From 181cec4348da40331b3e8ab365732c025ec149b2 Mon Sep 17 00:00:00 2001 From: Reinhard Tartler Date: Wed, 27 Apr 2011 19:24:15 +0200 Subject: Import upstream version 0.11.0~svn1143 --- drv_Noritake.c | 389 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 389 insertions(+) create mode 100644 drv_Noritake.c (limited to 'drv_Noritake.c') diff --git a/drv_Noritake.c b/drv_Noritake.c new file mode 100644 index 0000000..011ff35 --- /dev/null +++ b/drv_Noritake.c @@ -0,0 +1,389 @@ +/* $Id: drv_Noritake.c 771 2007-02-25 12:27:26Z michael $ + * $URL: https://ssl.bulix.org/svn/lcd4linux/trunk/drv_Noritake.c $ + * + * Driver for a Noritake GU128x32-311 graphical display. + * + * Copyright (C) 2005 Julien Aube + * Copyright (C) 2005 The LCD4Linux Team + * + * This file is part of LCD4Linux. + * + * LCD4Linux is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * LCD4Linux is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * *** Noritake Itron GU128x32-311 *** + * A 128x32 VFD (Vacuum Fluorescent Display). + * It is driver by a Hitachi microcontroller, with a specific + * firmware. + * The datasheet can be easily found on the internet by searching for the + * the name of the display, it's a PDF file that describe the timing, and + * the protocol to communicate with the Hitachi microcontroller. + * + * The display support 2 modes (that can be mutiplexed), one text mode + * thanks to an integrated character generator, and provide 4 lines of + * 21 caracters. + * There is also a graphical mode that can be used to switch on or off + * each one if the 128x32 pixels. (monochrome). + * + * The protocol include the possibility to clear the display memory quickly, + * change the luminosity, swich the display on or off (without affecting the + * content of the memory) and finally change the "page" or the caracter + * generator. Two pages are available in the ROM, all the characters are + * listed in the documentation. + * + * This driver support only the character mode at the moment. + * A future release will support the graphical mode as an option. + * + * This driver is released under the GPL. + */ + +/* + * + * exported fuctions: + * + * struct DRIVER drv_Noritake + * + */ + +#include "config.h" + +#include +#include +#include + +#include "debug.h" +#include "cfg.h" +#include "qprintf.h" +#include "plugin.h" +#include "widget.h" +#include "widget_text.h" +#include "widget_icon.h" +#include "widget_bar.h" +#include "drv.h" +#include "udelay.h" +#include "drv_generic_text.h" +#include "drv_generic_parport.h" + + +static char Name[] = "Noritake"; + +typedef struct { + int type; + char *name; + int rows; + int cols; + int xres; + int yrex; + int goto_cost; + int protocol; +} MODEL; + +static int Model, Protocol; +static MODEL Models[] = { + {0x01, "GU311", 4, 21, 6, 8, 5, 1}, + {0x02, "GU311_Graphic", 4, 21, 6, 8, 6, 1}, + {0xff, "Unknown", -1, -1, -1, -1, -1, -1} +}; + +static unsigned char SIGNAL_CS; /* Chip select, OUTPUT, negative logic, pport AUTOFEED */ +static unsigned char SIGNAL_WR; /* Write OUTPUT, negative logic, pport STOBE */ +static unsigned char SIGNAL_RESET; /* Reset, OUTPUT, negative logic, pport INIT */ +static unsigned char SIGNAL_BLANK; /* Blank, OUTPUT , negative logic, pport SELECT-IN */ + +#if 0 +static unsigned char SIGNAL_BUSY; /* Busy, INPUT , positive logic, pport BUSY, not used */ +static unsigned char SIGNAL_FRP; /* Frame Pulse, INPUT , positive logic, pport ACK, not used */ +#endif + +void (*drv_Noritake_clear) (void); + +/* Data port is positive logic */ + + +/****************************************/ +/*** hardware dependant functions ***/ +/****************************************/ + +/* Low-level parport driving functions */ + +/* This function was used to pool the BUSY line on the parallel port, which +can be linked to the BUSY line on the display. But since it works +with a timed wait, this function is not necessary, and is kept just in case.*/ +#if 0 +static void drv_GU311_wait_busy(void) +{ + char c; + + c = drv_generic_parport_status(); + while ((c & SIGNAL_BUSY) == 0) { + ndelay(200); /* Wait 100ns before next consultation of BUSY line + if the first one was not successful */ + c = drv_generic_parport_status(); + } +} +#endif + + +static void drv_GU311_send_char(char c) +{ +#if 0 + /* Disabled because all the cables does not have the busy line linked. */ + drv_GU311_wait_busy(); /* ensuite the display is ready to take the command */ +#endif + drv_generic_parport_data(c); + ndelay(30); /* delay to ensure data line stabilisation on long cables */ + drv_generic_parport_control(SIGNAL_WR, 0); /* write line to enable */ + ndelay(150); /* data hold time */ + drv_generic_parport_control(SIGNAL_WR, 0xff); /* write line to disable */ + ndelay(75); /* From spec : minimum time before next command */ +} + +static void drv_GU311_send_string(char *str, int size) +{ + int i; + for (i = 0; i < size; i++) + drv_GU311_send_char(str[i]); + +} + +/* Command-string elaboration functions */ +static void drv_GU311_make_text_string(const int row, const int col, const char *data, int len) +{ + static char cmd[96] = { 0x01, 'C', 0, 0, 'S', 0 }; + unsigned char start_addr; + + /* Cols are 0x00..0x15, on 4 lines. */ + start_addr = (0x16 * row) + col; + if (start_addr > 0x57) + return; + if (len > 0x57) + return; + + cmd[2] = start_addr; + cmd[3] = len; + + memcpy(cmd + 5, data, len); + + drv_GU311_send_string(cmd, len + 5); + +} + +/* API functions */ + +static void drv_GU311_clear(void) +{ + static char clear_cmd[] = { 0x01, 'O', 'P' }; + drv_GU311_send_string(clear_cmd, sizeof(clear_cmd)); + ndelay(500); /* Delay for execution - this command is the longuest */ +} + + +static void drv_GU311_write(const int row, const int col, const char *data, int len) +{ + drv_GU311_make_text_string(row, col, data, len); +} + + +static void drv_GU311_reset(void) +{ + drv_generic_parport_control(SIGNAL_RESET, 0); /* initiate reset */ + ndelay(1000); /* reset hold time 1ms */ + drv_generic_parport_control(SIGNAL_RESET, 0xff); + ndelay(200000); /* reset ready time 200ms */ + +} + + +static int drv_GU311_start(const char *section) +{ + char cmd[3] = { 0x01, 'O' }; + + /* Parallel port opening and association */ + if (drv_generic_parport_open(section, Name) < 0) + return -1; + if ((SIGNAL_CS = drv_generic_parport_wire_ctrl("CS", "AUTOFD")) == 0xff) + return -1; + if ((SIGNAL_WR = drv_generic_parport_wire_ctrl("WR", "STROBE")) == 0xff) + return -1; + if ((SIGNAL_RESET = drv_generic_parport_wire_ctrl("RESET", "INIT")) == 0xff) + return -1; + if ((SIGNAL_BLANK = drv_generic_parport_wire_ctrl("BLANK", "SLCTIN")) == 0xff) + return -1; + /* SIGNAL_BUSY=PARPORT_STATUS_BUSY; *//* Not currently needed */ + /* SIGNAL_FRP=PARPORT_STATUS_ACK; *//* Not currently needed */ + + /* Signals configuration */ + drv_generic_parport_direction(0); /* parallel port in output mode */ + drv_generic_parport_control(SIGNAL_CS | SIGNAL_WR | SIGNAL_RESET | SIGNAL_BLANK, 0xff); + /* All lines to "deactivate", -> 1 level on the wire */ + drv_generic_parport_control(SIGNAL_CS, 0); /* CS to 0 all the time, write done by WR */ + drv_GU311_reset(); + + /* Ready for commands from now on. */ + + /* Display configuration */ + cmd[2] = '0'; + drv_GU311_send_string(cmd, sizeof(cmd)); /* Select char. page 0 */ + cmd[2] = 'Q'; + drv_GU311_send_string(cmd, sizeof(cmd)); /* Select 'Quick Mode' */ + cmd[2] = 'a'; + drv_GU311_send_string(cmd, sizeof(cmd)); /* Brightness at 100% */ + cmd[2] = 'T'; + drv_GU311_send_string(cmd, sizeof(cmd)); /* Ensure display ON */ + + drv_Noritake_clear(); + return 0; +} + + + +static int drv_Noritake_start(const char *section) +{ + char *model = 0; + int i; + model = cfg_get(section, "Model", NULL); + if (model != NULL && *model != '\0') { + for (i = 0; Models[i].type != 0xff; i++) { + if (strcasecmp(Models[i].name, model) == 0) + break; + } + if (Models[i].type == 0xff) { + error("%s: %s.Model '%s' is unknown from %s", Name, section, model, cfg_source()); + return -1; + } + Model = i; + info("%s: using model '%s'", Name, Models[Model].name); + } else { + error("%s: no '%s.Model' entry from %s", Name, section, cfg_source()); + return -1; + } + + DROWS = Models[Model].rows; + DCOLS = Models[Model].cols; + XRES = Models[Model].xres; + YRES = Models[Model].xres; + GOTO_COST = Models[Model].goto_cost; + Protocol = Models[Model].protocol; + /* display preferences */ + CHARS = 0; /* number of user-defineable characters */ + CHAR0 = 0; /* ASCII of first user-defineable char */ + + + + /* real worker functions */ + drv_Noritake_clear = drv_GU311_clear; + if (Models[Model].type == 0x01) { + drv_generic_text_real_write = drv_GU311_write; + } else { + error("%s: Unsupported display. Currently supported are : GU311.", Name); + return -1; + } + return drv_GU311_start(section); +} + + +/****************************************/ +/*** plugins ***/ +/****************************************/ + +/* none */ + + +/****************************************/ +/*** widget callbacks ***/ +/****************************************/ + + +/* using drv_generic_text_draw(W) */ + + +/****************************************/ +/*** exported functions ***/ +/****************************************/ + + +/* list models */ +int drv_Noritake_list(void) +{ + printf("GU311 GU311_Graphic"); + return 0; +} + + +/* initialize driver & display */ +int drv_Noritake_init(const char *section, const int quiet) +{ + WIDGET_CLASS wc; + int ret; + + info("%s: %s", Name, "$Rev: 771 $"); + + /* start display */ + if ((ret = drv_Noritake_start(section)) != 0) + return ret; + + /* initialize generic text driver */ + if ((ret = drv_generic_text_init(section, Name)) != 0) + return ret; + + /* register text widget */ + wc = Widget_Text; + wc.draw = drv_generic_text_draw; + widget_register(&wc); + + /* register plugins */ + /* none */ + + if (!quiet) { + char buffer[40]; + qprintf(buffer, sizeof(buffer), "%s %dx%d", Name, DCOLS, DROWS); + if (drv_generic_text_greet(buffer, NULL)) { + sleep(3); + drv_Noritake_clear(); + } + } + + return 0; +} + + +/* close driver & display */ +int drv_Noritake_quit(const int quiet) +{ + + info("%s: shutting down.", Name); + + /* clear display */ + drv_Noritake_clear(); + + /* say goodbye... */ + if (!quiet) { + drv_generic_text_greet("goodbye!", NULL); + } + + drv_generic_parport_close(); + drv_generic_text_quit(); + return (0); +} + + +DRIVER drv_Noritake = { + .name = Name, + .list = drv_Noritake_list, + .init = drv_Noritake_init, + .quit = drv_Noritake_quit, +}; -- cgit v1.2.3