diff options
Diffstat (limited to '')
| -rw-r--r-- | INSTALL | 172 | ||||
| -rw-r--r-- | Makefile.in | 20 | ||||
| -rw-r--r-- | aclocal.m4 | 5 | ||||
| -rw-r--r-- | config.h.in | 7 | ||||
| -rwxr-xr-x | configure | 8255 | ||||
| -rwxr-xr-x[-rw-r--r--] | depcomp | 0 | ||||
| -rwxr-xr-x | install-sh | 496 | ||||
| -rwxr-xr-x | missing | 210 | ||||
| -rwxr-xr-x | mkinstalldirs | 164 |
9 files changed, 5597 insertions, 3732 deletions
@@ -1,27 +1,43 @@ +Installation Instructions +************************* + +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free +Software Foundation, Inc. + +This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + Basic Installation ================== - These are generic installation instructions. +These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, a file -`config.cache' that saves the results of its tests to speed up -reconfiguring, and a file `config.log' containing compiler output -(useful mainly for debugging `configure'). +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. (Caching is +disabled by default to prevent problems with accidental use of stale +cache files.) If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can -be considered for the next release. If at some point `config.cache' -contains results you don't want to keep, you may remove or edit it. +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. - The file `configure.in' is used to create `configure' by a program -called `autoconf'. You only need `configure.in' if you want to change -it or regenerate `configure' using a newer version of `autoconf'. + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You only need +`configure.ac' if you want to change it or regenerate `configure' using +a newer version of `autoconf'. The simplest way to compile this package is: @@ -54,20 +70,22 @@ The simplest way to compile this package is: Compilers and Options ===================== - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. You can give `configure' -initial values for variables by setting them in the environment. Using -a Bourne-compatible shell, you can do that on the command line like -this: - CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure +Some systems require unusual options for compilation or linking that the +`configure' script does not know about. Run `./configure --help' for +details on some of the pertinent environment variables. -Or on systems that have the `env' program, you can do it like this: - env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + + *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== - You can compile the package for more than one kind of computer at the +You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the @@ -75,28 +93,28 @@ directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. - If you have to use a `make' that does not supports the `VPATH' -variable, you have to compile the package for one architecture at a time -in the source code directory. After you have installed the package for -one architecture, use `make distclean' before reconfiguring for another -architecture. + If you have to use a `make' that does not support the `VPATH' +variable, you have to compile the package for one architecture at a +time in the source code directory. After you have installed the +package for one architecture, use `make distclean' before reconfiguring +for another architecture. Installation Names ================== - By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. +By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for particular +options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. @@ -107,7 +125,7 @@ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= - Some packages pay attention to `--enable-FEATURE' options to +Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The @@ -122,48 +140,86 @@ you can use the `configure' options `--x-includes=DIR' and Specifying the System Type ========================== - There may be some features `configure' can not figure out -automatically, but needs to determine by the type of host the package -will run on. Usually `configure' can figure that out, but if it prints -a message saying it can not guess the host type, give it the -`--host=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name with three fields: +There may be some features `configure' cannot figure out automatically, +but needs to determine by the type of machine the package will run on. +Usually, assuming the package is built to be run on the _same_ +architectures, `configure' can figure that out, but if it prints a +message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + CPU-COMPANY-SYSTEM -See the file `config.sub' for the possible values of each field. If +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't -need to know the host type. +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. - If you are building compiler tools for cross-compiling, you can also -use the `--target=TYPE' option to select the type of system they will -produce code for and the `--build=TYPE' option to select the type of -system on which you are compiling the package. + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. Sharing Defaults ================ - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. +If you want to set default values for `configure' scripts to share, you +can create a site shell script called `config.site' that gives default +values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. -Operation Controls +Defining Variables ================== - `configure' recognizes the following options to control how it -operates. +Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: -`--cache-file=FILE' - Use and save the results of the tests in FILE instead of - `./config.cache'. Set FILE to `/dev/null' to disable caching, for - debugging `configure'. + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). Here is a another example: + + /bin/bash ./configure CONFIG_SHELL=/bin/bash + +Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent +configuration-related scripts to be executed by `/bin/bash'. + +`configure' Invocation +====================== + +`configure' recognizes the following options to control how it operates. `--help' +`-h' Print a summary of the options to `configure', and exit. +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + `--quiet' `--silent' `-q' @@ -175,8 +231,6 @@ operates. Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. -`--version' - Print the version of Autoconf used to generate the `configure' - script, and exit. +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. -`configure' also accepts some other, not widely useful, options. diff --git a/Makefile.in b/Makefile.in index d23a94b..0f47a59 100644 --- a/Makefile.in +++ b/Makefile.in @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.9.5 from Makefile.am. +# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -16,8 +16,6 @@ # Process this file with automake to produce Makefile.in -SOURCES = $(lcd4linux_SOURCES) $(EXTRA_lcd4linux_SOURCES) - srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ @@ -46,9 +44,9 @@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ TODO config.guess config.sub depcomp install-sh missing \ mkinstalldirs ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/curses.m4 $(top_srcdir)/curses.m4 \ - $(top_srcdir)/python.m4 $(top_srcdir)/drivers.m4 \ - $(top_srcdir)/plugins.m4 $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/curses.m4 $(top_srcdir)/python.m4 \ + $(top_srcdir)/drivers.m4 $(top_srcdir)/plugins.m4 \ + $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ @@ -118,6 +116,7 @@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -143,12 +142,12 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +XMKMF = @XMKMF@ X_CFLAGS = @X_CFLAGS@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_LIBS = @X_LIBS@ X_PRE_LIBS = @X_PRE_LIBS@ ac_ct_CC = @ac_ct_CC@ -ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ @@ -159,19 +158,26 @@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ +htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ +localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ +psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.9.5 -*- Autoconf -*- +# generated automatically by aclocal 1.9.6 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005 Free Software Foundation, Inc. @@ -28,7 +28,7 @@ AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.9.5])]) + [AM_AUTOMAKE_VERSION([1.9.6])]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- @@ -888,4 +888,3 @@ AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR -m4_include([curses.m4]) diff --git a/config.h.in b/config.h.in index ef29914..625293b 100644 --- a/config.h.in +++ b/config.h.in @@ -470,15 +470,18 @@ #undef inline #endif -/* Define to `long' if <sys/types.h> does not define. */ +/* Define to `long int' if <sys/types.h> does not define. */ #undef off_t /* Define to `int' if <sys/types.h> does not define. */ #undef pid_t -/* Define to `unsigned' if <sys/types.h> does not define. */ +/* Define to `unsigned int' if <sys/types.h> does not define. */ #undef size_t +/* Define to `int' if <sys/types.h> does not define. */ +#undef ssize_t + /* Define to `int' if <sys/types.h> doesn't define. */ #undef uid_t @@ -1,10 +1,11 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for LCD4Linux 0.10.1-CVS. +# Generated by GNU Autoconf 2.60 for LCD4Linux 0.10.1-CVS. # # Report bugs to <lcd4linux-users@lists.sourceforge.net>. # -# Copyright (C) 2003 Free Software Foundation, Inc. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## @@ -18,11 +19,35 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi +BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset @@ -31,8 +56,43 @@ else fi +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + # Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done PS1='$ ' PS2='> ' PS4='+ ' @@ -46,18 +106,19 @@ do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else - $as_unset $as_var + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false @@ -65,157 +126,386 @@ fi # Name of the executable. -as_me=`$as_basename "$0" || +as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` +# CDPATH. +$as_unset CDPATH -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no fi + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +for as_dir in /usr/bin/posix$PATH_SEPARATOR/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in + case $as_dir in /*) - if ("$as_dir/$as_base" -c ' + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( as_lineno_1=$LINENO as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell autoconf@gnu.org about your system, + echo including any error possibly output before this + echo message +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop - s,-$,, - s,^['$as_cr_digits']*\n,, + s/-\n.*// ' >$as_me.lineno && - chmod +x $as_me.lineno || + chmod +x "$as_me.lineno" || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" # Exit status is that of the last command. exit } -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: @@ -224,7 +514,19 @@ else as_mkdir_p=false fi -as_executable_p="test -f" +# Find out whether ``test -x'' works. Don't use a zero-byte file, as +# systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + as_executable_p="test -x" +else + as_executable_p=: +fi +rm -f conf$$.file # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -233,39 +535,27 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH +exec 7<&0 </dev/null 6>&1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -exec 6>&1 - # # Initializations. # ac_default_prefix=/usr/local +ac_clean_files= ac_config_libobj_dir=. +LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - # Identity of this package. PACKAGE_NAME='LCD4Linux' PACKAGE_TARNAME='lcd4linux' @@ -302,17 +592,117 @@ ac_includes_default="\ #endif #if HAVE_INTTYPES_H # include <inttypes.h> -#else -# if HAVE_STDINT_H -# include <stdint.h> -# endif +#endif +#if HAVE_STDINT_H +# include <stdint.h> #endif #if HAVE_UNISTD_H # include <unistd.h> #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP LN_S CURSES_LIBS CURSES_INCLUDEDIR EGREP X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS DRIVERS DRVLIBS PLUGINS PLUGINLIBS LIBOBJS POW_LIB LTLIBOBJS' +ac_subst_vars='SHELL +PATH_SEPARATOR +PACKAGE_NAME +PACKAGE_TARNAME +PACKAGE_VERSION +PACKAGE_STRING +PACKAGE_BUGREPORT +exec_prefix +prefix +program_transform_name +bindir +sbindir +libexecdir +datarootdir +datadir +sysconfdir +sharedstatedir +localstatedir +includedir +oldincludedir +docdir +infodir +htmldir +dvidir +pdfdir +psdir +libdir +localedir +mandir +DEFS +ECHO_C +ECHO_N +ECHO_T +LIBS +build_alias +host_alias +target_alias +INSTALL_PROGRAM +INSTALL_SCRIPT +INSTALL_DATA +CYGPATH_W +PACKAGE +VERSION +ACLOCAL +AUTOCONF +AUTOMAKE +AUTOHEADER +MAKEINFO +install_sh +STRIP +INSTALL_STRIP_PROGRAM +mkdir_p +AWK +SET_MAKE +am__leading_dot +AMTAR +am__tar +am__untar +CC +CFLAGS +LDFLAGS +CPPFLAGS +ac_ct_CC +EXEEXT +OBJEXT +DEPDIR +am__include +am__quote +AMDEP_TRUE +AMDEP_FALSE +AMDEPBACKSLASH +CCDEPMODE +am__fastdepCC_TRUE +am__fastdepCC_FALSE +CPP +LN_S +CURSES_LIBS +CURSES_INCLUDEDIR +GREP +EGREP +XMKMF +X_CFLAGS +X_PRE_LIBS +X_LIBS +X_EXTRA_LIBS +DRIVERS +DRVLIBS +PLUGINS +PLUGINLIBS +LIBOBJS +POW_LIB +LTLIBOBJS' ac_subst_files='' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +CPPFLAGS +CPP +XMKMF' + # Initialize some variables set by options. ac_init_help= @@ -339,34 +729,48 @@ x_libraries=NONE # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' +datarootdir='${prefix}/share' +datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' ac_prev= +ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" + eval $ac_prev=\$ac_option ac_prev= continue fi - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac # Accept the important Cygnus configure options, so we can diagnose typos. - case $ac_option in + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; @@ -388,12 +792,18 @@ do --config-cache | -C) cache_file=config.cache ;; - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) + -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. @@ -401,7 +811,17 @@ do { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; + eval enable_$ac_feature=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` @@ -410,11 +830,7 @@ do { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; + eval enable_$ac_feature=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -441,6 +857,12 @@ do -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; @@ -465,13 +887,16 @@ do | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) + | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) @@ -536,6 +961,16 @@ do | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; @@ -592,11 +1027,7 @@ do { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; + eval with_$ac_package=\$ac_optarg ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` @@ -605,7 +1036,7 @@ do { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; + eval with_$ac_package=no ;; --x) # Obsolete; use --with-x. @@ -636,8 +1067,7 @@ Try \`$0 --help' for more information." >&2 expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" + eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) @@ -657,27 +1087,19 @@ if test -n "$ac_prev"; then { (exit 1); exit 1; }; } fi -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix +# Be sure to have absolute directory names. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir do - eval ac_val=$`echo $ac_var` + eval ac_val=\$$ac_var case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' @@ -704,74 +1126,76 @@ test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { echo "$as_me: error: Working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$0" || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then + if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } - fi fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done # # Report the --help message. @@ -800,9 +1224,6 @@ Configuration: -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] -_ACEOF - - cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] @@ -820,15 +1241,22 @@ Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/lcd4linux] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF @@ -889,129 +1317,96 @@ Some influential environment variables: CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a nonstandard directory <lib dir> - CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have - headers in a nonstandard directory <include dir> + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if + you have headers in a nonstandard directory <include dir> CPP C preprocessor + XMKMF Path to xmkmf, Makefile generator for X Window System Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to <lcd4linux-users@lists.sourceforge.net>. _ACEOF +ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. - ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue + test -d "$ac_dir" || continue ac_builddir=. -if test "$ac_dir" != .; then +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } done fi -test -n "$ac_init_help" && exit 0 +test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF LCD4Linux configure 0.10.1-CVS -generated by GNU Autoconf 2.59 +generated by GNU Autoconf 2.60 -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF - exit 0 + exit fi -exec 5>config.log -cat >&5 <<_ACEOF +cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by LCD4Linux $as_me 0.10.1-CVS, which was -generated by GNU Autoconf 2.59. Invocation command line was +generated by GNU Autoconf 2.60. Invocation command line was $ $0 $@ _ACEOF +exec 5>>config.log { cat <<_ASUNAME ## --------- ## @@ -1030,7 +1425,7 @@ uname -v = `(uname -v) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` @@ -1044,6 +1439,7 @@ do test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done +IFS=$as_save_IFS } >&5 @@ -1065,7 +1461,6 @@ _ACEOF ac_configure_args= ac_configure_args0= ac_configure_args1= -ac_sep= ac_must_keep_next=false for ac_pass in 1 2 do @@ -1076,7 +1471,7 @@ do -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in @@ -1098,9 +1493,7 @@ do -* ) ac_must_keep_next=true ;; esac fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " + ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done @@ -1111,8 +1504,8 @@ $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_ # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { @@ -1125,20 +1518,34 @@ trap 'exit_status=$? _ASBOX echo # The following way of writing the cache mishandles newlines in values, -{ +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} + esac | + sort +) echo cat <<\_ASBOX @@ -1149,22 +1556,28 @@ _ASBOX echo for ac_var in $ac_subst_vars do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## +## ------------------- ## +## File substitutions. ## +## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" done | sort echo fi @@ -1176,26 +1589,24 @@ _ASBOX ## ----------- ## _ASBOX echo - sed "/^$/d" confdefs.h | sort + cat confdefs.h echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 - rm -f core *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status - ' 0 +' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h +rm -f -r conftest* confdefs.h # Predefined preprocessor variables. @@ -1226,14 +1637,17 @@ _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi +if test -n "$CONFIG_SITE"; then + set x "$CONFIG_SITE" +elif test "x$prefix" != xNONE; then + set x "$prefix/share/config.site" "$prefix/etc/config.site" +else + set x "$ac_default_prefix/share/config.site" \ + "$ac_default_prefix/etc/config.site" fi -for ac_site_file in $CONFIG_SITE; do +shift +for ac_site_file +do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} @@ -1249,8 +1663,8 @@ if test -r "$cache_file"; then { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; esac fi else @@ -1262,12 +1676,11 @@ fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do +for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 @@ -1292,8 +1705,7 @@ echo "$as_me: current value: $ac_new_val" >&2;} # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in @@ -1310,12 +1722,6 @@ echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start ov { (exit 1); exit 1; }; } fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - @@ -1340,34 +1746,45 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version="1.9" ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break - elif test -f $ac_dir/install.sh; then + elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break - elif test -f $ac_dir/shtool; then + elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 -echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 +echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} { (exit 1); exit 1; }; } fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or @@ -1382,8 +1799,8 @@ ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1405,7 +1822,7 @@ case $as_dir/ in # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -1424,21 +1841,22 @@ case $as_dir/ in ;; esac done +IFS=$as_save_IFS fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. @@ -1448,8 +1866,8 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } # Just in case sleep 1 echo timestamp > conftest.file @@ -1491,20 +1909,20 @@ echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } test "$program_prefix" != NONE && - program_transform_name="s,^,$program_prefix,;$program_transform_name" + program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && - program_transform_name="s,\$,$program_suffix,;$program_transform_name" + program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. echo might interpret backslashes. # By default was `s,x,x', remove it if useless. cat <<\_ACEOF >conftest.sed s/[\\$]/&&/g;s/;s,x,x,$// _ACEOF program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -rm conftest.sed +rm -f conftest.sed # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` @@ -1556,8 +1974,8 @@ for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AWK+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -1570,54 +1988,57 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then - echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6 + { echo "$as_me:$LINENO: result: $AWK" >&5 +echo "${ECHO_T}$AWK" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$AWK" && break done -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF +SHELL = /bin/sh all: - @echo 'ac_maketemp="$(MAKE)"' + @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac rm -f conftest.make fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } SET_MAKE= else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi @@ -1688,8 +2109,8 @@ if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -1702,32 +2123,34 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 + { echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -1740,27 +2163,41 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - STRIP=$ac_ct_STRIP + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi else STRIP="$ac_cv_prog_STRIP" fi @@ -1780,7 +2217,7 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - ac_config_headers="$ac_config_headers config.h" +ac_config_headers="$ac_config_headers config.h" # Checks for programs. @@ -1792,8 +2229,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -1806,32 +2243,34 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -1844,36 +2283,51 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -1886,74 +2340,34 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi + fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -1967,7 +2381,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue @@ -1978,6 +2392,7 @@ do fi done done +IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. @@ -1995,22 +2410,23 @@ fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2023,36 +2439,38 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2065,29 +2483,45 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$ac_ct_CC" && break done - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi fi fi @@ -2100,21 +2534,35 @@ See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 +echo "$as_me:$LINENO: checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 - (eval $ac_compiler --version </dev/null >&5) 2>&5 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 - (eval $ac_compiler -v </dev/null >&5) 2>&5 +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 - (eval $ac_compiler -V </dev/null >&5) 2>&5 +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } @@ -2139,46 +2587,70 @@ ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 +# +# List of possible output files, starting from the most likely. +# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) +# only as a last resort. b.out is created by i960 compilers. +ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' +# +# The IRIX 6 linker writes into existing files which may not be +# executable, retaining their permissions. Remove them first so a +# subsequent execution test works. +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { (ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link_default") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. break;; * ) break;; esac done +test "$ac_cv_exeext" = no && ac_cv_exeext= + else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 @@ -2191,19 +2663,23 @@ See \`config.log' for more details." >&2;} fi ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 +{ echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6; } -# Check the compiler produces executables we can run. If not, either +# Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -2222,22 +2698,27 @@ See \`config.log' for more details." >&2;} fi fi fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either +# Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } +{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6; } + +{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then @@ -2248,9 +2729,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext break;; * ) break;; esac @@ -2264,14 +2744,14 @@ See \`config.log' for more details." >&2;} fi rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2291,14 +2771,20 @@ main () } _ACEOF rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac @@ -2316,12 +2802,12 @@ fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2344,24 +2830,36 @@ main () } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -2370,24 +2868,83 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_compiler_gnu=no + ac_compiler_gnu=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -2403,24 +2960,92 @@ main () } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -2429,12 +3054,20 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_prog_cc_g=no + fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then @@ -2450,12 +3083,12 @@ else CFLAGS= fi fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then +{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_cv_prog_cc_stdc=no + ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -2489,12 +3122,17 @@ static char *f (char * (*g) (char **, int), char **p, ...) /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get + as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ + that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; @@ -2509,205 +3147,74 @@ return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; return 0; } _ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break + ac_cv_prog_cc_c89=$ac_arg else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext + +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break done -rm -f conftest.$ac_ext conftest.$ac_objext +rm -f conftest.$ac_ext CC=$ac_save_CC fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6; } ;; + xno) + { echo "$as_me:$LINENO: result: unsupported" >&5 +echo "${ECHO_T}unsupported" >&6; } ;; *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; + CC="$CC $ac_cv_prog_cc_c89" + { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; esac -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include <stdlib.h> -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -2715,7 +3222,7 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" - ac_config_commands="$ac_config_commands depfiles" +ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} @@ -2725,8 +3232,8 @@ am__doit: .PHONY: am__doit END # If we don't find an include directive, just comment out the code. -echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } am__include="#" am__quote= _am_result=none @@ -2753,15 +3260,15 @@ if test "$am__include" = "#"; then fi -echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6 +{ echo "$as_me:$LINENO: result: $_am_result" >&5 +echo "${ECHO_T}$_am_result" >&6; } rm -f confinc confmf -# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. +# Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then - enableval="$enable_dependency_tracking" + enableval=$enable_dependency_tracking; +fi -fi; if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' @@ -2781,8 +3288,8 @@ fi depcc="$CC" am_compiler_list= -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2871,8 +3378,8 @@ else fi fi -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 +{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type @@ -2893,8 +3400,8 @@ ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -2928,8 +3435,13 @@ cat >>conftest.$ac_ext <<_ACEOF #endif Syntax error _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -2954,9 +3466,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi + rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -2966,8 +3479,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <ac_nonexistent.h> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -2994,6 +3512,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_preproc_ok=: break fi + rm -f conftest.err conftest.$ac_ext done @@ -3011,8 +3530,8 @@ fi else ac_cv_prog_CPP=$CPP fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 +{ echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do @@ -3035,8 +3554,13 @@ cat >>conftest.$ac_ext <<_ACEOF #endif Syntax error _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -3061,9 +3585,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi + rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -3073,8 +3598,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <ac_nonexistent.h> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -3101,6 +3631,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_preproc_ok=: break fi + rm -f conftest.err conftest.$ac_ext done @@ -3135,8 +3666,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -3158,7 +3689,7 @@ case $as_dir/ in # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -3177,21 +3708,22 @@ case $as_dir/ in ;; esac done +IFS=$as_save_IFS fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. @@ -3201,57 +3733,57 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 +echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } else - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6 + { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +echo "${ECHO_T}no, using $LN_S" >&6; } fi -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF +SHELL = /bin/sh all: - @echo 'ac_maketemp="$(MAKE)"' + @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac rm -f conftest.make fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } SET_MAKE= else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi # dmalloc -echo "$as_me:$LINENO: checking if malloc debugging is wanted" >&5 -echo $ECHO_N "checking if malloc debugging is wanted... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking if malloc debugging is wanted" >&5 +echo $ECHO_N "checking if malloc debugging is wanted... $ECHO_C" >&6; } -# Check whether --with-dmalloc or --without-dmalloc was given. +# Check whether --with-dmalloc was given. if test "${with_dmalloc+set}" = set; then - withval="$with_dmalloc" - if test "$withval" = yes; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + withval=$with_dmalloc; if test "$withval" = yes; then + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } cat >>confdefs.h <<\_ACEOF #define WITH_DMALLOC 1 @@ -3260,20 +3792,21 @@ _ACEOF LIBS="$LIBS -ldmalloc" LDFLAGS="$LDFLAGS -g" else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi; + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + # Checks for libraries. -echo "$as_me:$LINENO: checking for log in -lm" >&5 -echo $ECHO_N "checking for log in -lm... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for log in -lm" >&5 +echo $ECHO_N "checking for log in -lm... $ECHO_C" >&6; } if test "${ac_cv_lib_m_log+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3286,40 +3819,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char log (); int main () { -log (); +return log (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -3328,14 +3873,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_m_log=no + ac_cv_lib_m_log=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_m_log" >&5 -echo "${ECHO_T}$ac_cv_lib_m_log" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_m_log" >&5 +echo "${ECHO_T}$ac_cv_lib_m_log" >&6; } if test $ac_cv_lib_m_log = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_LIBM 1 @@ -3370,19 +3916,166 @@ fi -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then +{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } +if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Extract the first word of "grep ggrep" to use in msg output +if test -z "$GREP"; then +set dummy grep ggrep; ac_prog_name=$2 +if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_path_GREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_executable_p "$ac_path_GREP"; } || continue + # Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_GREP_found && break 3 + done +done + +done +IFS=$as_save_IFS + + +fi + +GREP="$ac_cv_path_GREP" +if test -z "$GREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +fi + +else + ac_cv_path_GREP=$GREP +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +echo "${ECHO_T}$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + # Extract the first word of "egrep" to use in msg output +if test -z "$EGREP"; then +set dummy egrep; ac_prog_name=$2 +if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_path_EGREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_executable_p "$ac_path_EGREP"; } || continue + # Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_EGREP_found && break 3 + done +done + +done +IFS=$as_save_IFS + + +fi + +EGREP="$ac_cv_path_EGREP" +if test -z "$EGREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +fi + +else + ac_cv_path_EGREP=$EGREP +fi + + + fi fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep +{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" @@ -3396,10 +4089,9 @@ echo "${ECHO_T}$ac_cv_prog_egrep" >&6 -# Check whether --with-sco or --without-sco was given. +# Check whether --with-sco was given. if test "${with_sco+set}" = set; then - withval="$with_sco" - + withval=$with_sco; if test x$withval = xyes; then cat >>confdefs.h <<\_ACEOF @@ -3409,19 +4101,19 @@ _ACEOF CFLAGS="$CFLAGS -D_SVID3" fi -fi; +fi -# Check whether --with-sunos-curses or --without-sunos-curses was given. -if test "${with_sunos_curses+set}" = set; then - withval="$with_sunos_curses" +# Check whether --with-sunos-curses was given. +if test "${with_sunos_curses+set}" = set; then + withval=$with_sunos_curses; if test x$withval = xyes; then search_ncurses=false screen_manager="SunOS 4.x /usr/5include curses" - echo "$as_me:$LINENO: result: Using SunOS 4.x /usr/5include curses" >&5 -echo "${ECHO_T}Using SunOS 4.x /usr/5include curses" >&6 + { echo "$as_me:$LINENO: result: Using SunOS 4.x /usr/5include curses" >&5 +echo "${ECHO_T}Using SunOS 4.x /usr/5include curses" >&6; } cat >>confdefs.h <<\_ACEOF #define USE_SUNOS_CURSES 1 @@ -3445,22 +4137,22 @@ _ACEOF CURSES_INCLUDEDIR="-I/usr/5include" CURSES_LIBS="/usr/5lib/libcurses.a /usr/5lib/libtermcap.a" - echo "$as_me:$LINENO: result: Please note that some screen refreshs may fail" >&5 -echo "${ECHO_T}Please note that some screen refreshs may fail" >&6 + { echo "$as_me:$LINENO: result: Please note that some screen refreshs may fail" >&5 +echo "${ECHO_T}Please note that some screen refreshs may fail" >&6; } fi -fi; +fi -# Check whether --with-osf1-curses or --without-osf1-curses was given. -if test "${with_osf1_curses+set}" = set; then - withval="$with_osf1_curses" +# Check whether --with-osf1-curses was given. +if test "${with_osf1_curses+set}" = set; then + withval=$with_osf1_curses; if test x$withval = xyes; then - echo "$as_me:$LINENO: result: Using OSF1 curses" >&5 -echo "${ECHO_T}Using OSF1 curses" >&6 + { echo "$as_me:$LINENO: result: Using OSF1 curses" >&5 +echo "${ECHO_T}Using OSF1 curses" >&6; } search_ncurses=false screen_manager="OSF1 curses" @@ -3483,18 +4175,18 @@ _ACEOF fi -fi; +fi -# Check whether --with-vcurses or --without-vcurses was given. + +# Check whether --with-vcurses was given. if test "${with_vcurses+set}" = set; then - withval="$with_vcurses" - if test x$withval != xyes; then + withval=$with_vcurses; if test x$withval != xyes; then CURSES_INCLUDEDIR="-I$withval" fi - echo "$as_me:$LINENO: result: Using SysV curses" >&5 -echo "${ECHO_T}Using SysV curses" >&6 + { echo "$as_me:$LINENO: result: Using SysV curses" >&5 +echo "${ECHO_T}Using SysV curses" >&6; } cat >>confdefs.h <<\_ACEOF #define HAS_CURSES 1 @@ -3511,13 +4203,13 @@ _ACEOF CURSES_LIBS="-lcurses" -fi; +fi -# Check whether --with-ncurses or --without-ncurses was given. + +# Check whether --with-ncurses was given. if test "${with_ncurses+set}" = set; then - withval="$with_ncurses" - if test x$withval = xno ; then + withval=$with_ncurses; if test x$withval = xno ; then search_ncurses=false elif test x$withval != xyes ; then CURSES_LIBS="$LIBS -L$withval/lib -lncurses" @@ -3537,7 +4229,8 @@ _ACEOF has_curses=true fi -fi; +fi + if $search_ncurses then @@ -3550,8 +4243,8 @@ echo "$as_me: checking location of ncurses.h file..." >&6;} then if test -f /usr/include/ncurses.h then - echo "$as_me:$LINENO: result: Found ncurses on /usr/include/ncurses.h" >&5 -echo "${ECHO_T}Found ncurses on /usr/include/ncurses.h" >&6 + { echo "$as_me:$LINENO: result: Found ncurses on /usr/include/ncurses.h" >&5 +echo "${ECHO_T}Found ncurses on /usr/include/ncurses.h" >&6; } CURSES_LIBS="-lncurses" CURSES_INCLUDEDIR="" search_ncurses=false @@ -3575,8 +4268,8 @@ _ACEOF then if test -f /usr/include/ncurses/ncurses.h then - echo "$as_me:$LINENO: result: Found ncurses on /usr/include/ncurses/ncurses.h" >&5 -echo "${ECHO_T}Found ncurses on /usr/include/ncurses/ncurses.h" >&6 + { echo "$as_me:$LINENO: result: Found ncurses on /usr/include/ncurses/ncurses.h" >&5 +echo "${ECHO_T}Found ncurses on /usr/include/ncurses/ncurses.h" >&6; } CURSES_LIBS="-lncurses" CURSES_INCLUDEDIR="-I/usr/include/ncurses" search_ncurses=false @@ -3600,8 +4293,8 @@ _ACEOF then if test -f /usr/local/include/ncurses.h then - echo "$as_me:$LINENO: result: Found ncurses on /usr/local/include/ncurses.h" >&5 -echo "${ECHO_T}Found ncurses on /usr/local/include/ncurses.h" >&6 + { echo "$as_me:$LINENO: result: Found ncurses on /usr/local/include/ncurses.h" >&5 +echo "${ECHO_T}Found ncurses on /usr/local/include/ncurses.h" >&6; } CURSES_LIBS="-L/usr/local/lib -lncurses" CURSES_INCLUDEDIR="-I/usr/local/include" search_ncurses=false @@ -3625,8 +4318,8 @@ _ACEOF then if test -f /usr/local/include/ncurses/ncurses.h then - echo "$as_me:$LINENO: result: Found ncurses on /usr/local/include/ncurses/ncurses.h" >&5 -echo "${ECHO_T}Found ncurses on /usr/local/include/ncurses/ncurses.h" >&6 + { echo "$as_me:$LINENO: result: Found ncurses on /usr/local/include/ncurses/ncurses.h" >&5 +echo "${ECHO_T}Found ncurses on /usr/local/include/ncurses/ncurses.h" >&6; } CURSES_LIBS="-L/usr/local/lib -L/usr/local/lib/ncurses -lncurses" CURSES_INCLUDEDIR="-I/usr/local/include/ncurses" search_ncurses=false @@ -3651,8 +4344,8 @@ _ACEOF then if test -f /usr/local/include/ncurses/curses.h then - echo "$as_me:$LINENO: result: Found ncurses on /usr/local/include/ncurses/curses.h" >&5 -echo "${ECHO_T}Found ncurses on /usr/local/include/ncurses/curses.h" >&6 + { echo "$as_me:$LINENO: result: Found ncurses on /usr/local/include/ncurses/curses.h" >&5 +echo "${ECHO_T}Found ncurses on /usr/local/include/ncurses/curses.h" >&6; } CURSES_LIBS="-L/usr/local/lib -lncurses" CURSES_INCLUDEDIR="-I/usr/local/include/ncurses -DRENAMED_NCURSES" search_ncurses=false @@ -3677,8 +4370,8 @@ _ACEOF then if test -f /usr/include/ncurses/curses.h then - echo "$as_me:$LINENO: result: Found ncurses on /usr/include/ncurses/curses.h" >&5 -echo "${ECHO_T}Found ncurses on /usr/include/ncurses/curses.h" >&6 + { echo "$as_me:$LINENO: result: Found ncurses on /usr/include/ncurses/curses.h" >&5 +echo "${ECHO_T}Found ncurses on /usr/include/ncurses/curses.h" >&6; } CURSES_LIBS="-lncurses" CURSES_INCLUDEDIR="-I/usr/include/ncurses -DRENAMED_NCURSES" search_ncurses=false @@ -3712,8 +4405,8 @@ _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "init_color" >/dev/null 2>&1; then - echo "$as_me:$LINENO: result: Using SysV curses" >&5 -echo "${ECHO_T}Using SysV curses" >&6 + { echo "$as_me:$LINENO: result: Using SysV curses" >&5 +echo "${ECHO_T}Using SysV curses" >&6; } cat >>confdefs.h <<\_ACEOF #define HAS_CURSES 1 @@ -3776,8 +4469,8 @@ rm -f conftest* search_ncurses=false screen_manager="SunOS 4.x /usr/5include curses" - echo "$as_me:$LINENO: result: Using SunOS 4.x /usr/5include curses" >&5 -echo "${ECHO_T}Using SunOS 4.x /usr/5include curses" >&6 + { echo "$as_me:$LINENO: result: Using SunOS 4.x /usr/5include curses" >&5 +echo "${ECHO_T}Using SunOS 4.x /usr/5include curses" >&6; } cat >>confdefs.h <<\_ACEOF #define USE_SUNOS_CURSES 1 @@ -3801,17 +4494,17 @@ _ACEOF CURSES_INCLUDEDIR="-I/usr/5include" CURSES_LIBS="/usr/5lib/libcurses.a /usr/5lib/libtermcap.a" - echo "$as_me:$LINENO: result: Please note that some screen refreshs may fail" >&5 -echo "${ECHO_T}Please note that some screen refreshs may fail" >&6 + { echo "$as_me:$LINENO: result: Please note that some screen refreshs may fail" >&5 +echo "${ECHO_T}Please note that some screen refreshs may fail" >&6; } fi else # check for ncurses version, to properly ifdef mouse-fix - echo "$as_me:$LINENO: checking for ncurses version" >&5 -echo $ECHO_N "checking for ncurses version... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for ncurses version" >&5 +echo $ECHO_N "checking for ncurses version... $ECHO_C" >&6; } ncurses_version=unknown cat > conftest.$ac_ext <<EOF -#line 3814 "configure" +#line 4507 "configure" #include "confdefs.h" #ifdef RENAMED_NCURSES #include <curses.h> @@ -3826,8 +4519,8 @@ EOF ncurses_version=`cat conftest.out|sed -e 's/^[^"]*"//' -e 's/".*//'` fi rm -rf conftest* - echo "$as_me:$LINENO: result: $ncurses_version" >&5 -echo "${ECHO_T}$ncurses_version" >&6 + { echo "$as_me:$LINENO: result: $ncurses_version" >&5 +echo "${ECHO_T}$ncurses_version" >&6; } case "$ncurses_version" in 4.[01]) @@ -3859,44 +4552,49 @@ _ACEOF # Checks for X11 -echo "$as_me:$LINENO: checking for X" >&5 -echo $ECHO_N "checking for X... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for X" >&5 +echo $ECHO_N "checking for X... $ECHO_C" >&6; } -# Check whether --with-x or --without-x was given. +# Check whether --with-x was given. if test "${with_x+set}" = set; then - withval="$with_x" + withval=$with_x; +fi -fi; # $have_x is `yes', `no', `disabled', or empty when we do not yet know. if test "x$with_x" = xno; then # The user explicitly disabled X. have_x=disabled else - if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then - # Both variables are already set. - have_x=yes - else - if test "${ac_cv_have_x+set}" = set; then + case $x_includes,$x_libraries in #( + *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 +echo "$as_me: error: Cannot use X directory names containing '" >&2;} + { (exit 1); exit 1; }; };; #( + *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # One or both of the vars are not set, and there is no cached value. ac_x_includes=no ac_x_libraries=no -rm -fr conftest.dir +rm -f -r conftest.dir if mkdir conftest.dir; then cd conftest.dir - # Make sure to not put "make" in the Imakefile rules, since we grep it out. cat >Imakefile <<'_ACEOF' -acfindx: - @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' -_ACEOF - if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then +incroot: + @echo incroot='${INCROOT}' +usrlibdir: + @echo usrlibdir='${USRLIBDIR}' +libdir: + @echo libdir='${LIBDIR}' +_ACEOF + if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then # GNU make sometimes prints "make[1]: Entering...", which would confuse us. - eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` + for ac_var in incroot usrlibdir libdir; do + eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" + done # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. for ac_extension in a so sl; do - if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && - test -f $ac_im_libdir/libX11.$ac_extension; then + if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && + test -f "$ac_im_libdir/libX11.$ac_extension"; then ac_im_usrlibdir=$ac_im_libdir; break fi done @@ -3904,7 +4602,7 @@ _ACEOF # bogus both because they are the default anyway, and because # using them would break gcc on systems where it needs fixed includes. case $ac_im_incroot in - /usr/include) ;; + /usr/include) ac_x_includes= ;; *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; esac case $ac_im_usrlibdir in @@ -3913,7 +4611,7 @@ _ACEOF esac fi cd .. - rm -fr conftest.dir + rm -f -r conftest.dir fi # Standard set of common directories for X headers. @@ -3954,7 +4652,7 @@ ac_x_header_dirs=' /usr/openwin/share/include' if test "$ac_x_includes" = no; then - # Guess where to find include files, by looking for Intrinsic.h. + # Guess where to find include files, by looking for Xlib.h. # First, try using that file with no special directory specified. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -3962,10 +4660,15 @@ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include <X11/Intrinsic.h> +#include <X11/Xlib.h> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -3989,12 +4692,13 @@ else sed 's/^/| /' conftest.$ac_ext >&5 for ac_dir in $ac_x_header_dirs; do - if test -r "$ac_dir/X11/Intrinsic.h"; then + if test -r "$ac_dir/X11/Xlib.h"; then ac_x_includes=$ac_dir break fi done fi + rm -f conftest.err conftest.$ac_ext fi # $ac_x_includes = no @@ -4010,34 +4714,46 @@ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include <X11/Intrinsic.h> +#include <X11/Xlib.h> int main () { -XtMalloc (0) +XrmInitialize () ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4048,49 +4764,54 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -LIBS=$ac_save_LIBS + LIBS=$ac_save_LIBS for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` do # Don't even attempt the hair of trying to link an X program! for ac_extension in a so sl; do - if test -r $ac_dir/libXt.$ac_extension; then + if test -r "$ac_dir/libXt.$ac_extension"; then ac_x_libraries=$ac_dir break 2 fi done done fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi # $ac_x_libraries = no -if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then - # Didn't find X anywhere. Cache the known absence of X. - ac_cv_have_x="have_x=no" -else - # Record where we found X for the cache. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" -fi +case $ac_x_includes,$ac_x_libraries in #( + no,* | *,no | *\'*) + # Didn't find X, or a directory has "'" in its name. + ac_cv_have_x="have_x=no";; #( + *) + # Record where we found X for the cache. + ac_cv_have_x="have_x=yes\ + ac_x_includes='$ac_x_includes'\ + ac_x_libraries='$ac_x_libraries'" +esac fi - - fi +;; #( + *) have_x=yes;; + esac eval "$ac_cv_have_x" fi # $with_x != no if test "$have_x" != yes; then - echo "$as_me:$LINENO: result: $have_x" >&5 -echo "${ECHO_T}$have_x" >&6 + { echo "$as_me:$LINENO: result: $have_x" >&5 +echo "${ECHO_T}$have_x" >&6; } no_x=yes else # If each of the values was on the command line, it overrides each guess. test "x$x_includes" = xNONE && x_includes=$ac_x_includes test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries # Update the cache value to reflect the command line values. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$x_includes ac_x_libraries=$x_libraries" - echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 -echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6 + ac_cv_have_x="have_x=yes\ + ac_x_includes='$x_includes'\ + ac_x_libraries='$x_libraries'" + { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 +echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; } fi if test "$no_x" = yes; then @@ -4113,8 +4834,8 @@ else # others require no space. Words are not sufficient . . . . case `(uname -sr) 2>/dev/null` in "SunOS 5"*) - echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 -echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 +echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6; } ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -4132,24 +4853,36 @@ main () } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4158,13 +4891,14 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_R_nospace=no + ac_R_nospace=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test $ac_R_nospace = yes; then - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } X_LIBS="$X_LIBS -R$x_libraries" else LIBS="$ac_xsave_LIBS -R $x_libraries" @@ -4184,24 +4918,36 @@ main () } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4210,17 +4956,18 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_R_space=no + ac_R_space=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test $ac_R_space = yes; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } X_LIBS="$X_LIBS -R $x_libraries" else - echo "$as_me:$LINENO: result: neither works" >&5 -echo "${ECHO_T}neither works" >&6 + { echo "$as_me:$LINENO: result: neither works" >&5 +echo "${ECHO_T}neither works" >&6; } fi fi LIBS=$ac_xsave_LIBS @@ -4245,40 +4992,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char XOpenDisplay (); int main () { -XOpenDisplay (); +return XOpenDisplay (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4287,8 +5046,8 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 -echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 +echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6; } if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4301,40 +5060,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dnet_ntoa (); int main () { -dnet_ntoa (); +return dnet_ntoa (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4343,21 +5114,22 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dnet_dnet_ntoa=no + ac_cv_lib_dnet_dnet_ntoa=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 +echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6; } if test $ac_cv_lib_dnet_dnet_ntoa = yes; then X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" fi if test $ac_cv_lib_dnet_dnet_ntoa = no; then - echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 -echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 +echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6; } if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4370,40 +5142,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dnet_ntoa (); int main () { -dnet_ntoa (); +return dnet_ntoa (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4412,21 +5196,23 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dnet_stub_dnet_ntoa=no + ac_cv_lib_dnet_stub_dnet_ntoa=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 +echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" fi fi fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$ac_xsave_LIBS" @@ -4438,8 +5224,8 @@ rm -f conftest.err conftest.$ac_objext \ # on Irix 5.2, according to T.E. Dickey. # The functions gethostbyname, getservbyname, and inet_addr are # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. - echo "$as_me:$LINENO: checking for gethostbyname" >&5 -echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for gethostbyname" >&5 +echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; } if test "${ac_cv_func_gethostbyname+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4466,53 +5252,59 @@ cat >>conftest.$ac_ext <<_ACEOF #undef gethostbyname -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char gethostbyname (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) +#if defined __stub_gethostbyname || defined __stub___gethostbyname choke me -#else -char (*f) () = gethostbyname; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != gethostbyname; +return gethostbyname (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4521,17 +5313,18 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_func_gethostbyname=no + ac_cv_func_gethostbyname=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; } if test $ac_cv_func_gethostbyname = no; then - echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 -echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; } if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4544,40 +5337,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char gethostbyname (); int main () { -gethostbyname (); +return gethostbyname (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4586,21 +5391,22 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_nsl_gethostbyname=no + ac_cv_lib_nsl_gethostbyname=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; } if test $ac_cv_lib_nsl_gethostbyname = yes; then X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" fi if test $ac_cv_lib_nsl_gethostbyname = no; then - echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 -echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 +echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6; } if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4613,40 +5419,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char gethostbyname (); int main () { -gethostbyname (); +return gethostbyname (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4655,14 +5473,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_bsd_gethostbyname=no + ac_cv_lib_bsd_gethostbyname=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6; } if test $ac_cv_lib_bsd_gethostbyname = yes; then X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" fi @@ -4677,8 +5496,8 @@ fi # variants that don't use the name server (or something). -lsocket # must be given before -lnsl if both are needed. We assume that # if connect needs -lnsl, so does gethostbyname. - echo "$as_me:$LINENO: checking for connect" >&5 -echo $ECHO_N "checking for connect... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for connect" >&5 +echo $ECHO_N "checking for connect... $ECHO_C" >&6; } if test "${ac_cv_func_connect+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4705,53 +5524,59 @@ cat >>conftest.$ac_ext <<_ACEOF #undef connect -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char connect (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_connect) || defined (__stub___connect) +#if defined __stub_connect || defined __stub___connect choke me -#else -char (*f) () = connect; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != connect; +return connect (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4760,17 +5585,18 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_func_connect=no + ac_cv_func_connect=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 -echo "${ECHO_T}$ac_cv_func_connect" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 +echo "${ECHO_T}$ac_cv_func_connect" >&6; } if test $ac_cv_func_connect = no; then - echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 -echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 +echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; } if test "${ac_cv_lib_socket_connect+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4783,40 +5609,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char connect (); int main () { -connect (); +return connect (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4825,14 +5663,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_socket_connect=no + ac_cv_lib_socket_connect=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 -echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 +echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; } if test $ac_cv_lib_socket_connect = yes; then X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" fi @@ -4840,8 +5679,8 @@ fi fi # Guillermo Gomez says -lposix is necessary on A/UX. - echo "$as_me:$LINENO: checking for remove" >&5 -echo $ECHO_N "checking for remove... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for remove" >&5 +echo $ECHO_N "checking for remove... $ECHO_C" >&6; } if test "${ac_cv_func_remove+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4868,53 +5707,59 @@ cat >>conftest.$ac_ext <<_ACEOF #undef remove -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char remove (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_remove) || defined (__stub___remove) +#if defined __stub_remove || defined __stub___remove choke me -#else -char (*f) () = remove; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != remove; +return remove (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4923,17 +5768,18 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_func_remove=no + ac_cv_func_remove=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 -echo "${ECHO_T}$ac_cv_func_remove" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 +echo "${ECHO_T}$ac_cv_func_remove" >&6; } if test $ac_cv_func_remove = no; then - echo "$as_me:$LINENO: checking for remove in -lposix" >&5 -echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for remove in -lposix" >&5 +echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6; } if test "${ac_cv_lib_posix_remove+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4946,40 +5792,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char remove (); int main () { -remove (); +return remove (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -4988,14 +5846,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_posix_remove=no + ac_cv_lib_posix_remove=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 -echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 +echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6; } if test $ac_cv_lib_posix_remove = yes; then X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" fi @@ -5003,8 +5862,8 @@ fi fi # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - echo "$as_me:$LINENO: checking for shmat" >&5 -echo $ECHO_N "checking for shmat... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for shmat" >&5 +echo $ECHO_N "checking for shmat... $ECHO_C" >&6; } if test "${ac_cv_func_shmat+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5031,53 +5890,59 @@ cat >>conftest.$ac_ext <<_ACEOF #undef shmat -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char shmat (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_shmat) || defined (__stub___shmat) +#if defined __stub_shmat || defined __stub___shmat choke me -#else -char (*f) () = shmat; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != shmat; +return shmat (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -5086,17 +5951,18 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_func_shmat=no + ac_cv_func_shmat=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 -echo "${ECHO_T}$ac_cv_func_shmat" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 +echo "${ECHO_T}$ac_cv_func_shmat" >&6; } if test $ac_cv_func_shmat = no; then - echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 -echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 +echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6; } if test "${ac_cv_lib_ipc_shmat+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5109,40 +5975,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char shmat (); int main () { -shmat (); +return shmat (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -5151,14 +6029,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_ipc_shmat=no + ac_cv_lib_ipc_shmat=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 -echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 +echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6; } if test $ac_cv_lib_ipc_shmat = yes; then X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" fi @@ -5175,8 +6054,8 @@ fi # These have to be linked with before -lX11, unlike the other # libraries we check for below, so use a different variable. # John Interrante, Karl Berry - echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 -echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 +echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6; } if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5189,40 +6068,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char IceConnectionNumber (); int main () { -IceConnectionNumber (); +return IceConnectionNumber (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -5231,14 +6122,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_ICE_IceConnectionNumber=no + ac_cv_lib_ICE_IceConnectionNumber=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 -echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 +echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6; } if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" fi @@ -5249,8 +6141,8 @@ fi # double-check for X11 if test "$no_x" != "yes"; then - echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5274,24 +6166,36 @@ main () } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -5300,9 +6204,10 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_header_stdc=no + ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. @@ -5358,6 +6263,7 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <ctype.h> +#include <stdlib.h> #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) @@ -5377,18 +6283,27 @@ main () for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); + return 2; + return 0; } _ACEOF rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -5401,12 +6316,14 @@ sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + + fi fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF @@ -5429,9 +6346,9 @@ for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -5445,24 +6362,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -5471,12 +6400,14 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_Header=no" + eval "$as_ac_Header=no" fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 @@ -5492,18 +6423,19 @@ done for ac_header in X11/Xlib.h X11/Xutil.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -5514,24 +6446,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -5540,15 +6484,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -5557,8 +6502,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -5582,9 +6532,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -5608,25 +6559,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -5654,18 +6604,19 @@ fi for ac_header in gd/gd.h gd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -5676,24 +6627,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -5702,15 +6665,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -5719,8 +6683,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -5744,9 +6713,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -5770,25 +6740,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -5808,18 +6777,19 @@ done for ac_header in usb.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -5830,24 +6800,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -5856,15 +6838,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -5873,8 +6856,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -5898,9 +6886,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -5924,25 +6913,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -5962,18 +6950,19 @@ done for ac_header in luise.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -5984,24 +6973,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -6010,15 +7011,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -6027,8 +7029,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -6052,9 +7059,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -6078,25 +7086,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -6116,18 +7123,19 @@ done for ac_header in serdisplib/serdisp.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -6138,24 +7146,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -6164,15 +7184,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -6181,8 +7202,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -6206,9 +7232,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -6232,25 +7259,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -6271,18 +7297,19 @@ done for ac_header in linux/lcd-linux.h linux/hd44780.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -6293,24 +7320,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -6319,15 +7358,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -6336,8 +7376,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -6361,9 +7406,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -6387,25 +7433,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -6421,18 +7466,18 @@ done # check for python -echo "$as_me:$LINENO: checking if python support is wanted" >&5 -echo $ECHO_N "checking if python support is wanted... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking if python support is wanted" >&5 +echo $ECHO_N "checking if python support is wanted... $ECHO_C" >&6; } -# Check whether --with-python or --without-python was given. +# Check whether --with-python was given. if test "${with_python+set}" = set; then - withval="$with_python" - echo "$as_me:$LINENO: result: $withval" >&5 -echo "${ECHO_T}$withval" >&6 + withval=$with_python; { echo "$as_me:$LINENO: result: $withval" >&5 +echo "${ECHO_T}$withval" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi; + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + if test "$with_python" = "yes"; then ## ------------------------ ## Python file handling @@ -6504,17 +7549,17 @@ fi # drivers -echo "$as_me:$LINENO: checking which drivers to compile" >&5 -echo $ECHO_N "checking which drivers to compile... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking which drivers to compile" >&5 +echo $ECHO_N "checking which drivers to compile... $ECHO_C" >&6; } -# Check whether --with-drivers or --without-drivers was given. +# Check whether --with-drivers was given. if test "${with_drivers+set}" = set; then - withval="$with_drivers" - drivers=$withval + withval=$with_drivers; drivers=$withval else drivers=all -fi; +fi + drivers=`echo $drivers|sed 's/,/ /g'` @@ -6661,8 +7706,8 @@ echo "$as_me: error: Unknown driver '$driver'" >&2;} esac done -echo "$as_me:$LINENO: result: done" >&5 -echo "${ECHO_T}done" >&6 +{ echo "$as_me:$LINENO: result: done" >&5 +echo "${ECHO_T}done" >&6; } # generic display drivers @@ -7158,17 +8203,17 @@ fi # plugins -echo "$as_me:$LINENO: checking which plugins to compile" >&5 -echo $ECHO_N "checking which plugins to compile... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking which plugins to compile" >&5 +echo $ECHO_N "checking which plugins to compile... $ECHO_C" >&6; } -# Check whether --with-plugins or --without-plugins was given. +# Check whether --with-plugins was given. if test "${with_plugins+set}" = set; then - withval="$with_plugins" - plugins=$withval + withval=$with_plugins; plugins=$withval else plugins=all -fi; +fi + plugins=`echo $plugins|sed 's/,/ /g'` @@ -7186,8 +8231,8 @@ for plugin in $plugins; do case "$plugin" in list) - echo "$as_me:$LINENO: result: TO BE DONE..." >&5 -echo "${ECHO_T}TO BE DONE..." >&6 + { echo "$as_me:$LINENO: result: TO BE DONE..." >&5 +echo "${ECHO_T}TO BE DONE..." >&6; } { { echo "$as_me:$LINENO: error: run ./configure --with-plugins=..." >&5 echo "$as_me: error: run ./configure --with-plugins=..." >&2;} { (exit 1); exit 1; }; } @@ -7306,8 +8351,8 @@ echo "$as_me: error: Unknown plugin '$plugin'" >&2;} esac done -echo "$as_me:$LINENO: result: done" >&5 -echo "${ECHO_T}done" >&6 +{ echo "$as_me:$LINENO: result: done" >&5 +echo "${ECHO_T}done" >&6; } if test "$PLUGIN_APM" = "yes"; then PLUGINS="$PLUGINS plugin_apm.o" @@ -7337,18 +8382,19 @@ if test "$PLUGIN_DVB" = "yes"; then for ac_header in linux/dvb/frontend.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -7359,24 +8405,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -7385,15 +8443,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -7402,8 +8461,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -7427,9 +8491,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -7453,25 +8518,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -7535,18 +8599,19 @@ if test "$PLUGIN_ISDN" = "yes"; then for ac_header in linux/isdn.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -7557,24 +8622,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -7583,15 +8660,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -7600,8 +8678,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -7625,9 +8708,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -7651,25 +8735,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -7723,18 +8806,19 @@ if test "$PLUGIN_MPD" = "yes"; then for ac_header in libmpd/libmpd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -7745,24 +8829,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -7771,15 +8867,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -7788,8 +8885,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -7813,9 +8915,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -7839,25 +8942,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -7872,8 +8974,8 @@ fi done if test "$has_libmpd_header" = "true"; then - echo "$as_me:$LINENO: checking for mpd_connect in -lmpd" >&5 -echo $ECHO_N "checking for mpd_connect in -lmpd... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for mpd_connect in -lmpd" >&5 +echo $ECHO_N "checking for mpd_connect in -lmpd... $ECHO_C" >&6; } if test "${ac_cv_lib_mpd_mpd_connect+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -7886,40 +8988,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char mpd_connect (); int main () { -mpd_connect (); +return mpd_connect (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -7928,14 +9042,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_mpd_mpd_connect=no + ac_cv_lib_mpd_mpd_connect=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_mpd_mpd_connect" >&5 -echo "${ECHO_T}$ac_cv_lib_mpd_mpd_connect" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_mpd_mpd_connect" >&5 +echo "${ECHO_T}$ac_cv_lib_mpd_mpd_connect" >&6; } if test $ac_cv_lib_mpd_mpd_connect = yes; then has_libmpd_lib="true" else @@ -7964,18 +9079,19 @@ if test "$PLUGIN_MYSQL" = "yes"; then for ac_header in mysql/mysql.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -7986,24 +9102,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -8012,15 +9140,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -8029,8 +9158,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -8054,9 +9188,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -8080,25 +9215,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -8113,8 +9247,8 @@ fi done if test "$has_mysql_header" = "true"; then - echo "$as_me:$LINENO: checking for mysql_init in -lmysqlclient" >&5 -echo $ECHO_N "checking for mysql_init in -lmysqlclient... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for mysql_init in -lmysqlclient" >&5 +echo $ECHO_N "checking for mysql_init in -lmysqlclient... $ECHO_C" >&6; } if test "${ac_cv_lib_mysqlclient_mysql_init+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -8127,40 +9261,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char mysql_init (); int main () { -mysql_init (); +return mysql_init (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -8169,14 +9315,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_mysqlclient_mysql_init=no + ac_cv_lib_mysqlclient_mysql_init=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_mysqlclient_mysql_init" >&5 -echo "${ECHO_T}$ac_cv_lib_mysqlclient_mysql_init" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_mysqlclient_mysql_init" >&5 +echo "${ECHO_T}$ac_cv_lib_mysqlclient_mysql_init" >&6; } if test $ac_cv_lib_mysqlclient_mysql_init = yes; then has_mysql_lib="true" else @@ -8221,18 +9368,19 @@ if test "$PLUGIN_PPP" = "yes"; then for ac_header in net/if_ppp.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -8243,24 +9391,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -8269,15 +9429,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -8286,8 +9447,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -8311,9 +9477,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -8337,25 +9504,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -8492,9 +9658,9 @@ fi ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5 -echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5 +echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -8516,24 +9682,36 @@ return 0; } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -8542,12 +9720,14 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_Header=no" + eval "$as_ac_Header=no" fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 @@ -8559,13 +9739,12 @@ fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then - echo "$as_me:$LINENO: checking for library containing opendir" >&5 -echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for library containing opendir" >&5 +echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; } if test "${ac_cv_search_opendir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_func_search_save_LIBS=$LIBS -ac_cv_search_opendir=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -8573,126 +9752,99 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char opendir (); int main () { -opendir (); +return opendir (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +for ac_lib in '' dir; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_search_opendir="none required" + ac_cv_search_opendir=$ac_res else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test "$ac_cv_search_opendir" = no; then - for ac_lib in dir; do - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char opendir (); -int -main () -{ -opendir (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_search_opendir="-l$ac_lib" -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if test "${ac_cv_search_opendir+set}" = set; then + break fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - done +done +if test "${ac_cv_search_opendir+set}" = set; then + : +else + ac_cv_search_opendir=no fi +rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 -echo "${ECHO_T}$ac_cv_search_opendir" >&6 -if test "$ac_cv_search_opendir" != no; then - test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" +{ echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 +echo "${ECHO_T}$ac_cv_search_opendir" >&6; } +ac_res=$ac_cv_search_opendir +if test "$ac_res" != no; then + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi else - echo "$as_me:$LINENO: checking for library containing opendir" >&5 -echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for library containing opendir" >&5 +echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; } if test "${ac_cv_search_opendir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_func_search_save_LIBS=$LIBS -ac_cv_search_opendir=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -8700,122 +9852,96 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char opendir (); int main () { -opendir (); +return opendir (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +for ac_lib in '' x; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_search_opendir="none required" + ac_cv_search_opendir=$ac_res else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test "$ac_cv_search_opendir" = no; then - for ac_lib in x; do - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char opendir (); -int -main () -{ -opendir (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_search_opendir="-l$ac_lib" -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if test "${ac_cv_search_opendir+set}" = set; then + break fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - done +done +if test "${ac_cv_search_opendir+set}" = set; then + : +else + ac_cv_search_opendir=no fi +rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 -echo "${ECHO_T}$ac_cv_search_opendir" >&6 -if test "$ac_cv_search_opendir" != no; then - test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" +{ echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 +echo "${ECHO_T}$ac_cv_search_opendir" >&6; } +ac_res=$ac_cv_search_opendir +if test "$ac_res" != no; then + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi fi -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -8839,24 +9965,36 @@ main () } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -8865,9 +10003,10 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_header_stdc=no + ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. @@ -8923,6 +10062,7 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <ctype.h> +#include <stdlib.h> #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) @@ -8942,18 +10082,27 @@ main () for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); + return 2; + return 0; } _ACEOF rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -8966,12 +10115,14 @@ sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + + fi fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF @@ -8996,18 +10147,19 @@ fi for ac_header in arpa/inet.h fcntl.h netdb.h netinet/in.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/time.h sys/vfs.h syslog.h termios.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -9018,24 +10170,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -9044,15 +10208,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -9061,8 +10226,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -9086,9 +10256,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -9112,25 +10283,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -9147,18 +10317,19 @@ done for ac_header in sys/io.h asm/io.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -9169,24 +10340,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -9195,15 +10378,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -9212,8 +10396,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -9237,9 +10426,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -9263,25 +10453,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -9298,18 +10487,19 @@ done for ac_header in linux/parport.h linux/ppdev.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -9320,24 +10510,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -9346,15 +10548,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -9363,8 +10566,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -9388,9 +10596,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -9414,25 +10623,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -9448,18 +10656,19 @@ done for ac_header in asm/msr.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -9470,24 +10679,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -9496,15 +10717,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -9513,8 +10735,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -9538,9 +10765,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -9564,25 +10792,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -9596,8 +10823,8 @@ done # Checks for typedefs, structures, and compiler characteristics. -echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 -echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; } if test "${ac_cv_c_const+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -9637,6 +10864,7 @@ main () char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; + if (s) return 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; @@ -9655,7 +10883,9 @@ main () } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; + if (!foo) return 0; } + return !x[0] && !zero.x; #endif ; @@ -9663,24 +10893,36 @@ main () } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -9689,12 +10931,13 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_c_const=no + ac_cv_c_const=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 -echo "${ECHO_T}$ac_cv_c_const" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +echo "${ECHO_T}$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then cat >>confdefs.h <<\_ACEOF @@ -9703,8 +10946,8 @@ _ACEOF fi -echo "$as_me:$LINENO: checking for inline" >&5 -echo $ECHO_N "checking for inline... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for inline" >&5 +echo $ECHO_N "checking for inline... $ECHO_C" >&6; } if test "${ac_cv_c_inline+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -9724,39 +10967,54 @@ $ac_kw foo_t foo () {return 0; } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_c_inline=$ac_kw; break + ac_cv_c_inline=$ac_kw else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test "$ac_cv_c_inline" != no && break done fi -echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 -echo "${ECHO_T}$ac_cv_c_inline" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 +echo "${ECHO_T}$ac_cv_c_inline" >&6; } case $ac_cv_c_inline in @@ -9774,8 +11032,8 @@ _ACEOF ;; esac -echo "$as_me:$LINENO: checking for off_t" >&5 -echo $ECHO_N "checking for off_t... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for off_t" >&5 +echo $ECHO_N "checking for off_t... $ECHO_C" >&6; } if test "${ac_cv_type_off_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -9786,36 +11044,49 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default +typedef off_t ac__type_new_; int main () { -if ((off_t *) 0) +if ((ac__type_new_ *) 0) return 0; -if (sizeof (off_t)) +if (sizeof (ac__type_new_)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -9824,24 +11095,25 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_type_off_t=no + ac_cv_type_off_t=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5 -echo "${ECHO_T}$ac_cv_type_off_t" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5 +echo "${ECHO_T}$ac_cv_type_off_t" >&6; } if test $ac_cv_type_off_t = yes; then : else cat >>confdefs.h <<_ACEOF -#define off_t long +#define off_t long int _ACEOF fi -echo "$as_me:$LINENO: checking for pid_t" >&5 -echo $ECHO_N "checking for pid_t... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for pid_t" >&5 +echo $ECHO_N "checking for pid_t... $ECHO_C" >&6; } if test "${ac_cv_type_pid_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -9852,36 +11124,49 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default +typedef pid_t ac__type_new_; int main () { -if ((pid_t *) 0) +if ((ac__type_new_ *) 0) return 0; -if (sizeof (pid_t)) +if (sizeof (ac__type_new_)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -9890,12 +11175,13 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_type_pid_t=no + ac_cv_type_pid_t=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 -echo "${ECHO_T}$ac_cv_type_pid_t" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 +echo "${ECHO_T}$ac_cv_type_pid_t" >&6; } if test $ac_cv_type_pid_t = yes; then : else @@ -9906,8 +11192,8 @@ _ACEOF fi -echo "$as_me:$LINENO: checking for size_t" >&5 -echo $ECHO_N "checking for size_t... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for size_t" >&5 +echo $ECHO_N "checking for size_t... $ECHO_C" >&6; } if test "${ac_cv_type_size_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -9918,36 +11204,49 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default +typedef size_t ac__type_new_; int main () { -if ((size_t *) 0) +if ((ac__type_new_ *) 0) return 0; -if (sizeof (size_t)) +if (sizeof (ac__type_new_)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -9956,25 +11255,105 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_type_size_t=no + ac_cv_type_size_t=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 -echo "${ECHO_T}$ac_cv_type_size_t" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 +echo "${ECHO_T}$ac_cv_type_size_t" >&6; } if test $ac_cv_type_size_t = yes; then : else cat >>confdefs.h <<_ACEOF -#define size_t unsigned +#define size_t unsigned int +_ACEOF + +fi + +{ echo "$as_me:$LINENO: checking for ssize_t" >&5 +echo $ECHO_N "checking for ssize_t... $ECHO_C" >&6; } +if test "${ac_cv_type_ssize_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +typedef ssize_t ac__type_new_; +int +main () +{ +if ((ac__type_new_ *) 0) + return 0; +if (sizeof (ac__type_new_)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_ssize_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_type_ssize_t=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_type_ssize_t" >&5 +echo "${ECHO_T}$ac_cv_type_ssize_t" >&6; } +if test $ac_cv_type_ssize_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF +#define ssize_t int _ACEOF fi -AC_TYPE_SSIZE_T -echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 -echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 +echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; } if test "${ac_cv_header_time+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -9998,24 +11377,36 @@ return 0; } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -10024,12 +11415,13 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_header_time=no + ac_cv_header_time=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 -echo "${ECHO_T}$ac_cv_header_time" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 +echo "${ECHO_T}$ac_cv_header_time" >&6; } if test $ac_cv_header_time = yes; then cat >>confdefs.h <<\_ACEOF @@ -10038,8 +11430,8 @@ _ACEOF fi -echo "$as_me:$LINENO: checking for uid_t in sys/types.h" >&5 -echo $ECHO_N "checking for uid_t in sys/types.h... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for uid_t in sys/types.h" >&5 +echo $ECHO_N "checking for uid_t in sys/types.h... $ECHO_C" >&6; } if test "${ac_cv_type_uid_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10061,8 +11453,8 @@ fi rm -f conftest* fi -echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5 -echo "${ECHO_T}$ac_cv_type_uid_t" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5 +echo "${ECHO_T}$ac_cv_type_uid_t" >&6; } if test $ac_cv_type_uid_t = no; then cat >>confdefs.h <<\_ACEOF @@ -10078,8 +11470,8 @@ fi # Checks for library functions. -echo "$as_me:$LINENO: checking whether closedir returns void" >&5 -echo $ECHO_N "checking whether closedir returns void... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether closedir returns void" >&5 +echo $ECHO_N "checking whether closedir returns void... $ECHO_C" >&6; } if test "${ac_cv_func_closedir_void+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10101,19 +11493,28 @@ int closedir (); int main () { -exit (closedir (opendir (".")) != 0); +return closedir (opendir (".")) != 0; ; return 0; } _ACEOF rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -10126,11 +11527,13 @@ sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_closedir_void=yes fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + + fi -echo "$as_me:$LINENO: result: $ac_cv_func_closedir_void" >&5 -echo "${ECHO_T}$ac_cv_func_closedir_void" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_closedir_void" >&5 +echo "${ECHO_T}$ac_cv_func_closedir_void" >&6; } if test $ac_cv_func_closedir_void = yes; then cat >>confdefs.h <<\_ACEOF @@ -10139,8 +11542,8 @@ _ACEOF fi -echo "$as_me:$LINENO: checking for error_at_line" >&5 -echo $ECHO_N "checking for error_at_line... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for error_at_line" >&5 +echo $ECHO_N "checking for error_at_line... $ECHO_C" >&6; } if test "${ac_cv_lib_error_at_line+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10160,24 +11563,36 @@ error_at_line (0, 0, "", 0, ""); } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -10186,41 +11601,40 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_error_at_line=no + ac_cv_lib_error_at_line=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_lib_error_at_line" >&5 -echo "${ECHO_T}$ac_cv_lib_error_at_line" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_error_at_line" >&5 +echo "${ECHO_T}$ac_cv_lib_error_at_line" >&6; } if test $ac_cv_lib_error_at_line = no; then - case $LIBOBJS in - "error.$ac_objext" | \ - *" error.$ac_objext" | \ - "error.$ac_objext "* | \ + case " $LIBOBJS " in *" error.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS error.$ac_objext" ;; + *) LIBOBJS="$LIBOBJS error.$ac_objext" + ;; esac fi - -for ac_header in unistd.h vfork.h +for ac_header in vfork.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -10231,24 +11645,36 @@ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -10257,15 +11683,16 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no + ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -10274,8 +11701,13 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -10299,9 +11731,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi + rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in @@ -10325,25 +11758,24 @@ echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\ echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX + ( cat <<\_ASBOX ## ---------------------------------------------------- ## ## Report this to lcd4linux-users@lists.sourceforge.net ## ## ---------------------------------------------------- ## _ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then @@ -10360,9 +11792,9 @@ done for ac_func in fork vfork do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -10388,53 +11820,59 @@ cat >>conftest.$ac_ext <<_ACEOF #undef $ac_func -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +#if defined __stub_$ac_func || defined __stub___$ac_func choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != $ac_func; +return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -10443,13 +11881,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_var=no" + eval "$as_ac_var=no" fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 @@ -10459,8 +11899,8 @@ fi done if test "x$ac_cv_func_fork" = xyes; then - echo "$as_me:$LINENO: checking for working fork" >&5 -echo $ECHO_N "checking for working fork... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for working fork" >&5 +echo $ECHO_N "checking for working fork... $ECHO_C" >&6; } if test "${ac_cv_func_fork_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10468,27 +11908,40 @@ else ac_cv_func_fork_works=cross else cat >conftest.$ac_ext <<_ACEOF -/* By Ruediger Kuhlmann. */ - #include <sys/types.h> - #if HAVE_UNISTD_H - # include <unistd.h> - #endif - /* Some systems only have a dummy stub for fork() */ - int main () - { - if (fork() < 0) - exit (1); - exit (0); - } +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ + + /* By Ruediger Kuhlmann. */ + return fork () < 0; + + ; + return 0; +} _ACEOF rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -10501,11 +11954,13 @@ sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_fork_works=no fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + + fi -echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5 -echo "${ECHO_T}$ac_cv_func_fork_works" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5 +echo "${ECHO_T}$ac_cv_func_fork_works" >&6; } else ac_cv_func_fork_works=$ac_cv_func_fork @@ -10525,8 +11980,8 @@ echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross co fi ac_cv_func_vfork_works=$ac_cv_func_vfork if test "x$ac_cv_func_vfork" = xyes; then - echo "$as_me:$LINENO: checking for working vfork" >&5 -echo $ECHO_N "checking for working vfork... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for working vfork" >&5 +echo $ECHO_N "checking for working vfork... $ECHO_C" >&6; } if test "${ac_cv_func_vfork_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10540,14 +11995,8 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Thanks to Paul Eggert for this test. */ -#include <stdio.h> -#include <stdlib.h> -#include <sys/types.h> -#include <sys/stat.h> +$ac_includes_default #include <sys/wait.h> -#if HAVE_UNISTD_H -# include <unistd.h> -#endif #if HAVE_VFORK_H # include <vfork.h> #endif @@ -10619,7 +12068,7 @@ main () while (wait(&status) != child) ; - exit( + return ( /* Was there some problem with vforking? */ child < 0 @@ -10636,13 +12085,22 @@ main () } _ACEOF rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -10655,11 +12113,13 @@ sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_vfork_works=no fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + + fi -echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5 -echo "${ECHO_T}$ac_cv_func_vfork_works" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5 +echo "${ECHO_T}$ac_cv_func_vfork_works" >&6; } fi; if test "x$ac_cv_func_fork_works" = xcross; then @@ -10690,8 +12150,8 @@ _ACEOF fi if test $ac_cv_c_compiler_gnu = yes; then - echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 -echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 +echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6; } if test "${ac_cv_prog_gcc_traditional+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10732,8 +12192,8 @@ rm -f conftest* fi fi -echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 -echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 +echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6; } if test $ac_cv_prog_gcc_traditional = yes; then CC="$CC -traditional" fi @@ -10748,8 +12208,8 @@ fi #AC_FUNC_MALLOC #AC_FUNC_REALLOC -echo "$as_me:$LINENO: checking return type of signal handlers" >&5 -echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking return type of signal handlers" >&5 +echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6; } if test "${ac_cv_type_signal+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10761,64 +12221,69 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <sys/types.h> #include <signal.h> -#ifdef signal -# undef signal -#endif -#ifdef __cplusplus -extern "C" void (*signal (int, void (*)(int)))(int); -#else -void (*signal ()) (); -#endif int main () { -int i; +return *(signal (0, 0)) (0) == 1; ; return 0; } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_type_signal=void + ac_cv_type_signal=int else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_type_signal=int + ac_cv_type_signal=void fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 -echo "${ECHO_T}$ac_cv_type_signal" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 +echo "${ECHO_T}$ac_cv_type_signal" >&6; } cat >>confdefs.h <<_ACEOF #define RETSIGTYPE $ac_cv_type_signal _ACEOF -echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5 -echo $ECHO_N "checking whether lstat dereferences a symlink specified with a trailing slash... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5 +echo $ECHO_N "checking whether lstat dereferences a symlink specified with a trailing slash... $ECHO_C" >&6; } if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10842,19 +12307,28 @@ struct stat sbuf; /* Linux will dereference the symlink and fail. That is better in the sense that it means we will not have to compile and use the lstat wrapper. */ - exit (lstat ("conftest.sym/", &sbuf) ? 0 : 1); + return lstat ("conftest.sym/", &sbuf) == 0; ; return 0; } _ACEOF rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -10867,8 +12341,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_lstat_dereferences_slashed_symlink=no fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + + else # If the `ln -s' command failed, then we probably don't even # have an lstat function. @@ -10877,8 +12353,8 @@ fi rm -f conftest.sym conftest.file fi -echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 -echo "${ECHO_T}$ac_cv_func_lstat_dereferences_slashed_symlink" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 +echo "${ECHO_T}$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; } test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && @@ -10888,18 +12364,16 @@ _ACEOF if test $ac_cv_func_lstat_dereferences_slashed_symlink = no; then - case $LIBOBJS in - "lstat.$ac_objext" | \ - *" lstat.$ac_objext" | \ - "lstat.$ac_objext "* | \ + case " $LIBOBJS " in *" lstat.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS lstat.$ac_objext" ;; + *) LIBOBJS="$LIBOBJS lstat.$ac_objext" + ;; esac fi -echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5 -echo $ECHO_N "checking whether stat accepts an empty string... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5 +echo $ECHO_N "checking whether stat accepts an empty string... $ECHO_C" >&6; } if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10917,43 +12391,52 @@ int main () { struct stat sbuf; - exit (stat ("", &sbuf) ? 1 : 0); + return stat ("", &sbuf) == 0; ; return 0; } _ACEOF rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_func_stat_empty_string_bug=yes + ac_cv_func_stat_empty_string_bug=no else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) -ac_cv_func_stat_empty_string_bug=no +ac_cv_func_stat_empty_string_bug=yes fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + + fi -echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5 -echo "${ECHO_T}$ac_cv_func_stat_empty_string_bug" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5 +echo "${ECHO_T}$ac_cv_func_stat_empty_string_bug" >&6; } if test $ac_cv_func_stat_empty_string_bug = yes; then - case $LIBOBJS in - "stat.$ac_objext" | \ - *" stat.$ac_objext" | \ - "stat.$ac_objext "* | \ + case " $LIBOBJS " in *" stat.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS stat.$ac_objext" ;; + *) LIBOBJS="$LIBOBJS stat.$ac_objext" + ;; esac @@ -10967,9 +12450,9 @@ fi for ac_func in strftime do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -10995,53 +12478,59 @@ cat >>conftest.$ac_ext <<_ACEOF #undef $ac_func -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +#if defined __stub_$ac_func || defined __stub___$ac_func choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != $ac_func; +return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -11050,13 +12539,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_var=no" + eval "$as_ac_var=no" fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 @@ -11064,8 +12555,8 @@ _ACEOF else # strftime is in -lintl on SCO UNIX. -echo "$as_me:$LINENO: checking for strftime in -lintl" >&5 -echo $ECHO_N "checking for strftime in -lintl... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for strftime in -lintl" >&5 +echo $ECHO_N "checking for strftime in -lintl... $ECHO_C" >&6; } if test "${ac_cv_lib_intl_strftime+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -11078,40 +12569,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char strftime (); int main () { -strftime (); +return strftime (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -11120,14 +12623,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_intl_strftime=no + ac_cv_lib_intl_strftime=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_intl_strftime" >&5 -echo "${ECHO_T}$ac_cv_lib_intl_strftime" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_strftime" >&5 +echo "${ECHO_T}$ac_cv_lib_intl_strftime" >&6; } if test $ac_cv_lib_intl_strftime = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_STRFTIME 1 @@ -11139,8 +12643,8 @@ fi fi done -echo "$as_me:$LINENO: checking for working strtod" >&5 -echo $ECHO_N "checking for working strtod... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for working strtod" >&5 +echo $ECHO_N "checking for working strtod... $ECHO_C" >&6; } if test "${ac_cv_func_strtod+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -11154,7 +12658,10 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +$ac_includes_default +#ifndef strtod double strtod (); +#endif int main() { @@ -11165,7 +12672,7 @@ main() double value; value = strtod (string, &term); if (value != 69 || term != (string + 4)) - exit (1); + return 1; } { @@ -11175,20 +12682,29 @@ main() char *term; strtod (string, &term); if (term != string && *(term - 1) == 0) - exit (1); + return 1; } - exit (0); + return 0; } _ACEOF rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -11201,22 +12717,22 @@ sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_strtod=no fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + + fi -echo "$as_me:$LINENO: result: $ac_cv_func_strtod" >&5 -echo "${ECHO_T}$ac_cv_func_strtod" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_strtod" >&5 +echo "${ECHO_T}$ac_cv_func_strtod" >&6; } if test $ac_cv_func_strtod = no; then - case $LIBOBJS in - "strtod.$ac_objext" | \ - *" strtod.$ac_objext" | \ - "strtod.$ac_objext "* | \ + case " $LIBOBJS " in *" strtod.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS strtod.$ac_objext" ;; + *) LIBOBJS="$LIBOBJS strtod.$ac_objext" + ;; esac -echo "$as_me:$LINENO: checking for pow" >&5 -echo $ECHO_N "checking for pow... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for pow" >&5 +echo $ECHO_N "checking for pow... $ECHO_C" >&6; } if test "${ac_cv_func_pow+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -11243,53 +12759,59 @@ cat >>conftest.$ac_ext <<_ACEOF #undef pow -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char pow (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_pow) || defined (__stub___pow) +#if defined __stub_pow || defined __stub___pow choke me -#else -char (*f) () = pow; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != pow; +return pow (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -11298,17 +12820,18 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_func_pow=no + ac_cv_func_pow=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_func_pow" >&5 -echo "${ECHO_T}$ac_cv_func_pow" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_pow" >&5 +echo "${ECHO_T}$ac_cv_func_pow" >&6; } if test $ac_cv_func_pow = no; then - echo "$as_me:$LINENO: checking for pow in -lm" >&5 -echo $ECHO_N "checking for pow in -lm... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for pow in -lm" >&5 +echo $ECHO_N "checking for pow in -lm... $ECHO_C" >&6; } if test "${ac_cv_lib_m_pow+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -11321,40 +12844,52 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char pow (); int main () { -pow (); +return pow (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -11363,14 +12898,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_m_pow=no + ac_cv_lib_m_pow=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_m_pow" >&5 -echo "${ECHO_T}$ac_cv_lib_m_pow" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_m_pow" >&5 +echo "${ECHO_T}$ac_cv_lib_m_pow" >&6; } if test $ac_cv_lib_m_pow = yes; then POW_LIB=-lm else @@ -11407,9 +12943,9 @@ fi for ac_func in dup2 floor gethostbyname gettimeofday memset pow putenv regcomp socket sqrt strcasecmp strchr strcspn strdup strerror strncasecmp strndup strpbrk strrchr strstr strtol uname do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -11435,53 +12971,59 @@ cat >>conftest.$ac_ext <<_ACEOF #undef $ac_func -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +#if defined __stub_$ac_func || defined __stub___$ac_func choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != $ac_func; +return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -11490,13 +13032,15 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_var=no" + eval "$as_ac_var=no" fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 @@ -11506,7 +13050,7 @@ fi done - ac_config_files="$ac_config_files Makefile" +ac_config_files="$ac_config_files Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -11526,39 +13070,58 @@ _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. +# So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. -{ +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; + ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} | + esac | + sort +) | sed ' + /^ac_cv_env_/b end t clear - : clear + :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 +echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else - echo "not updating unwritable cache $cache_file" + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache @@ -11567,32 +13130,18 @@ test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs @@ -11644,11 +13193,35 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi +BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset @@ -11657,8 +13230,43 @@ else fi +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + # Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done PS1='$ ' PS2='> ' PS4='+ ' @@ -11672,18 +13280,19 @@ do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else - $as_unset $as_var + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false @@ -11691,159 +13300,120 @@ fi # Name of the executable. -as_me=`$as_basename "$0" || +as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` +# CDPATH. +$as_unset CDPATH -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi as_lineno_1=$LINENO as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop - s,-$,, - s,^['$as_cr_digits']*\n,, + s/-\n.*// ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" # Exit status is that of the last command. exit } -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: @@ -11852,7 +13422,19 @@ else as_mkdir_p=false fi -as_executable_p="test -f" +# Find out whether ``test -x'' works. Don't use a zero-byte file, as +# systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + as_executable_p="test -x" +else + as_executable_p=: +fi +rm -f conf$$.file # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -11861,31 +13443,14 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - exec 6>&1 -# Open the log real soon, to keep \$[0] and so on meaningful, and to +# Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - +# values after options handling. +ac_log=" This file was extended by LCD4Linux $as_me 0.10.1-CVS, which was -generated by GNU Autoconf 2.59. Invocation command line was +generated by GNU Autoconf 2.60. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -11893,30 +13458,20 @@ generated by GNU Autoconf 2.59. Invocation command line was CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + _ACEOF +cat >>$CONFIG_STATUS <<_ACEOF # Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi +_ACEOF cat >>$CONFIG_STATUS <<\_ACEOF - ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. @@ -11943,19 +13498,21 @@ Configuration commands: $config_commands Report bugs to <bug-autoconf@gnu.org>." -_ACEOF +_ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ LCD4Linux config.status 0.10.1-CVS -configured by $0, generated by GNU Autoconf 2.59, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" +configured by $0, generated by GNU Autoconf 2.60, + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright (C) 2006 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF @@ -11966,39 +13523,24 @@ while test $# != 0 do case $1 in --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; - -*) + *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; esac case $ac_option in # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift @@ -12008,18 +13550,24 @@ Try \`$0 --help' for more information." >&2;} $ac_shift CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + { echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} + -*) { echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; - *) ac_config_targets="$ac_config_targets $1" ;; + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; esac shift @@ -12035,37 +13583,49 @@ fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + CONFIG_SHELL=$SHELL + export CONFIG_SHELL + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi _ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + echo "$ac_log" +} >&5 +_ACEOF cat >>$CONFIG_STATUS <<_ACEOF # -# INIT-COMMANDS section. +# INIT-COMMANDS # - AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF + +# Handling of arguments. for ac_config_target in $ac_config_targets do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done + # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely @@ -12077,338 +13637,406 @@ if $ac_need_defaults; then fi # Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, +# simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. $debug || { - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } - # Create a (secure) tmp directory for tmp files. { - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - # -# CONFIG_FILES section. +# Set up the sed scripts for CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@CYGPATH_W@,$CYGPATH_W,;t t -s,@PACKAGE@,$PACKAGE,;t t -s,@VERSION@,$VERSION,;t t -s,@ACLOCAL@,$ACLOCAL,;t t -s,@AUTOCONF@,$AUTOCONF,;t t -s,@AUTOMAKE@,$AUTOMAKE,;t t -s,@AUTOHEADER@,$AUTOHEADER,;t t -s,@MAKEINFO@,$MAKEINFO,;t t -s,@install_sh@,$install_sh,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t -s,@mkdir_p@,$mkdir_p,;t t -s,@AWK@,$AWK,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@am__leading_dot@,$am__leading_dot,;t t -s,@AMTAR@,$AMTAR,;t t -s,@am__tar@,$am__tar,;t t -s,@am__untar@,$am__untar,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@DEPDIR@,$DEPDIR,;t t -s,@am__include@,$am__include,;t t -s,@am__quote@,$am__quote,;t t -s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t -s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t -s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t -s,@CCDEPMODE@,$CCDEPMODE,;t t -s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t -s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t -s,@CPP@,$CPP,;t t -s,@LN_S@,$LN_S,;t t -s,@CURSES_LIBS@,$CURSES_LIBS,;t t -s,@CURSES_INCLUDEDIR@,$CURSES_INCLUDEDIR,;t t -s,@EGREP@,$EGREP,;t t -s,@X_CFLAGS@,$X_CFLAGS,;t t -s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t -s,@X_LIBS@,$X_LIBS,;t t -s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t -s,@DRIVERS@,$DRIVERS,;t t -s,@DRVLIBS@,$DRVLIBS,;t t -s,@PLUGINS@,$PLUGINS,;t t -s,@PLUGINLIBS@,$PLUGINLIBS,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@POW_LIB@,$POW_LIB,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat +if test -n "$CONFIG_FILES"; then + +_ACEOF + + + +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + cat >conf$$subs.sed <<_ACEOF +SHELL!$SHELL$ac_delim +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim +PACKAGE_NAME!$PACKAGE_NAME$ac_delim +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim +PACKAGE_STRING!$PACKAGE_STRING$ac_delim +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim +exec_prefix!$exec_prefix$ac_delim +prefix!$prefix$ac_delim +program_transform_name!$program_transform_name$ac_delim +bindir!$bindir$ac_delim +sbindir!$sbindir$ac_delim +libexecdir!$libexecdir$ac_delim +datarootdir!$datarootdir$ac_delim +datadir!$datadir$ac_delim +sysconfdir!$sysconfdir$ac_delim +sharedstatedir!$sharedstatedir$ac_delim +localstatedir!$localstatedir$ac_delim +includedir!$includedir$ac_delim +oldincludedir!$oldincludedir$ac_delim +docdir!$docdir$ac_delim +infodir!$infodir$ac_delim +htmldir!$htmldir$ac_delim +dvidir!$dvidir$ac_delim +pdfdir!$pdfdir$ac_delim +psdir!$psdir$ac_delim +libdir!$libdir$ac_delim +localedir!$localedir$ac_delim +mandir!$mandir$ac_delim +DEFS!$DEFS$ac_delim +ECHO_C!$ECHO_C$ac_delim +ECHO_N!$ECHO_N$ac_delim +ECHO_T!$ECHO_T$ac_delim +LIBS!$LIBS$ac_delim +build_alias!$build_alias$ac_delim +host_alias!$host_alias$ac_delim +target_alias!$target_alias$ac_delim +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim +INSTALL_DATA!$INSTALL_DATA$ac_delim +CYGPATH_W!$CYGPATH_W$ac_delim +PACKAGE!$PACKAGE$ac_delim +VERSION!$VERSION$ac_delim +ACLOCAL!$ACLOCAL$ac_delim +AUTOCONF!$AUTOCONF$ac_delim +AUTOMAKE!$AUTOMAKE$ac_delim +AUTOHEADER!$AUTOHEADER$ac_delim +MAKEINFO!$MAKEINFO$ac_delim +install_sh!$install_sh$ac_delim +STRIP!$STRIP$ac_delim +INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim +mkdir_p!$mkdir_p$ac_delim +AWK!$AWK$ac_delim +SET_MAKE!$SET_MAKE$ac_delim +am__leading_dot!$am__leading_dot$ac_delim +AMTAR!$AMTAR$ac_delim +am__tar!$am__tar$ac_delim +am__untar!$am__untar$ac_delim +CC!$CC$ac_delim +CFLAGS!$CFLAGS$ac_delim +LDFLAGS!$LDFLAGS$ac_delim +CPPFLAGS!$CPPFLAGS$ac_delim +ac_ct_CC!$ac_ct_CC$ac_delim +EXEEXT!$EXEEXT$ac_delim +OBJEXT!$OBJEXT$ac_delim +DEPDIR!$DEPDIR$ac_delim +am__include!$am__include$ac_delim +am__quote!$am__quote$ac_delim +AMDEP_TRUE!$AMDEP_TRUE$ac_delim +AMDEP_FALSE!$AMDEP_FALSE$ac_delim +AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim +CCDEPMODE!$CCDEPMODE$ac_delim +am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim +am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim +CPP!$CPP$ac_delim +LN_S!$LN_S$ac_delim +CURSES_LIBS!$CURSES_LIBS$ac_delim +CURSES_INCLUDEDIR!$CURSES_INCLUDEDIR$ac_delim +GREP!$GREP$ac_delim +EGREP!$EGREP$ac_delim +XMKMF!$XMKMF$ac_delim +X_CFLAGS!$X_CFLAGS$ac_delim +X_PRE_LIBS!$X_PRE_LIBS$ac_delim +X_LIBS!$X_LIBS$ac_delim +X_EXTRA_LIBS!$X_EXTRA_LIBS$ac_delim +DRIVERS!$DRIVERS$ac_delim +DRVLIBS!$DRVLIBS$ac_delim +PLUGINS!$PLUGINS$ac_delim +PLUGINLIBS!$PLUGINLIBS$ac_delim +LIBOBJS!$LIBOBJS$ac_delim +POW_LIB!$POW_LIB$ac_delim +LTLIBOBJS!$LTLIBOBJS$ac_delim +_ACEOF + + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 92; then + break + elif $ac_last_try; then + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi -fi # test -n "$CONFIG_FILES" +done + +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +if test -n "$ac_eof"; then + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` + ac_eof=`expr $ac_eof + 1` +fi +cat >>$CONFIG_STATUS <<_ACEOF +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end +_ACEOF +sed ' +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +s/^/s,@/; s/!/@,|#_!!_#|/ +:n +t n +s/'"$ac_delim"'$/,g/; t +s/$/\\/; p +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +' >>$CONFIG_STATUS <conf$$subs.sed +rm -f conf$$subs.sed +cat >>$CONFIG_STATUS <<_ACEOF +:end +s/|#_!!_#|//g +CEOF$ac_eof _ACEOF + + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; +fi # test -n "$CONFIG_FILES" + + +for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +echo "$as_me: error: Invalid tag $ac_tag." >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + ac_file_inputs="$ac_file_inputs $ac_f" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input="Generated from "`IFS=: + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + fi + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin";; + esac + ;; esac - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || + ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } - ac_builddir=. -if test "$ac_dir" != .; then +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac + case $ac_mode in + :F) + # + # CONFIG_FILE + # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac +_ACEOF - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } +cat >>$CONFIG_STATUS <<\_ACEOF +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +case `sed -n '/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' $ac_file_inputs` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac _ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub @@ -12416,248 +14044,130 @@ _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_HEADER section. -# - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='[ ].*$,\1#\2' -ac_dC=' ' -ac_dD=',;t' -# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='$,\1#\2define\3' -ac_uC=' ' -ac_uD=',;t' - -for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +s&@configure_input@&$configure_input&;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +$ac_datarootdir_hack +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} + + rm -f "$tmp/stdin" case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; + -) cat "$tmp/out"; rm -f "$tmp/out";; + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; esac - - test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - # Do quote $f, to prevent DOS paths from being IFS'd. - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } - # Remove the trailing spaces. - sed 's/[ ]*$//' $ac_file_inputs >$tmp/in - -_ACEOF - -# Transform confdefs.h into two sed scripts, `conftest.defines' and -# `conftest.undefs', that substitutes the proper values into -# config.h.in to produce config.h. The first handles `#define' -# templates, and the second `#undef' templates. -# And first: Protect against being on the right side of a sed subst in -# config.status. Protect against being in an unquoted here document -# in config.status. -rm -f conftest.defines conftest.undefs -# Using a here document instead of a string reduces the quoting nightmare. -# Putting comments in sed scripts is not portable. -# -# `end' is used to avoid that the second main sed command (meant for -# 0-ary CPP macros) applies to n-ary macro definitions. -# See the Autoconf documentation for `clear'. -cat >confdef2sed.sed <<\_ACEOF -s/[\\&,]/\\&/g -s,[\\$`],\\&,g -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp -t end -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp -: end -_ACEOF -# If some macros were called several times there might be several times -# the same #defines, which is useless. Nevertheless, we may not want to -# sort them, since we want the *last* AC-DEFINE to be honored. -uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines -sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs -rm -f confdef2sed.sed - -# This sed command replaces #undef with comments. This is necessary, for + ;; + :H) + # + # CONFIG_HEADER + # +_ACEOF + +# Transform confdefs.h into a sed script `conftest.defines', that +# substitutes the proper values into config.h.in to produce config.h. +rm -f conftest.defines conftest.tail +# First, append a space to every undef/define line, to ease matching. +echo 's/$/ /' >conftest.defines +# Then, protect against being on the right side of a sed subst, or in +# an unquoted here document, in config.status. If some macros were +# called several times there might be several #defines for the same +# symbol, which is useless. But do not sort them, since the last +# AC_DEFINE must be honored. +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where +# NAME is the cpp macro being defined, VALUE is the value it is being given. +# PARAMS is the parameter list in the macro definition--in most cases, it's +# just an empty string. +ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' +ac_dB='\\)[ (].*,\\1define\\2' +ac_dC=' ' +ac_dD=' ,' + +uniq confdefs.h | + sed -n ' + t rset + :rset + s/^[ ]*#[ ]*define[ ][ ]*// + t ok + d + :ok + s/[\\&,]/\\&/g + s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p + s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p + ' >>conftest.defines + +# Remove the space that was appended to ease matching. +# Then replace #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. -cat >>conftest.undefs <<\_ACEOF -s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, -_ACEOF - -# Break up conftest.defines because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS -echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS -echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS -echo ' :' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.defines >/dev/null +# (The regexp can be short, since the line contains either #define or #undef.) +echo 's/ $// +s,^[ #]*u.*,/* & */,' >>conftest.defines + +# Break up conftest.defines: +ac_max_sed_lines=50 + +# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" +# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" +# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" +# et cetera. +ac_in='$ac_file_inputs' +ac_out='"$tmp/out1"' +ac_nxt='"$tmp/out2"' + +while : do - # Write a limited-size here document to $tmp/defines.sed. - echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS - # Speed up: don't consider the non `#define' lines. - echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS + # Write a here document: + cat >>$CONFIG_STATUS <<_ACEOF + # First, check the format of the line: + cat >"\$tmp/defines.sed" <<\\CEOF +/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def +/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def +b +:def +_ACEOF + sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS echo 'CEOF - sed -f $tmp/defines.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail + sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS + ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in + sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail + grep . conftest.tail >/dev/null || break rm -f conftest.defines mv conftest.tail conftest.defines done -rm -f conftest.defines -echo ' fi # grep' >>$CONFIG_STATUS -echo >>$CONFIG_STATUS - -# Break up conftest.undefs because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #undef templates' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.undefs >/dev/null -do - # Write a limited-size here document to $tmp/undefs.sed. - echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS - # Speed up: don't consider the non `#undef' - echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/undefs.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail - rm -f conftest.undefs - mv conftest.tail conftest.undefs -done -rm -f conftest.undefs +rm -f conftest.defines conftest.tail +echo "ac_result=$ac_in" >>$CONFIG_STATUS cat >>$CONFIG_STATUS <<\_ACEOF - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - echo "/* Generated by configure. */" >$tmp/config.h - else - echo "/* $ac_file. Generated by configure. */" >$tmp/config.h - fi - cat $tmp/in >>$tmp/config.h - rm -f $tmp/in if test x"$ac_file" != x-; then - if diff $ac_file $tmp/config.h >/dev/null 2>&1; then + echo "/* $configure_input */" >"$tmp/config.h" + cat "$ac_result" >>"$tmp/config.h" + if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - rm -f $ac_file - mv $tmp/config.h $ac_file + mv "$tmp/config.h" $ac_file fi else - cat $tmp/config.h - rm -f $tmp/config.h + echo "/* $configure_input */" + cat "$ac_result" fi + rm -f "$tmp/out12" # Compute $ac_file's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do @@ -12668,135 +14178,39 @@ for _am_header in $config_headers :; do _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done -echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || +echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X$ac_file : 'X\(//\)[^/]' \| \ X$ac_file : 'X\(//\)$' \| \ - X$ac_file : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X$ac_file : 'X\(/\)' \| . 2>/dev/null || echo X$ac_file | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'`/stamp-h$_am_stamp_count -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_COMMANDS section. -# -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_dir=`(dirname "$ac_dest") 2>/dev/null || -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_dest" : 'X\(//\)[^/]' \| \ - X"$ac_dest" : 'X\(//\)$' \| \ - X"$ac_dest" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_dest" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac + :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 +echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 -echo "$as_me: executing $ac_dest commands" >&6;} - case $ac_dest in - depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. @@ -12806,18 +14220,29 @@ echo "$as_me: executing $ac_dest commands" >&6;} # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`(dirname "$mf") 2>/dev/null || + dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$mf" : 'X\(/\)' \| . 2>/dev/null || echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` else continue fi @@ -12839,53 +14264,79 @@ echo X"$mf" | sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue - fdir=`(dirname "$file") 2>/dev/null || + fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$file" : 'X\(/\)' \| . 2>/dev/null || echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p $dirpart/$fdir - else - as_dir=$dirpart/$fdir + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 -echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } - # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; + esac -done -_ACEOF +done # for ac_tag -cat >>$CONFIG_STATUS <<\_ACEOF { (exit 0); exit 0; } _ACEOF @@ -1,19 +1,38 @@ #!/bin/sh -# # install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). + +scriptversion=2005-05-14.22 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. # -# Copyright 1991 by the Massachusetts Institute of Technology +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it @@ -23,13 +42,11 @@ # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. - # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" - # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" @@ -41,211 +58,266 @@ stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" -transformbasename="" -transform_arg="" -instcmd="$mvprog" chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" +chowncmd= +chgrpcmd= +stripcmd= rmcmd="$rmprog -f" mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - chmodcmd="" - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test -n "$1"; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit $?;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 shift + shift + continue;; - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit $?;; + + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; + esac done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi -fi && +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + src= + + if test -d "$dst"; then + mkdircmd=: + chmodcmd= + else + mkdircmd=$mkdirprog + fi + else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dst=$dst/`basename "$src"` + fi + fi + + # This sed command emulates the dirname command. + dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` + + # Make sure that the destination directory exists. + + # Skip lots of stat calls in the usual case. + if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + shift + IFS=$oIFS + + pathcomp= + + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # mkdir can fail with a `File exist' error in case several + # install-sh are creating the directory concurrently. This + # is OK. + test -d "$pathcomp" || exit + fi + pathcomp=$pathcomp/ + done + fi + + if test -n "$dir_arg"; then + $doit $mkdircmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } + + else + dstfile=`basename "$dst"` + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit 1 + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + } + } + fi || { (exit 1); exit 1; } +done -exit 0 +# The final little trick to "correctly" pass the exit status to the exit trap. +{ + (exit 0); exit 0 +} + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: @@ -1,7 +1,11 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -# Copyright (C) 1996, 1997, 2001, 2002 Free Software Foundation, Inc. -# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996. + +scriptversion=2005-06-08.21 + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -15,23 +19,47 @@ # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi +run=: + # In the cases where this matters, `missing' is being run in the # srcdir already. -if test -f configure.in; then +if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi +msg="missing on your system" + case "$1" in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; -h|--h|--he|--hel|--help) echo "\ @@ -43,6 +71,7 @@ error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' @@ -51,13 +80,19 @@ Supported PROGRAM values: automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file - yacc create \`y.tab.[ch]', if possible, from existing .[ch]" + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Send bug reports to <bug-automake@gnu.org>." + exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing - GNU libit 0.0" + echo "missing $scriptversion (GNU Automake)" + exit $? ;; -*) @@ -66,10 +101,45 @@ Supported PROGRAM values: exit 1 ;; +esac + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). +case "$1" in + lex|yacc) + # Not GNU programs, they don't have --version. + ;; + + tar) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in aclocal*) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acinclude.m4' or \`$configure_ac'. You might want +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 @@ -77,8 +147,8 @@ WARNING: \`$1' is missing on your system. You should only need it if autoconf) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`$configure_ac'. You might want to install the +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure @@ -86,11 +156,11 @@ WARNING: \`$1' is missing on your system. You should only need it if autoheader) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acconfig.h' or \`$configure_ac'. You might want +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' $configure_ac` + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do @@ -105,8 +175,8 @@ WARNING: \`$1' is missing on your system. You should only need it if automake*) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`$configure_ac'. +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | @@ -114,9 +184,32 @@ WARNING: \`$1' is missing on your system. You should only need it if while read f; do touch "$f"; done ;; + autom4te) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + bison|yacc) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." @@ -146,7 +239,7 @@ WARNING: \`$1' is missing on your system. You should only need it if lex|flex) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." @@ -167,28 +260,90 @@ WARNING: \`$1' is missing on your system. You should only need it if fi ;; + help2man) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + makeinfo) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 touch $file ;; + tar) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + *) echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequirements for installing + it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 @@ -196,3 +351,10 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your esac exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/mkinstalldirs b/mkinstalldirs index 8e6bb1c..259dbfc 100755 --- a/mkinstalldirs +++ b/mkinstalldirs @@ -1,40 +1,158 @@ #! /bin/sh # mkinstalldirs --- make directory hierarchy -# Author: Noah Friedman <friedman@prep.ai.mit.edu> -# Created: 1993-05-16 -# Public domain -# $Id: mkinstalldirs,v 1.2 2003/02/27 07:43:11 reinelt Exp $ +scriptversion=2005-06-29.22 + +# Original author: Noah Friedman <friedman@prep.ai.mit.edu> +# Created: 1993-05-16 +# Public domain. +# +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. errstatus=0 +dirmode= + +usage="\ +Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ... + +Create each directory DIR (with mode MODE, if specified), including all +leading file name components. + +Report bugs to <bug-automake@gnu.org>." + +# process command line arguments +while test $# -gt 0 ; do + case $1 in + -h | --help | --h*) # -h for help + echo "$usage" + exit $? + ;; + -m) # -m PERM arg + shift + test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } + dirmode=$1 + shift + ;; + --version) + echo "$0 $scriptversion" + exit $? + ;; + --) # stop option processing + shift + break + ;; + -*) # unknown option + echo "$usage" 1>&2 + exit 1 + ;; + *) # first non-opt arg + break + ;; + esac +done for file do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift + if test -d "$file"; then + shift + else + break + fi +done + +case $# in + 0) exit 0 ;; +esac + +# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and +# mkdir -p a/c at the same time, both will detect that a is missing, +# one will create a, then the other will try to create a and die with +# a "File exists" error. This is a problem when calling mkinstalldirs +# from a parallel make. We use --version in the probe to restrict +# ourselves to GNU mkdir, which is thread-safe. +case $dirmode in + '') + if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + echo "mkdir -p -- $*" + exec mkdir -p -- "$@" + else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + test -d ./-p && rmdir ./-p + test -d ./--version && rmdir ./--version + fi + ;; + *) + if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 && + test ! -d ./--version; then + echo "mkdir -m $dirmode -p -- $*" + exec mkdir -m "$dirmode" -p -- "$@" + else + # Clean up after NextStep and OpenStep mkdir. + for d in ./-m ./-p ./--version "./$dirmode"; + do + test -d $d && rmdir $d + done + fi + ;; +esac + +for file +do + case $file in + /*) pathcomp=/ ;; + *) pathcomp= ;; + esac + oIFS=$IFS + IFS=/ + set fnord $file + shift + IFS=$oIFS + + for d + do + test "x$d" = x && continue + + pathcomp=$pathcomp$d + case $pathcomp in + -*) pathcomp=./$pathcomp ;; + esac - pathcomp= - for d - do - pathcomp="$pathcomp$d" - case "$pathcomp" in - -* ) pathcomp=./$pathcomp ;; - esac + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" + mkdir "$pathcomp" || lasterr=$? - mkdir "$pathcomp" || lasterr=$? + if test ! -d "$pathcomp"; then + errstatus=$lasterr + else + if test ! -z "$dirmode"; then + echo "chmod $dirmode $pathcomp" + lasterr= + chmod "$dirmode" "$pathcomp" || lasterr=$? - if test ! -d "$pathcomp"; then - errstatus=$lasterr - fi - fi + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi + fi + fi - pathcomp="$pathcomp/" - done + pathcomp=$pathcomp/ + done done exit $errstatus -# mkinstalldirs ends here +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: |