diff options
Diffstat (limited to '')
| -rwxr-xr-x | install-sh | 496 |
1 files changed, 212 insertions, 284 deletions
@@ -1,38 +1,19 @@ #!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2005-05-14.22 - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. # -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. +# install - install a program, script, or datafile +# This comes from X11R5 (mit/util/scripts/install.sh). # +# Copyright 1991 by the Massachusetts Institute of Technology # -# FSF changes to this file are in the public domain. +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of M.I.T. not be used in advertising or +# publicity pertaining to distribution of the software without specific, +# written prior permission. M.I.T. makes no representations about the +# suitability of this software for any purpose. It is provided "as is" +# without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it @@ -42,11 +23,13 @@ scriptversion=2005-05-14.22 # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. + # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" + # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" @@ -58,266 +41,211 @@ stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" +transformbasename="" +transform_arg="" +instcmd="$mvprog" chmodcmd="$chmodprog 0755" -chowncmd= -chgrpcmd= -stripcmd= +chowncmd="" +chgrpcmd="" +stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" -src= -dst= -dir_arg= -dstarg= -no_target_directory= - -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: --c (ignored) --d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. ---help display this help and exit. ---version display version info and exit. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG -" - -while test -n "$1"; do - case $1 in - -c) shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - --help) echo "$usage"; exit $?;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t) dstarg=$2 - shift - shift - continue;; - - -T) no_target_directory=true - shift - continue;; - - --version) echo "$0 $scriptversion"; exit $?;; - - *) # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - test -n "$dir_arg$dstarg" && break - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dstarg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" - shift # fnord - fi - shift # arg - dstarg=$arg - done - break;; - esac +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac done -if test -z "$1"; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +else + true fi -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src ;; - esac - - if test -n "$dir_arg"; then - dst=$src - src= - - if test -d "$dst"; then - mkdircmd=: - chmodcmd= - else - mkdircmd=$mkdirprog - fi - else - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dstarg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dstarg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst ;; - esac +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + chmodcmd="" + else + instcmd=mkdir + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + true + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + true + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + true + fi +fi - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 - exit 1 - fi - dst=$dst/`basename "$src"` - fi - fi - - # This sed command emulates the dirname command. - dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` - - # Make sure that the destination directory exists. - - # Skip lots of stat calls in the usual case. - if test ! -d "$dstdir"; then - defaultIFS=' - ' - IFS="${IFS-$defaultIFS}" - - oIFS=$IFS - # Some sh's can't handle IFS=/ for some reason. - IFS='%' - set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` - shift - IFS=$oIFS - - pathcomp= - - while test $# -ne 0 ; do - pathcomp=$pathcomp$1 - shift - if test ! -d "$pathcomp"; then - $mkdirprog "$pathcomp" - # mkdir can fail with a `File exist' error in case several - # install-sh are creating the directory concurrently. This - # is OK. - test -d "$pathcomp" || exit - fi - pathcomp=$pathcomp/ - done - fi - - if test -n "$dir_arg"; then - $doit $mkdircmd "$dst" \ - && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } - - else - dstfile=`basename "$dst"` - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - trap '(exit $?); exit' 1 2 13 15 - - # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dstdir/$dstfile"; then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ - || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ - || { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit 1 - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" - } - } - fi || { (exit 1); exit 1; } +## this sed command emulates the dirname command +dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' +' +IFS="${IFS-${defaultIFS}}" + +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + true + fi + + pathcomp="${pathcomp}/" done +fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + true + fi + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + +# Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + +fi && + -# The final little trick to "correctly" pass the exit status to the exit trap. -{ - (exit 0); exit 0 -} - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: +exit 0 |