# # $Id: README.Drivers,v 1.4 2001/03/09 13:08:11 ltoetsch Exp $ # How to write new display drivers for lcd4linux If you plan to write a new display driver for lcd4linux, you should follow this guidelines: * use Skeleton.c as a start point. You might also have a look at Text.c * create a new sourcefile .c and add it to the bottom of Makefile.am * add an entry to configure.in * there's no need for a .h * create one (or more) unique display names (your driver will be selected by this name in the 'Display'-line of lcd4linux.conf). * include "display.h" in your driver, to get the LCD structure and various BAR_ definitions * include "cfg.h" if you need to access settings in the config file. * create a LCD table at the bottom of your driver, and fill it with the appropriate values. Take care that you specify the correct bar capabilities of your display or driver: BAR_L: horizontal bars headed left BAR_R: horizontal bars headed right BAR_H2: driver supports horizontal dual-bars BAR_U: vertical bars bottom-up BAR_D: vertical bars top-down BAR_V2: driver supports vertical dual-bars * edit display.c and create a reference to your LCD table: external LCD YourDriver[]; * extend the FAMILY table in display.c with your driver: FAMILY Driver[] = { { "Skeleton", Skeleton }, { "MatrixOrbital", MatrixOrbital }, { "YourFamily", YourDriver }, { "" } }; * write the correspondig init(), clear(), put(), bar(), quit() and flush()-functions. There's no need to use a framebuffer and display its contents with the flush()- call (as in MatrixOrbital.c), you can directly write to the display in the put()- and bar()-functions, and use an empty flush()-function. But if you have a limited number of user-defined characters, and therefore you have to do some sort of 'character reduction' or similar stuff, you will have to use a framebuffer and the flush()-call. er
blob: 8e6bb1c0c18197c9bb0d7af81952a75c5baf25e5 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
# Author: Noah Friedman <friedman@prep.ai.mit.edu>
# Created: 1993-05-16
# Public domain

# $Id: mkinstalldirs,v 1.2 2003/02/27 07:43:11 reinelt Exp $

errstatus=0

for file
do
   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
   shift

   pathcomp=
   for d
   do
     pathcomp="$pathcomp$d"
     case "$pathcomp" in
       -* ) pathcomp=./$pathcomp ;;
     esac

     if test ! -d "$pathcomp"; then
        echo "mkdir $pathcomp"

        mkdir "$pathcomp" || lasterr=$?

        if test ! -d "$pathcomp"; then
  	  errstatus=$lasterr
        fi
     fi

     pathcomp="$pathcomp/"
   done
done

exit $errstatus

# mkinstalldirs ends here