% - \oddheadline={\hfil}\oddfootline={\hfil}% - \hbox to 0pt{}% + \headingsoff + \null \chappager \endgroup \fi @@ -5468,8 +5761,7 @@ end % % Typeset the actual heading. \nobreak % Avoid page breaks at the interline glue. - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright - \hangindent=\wd0 \centerparametersmaybe + \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe \unhbox0 #1\par}% }% \nobreak\bigskip % no page break after a chapter title @@ -5491,18 +5783,18 @@ end \def\setchapterstyle #1 {\csname CHAPF#1\endcsname} % \def\unnchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\ptexraggedright - \rmisbold #1\hfill}}\bigskip \par\nobreak + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip\nobreak } \def\chfopen #1#2{\chapoddpage {\chapfonts \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% \par\penalty 5000 % } \def\centerchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt - \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}% + \nobreak\bigskip \nobreak } \def\CHAPFopen{% \global\let\chapmacro=\chfopen @@ -5534,6 +5826,8 @@ end % \def\sectionheading#1#2#3#4{% {% + \checkenv{}% should not be in an environment. + % % Switch to the right set of fonts. \csname #2fonts\endcsname \rmisbold % @@ -5645,15 +5939,15 @@ end % % We'll almost certainly start a paragraph next, so don't let that % glue accumulate. (Not a breakpoint because it's preceded by a - % discardable item.) + % discardable item.) However, when a paragraph is not started next + % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out + % or the negative glue will cause weirdly wrong output, typically + % obscuring the section heading with something else. \vskip-\parskip % - % This is purely so the last item on the list is a known \penalty > - % 10000. This is so \startdefun can avoid allowing breakpoints after - % section headings. Otherwise, it would insert a valid breakpoint between: - % - % @section sec-whatever - % @deffn def-whatever + % This is so the last item on the main vertical list is a known + % \penalty > 10000, so \startdefun, etc., can recognize the situation + % and do the needful. \penalty 10001 } @@ -5785,6 +6079,7 @@ end \def\summarycontents{% \startcontents{\putwordShortTOC}% % + \let\partentry = \shortpartentry \let\numchapentry = \shortchapentry \let\appentry = \shortchapentry \let\unnchapentry = \shortunnchapentry @@ -5840,6 +6135,19 @@ end % The last argument is the page number. % The arguments in between are the chapter number, section number, ... +% Parts, in the main contents. Replace the part number, which doesn't +% exist, with an empty box. Let's hope all the numbers have the same width. +% Also ignore the page number, which is conventionally not printed. +\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}} +\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}} +% +% Parts, in the short toc. +\def\shortpartentry#1#2#3#4{% + \penalty-300 + \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip + \shortchapentry{{\bf #1}}{\numeralbox}{}{}% +} + % Chapters, in the main contents. \def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}} % @@ -5929,9 +6237,9 @@ end \message{environments,} % @foo ... @end foo. -% @tex ... @end tex escapes into raw Tex temporarily. +% @tex ... @end tex escapes into raw TeX temporarily. % One exception: @ is still an escape character, so that @end tex works. -% But \@ or @@ will get a plain tex @ character. +% But \@ or @@ will get a plain @ character. \envdef\tex{% \setupmarkupstyle{tex}% @@ -5948,6 +6256,10 @@ end \catcode`\'=\other \escapechar=`\\ % + % ' is active in math mode (mathcode"8000). So reset it, and all our + % other math active characters (just in case), to plain's definitions. + \mathactive + % \let\b=\ptexb \let\bullet=\ptexbullet \let\c=\ptexc @@ -6051,6 +6363,12 @@ end \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip % Flag to tell @lisp, etc., not to narrow margin. \let\nonarrowing = t% + % + % If this cartouche directly follows a sectioning command, we need the + % \parskip glue (backspaced over by default) or the cartouche can + % collide with the section heading. + \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi + % \vbox\bgroup \baselineskip=0pt\parskip=0pt\lineskip=0pt \carttop @@ -6064,7 +6382,7 @@ end \lineskip=\normlskip \parskip=\normpskip \vskip -\parskip - \comment % For explanation, see the end of \def\group. + \comment % For explanation, see the end of def\group. } \def\Ecartouche{% \ifhmode\par\fi @@ -6150,41 +6468,42 @@ end } % We often define two environments, @foo and @smallfoo. -% Let's do it by one command: -\def\makedispenv #1#2{ - \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2} - \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2} +% Let's do it in one command. #1 is the env name, #2 the definition. +\def\makedispenvdef#1#2{% + \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}% + \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}% \expandafter\let\csname E#1\endcsname \afterenvbreak \expandafter\let\csname Esmall#1\endcsname \afterenvbreak } -% Define two synonyms: -\def\maketwodispenvs #1#2#3{ - \makedispenv{#1}{#3} - \makedispenv{#2}{#3} +% Define two environment synonyms (#1 and #2) for an environment. +\def\maketwodispenvdef#1#2#3{% + \makedispenvdef{#1}{#3}% + \makedispenvdef{#2}{#3}% } - -% @lisp: indented, narrowed, typewriter font; @example: same as @lisp. +% +% @lisp: indented, narrowed, typewriter font; +% @example: same as @lisp. % % @smallexample and @smalllisp: use smaller fonts. % Originally contributed by Pavel@xerox. % -\maketwodispenvs {lisp}{example}{% +\maketwodispenvdef{lisp}{example}{% \nonfillstart \tt\setupmarkupstyle{example}% \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. - \gobble % eat return + \gobble % eat return } % @display/@smalldisplay: same as @lisp except keep current font. % -\makedispenv {display}{% +\makedispenvdef{display}{% \nonfillstart \gobble } % @format/@smallformat: same as @display except don't narrow margins. % -\makedispenv{format}{% +\makedispenvdef{format}{% \let\nonarrowing = t% \nonfillstart \gobble @@ -6203,7 +6522,7 @@ end \envdef\flushright{% \let\nonarrowing = t% \nonfillstart - \advance\leftskip by 0pt plus 1fill + \advance\leftskip by 0pt plus 1fill\relax \gobble } \let\Eflushright = \afterenvbreak @@ -6238,43 +6557,28 @@ end % we're doing normal filling. So, when using \aboveenvbreak and % \afterenvbreak, temporarily make \parskip 0. % +\makedispenvdef{quotation}{\quotationstart} +% \def\quotationstart{% - {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip - \parindent=0pt - % - % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \indentedblockstart % same as \indentedblock, but increase right margin too. \ifx\nonarrowing\relax - \advance\leftskip by \lispnarrowing \advance\rightskip by \lispnarrowing - \exdentamount = \lispnarrowing - \else - \let\nonarrowing = \relax \fi \parsearg\quotationlabel } -\envdef\quotation{% - \setnormaldispenv - \quotationstart -} - -\envdef\smallquotation{% - \setsmalldispenv - \quotationstart -} -\let\Esmallquotation = \Equotation - % We have retained a nonzero parskip for the environment, since we're % doing normal filling. % \def\Equotation{% \par - \ifx\quotationauthor\undefined\else + \ifx\quotationauthor\thisisundefined\else % indent a bit. \leftline{\kern 2\leftskip \sl ---\quotationauthor}% \fi {\parskip=0pt \afterenvbreak}% } +\def\Esmallquotation{\Equotation} % If we're given an argument, typeset it in bold with a colon after. \def\quotationlabel#1{% @@ -6284,6 +6588,32 @@ end \fi } +% @indentedblock is like @quotation, but indents only on the left and +% has no optional argument. +% +\makedispenvdef{indentedblock}{\indentedblockstart} +% +\def\indentedblockstart{% + {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip + \parindent=0pt + % + % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \ifx\nonarrowing\relax + \advance\leftskip by \lispnarrowing + \exdentamount = \lispnarrowing + \else + \let\nonarrowing = \relax + \fi +} + +% Keep a nonzero parskip for the environment, since we're doing normal filling. +% +\def\Eindentedblock{% + \par + {\parskip=0pt \afterenvbreak}% +} +\def\Esmallindentedblock{\Eindentedblock} + % LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>} % If we want to allow any <char> as delimiter, @@ -6331,21 +6661,28 @@ end % Setup for the @verbatim environment % -% Real tab expansion +% Real tab expansion. \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount % -\def\starttabbox{\setbox0=\hbox\bgroup} +% We typeset each line of the verbatim in an \hbox, so we can handle +% tabs. The \global is in case the verbatim line starts with an accent, +% or some other command that starts with a begin-group. Otherwise, the +% entire \verbbox would disappear at the corresponding end-group, before +% it is typeset. Meanwhile, we can't have nested verbatim commands +% (can we?), so the \global won't be overwriting itself. +\newbox\verbbox +\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup} % \begingroup \catcode`\^^I=\active \gdef\tabexpand{% \catcode`\^^I=\active \def^^I{\leavevmode\egroup - \dimen0=\wd0 % the width so far, or since the previous tab - \divide\dimen0 by\tabw - \multiply\dimen0 by\tabw % compute previous multiple of \tabw - \advance\dimen0 by\tabw % advance to next multiple of \tabw - \wd0=\dimen0 \box0 \starttabbox + \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab + \divide\dimen\verbbox by\tabw + \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw + \advance\dimen\verbbox by\tabw % advance to next multiple of \tabw + \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox }% } \endgroup @@ -6354,15 +6691,16 @@ end \def\setupverbatim{% \let\nonarrowing = t% \nonfillstart - % Easiest (and conventionally used) font for verbatim - \tt - \def\par{\leavevmode\egroup\box0\endgraf}% + \tt % easiest (and conventionally used) font for verbatim + % The \leavevmode here is for blank lines. Otherwise, we would + % never \starttabox and the \egroup would end verbatim mode. + \def\par{\leavevmode\egroup\box\verbbox\endgraf}% \tabexpand \setupmarkupstyle{verbatim}% % Respect line breaks, % print special symbols as themselves, and - % make each space count - % must do in this order: + % make each space count. + % Must do in this order: \obeylines \uncatcodespecials \sepspaces \everypar{\starttabbox}% } @@ -6419,6 +6757,7 @@ end \makevalueexpandable \setupverbatim \indexnofonts % Allow `@@' and other weird things in file names. + \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}% \input #1 \afterenvbreak }% @@ -6468,7 +6807,7 @@ end % commands also insert a nobreak penalty, and we don't want to allow % a break between a section heading and a defun. % - % As a minor refinement, we avoid "club" headers by signalling + % As a further refinement, we avoid "club" headers by signalling % with penalty of 10003 after the very first @deffn in the % sequence (see above), and penalty of 10002 after any following % @def command. @@ -6505,7 +6844,7 @@ end #1#2 \endheader % common ending: \interlinepenalty = 10000 - \advance\rightskip by 0pt plus 1fil + \advance\rightskip by 0pt plus 1fil\relax \endgraf \nobreak\vskip -\parskip \penalty\defunpenalty % signal to \startdefun and \dodefunx @@ -6535,13 +6874,36 @@ end \def\domakedefun#1#2#3{% \envdef#1{% \startdefun + \doingtypefnfalse % distinguish typed functions from all else \parseargusing\activeparens{\printdefunline#3}% }% \def#2{\dodefunx#1}% \def#3% } -%%% Untyped functions: +\newif\ifdoingtypefn % doing typed function? +\newif\ifrettypeownline % typeset return type on its own line? + +% @deftypefnnewline on|off says whether the return type of typed functions +% are printed on their own line. This affects @deftypefn, @deftypefun, +% @deftypeop, and @deftypemethod. +% +\parseargdef\deftypefnnewline{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxideftypefnnl\endcsname + = \empty + \else\ifx\temp\offword + \expandafter\let\csname SETtxideftypefnnl\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @txideftypefnnl value `\temp', + must be on|off}% + \fi\fi +} + +% Untyped functions: % @deffn category name args \makedefun{deffn}{\deffngeneral{}} @@ -6560,7 +6922,7 @@ end \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% } -%%% Typed functions: +% Typed functions: % @deftypefn category type name args \makedefun{deftypefn}{\deftypefngeneral{}} @@ -6575,10 +6937,11 @@ end % \def\deftypefngeneral#1#2 #3 #4 #5\endheader{% \dosubind{fn}{\code{#4}}{#1}% + \doingtypefntrue \defname{#2}{#3}{#4}\defunargs{#5\unskip}% } -%%% Typed variables: +% Typed variables: % @deftypevr category type var args \makedefun{deftypevr}{\deftypecvgeneral{}} @@ -6596,7 +6959,7 @@ end \defname{#2}{#3}{#4}\defunargs{#5\unskip}% } -%%% Untyped variables: +% Untyped variables: % @defvr category var args \makedefun{defvr}#1 {\deftypevrheader{#1} {} } @@ -6607,7 +6970,8 @@ end % \defcvof {category of}class var args \def\defcvof#1#2 {\deftypecvof{#1}#2 {} } -%%% Type: +% Types: + % @deftp category name args \makedefun{deftp}#1 #2 #3\endheader{% \doind{tp}{\code{#2}}% @@ -6635,25 +6999,49 @@ end % We are followed by (but not passed) the arguments, if any. % \def\defname#1#2#3{% + \par % Get the values of \leftskip and \rightskip as they were outside the @def... \advance\leftskip by -\defbodyindent % - % How we'll format the type name. Putting it in brackets helps + % Determine if we are typesetting the return type of a typed function + % on a line by itself. + \rettypeownlinefalse + \ifdoingtypefn % doing a typed function specifically? + % then check user option for putting return type on its own line: + \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else + \rettypeownlinetrue + \fi + \fi + % + % How we'll format the category name. Putting it in brackets helps % distinguish it from the body text that may end up on the next line % just below it. \def\temp{#1}% \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi} % - % Figure out line sizes for the paragraph shape. + % Figure out line sizes for the paragraph shape. We'll always have at + % least two. + \tempnum = 2 + % % The first line needs space for \box0; but if \rightskip is nonzero, % we need only space for the part of \box0 which exceeds it: \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip + % + % If doing a return type on its own line, we'll have another line. + \ifrettypeownline + \advance\tempnum by 1 + \def\maybeshapeline{0in \hsize}% + \else + \def\maybeshapeline{}% + \fi + % % The continuations: \dimen2=\hsize \advance\dimen2 by -\defargsindent - % (plain.tex says that \dimen1 should be used only as global.) - \parshape 2 0in \dimen0 \defargsindent \dimen2 % - % Put the type name to the right margin. + % The final paragraph shape: + \parshape \tempnum 0in \dimen0 \maybeshapeline \defargsindent \dimen2 + % + % Put the category name at the right margin. \noindent \hbox to 0pt{% \hfil\box0 \kern-\hsize @@ -6675,8 +7063,16 @@ end % . this still does not fix the ?` and !` ligatures, but so far no % one has made identifiers using them :). \df \tt - \def\temp{#2}% return value type - \ifx\temp\empty\else \tclose{\temp} \fi + \def\temp{#2}% text of the return type + \ifx\temp\empty\else + \tclose{\temp}% typeset the return type + \ifrettypeownline + % put return type on its own line; prohibit line break following: + \hfil\vadjust{\nobreak}\break + \else + \space % type on same line, so just followed by a space + \fi + \fi % no return type #3% output function name }% {\rm\enskip}% hskip 0.5 em of \tenrm @@ -6696,7 +7092,10 @@ end \df \sl \hyphenchar\font=0 % % On the other hand, if an argument has two dashes (for instance), we - % want a way to get ttsl. Let's try @var for that. + % want a way to get ttsl. We used to recommend @var for that, so + % leave the code in, but it's strange for @var to lead to typewriter. + % Nowadays we recommend @code, since the difference between a ttsl hyphen + % and a tt hyphen is pretty tiny. @code also disables ?` !`. \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}% #1% \sl\hyphenchar\font=45 @@ -6794,7 +7193,7 @@ end % To do this right we need a feature of e-TeX, \scantokens, % which we arrange to emulate with a temporary file in ordinary TeX. -\ifx\eTeXversion\undefined +\ifx\eTeXversion\thisisundefined \newwrite\macscribble \def\scantokens#1{% \toks0={#1}% @@ -6805,25 +7204,30 @@ end } \fi -\def\scanmacro#1{% - \begingroup - \newlinechar`\^^M - \let\xeatspaces\eatspaces - % Undo catcode changes of \startcontents and \doprintindex - % When called from @insertcopying or (short)caption, we need active - % backslash to get it printed correctly. Previously, we had - % \catcode`\\=\other instead. We'll see whether a problem appears - % with macro expansion. --kasal, 19aug04 - \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ - % ... and \example - \spaceisspace - % - % Append \endinput to make sure that TeX does not see the ending newline. - % I've verified that it is necessary both for e-TeX and for ordinary TeX - % --kasal, 29nov03 - \scantokens{#1\endinput}% - \endgroup -} +\def\scanmacro#1{\begingroup + \newlinechar`\^^M + \let\xeatspaces\eatspaces + % + % Undo catcode changes of \startcontents and \doprintindex + % When called from @insertcopying or (short)caption, we need active + % backslash to get it printed correctly. Previously, we had + % \catcode`\\=\other instead. We'll see whether a problem appears + % with macro expansion. --kasal, 19aug04 + \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ + % + % ... and for \example: + \spaceisspace + % + % The \empty here causes a following catcode 5 newline to be eaten as + % part of reading whitespace after a control sequence. It does not + % eat a catcode 13 newline. There's no good way to handle the two + % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX + % would then have different behavior). See the Macro Details node in + % the manual for the workaround we recommend for macros and + % line-oriented commands. + % + \scantokens{#1\empty}% +\endgroup} \def\scanexp#1{% \edef\temp{\noexpand\scanmacro{#1}}% @@ -6877,17 +7281,18 @@ end % Macro bodies are absorbed as an argument in a context where % all characters are catcode 10, 11 or 12, except \ which is active -% (as in normal texinfo). It is necessary to change the definition of \. - +% (as in normal texinfo). It is necessary to change the definition of \ +% to recognize macro arguments; this is the job of \mbodybackslash. +% % Non-ASCII encodings make 8-bit characters active, so un-activate % them to avoid their expansion. Must do this non-globally, to % confine the change to the current group. - +% % It's necessary to have hard CRs when the macro is executed. This is -% done by making ^^M (\endlinechar) catcode 12 when reading the macro +% done by making ^^M (\endlinechar) catcode 12 when reading the macro % body, and then making it the \newlinechar in \scanmacro. - -\def\scanctxt{% +% +\def\scanctxt{% used as subroutine \catcode`\"=\other \catcode`\+=\other \catcode`\<=\other @@ -6900,13 +7305,13 @@ end \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi } -\def\scanargctxt{% +\def\scanargctxt{% used for copying and captions, not macros. \scanctxt \catcode`\\=\other \catcode`\^^M=\other } -\def\macrobodyctxt{% +\def\macrobodyctxt{% used for @macro definitions \scanctxt \catcode`\{=\other \catcode`\}=\other @@ -6914,32 +7319,56 @@ end \usembodybackslash } -\def\macroargctxt{% +\def\macroargctxt{% used when scanning invocations \scanctxt - \catcode`\\=\other + \catcode`\\=0 } +% why catcode 0 for \ in the above? To recognize \\ \{ \} as "escapes" +% for the single characters \ { }. Thus, we end up with the "commands" +% that would be written @\ @{ @} in a Texinfo document. +% +% We already have @{ and @}. For @\, we define it here, and only for +% this purpose, to produce a typewriter backslash (so, the @\ that we +% define for @math can't be used with @macro calls): +% +\def\\{\normalbackslash}% +% +% We would like to do this for \, too, since that is what makeinfo does. +% But it is not possible, because Texinfo already has a command @, for a +% cedilla accent. Documents must use @comma{} instead. +% +% \anythingelse will almost certainly be an error of some kind. + % \mbodybackslash is the definition of \ in @macro bodies. % It maps \foo\ => \csname macarg.foo\endcsname => #N % where N is the macro parameter number. % We define \csname macarg.\endcsname to be \realbackslash, so % \\ in macro replacement text gets you a backslash. - +% {\catcode`@=0 @catcode`@\=@active @gdef@usembodybackslash{@let\=@mbodybackslash} @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname} } \expandafter\def\csname macarg.\endcsname{\realbackslash} +\def\margbackslash#1{\char`\#1 } + \def\macro{\recursivefalse\parsearg\macroxxx} \def\rmacro{\recursivetrue\parsearg\macroxxx} \def\macroxxx#1{% - \getargs{#1}% now \macname is the macname and \argl the arglist + \getargs{#1}% now \macname is the macname and \argl the arglist \ifx\argl\empty % no arguments - \paramno=0% + \paramno=0\relax \else \expandafter\parsemargdef \argl;% + \if\paramno>256\relax + \ifx\eTeXversion\thisisundefined + \errhelp = \EMsimple + \errmessage{You need eTeX to compile a file with macros with more than 256 arguments} + \fi + \fi \fi \if1\csname ismacro.\the\macname\endcsname \message{Warning: redefining \the\macname}% @@ -6986,46 +7415,269 @@ end % an opening brace, and that opening brace is not consumed. \def\getargs#1{\getargsxxx#1{}} \def\getargsxxx#1#{\getmacname #1 \relax\getmacargs} -\def\getmacname #1 #2\relax{\macname={#1}} +\def\getmacname#1 #2\relax{\macname={#1}} \def\getmacargs#1{\def\argl{#1}} +% For macro processing make @ a letter so that we can make Texinfo private macro names. +\edef\texiatcatcode{\the\catcode`\@} +\catcode `@=11\relax + % Parse the optional {params} list. Set up \paramno and \paramlist -% so \defmacro knows what to do. Define \macarg.blah for each blah -% in the params list, to be ##N where N is the position in that list. +% so \defmacro knows what to do. Define \macarg.BLAH for each BLAH +% in the params list to some hook where the argument si to be expanded. If +% there are less than 10 arguments that hook is to be replaced by ##N where N +% is the position in that list, that is to say the macro arguments are to be +% defined `a la TeX in the macro body. +% % That gets used by \mbodybackslash (above). - +% % We need to get `macro parameter char #' into several definitions. -% The technique used is stolen from LaTeX: let \hash be something +% The technique used is stolen from LaTeX: let \hash be something % unexpandable, insert that wherever you need a #, and then redefine % it to # just before using the token list produced. % % The same technique is used to protect \eatspaces till just before % the macro is used. - -\def\parsemargdef#1;{\paramno=0\def\paramlist{}% - \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,} +% +% If there are 10 or more arguments, a different technique is used, where the +% hook remains in the body, and when macro is to be expanded the body is +% processed again to replace the arguments. +% +% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the +% argument N value and then \edef the body (nothing else will expand because of +% the catcode regime underwhich the body was input). +% +% If you compile with TeX (not eTeX), and you have macros with 10 or more +% arguments, you need that no macro has more than 256 arguments, otherwise an +% error is produced. +\def\parsemargdef#1;{% + \paramno=0\def\paramlist{}% + \let\hash\relax + \let\xeatspaces\relax + \parsemargdefxxx#1,;,% + % In case that there are 10 or more arguments we parse again the arguments + % list to set new definitions for the \macarg.BLAH macros corresponding to + % each BLAH argument. It was anyhow needed to parse already once this list + % in order to count the arguments, and as macros with at most 9 arguments + % are by far more frequent than macro with 10 or more arguments, defining + % twice the \macarg.BLAH macros does not cost too much processing power. + \ifnum\paramno<10\relax\else + \paramno0\relax + \parsemmanyargdef@@#1,;,% 10 or more arguments + \fi +} \def\parsemargdefxxx#1,{% \if#1;\let\next=\relax \else \let\next=\parsemargdefxxx - \advance\paramno by 1% + \advance\paramno by 1 \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname {\xeatspaces{\hash\the\paramno}}% \edef\paramlist{\paramlist\hash\the\paramno,}% \fi\next} +\def\parsemmanyargdef@@#1,{% + \if#1;\let\next=\relax + \else + \let\next=\parsemmanyargdef@@ + \edef\tempb{\eatspaces{#1}}% + \expandafter\def\expandafter\tempa + \expandafter{\csname macarg.\tempb\endcsname}% + % Note that we need some extra \noexpand\noexpand, this is because we + % don't want \the to be expanded in the \parsermacbody as it uses an + % \xdef . + \expandafter\edef\tempa + {\noexpand\noexpand\noexpand\the\toks\the\paramno}% + \advance\paramno by 1\relax + \fi\next} + % These two commands read recursive and nonrecursive macro bodies. % (They're different since rec and nonrec macros end differently.) +% +\catcode `\@\texiatcatcode \long\def\parsemacbody#1@end macro% {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% \long\def\parsermacbody#1@end rmacro% {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% +\catcode `\@=11\relax + +\let\endargs@\relax +\let\nil@\relax +\def\nilm@{\nil@}% +\long\def\nillm@{\nil@}% + +% This macro is expanded during the Texinfo macro expansion, not during its +% definition. It gets all the arguments values and assigns them to macros +% macarg.ARGNAME +% +% #1 is the macro name +% #2 is the list of argument names +% #3 is the list of argument values +\def\getargvals@#1#2#3{% + \def\macargdeflist@{}% + \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion. + \def\paramlist{#2,\nil@}% + \def\macroname{#1}% + \begingroup + \macroargctxt + \def\argvaluelist{#3,\nil@}% + \def\@tempa{#3}% + \ifx\@tempa\empty + \setemptyargvalues@ + \else + \getargvals@@ + \fi +} -% This defines the macro itself. There are six cases: recursive and -% nonrecursive macros of zero, one, and many arguments. +% +\def\getargvals@@{% + \ifx\paramlist\nilm@ + % Some sanity check needed here that \argvaluelist is also empty. + \ifx\argvaluelist\nillm@ + \else + \errhelp = \EMsimple + \errmessage{Too many arguments in macro `\macroname'!}% + \fi + \let\next\macargexpandinbody@ + \else + \ifx\argvaluelist\nillm@ + % No more arguments values passed to macro. Set remaining named-arg + % macros to empty. + \let\next\setemptyargvalues@ + \else + % pop current arg name into \@tempb + \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}% + \expandafter\@tempa\expandafter{\paramlist}% + % pop current argument value into \@tempc + \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}% + \expandafter\@tempa\expandafter{\argvaluelist}% + % Here \@tempb is the current arg name and \@tempc is the current arg value. + % First place the new argument macro definition into \@tempd + \expandafter\macname\expandafter{\@tempc}% + \expandafter\let\csname macarg.\@tempb\endcsname\relax + \expandafter\def\expandafter\@tempe\expandafter{% + \csname macarg.\@tempb\endcsname}% + \edef\@tempd{\long\def\@tempe{\the\macname}}% + \push@\@tempd\macargdeflist@ + \let\next\getargvals@@ + \fi + \fi + \next +} + +\def\push@#1#2{% + \expandafter\expandafter\expandafter\def + \expandafter\expandafter\expandafter#2% + \expandafter\expandafter\expandafter{% + \expandafter#1#2}% +} + +% Replace arguments by their values in the macro body, and place the result +% in macro \@tempa +\def\macvalstoargs@{% + % To do this we use the property that token registers that are \the'ed + % within an \edef expand only once. So we are going to place all argument + % values into respective token registers. + % + % First we save the token context, and initialize argument numbering. + \begingroup + \paramno0\relax + % Then, for each argument number #N, we place the corresponding argument + % value into a new token list register \toks#N + \expandafter\putargsintokens@\saveparamlist@,;,% + % Then, we expand the body so that argument are replaced by their + % values. The trick for values not to be expanded themselves is that they + % are within tokens and that tokens expand only once in an \edef . + \edef\@tempc{\csname mac.\macroname .body\endcsname}% + % Now we restore the token stack pointer to free the token list registers + % which we have used, but we make sure that expanded body is saved after + % group. + \expandafter + \endgroup + \expandafter\def\expandafter\@tempa\expandafter{\@tempc}% + } + +\def\macargexpandinbody@{% + %% Define the named-macro outside of this group and then close this group. + \expandafter + \endgroup + \macargdeflist@ + % First the replace in body the macro arguments by their values, the result + % is in \@tempa . + \macvalstoargs@ + % Then we point at the \norecurse or \gobble (for recursive) macro value + % with \@tempb . + \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname + % Depending on whether it is recursive or not, we need some tailing + % \egroup . + \ifx\@tempb\gobble + \let\@tempc\relax + \else + \let\@tempc\egroup + \fi + % And now we do the real job: + \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}% + \@tempd +} + +\def\putargsintokens@#1,{% + \if#1;\let\next\relax + \else + \let\next\putargsintokens@ + % First we allocate the new token list register, and give it a temporary + % alias \@tempb . + \toksdef\@tempb\the\paramno + % Then we place the argument value into that token list register. + \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname + \expandafter\@tempb\expandafter{\@tempa}% + \advance\paramno by 1\relax + \fi + \next +} + +% Save the token stack pointer into macro #1 +\def\texisavetoksstackpoint#1{\edef#1{\the\@cclvi}} +% Restore the token stack pointer from number in macro #1 +\def\texirestoretoksstackpoint#1{\expandafter\mathchardef\expandafter\@cclvi#1\relax} +% newtoks that can be used non \outer . +\def\texinonouternewtoks{\alloc@ 5\toks \toksdef \@cclvi} + +% Tailing missing arguments are set to empty +\def\setemptyargvalues@{% + \ifx\paramlist\nilm@ + \let\next\macargexpandinbody@ + \else + \expandafter\setemptyargvaluesparser@\paramlist\endargs@ + \let\next\setemptyargvalues@ + \fi + \next +} + +\def\setemptyargvaluesparser@#1,#2\endargs@{% + \expandafter\def\expandafter\@tempa\expandafter{% + \expandafter\def\csname macarg.#1\endcsname{}}% + \push@\@tempa\macargdeflist@ + \def\paramlist{#2}% +} + +% #1 is the element target macro +% #2 is the list macro +% #3,#4\endargs@ is the list value +\def\pop@#1#2#3,#4\endargs@{% + \def#1{#3}% + \def#2{#4}% +} +\long\def\longpop@#1#2#3,#4\endargs@{% + \long\def#1{#3}% + \long\def#2{#4}% +} + +% This defines a Texinfo @macro. There are eight cases: recursive and +% nonrecursive macros of zero, one, up to nine, and many arguments. % Much magic with \expandafter here. % \xdef is used so that macro definitions will survive the file % they're defined in; @include reads the file inside a group. +% \def\defmacro{% \let\hash=##% convert placeholders to macro parameter chars \ifrecursive @@ -7040,17 +7692,25 @@ end \expandafter\noexpand\csname\the\macname xxx\endcsname}% \expandafter\xdef\csname\the\macname xxx\endcsname##1{% \egroup\noexpand\scanmacro{\temp}}% - \else % many - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \noexpand\csname\the\macname xx\endcsname}% - \expandafter\xdef\csname\the\macname xx\endcsname##1{% - \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% - \expandafter\expandafter - \expandafter\xdef - \expandafter\expandafter - \csname\the\macname xxx\endcsname - \paramlist{\egroup\noexpand\scanmacro{\temp}}% + \else + \ifnum\paramno<10\relax % at most 9 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{\egroup\noexpand\scanmacro{\temp}}% + \else % 10 or more + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\getargvals@{\the\macname}{\argl}% + }% + \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp + \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble + \fi \fi \else \ifcase\paramno @@ -7067,29 +7727,40 @@ end \egroup \noexpand\norecurse{\the\macname}% \noexpand\scanmacro{\temp}\egroup}% - \else % many - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \expandafter\noexpand\csname\the\macname xx\endcsname}% - \expandafter\xdef\csname\the\macname xx\endcsname##1{% - \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% - \expandafter\expandafter - \expandafter\xdef - \expandafter\expandafter - \csname\the\macname xxx\endcsname - \paramlist{% - \egroup - \noexpand\norecurse{\the\macname}% - \noexpand\scanmacro{\temp}\egroup}% + \else % at most 9 + \ifnum\paramno<10\relax + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \expandafter\noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{% + \egroup + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \else % 10 or more: + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\getargvals@{\the\macname}{\argl}% + }% + \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp + \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse + \fi \fi \fi} +\catcode `\@\texiatcatcode\relax + \def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}} % \braceorline decides whether the next nonwhitespace character is a % {. If so it reads up to the closing }, if not, it reads the whole % line. Whatever was read is then fed to the next control sequence -% as an argument (by \parsebrace or \parsearg) +% as an argument (by \parsebrace or \parsearg). +% \def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx} \def\braceorlinexxx{% \ifx\nchar\bgroup\else @@ -7099,7 +7770,8 @@ end % @alias. % We need some trickery to remove the optional spaces around the equal -% sign. Just make them active and then expand them all to nothing. +% sign. Make them active and then expand them all to nothing. +% \def\alias{\parseargusing\obeyspaces\aliasxxx} \def\aliasxxx #1{\aliasyyy#1\relax} \def\aliasyyy #1=#2\relax{% @@ -7120,7 +7792,8 @@ end % @inforef is relatively simple. \def\inforef #1{\inforefzzz #1,,,,**} -\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, +\def\inforefzzz #1,#2,#3,#4**{% + \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, node \samp{\ignorespaces#1{}}} % @node's only job in TeX is to define \lastnode, which is used in @@ -7181,11 +7854,32 @@ end \toks0 = \expandafter{\lastsection}% \immediate \writexrdef{title}{\the\toks0 }% \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. - \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, during \shipout + \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout }% \fi } +% @xrefautosectiontitle on|off says whether @section(ing) names are used +% automatically in xrefs, if the third arg is not explicitly specified. +% This was provided as a "secret" @set xref-automatic-section-title +% variable, now it's official. +% +\parseargdef\xrefautomaticsectiontitle{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETxref-automatic-section-title\endcsname + = \empty + \else\ifx\temp\offword + \expandafter\let\csname SETxref-automatic-section-title\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @xrefautomaticsectiontitle value `\temp', + must be on|off}% + \fi\fi +} + +% % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is % the node name, #2 the name of the Info cross-reference, #3 the printed % node name, #4 the name of the Info file, #5 the name of the printed @@ -7194,26 +7888,41 @@ end \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]} \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} \def\ref#1{\xrefX[#1,,,,,,,]} +% +\newbox\toprefbox +\newbox\printedrefnamebox +\newbox\infofilenamebox +\newbox\printedmanualbox +% \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup \unsepspaces - \def\printedmanual{\ignorespaces #5}% + % + % Get args without leading/trailing spaces. \def\printedrefname{\ignorespaces #3}% - \setbox1=\hbox{\printedmanual\unskip}% - \setbox0=\hbox{\printedrefname\unskip}% - \ifdim \wd0 = 0pt + \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}% + % + \def\infofilename{\ignorespaces #4}% + \setbox\infofilenamebox = \hbox{\infofilename\unskip}% + % + \def\printedmanual{\ignorespaces #5}% + \setbox\printedmanualbox = \hbox{\printedmanual\unskip}% + % + % If the printed reference name (arg #3) was not explicitly given in + % the @xref, figure out what we want to use. + \ifdim \wd\printedrefnamebox = 0pt % No printed node name was explicitly given. - \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax - % Use the node name inside the square brackets. + \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax + % Not auto section-title: use node name inside the square brackets. \def\printedrefname{\ignorespaces #1}% \else - % Use the actual chapter/section title appear inside - % the square brackets. Use the real section title if we have it. - \ifdim \wd1 > 0pt - % It is in another manual, so we don't have it. + % Auto section-title: use chapter/section title inside + % the square brackets if we have it. + \ifdim \wd\printedmanualbox > 0pt + % It is in another manual, so we don't have it; use node name. \def\printedrefname{\ignorespaces #1}% \else \ifhavexrefs - % We know the real title if we have the xref values. + % We (should) know the real title if we have the xref values. \def\printedrefname{\refx{#1-title}{}}% \else % Otherwise just copy the Info node name. @@ -7227,13 +7936,20 @@ end \ifpdf {\indexnofonts \turnoffactive + \makevalueexpandable % This expands tokens, so do it after making catcode changes, so _ - % etc. don't get their TeX definitions. + % etc. don't get their TeX definitions. This ignores all spaces in + % #4, including (wrongly) those in the middle of the filename. \getfilename{#4}% % - % See comments at \activebackslashdouble. - {\activebackslashdouble \xdef\pdfxrefdest{#1}% - \backslashparens\pdfxrefdest}% + % This (wrongly) does not take account of leading or trailing + % spaces in #1, which should be ignored. + \edef\pdfxrefdest{#1}% + \ifx\pdfxrefdest\empty + \def\pdfxrefdest{Top}% no empty targets + \else + \txiescapepdf\pdfxrefdest % escape PDF special chars + \fi % \leavevmode \startlink attr{/Border [0 0 0]}% @@ -7260,29 +7976,42 @@ end \iffloat\Xthisreftitle % If the user specified the print name (third arg) to the ref, % print it instead of our usual "Figure 1.2". - \ifdim\wd0 = 0pt + \ifdim\wd\printedrefnamebox = 0pt \refx{#1-snt}{}% \else \printedrefname \fi % - % if the user also gave the printed manual name (fifth arg), append + % If the user also gave the printed manual name (fifth arg), append % "in MANUALNAME". - \ifdim \wd1 > 0pt + \ifdim \wd\printedmanualbox > 0pt \space \putwordin{} \cite{\printedmanual}% \fi \else % node/anchor (non-float) references. + % + % If we use \unhbox to print the node names, TeX does not insert + % empty discretionaries after hyphens, which means that it will not + % find a line break at a hyphen in a node names. Since some manuals + % are best written with fairly long node names, containing hyphens, + % this is a loss. Therefore, we give the text of the node name + % again, so it is as if TeX is seeing it for the first time. + % + \ifdim \wd\printedmanualbox > 0pt + % Cross-manual reference with a printed manual name. + % + \crossmanualxref{\cite{\printedmanual\unskip}}% + % + \else\ifdim \wd\infofilenamebox > 0pt + % Cross-manual reference with only an info filename (arg 4), no + % printed manual name (arg 5). This is essentially the same as + % the case above; we output the filename, since we have nothing else. + % + \crossmanualxref{\code{\infofilename\unskip}}% % - % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not - % insert empty discretionaries after hyphens, which means that it will - % not find a line break at a hyphen in a node names. Since some manuals - % are best written with fairly long node names, containing hyphens, this - % is a loss. Therefore, we give the text of the node name again, so it - % is as if TeX is seeing it for the first time. - \ifdim \wd1 > 0pt - \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}% \else + % Reference within this manual. + % % _ (for example) has to be the character _ for the purposes of the % control sequence corresponding to the node, but it has to expand % into the usual \leavevmode...\vrule stuff for purposes of @@ -7294,7 +8023,7 @@ end \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi }% - % output the `[mynode]' via a macro so it can be overridden. + % output the `[mynode]' via the macro below so it can be overridden. \xrefprintnodename\printedrefname % % But we always want a comma and a space: @@ -7302,11 +8031,37 @@ end % % output the `page 3'. \turnoffactive \putwordpage\tie\refx{#1-pg}{}% - \fi + \fi\fi \fi \endlink \endgroup} +% Output a cross-manual xref to #1. Used just above (twice). +% +% Only include the text "Section ``foo'' in" if the foo is neither +% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply +% "see The Foo Manual", the idea being to refer to the whole manual. +% +% But, this being TeX, we can't easily compare our node name against the +% string "Top" while ignoring the possible spaces before and after in +% the input. By adding the arbitrary 7sp below, we make it much less +% likely that a real node name would have the same width as "Top" (e.g., +% in a monospaced font). Hopefully it will never happen in practice. +% +% For the same basic reason, we retypeset the "Top" at every +% reference, since the current font is indeterminate. +% +\def\crossmanualxref#1{% + \setbox\toprefbox = \hbox{Top\kern7sp}% + \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}% + \ifdim \wd2 > 7sp % nonempty? + \ifdim \wd2 = \wd\toprefbox \else % same as Top? + \putwordSection{} ``\printedrefname'' \putwordin{}\space + \fi + \fi + #1% +} + % This macro is called from \xrefX for the `[nodename]' part of xref % output. It's a separate macro only so it can be changed more easily, % since square brackets don't work well in some documents. Particularly @@ -7357,7 +8112,8 @@ end \angleleft un\-de\-fined\angleright \iflinks \ifhavexrefs - \message{\linenumber Undefined cross reference `#1'.}% + {\toks0 = {#1}% avoid expansion of possibly-complex value + \message{\linenumber Undefined cross reference `\the\toks0'.}}% \else \ifwarnedxrefs\else \global\warnedxrefstrue @@ -7521,7 +8277,7 @@ end % space to prevent strange expansion errors.) \def\supereject{\par\penalty -20000\footnoteno =0 } -% @footnotestyle is meaningful for info output only. +% @footnotestyle is meaningful for Info output only. \let\footnotestyle=\comment {\catcode `\@=11 @@ -7584,6 +8340,8 @@ end % expands into a box, it must come within the paragraph, lest it % provide a place where TeX can split the footnote. \footstrut + % + % Invoke rest of plain TeX footnote routine. \futurelet\next\fo@t } }%end \catcode `\@=11 @@ -7671,7 +8429,7 @@ end it from ftp://tug.org/tex/epsf.tex.} % \def\image#1{% - \ifx\epsfbox\undefined + \ifx\epsfbox\thisisundefined \ifwarnednoepsf \else \errhelp = \noepsfhelp \errmessage{epsf.tex not found, images will be ignored}% @@ -7687,7 +8445,7 @@ end % #2 is (optional) width, #3 is (optional) height. % #4 is (ignored optional) html alt text. % #5 is (ignored optional) extension. -% #6 is just the usual extra ignored arg for parsing this stuff. +% #6 is just the usual extra ignored arg for parsing stuff. \newif\ifimagevmode \def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup \catcode`\^^M = 5 % in case we're inside an example @@ -7695,6 +8453,13 @@ end % If the image is by itself, center it. \ifvmode \imagevmodetrue + \else \ifx\centersub\centerV + % for @center @image, we need a vbox so we can have our vertical space + \imagevmodetrue + \vbox\bgroup % vbox has better behavior than vtop herev + \fi\fi + % + \ifimagevmode \nobreak\medskip % Usually we'll have text after the image which will insert % \parskip glue, so insert it here too to equalize the space @@ -7704,9 +8469,13 @@ end \fi % % Leave vertical mode so that indentation from an enclosing - % environment such as @quotation is respected. On the other hand, if - % it's at the top level, we don't want the normal paragraph indentation. - \noindent + % environment such as @quotation is respected. + % However, if we're at the top level, we don't want the + % normal paragraph indentation. + % On the other hand, if we are in the case of @center @image, we don't + % want to start a paragraph, which will create a hsize-width box and + % eradicate the centering. + \ifx\centersub\centerV\else \noindent \fi % % Output the image. \ifpdf @@ -7718,7 +8487,10 @@ end \epsfbox{#1.eps}% \fi % - \ifimagevmode \medskip \fi % space after the standalone image + \ifimagevmode + \medskip % space after a standalone image + \fi + \ifx\centersub\centerV \egroup \fi \endgroup} @@ -8136,7 +8908,7 @@ directory should work if nowhere else does.} % % Latin1 (ISO-8859-1) character definitions. \def\latonechardefs{% - \gdef^^a0{~} + \gdef^^a0{\tie} \gdef^^a1{\exclamdown} \gdef^^a2{\missingcharmsg{CENT SIGN}} \gdef^^a3{{\pounds}} @@ -8166,7 +8938,7 @@ directory should work if nowhere else does.} \gdef^^b9{$^1$} \gdef^^ba{\ordm} % - \gdef^^bb{\guilletright} + \gdef^^bb{\guillemetright} \gdef^^bc{$1\over4$} \gdef^^bd{$1\over2$} \gdef^^be{$3\over4$} @@ -8258,7 +9030,7 @@ directory should work if nowhere else does.} % Latin2 (ISO-8859-2) character definitions. \def\lattwochardefs{% - \gdef^^a0{~} + \gdef^^a0{\tie} \gdef^^a1{\ogonek{A}} \gdef^^a2{\u{}} \gdef^^a3{\L} @@ -8339,8 +9111,8 @@ directory should work if nowhere else does.} \gdef^^ea{\ogonek{e}} \gdef^^eb{\"e} \gdef^^ec{\v e} - \gdef^^ed{\'\i} - \gdef^^ee{\^\i} + \gdef^^ed{\'{\dotless{i}}} + \gdef^^ee{\^{\dotless{i}}} \gdef^^ef{\v d} % \gdef^^f0{\dh} @@ -8431,7 +9203,7 @@ directory should work if nowhere else does.} \gdef\DeclareUnicodeCharacter#1#2{% \countUTFz = "#1\relax - \wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% + %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% \begingroup \parseXMLCharref \def\UTFviiiTwoOctets##1##2{% @@ -8899,8 +9671,8 @@ directory should work if nowhere else does.} % Prevent underfull vbox error messages. \vbadness = 10000 -% Don't be so finicky about underfull hboxes, either. -\hbadness = 2000 +% Don't be very finicky about underfull hboxes, either. +\hbadness = 6666 % Following George Bush, get rid of widows and orphans. \widowpenalty=10000 @@ -9107,28 +9879,21 @@ directory should work if nowhere else does.} \message{and turning on texinfo input format.} +\def^^L{\par} % remove \outer, so ^L can appear in an @comment + % DEL is a comment character, in case @c does not suffice. \catcode`\^^? = 14 % Define macros to output various characters with catcode for normal text. -\catcode`\"=\other -\catcode`\~=\other -\catcode`\^=\other -\catcode`\_=\other -\catcode`\|=\other -\catcode`\<=\other -\catcode`\>=\other -\catcode`\+=\other -\catcode`\$=\other -\def\normaldoublequote{"} -\def\normaltilde{~} -\def\normalcaret{^} -\def\normalunderscore{_} -\def\normalverticalbar{|} -\def\normalless{<} -\def\normalgreater{>} -\def\normalplus{+} -\def\normaldollar{$}%$ font-lock fix +\catcode`\"=\other \def\normaldoublequote{"} +\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix +\catcode`\+=\other \def\normalplus{+} +\catcode`\<=\other \def\normalless{<} +\catcode`\>=\other \def\normalgreater{>} +\catcode`\^=\other \def\normalcaret{^} +\catcode`\_=\other \def\normalunderscore{_} +\catcode`\|=\other \def\normalverticalbar{|} +\catcode`\~=\other \def\normaltilde{~} % This macro is used to make a character print one way in \tt % (where it can probably be output as-is), and another way in other fonts, @@ -9206,34 +9971,48 @@ directory should work if nowhere else does.} % In texinfo, backslash is an active character; it prints the backslash % in fixed width font. -\catcode`\\=\active -@def@normalbackslash{{@tt@backslashcurfont}} +\catcode`\\=\active % @ for escape char from now on. + +% The story here is that in math mode, the \char of \backslashcurfont +% ends up printing the roman \ from the math symbol font (because \char +% in math mode uses the \mathcode, and plain.tex sets +% \mathcode`\\="026E). It seems better for @backslashchar{} to always +% print a typewriter backslash, hence we use an explicit \mathchar, +% which is the decimal equivalent of "715c (class 7, e.g., use \fam; +% ignored family value; char position "5C). We can't use " for the +% usual hex value because it has already been made active. +@def@normalbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}} +@let@backslashchar = @normalbackslash % @backslashchar{} is for user documents. + % On startup, @fixbackslash assigns: % @let \ = @normalbackslash - % \rawbackslash defines an active \ to do \backslashcurfont. % \otherbackslash defines an active \ to be a literal `\' character with -% catcode other. +% catcode other. We switch back and forth between these. @gdef@rawbackslash{@let\=@backslashcurfont} @gdef@otherbackslash{@let\=@realbackslash} % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of -% the literal character `\'. -% -@def@normalturnoffactive{% - @let\=@normalbackslash - @let"=@normaldoublequote - @let~=@normaltilde - @let^=@normalcaret - @let_=@normalunderscore - @let|=@normalverticalbar - @let<=@normalless - @let>=@normalgreater - @let+=@normalplus - @let$=@normaldollar %$ font-lock fix - @markupsetuplqdefault - @markupsetuprqdefault - @unsepspaces +% the literal character `\'. Also revert - to its normal character, in +% case the active - from code has slipped in. +% +{@catcode`- = @active + @gdef@normalturnoffactive{% + @let-=@normaldash + @let"=@normaldoublequote + @let$=@normaldollar %$ font-lock fix + @let+=@normalplus + @let<=@normalless + @let>=@normalgreater + @let\=@normalbackslash + @let^=@normalcaret + @let_=@normalunderscore + @let|=@normalverticalbar + @let~=@normaltilde + @markupsetuplqdefault + @markupsetuprqdefault + @unsepspaces + } } % Make _ and + \other characters, temporarily. @@ -9262,10 +10041,19 @@ directory should work if nowhere else does.} % Say @foo, not \foo, in error messages. @escapechar = `@@ +% These (along with & and #) are made active for url-breaking, so need +% active definitions as the normal characters. +@def@normaldot{.} +@def@normalquest{?} +@def@normalslash{/} + % These look ok in all fonts, so just make them not special. -@catcode`@& = @other -@catcode`@# = @other -@catcode`@% = @other +% @hashchar{} gets its own user-level command, because of #line. +@catcode`@& = @other @def@normalamp{&} +@catcode`@# = @other @def@normalhash{#} +@catcode`@% = @other @def@normalpercent{%} + +@let @hashchar = @normalhash @c Finally, make ` and ' active, so that txicodequoteundirected and @c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}. If we |