aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--README97
1 files changed, 50 insertions, 47 deletions
diff --git a/README b/README
index 7bae392..2b9b709 100644
--- a/README
+++ b/README
@@ -1,5 +1,5 @@
#
-# $Id: README,v 1.20 2001/03/16 16:40:17 ltoetsch Exp $
+# $Id: README,v 1.21 2001/05/27 17:32:35 reinelt Exp $
#
This is the README file for lcd4linux
@@ -138,7 +138,6 @@ Data-specific options:
displays a '!' instead of a blank if the current load average
exceeds this value.
load bars are scaled by this value (load=overload gives 100%)
- fifo: path to fifo for communication with isdnlog (not yet implemented)
sensor1: path to the 1st temperature file
(e.g. /proc/sys/dev/sensors/w83781d-isa-0290/temp1)
it is important that you use the isa sensors, because the i2c
@@ -179,6 +178,8 @@ Data-specific options:
Note: user and pass may not contain a '/' with above syntax, I hope
that's ok.
+ SetiDir: directory where seti@home stores its data files
+
Driver-specific options:
@@ -215,51 +216,53 @@ Display options:
Tokens:
- 'o', operating system name ('Linux')
- 'v', operating system release ('2.0.38')
- 'p', processor ('i686')
- 'r', total amount of memory installed (MB)
- 'mt', total memory from /proc/meminfo (kB)
- 'mu', used memory (kB)
- 'mf', free memory (kB)
- 'ms', shared memory (kB)
- 'mb', buffers (kB)
- 'mc', page cache (kB)
- 'ma', application memory (kB) = used - buffer - cache
- 'l1', load average for the past 1 minute
- 'l2', load average for the past 5 minutes
- 'l3', load average for the past 15 minutes
- 'L', '!' if load > overload (from config)
- 'cu', percentage of CPU in user mode
- 'cn', percentage of CPU in niced tasks
- 'cs', percentage of CPU in system mode
- 'cb', percentage of CPU busy (=100-idle)
- 'ci', percentage of CPU idle
- 'dr', disk blocks read
- 'dw', disk blocks written
- 'dt', disk blocks total (read+write)
- 'dm', disk blocks max (read, write)
- 'nr', network bytes received
- 'nw', network bytes transmitted
- 'nt', network bytes total (receive+transmit)
- 'nm', network bytes max (receive, transmit)
- 'ii', ISDN bytes received
- 'io', ISDN bytes sent
- 'it', ISDN bytes total (received+send)
- 'im', ISDN bytes max (received, send)
- 'ic', ISDN connected (0=offline, 1=online)
- 'ti', PPP bytes received
- 'to', PPP bytes sent
- 'tt', PPP bytes total (received+send)
- 'tm', PPP bytes max (received, send)
- 's1', temperature of sensor 1
- 's2', temperature of sensor 2 (up to s9)
- 'bp', battery percentage (APM by now)
- 'bs', battery status ('=' = online, '+' = charging, '-' discharging)
- 'bd', battery duration in s{econds}, m{ins}, h{ours} or d{ays}
- 'e*', mails in mailbox 1-9, total mail
- 'u*', mails in mailbox 1-9, unseen mail
- 'x*', output of command 1-9
+ 'o' operating system name ('Linux')
+ 'v' operating system release ('2.0.38')
+ 'p' processor ('i686')
+ 'r' total amount of memory installed (MB)
+ 'mt' total memory from /proc/meminfo (kB)
+ 'mu' used memory (kB)
+ 'mf' free memory (kB)
+ 'ms' shared memory (kB)
+ 'mb' buffers (kB)
+ 'mc' page cache (kB)
+ 'ma' application memory (kB) = used - buffer - cache
+ 'l1' load average for the past 1 minute
+ 'l2' load average for the past 5 minutes
+ 'l3' load average for the past 15 minutes
+ 'L' '!' if load > overload (from config)
+ 'cu' percentage of CPU in user mode
+ 'cn' percentage of CPU in niced tasks
+ 'cs' percentage of CPU in system mode
+ 'cb' percentage of CPU busy (=100-idle)
+ 'ci' percentage of CPU idle
+ 'dr' disk blocks read
+ 'dw' disk blocks written
+ 'dt' disk blocks total (read+write)
+ 'dm' disk blocks max (read, write)
+ 'nr' network bytes received
+ 'nw' network bytes transmitted
+ 'nt' network bytes total (receive+transmit)
+ 'nm' network bytes max (receive, transmit)
+ 'ii' ISDN bytes received
+ 'io' ISDN bytes sent
+ 'it' ISDN bytes total (received+send)
+ 'im' ISDN bytes max (received, send)
+ 'ic' ISDN connected (0=offline, 1=online)
+ 'ti' PPP bytes received
+ 'to' PPP bytes sent
+ 'tt' PPP bytes total (received+send)
+ 'tm' PPP bytes max (received, send)
+ 's1' temperature of sensor 1
+ 's2' temperature of sensor 2 (up to s9)
+ 'bp' battery percentage (APM by now)
+ 'bs' battery status ('=' = online, '+' = charging, '-' discharging)
+ 'bd' battery duration in s{econds}, m{ins}, h{ours} or d{ays}
+ 'hc' seti@home % completed
+ 'ht' seti@home time spent on workunit
+ 'e*' mails in mailbox 1-9, total mail
+ 'u*' mails in mailbox 1-9, unseen mail
+ 'x*' output of command 1-9
Please have a look at lcd4linux.conf.sample, where you can find examples
of all options and there usage.