aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--INSTALL323
-rw-r--r--aclocal.m4707
-rw-r--r--config.h.in8
-rw-r--r--[-rwxr-xr-x]depcomp172
-rwxr-xr-xinstall-sh673
-rwxr-xr-xmissing104
-rwxr-xr-xmkinstalldirs169
7 files changed, 610 insertions, 1546 deletions
diff --git a/INSTALL b/INSTALL
index 7d1c323..d00c1bb 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,80 +1,52 @@
-Installation Instructions
-*************************
+$Id: INSTALL 730 2007-01-14 13:50:28Z michael $
+$URL: https://ssl.bulix.org/svn/lcd4linux/branches/0.10.1/INSTALL $
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-
- Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved. This file is offered as-is,
-without warranty of any kind.
Basic Installation
==================
- Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package. Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below. The lack of an optional feature in a given package is not
-necessarily a bug. More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
+ These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
+be considered for the next release. If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+ The file `configure.in' is used to create `configure' by a program
+called `autoconf'. You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
- The simplest way to compile this package is:
+The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
- the package, generally using the just-built uninstalled binaries.
+ the package.
4. Type `make install' to install the programs and any data files and
- documentation. When installing into a prefix owned by root, it is
- recommended that the package be configured and built as a regular
- user, and only the `make install' phase executed with root
- privileges.
-
- 5. Optionally, type `make installcheck' to repeat any self-tests, but
- this time using the binaries in their final installed location.
- This target does not install anything. Running this target as a
- regular user, particularly if the prior `make install' required
- root privileges, verifies that the installation completed
- correctly.
-
- 6. You can remove the program binaries and object files from the
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
@@ -83,119 +55,62 @@ of `autoconf'.
all sorts of other programs in order to regenerate files that came
with the distribution.
- 7. Often, you can also type `make uninstall' to remove the installed
- files again. In practice, not all packages have tested that
- uninstallation works correctly, even though it is required by the
- GNU Coding Standards.
-
- 8. Some packages, particularly those that use Automake, provide `make
- distcheck', which can by used by developers to test that all other
- targets like `make install' and `make uninstall' work correctly.
- This target is generally not run by end users.
-
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+the `configure' script does not know about. You can give `configure'
+initial values for variables by setting them in the environment. Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+ CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
- *Note Defining Variables::, for more details.
+Or on systems that have the `env' program, you can do it like this:
+ env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'. This
-is known as a "VPATH" build.
-
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
- On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor. Like
-this:
-
- ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CPP="gcc -E" CXXCPP="g++ -E"
+source code in the directory that `configure' is in and in `..'.
- This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
+ If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory. After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
Installation Names
==================
- By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
+options like `--bindir=PATH' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them. In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
- The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
- The first method involves providing an override variable for each
-affected directory. For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'. Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated. The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
- The second method involves providing the `DESTDIR' variable. For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names. The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters. On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
+you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+Optional Features
+=================
+
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
@@ -208,75 +123,25 @@ find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
- Some packages offer the ability to configure how verbose the
-execution of `make' will be. For these packages, running `./configure
---enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
---disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
- On HP-UX, the default C compiler is not ANSI C compatible. If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
- ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
- On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file. The option `-nodtk' can be used as
-a workaround. If GNU CC is not installed, it is therefore recommended
-to try
-
- ./configure CC="cc"
-
-and if that doesn't work, try
-
- ./configure CC="cc -nodtk"
-
- On Solaris, don't put `/usr/ucb' early in your `PATH'. This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
- On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'. It is recommended to use the following options:
-
- ./configure --prefix=/boot/common
-
Specifying the System Type
==========================
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
+ There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on. Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
CPU-COMPANY-SYSTEM
-where SYSTEM can have one of these forms:
-
- OS
- KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
+See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
+need to know the host type.
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
+ If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
Sharing Defaults
================
@@ -289,55 +154,19 @@ default values for variables like `CC', `cache_file', and `prefix'.
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
-Defining Variables
+Operation Controls
==================
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
-
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
`configure' recognizes the following options to control how it
operates.
-`--help'
-`-h'
- Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
- Print a summary of the options unique to this package's
- `configure', and exit. The `short' variant lists options used
- only in the top level, while the `recursive' variant lists options
- also present in any nested packages.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
+ Use and save the results of the tests in FILE instead of
+ `./config.cache'. Set FILE to `/dev/null' to disable caching, for
+ debugging `configure'.
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
+`--help'
+ Print a summary of the options to `configure', and exit.
`--quiet'
`--silent'
@@ -350,16 +179,8 @@ operates.
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
-`--prefix=DIR'
- Use DIR as the installation prefix. *note Installation Names::
- for more details, including other options available for fine-tuning
- the installation locations.
-
-`--no-create'
-`-n'
- Run the configure checks, but stop before creating any output
- files.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
+`--version'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+`configure' also accepts some other, not widely useful, options.
diff --git a/aclocal.m4 b/aclocal.m4
index 90a9420..1b32358 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+# 2005 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -11,16 +11,8 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],,
-[m4_warning([this file was generated for autoconf 2.65.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-# iconv.m4 serial AM6 (gettext-0.17)
-dnl Copyright (C) 2000-2002, 2007 Free Software Foundation, Inc.
+# iconv.m4 serial AM4 (gettext-0.11.3)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
@@ -42,7 +34,6 @@ AC_DEFUN([AM_ICONV_LINK],
[
dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
dnl those with the standalone portable GNU libiconv installed).
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
dnl accordingly.
@@ -55,7 +46,7 @@ AC_DEFUN([AM_ICONV_LINK],
am_save_CPPFLAGS="$CPPFLAGS"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
- AC_CACHE_CHECK([for iconv], am_cv_func_iconv, [
+ AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
AC_TRY_LINK([#include <stdlib.h>
@@ -78,85 +69,7 @@ AC_DEFUN([AM_ICONV_LINK],
fi
])
if test "$am_cv_func_iconv" = yes; then
- AC_CACHE_CHECK([for working iconv], am_cv_func_iconv_works, [
- dnl This tests against bugs in AIX 5.1 and HP-UX 11.11.
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- AC_TRY_RUN([
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- return 1;
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- return 1;
- return 0;
-}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no],
- [case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac])
- LIBS="$am_save_LIBS"
- ])
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
- AC_DEFINE(HAVE_ICONV, 1,
- [Define if you have the iconv() function and it works.])
+ AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
fi
if test "$am_cv_lib_iconv" = yes; then
AC_MSG_CHECKING([how to link with libiconv])
@@ -311,22 +224,20 @@ test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_LIB_PROG_LD_GNU
])
-# lib-link.m4 serial 13 (gettext-0.17)
-dnl Copyright (C) 2001-2007 Free Software Foundation, Inc.
+# lib-link.m4 serial 9 (gettext-0.16)
+dnl Copyright (C) 2001-2006 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl From Bruno Haible.
-AC_PREREQ(2.54)
+AC_PREREQ(2.50)
dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
dnl augments the CPPFLAGS variable.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
AC_DEFUN([AC_LIB_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
@@ -339,16 +250,13 @@ AC_DEFUN([AC_LIB_LINKFLAGS],
ac_cv_lib[]Name[]_libs="$LIB[]NAME"
ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
- ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
])
LIB[]NAME="$ac_cv_lib[]Name[]_libs"
LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
- LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
dnl results of this search when this library appears as a dependency.
HAVE_LIB[]NAME=yes
@@ -364,8 +272,6 @@ dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
@@ -402,23 +308,17 @@ AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
CPPFLAGS="$ac_save_CPPFLAGS"
LIB[]NAME=
LTLIB[]NAME=
- LIB[]NAME[]_PREFIX=
fi
AC_SUBST([HAVE_LIB]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
undefine([Name])
undefine([NAME])
])
dnl Determine the platform dependent parameters needed to use rpath:
-dnl acl_libext,
-dnl acl_shlibext,
-dnl acl_hardcode_libdir_flag_spec,
-dnl acl_hardcode_libdir_separator,
-dnl acl_hardcode_direct,
-dnl acl_hardcode_minus_L.
+dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
+dnl hardcode_direct, hardcode_minus_L.
AC_DEFUN([AC_LIB_RPATH],
[
dnl Tell automake >= 1.10 to complain if config.rpath is missing.
@@ -435,14 +335,12 @@ AC_DEFUN([AC_LIB_RPATH],
acl_cv_rpath=done
])
wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
dnl Determine whether the user wants rpath handling at all.
AC_ARG_ENABLE(rpath,
[ --disable-rpath do not hardcode runtime library paths],
@@ -452,24 +350,20 @@ AC_DEFUN([AC_LIB_RPATH],
dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
-dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
[
AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- dnl Autoconf >= 2.61 supports dots in --with options.
- define([N_A_M_E],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit([$1],[.],[_])],[$1])])
dnl By default, look in $includedir and $libdir.
use_additional=yes
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
- AC_LIB_ARG_WITH([lib]N_A_M_E[-prefix],
-[ --with-lib]N_A_M_E[-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
- --without-lib]N_A_M_E[-prefix don't search for lib$1 in includedir and libdir],
+ AC_LIB_ARG_WITH([lib$1-prefix],
+[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
+ --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
[
if test "X$withval" = "Xno"; then
use_additional=no
@@ -490,7 +384,6 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
LIB[]NAME=
LTLIB[]NAME=
INC[]NAME=
- LIB[]NAME[]_PREFIX=
rpathdirs=
ltrpathdirs=
names_already_handled=
@@ -530,53 +423,27 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
found_la=
found_so=
found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
if test $use_additional = yes; then
- dir="$additional_libdir"
- dnl The same code as in the loop below:
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
+ if test -n "$shlibext" \
+ && { test -f "$additional_libdir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$additional_libdir/lib$name.dll.a"; }; }; then
+ found_dir="$additional_libdir"
+ if test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_so="$additional_libdir/lib$name.$shlibext"
else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
+ found_so="$additional_libdir/lib$name.dll.a"
fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
fi
fi
fi
@@ -586,44 +453,26 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
+ if test -n "$shlibext" \
+ && { test -f "$dir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$dir/lib$name.dll.a"; }; }; then
+ found_dir="$dir"
+ if test -f "$dir/lib$name.$shlibext"; then
+ found_so="$dir/lib$name.$shlibext"
else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
+ found_so="$dir/lib$name.dll.a"
fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
fi
fi
;;
@@ -659,12 +508,12 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
ltrpathdirs="$ltrpathdirs $found_dir"
fi
dnl The hardcoding into $LIBNAME is system dependent.
- if test "$acl_hardcode_direct" = yes; then
+ if test "$hardcode_direct" = yes; then
dnl Using DIR/libNAME.so during linking hardcodes DIR into the
dnl resulting binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
@@ -695,13 +544,13 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
if test -z "$haveit"; then
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
fi
- if test "$acl_hardcode_minus_L" != no; then
+ if test "$hardcode_minus_L" != no; then
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
- dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
+ dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
dnl here, because this doesn't fit in flags passed to the
dnl compiler. So give up. No hardcoding. This affects only
dnl very old systems.
@@ -728,7 +577,6 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
case "$found_dir" in
*/$acl_libdirstem | */$acl_libdirstem/)
basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- LIB[]NAME[]_PREFIX="$basedir"
additional_includedir="$basedir/include"
;;
esac
@@ -890,18 +738,18 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
done
done
if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
+ if test -n "$hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user must
dnl pass all path elements in one option. We can arrange that for a
dnl single library, but not when more than one $LIBNAMEs are used.
alldirs=
for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
done
- dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
+ dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
acl_save_libdir="$libdir"
libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
else
@@ -909,7 +757,7 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
for found_dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
done
@@ -958,7 +806,7 @@ AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
$1=
if test "$enable_rpath" != no; then
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode directories into the resulting
dnl binary.
rpathdirs=
@@ -992,16 +840,16 @@ AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
done
else
dnl The linker is used for linking directly.
- if test -n "$acl_hardcode_libdir_separator"; then
+ if test -n "$hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user
dnl must pass all path elements in one option.
alldirs=
for dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$dir"
done
acl_save_libdir="$libdir"
libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
$1="$flag"
else
@@ -1009,7 +857,7 @@ AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
for dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
$1="${$1}${$1:+ }$flag"
done
@@ -1207,7 +1055,7 @@ AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
fi
])
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1217,31 +1065,14 @@ AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.11.1], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.1])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+ [AM_AUTOMAKE_VERSION([1.9.6])])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
@@ -1298,14 +1129,14 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 9
+# serial 7
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
@@ -1314,11 +1145,8 @@ AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
if $2; then
$1_TRUE=
$1_FALSE='#'
@@ -1332,14 +1160,15 @@ AC_CONFIG_COMMANDS_PRE(
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 10
+# serial 8
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
@@ -1367,7 +1196,6 @@ AC_REQUIRE([AM_DEP_TRACK])dnl
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
@@ -1396,16 +1224,6 @@ AC_CACHE_CHECK([dependency style of $depcc],
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
-
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
@@ -1423,17 +1241,7 @@ AC_CACHE_CHECK([dependency style of $depcc],
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
@@ -1443,23 +1251,18 @@ AC_CACHE_CHECK([dependency style of $depcc],
break
fi
;;
- msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
none) break ;;
esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
@@ -1510,74 +1313,61 @@ if test "x$enable_dependency_tracking" != xno; then
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([AMDEPBACKSLASH])
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-#serial 5
+#serial 3
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
done
-}
+done
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
@@ -1636,14 +1426,14 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 16
+# serial 12
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
@@ -1660,20 +1450,16 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
+[AC_PREREQ([2.58])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
# test whether we have cygpath
@@ -1693,9 +1479,6 @@ m4_ifval([$2],
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
@@ -1711,8 +1494,8 @@ AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
@@ -1720,37 +1503,20 @@ AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
])
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
@@ -1761,19 +1527,18 @@ m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
-_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
- $_am_arg | $_am_arg:* )
+ $1 | $1:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1784,14 +1549,7 @@ echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_co
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
@@ -1817,13 +1575,13 @@ AC_SUBST([am__leading_dot])])
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 3
# AM_MAKE_INCLUDE()
# -----------------
@@ -1832,7 +1590,7 @@ AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
- @echo this is the am__doit target
+ @echo done
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
@@ -1842,24 +1600,24 @@ am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
@@ -1869,14 +1627,14 @@ rm -f confinc confmf
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 6
+# serial 4
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
@@ -1892,15 +1650,7 @@ AC_SUBST($1)])
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
@@ -1910,7 +1660,7 @@ else
fi
])
-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1918,33 +1668,70 @@ fi
# AM_PROG_MKDIR_P
# ---------------
-# Check for `mkdir -p'.
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+#
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake. There are at least two reasons why we must not
+# use `-m 0755':
+# - it causes special bits like SGID to be ignored,
+# - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out. Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+AC_SUBST([mkdir_p])])
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 3
# _AM_MANGLE_OPTION(NAME)
# -----------------------
@@ -1961,7 +1748,7 @@ AC_DEFUN([_AM_SET_OPTION],
# ----------------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
@@ -1971,14 +1758,14 @@ AC_DEFUN([_AM_IF_OPTION],
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
+# serial 4
# AM_SANITY_CHECK
# ---------------
@@ -1987,29 +1774,16 @@ AC_DEFUN([AM_SANITY_CHECK],
# Just in case
sleep 1
echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[[\\\"\#\$\&\'\`$am_lf]]*)
- AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
-esac
-
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
+ set X `ls -t $srcdir/configure conftest.file`
fi
rm -f conftest.file
if test "$[*]" != "X $srcdir/configure conftest.file" \
@@ -2059,28 +1833,9 @@ dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
diff --git a/config.h.in b/config.h.in
index 65169b4..76abc47 100644
--- a/config.h.in
+++ b/config.h.in
@@ -40,7 +40,7 @@
/* Define to 1 if you have the `gettimeofday' function. */
#undef HAVE_GETTIMEOFDAY
-/* Define if you have the iconv() function and it works. */
+/* Define if you have the iconv() function. */
#undef HAVE_ICONV
/* Define to 1 if you have the <inttypes.h> header file. */
@@ -103,9 +103,6 @@
/* Define to 1 if you have the `putenv' function. */
#undef HAVE_PUTENV
-/* If available, contains the Python version number currently in use. */
-#undef HAVE_PYTHON
-
/* Define to 1 if you have the `regcomp' function. */
#undef HAVE_REGCOMP
@@ -269,9 +266,6 @@
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
/* Define to the version of this package. */
#undef PACKAGE_VERSION
diff --git a/depcomp b/depcomp
index df8eea7..04701da 100755..100644
--- a/depcomp
+++ b/depcomp
@@ -1,10 +1,9 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2005-07-09.11
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
-# Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -17,7 +16,9 @@ scriptversion=2009-04-28.21; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -85,34 +86,12 @@ if test "$depmode" = dashXmstdout; then
depmode=dashmstdout
fi
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u="sed s,\\\\\\\\,/,g"
- depmode=msvisualcpp
-fi
-
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am. Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
- for arg
- do
- case $arg in
- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
- *) set fnord "$@" "$arg" ;;
- esac
- shift # fnord
- shift # $arg
- done
- "$@"
+ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
@@ -199,14 +178,14 @@ sgi)
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
-' ' ' >> "$depfile"
- echo >> "$depfile"
+' ' ' >> $depfile
+ echo >> $depfile
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
+ >> $depfile
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
@@ -222,39 +201,34 @@ aix)
# current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$base.u
- tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$dir$base.u
- tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
+
if test $stat -eq 0; then :
else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ rm -f "$tmpdepfile"
exit $stat
fi
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
@@ -302,51 +276,6 @@ icc)
rm -f "$tmpdepfile"
;;
-hp2)
- # The "hp" stanza above does not work with aCC (C++) and HP's ia64
- # compilers, which have integrated preprocessors. The correct option
- # to use with these is +Maked; it writes dependencies to a file named
- # 'foo.d', which lands next to the object file, wherever that
- # happens to be.
- # Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir.libs/$base.d
- "$@" -Wc,+Maked
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- "$@" +Maked
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add `dependent.h:' lines.
- sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile" "$tmpdepfile2"
- ;;
-
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
@@ -359,13 +288,13 @@ tru64)
if test "$libtool" = yes; then
# With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
+ # static library. This mecanism is used in libtool 1.4 series to
# handle both shared and static libraries in a single compilation.
# With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
#
# With libtool 1.5 this exception was removed, and libtool now
# generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
+ # compilations output dependencies in in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
@@ -416,7 +345,7 @@ dashmstdout)
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
@@ -467,39 +396,32 @@ makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
- cleared=no eat=no
- for arg
- do
+ cleared=no
+ for arg in "$@"; do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
- if test $eat = yes; then
- eat=no
- continue
- fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
- -arch)
- eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
- obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
@@ -519,7 +441,7 @@ cpp)
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
+ while test $1 != '--mode=compile'; do
shift
done
shift
@@ -557,27 +479,13 @@ cpp)
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
"$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
IFS=" "
for arg
do
case "$arg" in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
@@ -590,23 +498,16 @@ msvisualcpp)
;;
esac
done
- "$@" -E 2>/dev/null |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
-msvcmsys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
none)
exec "$@"
;;
@@ -625,6 +526,5 @@ exit 0
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
+# time-stamp-end: "$"
# End:
diff --git a/install-sh b/install-sh
index 6781b98..c122ef9 100755
--- a/install-sh
+++ b/install-sh
@@ -1,520 +1,251 @@
#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2009-04-28.21; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
#
+# Copyright 1991 by the Massachusetts Institute of Technology
#
-# FSF changes to this file are in the public domain.
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission. M.I.T. makes no representations about the
+# suitability of this software for any purpose. It is provided "as is"
+# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch.
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
-nl='
-'
-IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd="$cpprog"
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd="$stripprog"
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ # this colon is to work around a 386BSD /bin/sh bug
+ :
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+done
+
+if [ x"$src" = x ]
+then
+ echo "install: no input file specified"
+ exit 1
else
- doit_exec=$doit
+ true
fi
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
-posix_mkdir=
+if [ x"$dir_arg" != x ]; then
+ dst=$src
+ src=""
+
+ if [ -d $dst ]; then
+ instcmd=:
+ chmodcmd=""
+ else
+ instcmd=mkdir
+ fi
+else
-# Desired mode of installed file.
-mode=0755
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
+ if [ -f $src -o -d $src ]
+ then
+ true
+ else
+ echo "install: $src does not exist"
+ exit 1
+ fi
+
+ if [ x"$dst" = x ]
+ then
+ echo "install: no destination specified"
+ exit 1
+ else
+ true
+ fi
-src=
-dst=
-dir_arg=
-dst_arg=
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
-copy_on_change=false
-no_target_directory=
+ if [ -d $dst ]
+ then
+ dst="$dst"/`basename $src`
+ else
+ true
+ fi
+fi
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
+# Make sure that the destination directory exists.
+# this part is taken from Noah Friedman's mkinstalldirs script
-Options:
- --help display this help and exit.
- --version display version info and exit.
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+'
+IFS="${IFS-${defaultIFS}}"
- -c (ignored)
- -C install only if different (preserve the last data modification time)
- -d create directories instead of installing files.
- -g GROUP $chgrpprog installed files to GROUP.
- -m MODE $chmodprog installed files to MODE.
- -o USER $chownprog installed files to USER.
- -s $stripprog installed files.
- -t DIRECTORY install into DIRECTORY.
- -T report an error if DSTFILE is a directory.
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
- RMPROG STRIPPROG
-"
+pathcomp=''
-while test $# -ne 0; do
- case $1 in
- -c) ;;
+while [ $# -ne 0 ] ; do
+ pathcomp="${pathcomp}${1}"
+ shift
- -C) copy_on_change=true;;
+ if [ ! -d "${pathcomp}" ] ;
+ then
+ $mkdirprog "${pathcomp}"
+ else
+ true
+ fi
- -d) dir_arg=true;;
+ pathcomp="${pathcomp}/"
+done
+fi
- -g) chgrpcmd="$chgrpprog $2"
- shift;;
+if [ x"$dir_arg" != x ]
+then
+ $doit $instcmd $dst &&
- --help) echo "$usage"; exit $?;;
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
- -m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+# If we're going to rename the final executable, determine the name now.
- -o) chowncmd="$chownprog $2"
- shift;;
+ if [ x"$transformarg" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ dstfile=`basename $dst $transformbasename |
+ sed $transformarg`$transformbasename
+ fi
- -s) stripcmd=$stripprog;;
+# don't allow the sed command to completely eliminate the filename
- -t) dst_arg=$2
- shift;;
+ if [ x"$dstfile" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ true
+ fi
- -T) no_target_directory=true;;
+# Make a temp file name in the proper directory.
- --version) echo "$0 $scriptversion"; exit $?;;
+ dsttmp=$dstdir/#inst.$$#
- --) shift
- break;;
+# Move or copy the file name to the temp name
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ $doit $instcmd $src $dsttmp &&
- *) break;;
- esac
- shift
-done
+ trap "rm -f ${dsttmp}" 0 &&
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dst_arg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dst_arg"
- shift # fnord
- fi
- shift # arg
- dst_arg=$arg
- done
-fi
+# and set any options; do chmod last to preserve setuid bits
-if test $# -eq 0; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call `install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
+# If any of these fail, we abort the whole thing. If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
-if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
-
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-for src
-do
- # Protect names starting with `-'.
- case $src in
- -*) src=./$src;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
-
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dst_arg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
-
- dst=$dst_arg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst;;
- esac
+# Now rename the file to the real destination.
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
- fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
- fi
- fi
-
- obsolete_mkdir_used=false
-
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
+ $doit $rmcmd -f $dstdir/$dstfile &&
+ $doit $mvcmd $dsttmp $dstdir/$dstfile
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
+fi &&
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
-
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix='/';;
- -*) prefix='./';;
- *) prefix='';;
- esac
-
- eval "$initialize_posix_glob"
-
- oIFS=$IFS
- IFS=/
- $posix_glob set -f
- set fnord $dstdir
- shift
- $posix_glob set +f
- IFS=$oIFS
-
- prefixes=
-
- for d
- do
- test -z "$d" && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
-
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
- fi
- fi
- fi
-
- if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
- else
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
- # Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
- { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
- { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # If -C, don't bother to copy if it wouldn't change the file.
- if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
- set X $old && old=:$2:$4:$5:$6 &&
- set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
- test "$old" = "$new" &&
- $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
- then
- rm -f "$dsttmp"
- else
- # Rename the file to the real destination.
- $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
- {
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- fi || exit 1
-
- trap '' 0
- fi
-done
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+exit 0
diff --git a/missing b/missing
index 28055d2..894e786 100755
--- a/missing
+++ b/missing
@@ -1,10 +1,10 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2005-06-08.21
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
@@ -18,7 +18,9 @@ scriptversion=2009-04-28.21; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -31,8 +33,6 @@ if test $# -eq 0; then
fi
run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
@@ -44,7 +44,7 @@ fi
msg="missing on your system"
-case $1 in
+case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
@@ -77,7 +77,6 @@ Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
@@ -87,9 +86,6 @@ Supported PROGRAM values:
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
@@ -107,22 +103,15 @@ Send bug reports to <bug-automake@gnu.org>."
esac
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
+# the program).
+case "$1" in
+ lex|yacc)
# Not GNU programs, they don't have --version.
;;
- tar*)
+ tar)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
@@ -146,7 +135,7 @@ esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case $program in
+case "$1" in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
@@ -156,7 +145,7 @@ WARNING: \`$1' is $msg. You should only need it if
touch aclocal.m4
;;
- autoconf*)
+ autoconf)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
@@ -165,7 +154,7 @@ WARNING: \`$1' is $msg. You should only need it if
touch configure
;;
- autoheader*)
+ autoheader)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
@@ -175,7 +164,7 @@ WARNING: \`$1' is $msg. You should only need it if
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case $f in
+ case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
@@ -195,7 +184,7 @@ WARNING: \`$1' is $msg. You should only need it if
while read f; do touch "$f"; done
;;
- autom4te*)
+ autom4te)
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
@@ -203,8 +192,8 @@ WARNING: \`$1' is needed, but is $msg.
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
@@ -218,78 +207,80 @@ WARNING: \`$1' is needed, but is $msg.
fi
;;
- bison*|yacc*)
+ bison|yacc)
echo 1>&2 "\
WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
+ if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
- case $LASTARG in
+ case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if test ! -f y.tab.h; then
+ if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
- if test ! -f y.tab.c; then
+ if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
- lex*|flex*)
+ lex|flex)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if test $# -ne 1; then
+ if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
- case $LASTARG in
+ case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if test ! -f lex.yy.c; then
+ if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
- help2man*)
+ help2man)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
- exit $?
+ exit 1
fi
;;
- makeinfo*)
+ makeinfo)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -298,17 +289,11 @@ WARNING: \`$1' is $msg. You should only need it if
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
@@ -318,7 +303,7 @@ WARNING: \`$1' is $msg. You should only need it if
touch $file
;;
- tar*)
+ tar)
shift
# We have already tried tar in the generic part.
@@ -332,13 +317,13 @@ WARNING: \`$1' is $msg. You should only need it if
fi
firstarg="$1"
if shift; then
- case $firstarg in
+ case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case $firstarg in
+ case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
@@ -371,6 +356,5 @@ exit 0
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
+# time-stamp-end: "$"
# End:
diff --git a/mkinstalldirs b/mkinstalldirs
index 4191a45..c7dde14 100755
--- a/mkinstalldirs
+++ b/mkinstalldirs
@@ -1,162 +1,41 @@
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
-
-scriptversion=2009-04-28.21; # UTC
-
-# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
# Created: 1993-05-16
-# Public domain.
-#
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-nl='
-'
-IFS=" "" $nl"
-errstatus=0
-dirmode=
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
-
-Create each directory DIR (with mode MODE, if specified), including all
-leading file name components.
-
-Report bugs to <bug-automake@gnu.org>."
-
-# process command line arguments
-while test $# -gt 0 ; do
- case $1 in
- -h | --help | --h*) # -h for help
- echo "$usage"
- exit $?
- ;;
- -m) # -m PERM arg
- shift
- test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
- dirmode=$1
- shift
- ;;
- --version)
- echo "$0 $scriptversion"
- exit $?
- ;;
- --) # stop option processing
- shift
- break
- ;;
- -*) # unknown option
- echo "$usage" 1>&2
- exit 1
- ;;
- *) # first non-opt arg
- break
- ;;
- esac
-done
-
-for file
-do
- if test -d "$file"; then
- shift
- else
- break
- fi
-done
+# Public domain
-case $# in
- 0) exit 0 ;;
-esac
+# $Id: mkinstalldirs 731 2007-01-14 13:51:41Z michael $
+# $URL: https://ssl.bulix.org/svn/lcd4linux/branches/0.10.1/mkinstalldirs $
-# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
-# mkdir -p a/c at the same time, both will detect that a is missing,
-# one will create a, then the other will try to create a and die with
-# a "File exists" error. This is a problem when calling mkinstalldirs
-# from a parallel make. We use --version in the probe to restrict
-# ourselves to GNU mkdir, which is thread-safe.
-case $dirmode in
- '')
- if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- echo "mkdir -p -- $*"
- exec mkdir -p -- "$@"
- else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- test -d ./-p && rmdir ./-p
- test -d ./--version && rmdir ./--version
- fi
- ;;
- *)
- if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
- test ! -d ./--version; then
- echo "mkdir -m $dirmode -p -- $*"
- exec mkdir -m "$dirmode" -p -- "$@"
- else
- # Clean up after NextStep and OpenStep mkdir.
- for d in ./-m ./-p ./--version "./$dirmode";
- do
- test -d $d && rmdir $d
- done
- fi
- ;;
-esac
+errstatus=0
for file
do
- case $file in
- /*) pathcomp=/ ;;
- *) pathcomp= ;;
- esac
- oIFS=$IFS
- IFS=/
- set fnord $file
- shift
- IFS=$oIFS
-
- for d
- do
- test "x$d" = x && continue
-
- pathcomp=$pathcomp$d
- case $pathcomp in
- -*) pathcomp=./$pathcomp ;;
- esac
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case "$pathcomp" in
+ -* ) pathcomp=./$pathcomp ;;
+ esac
- mkdir "$pathcomp" || lasterr=$?
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- else
- if test ! -z "$dirmode"; then
- echo "chmod $dirmode $pathcomp"
- lasterr=
- chmod "$dirmode" "$pathcomp" || lasterr=$?
+ mkdir "$pathcomp" || lasterr=$?
- if test ! -z "$lasterr"; then
- errstatus=$lasterr
- fi
- fi
- fi
- fi
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ fi
+ fi
- pathcomp=$pathcomp/
- done
+ pathcomp="$pathcomp/"
+ done
done
exit $errstatus
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+# mkinstalldirs ends here